A70PT3680260-M - KEMET Electronics Corporation

09/2008 64

A70

MKP Series

METALLIZED POLYPROPYLENE CAPACITOR

MULTIPURPOSE APPLICATIONS

Typical applications: temperature compensation circuits,

timing, oscillator circuits, power factor correction and

coupling capacitor in SMPS applications.

PRODUCT CODE: A70

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates: aluminium layer deposited by evaporation under

vacuum.

Winding: non-inductive type.

Leads: tinned wire.

Protection: polyester tape wrapping and thermosetting resin

end ll.

Marking: Manufacturer’s logo, series (1.70), dielectric

code (MKP), capacitance, tolerance, D.C. rated

voltage.

Climatic category: 55/105/56 IEC 60068-1

Operating temperature range: -55 to +105°C

Related documents: IEC 60384-16

Loose Taped

PRODUCT CODE SYSTEM

The part number, comprising 14 digits, is formed as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 14

A 7 0 -

Digit 1 to 3 Series code.

Digit 4 d.c. rated voltage:

G = 160V I = 250V M = 400V P = 630V

Digit 5 Length (mm):

F=11; H=14; K=20.5; Q=28; T=33

Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of

Capacitance value and the 6th digit indicates

the number of zeros that must be added to

obtain the Rated Capacitance in pF.

Digit 10 to 11 Mechanical version and/or packaging (table1)

Digit 12 Identies the dimensions and electrical

characteristics.

Digit 13 Internal use

Digit 14 Capacitance tolerance:

J=5%; K=10%; M=20%.

Table 1 (for more detailed information, please refer to page 14).

Standard

packaging style

Ordering code

(Digit 10 to 11)

Reel Ø 355 mm 26

Loose AA

single sided metallized

polypropylene lm

Winding scheme

D max 5 >5 ≤ 7 >7<16 ≥16

Ød ±0.05 0.5 0.6 0.8 1

All dimensions are in mm.

09/2008

Rated

Cap.

400Vdc/220Vac* Max

dv/dt

Max K0Part Number

D max L max (V/µs) (V2/µs)

6800 pF 5.0 11.0 25.0 20.0 E3 A70ΜF 1680--0--

0.010 µF 5.5 14.0 13.5 11.0 E3 A70MH 2100--0--

0.015 µF 6.0 14.0 13.5 11.0 E3 A70MH 2150--0--

0.022 µF 6.0 14.0 13.5 11.0 E3 A70MH 2220--0--

0.033 µF 6.5 14.0 13.5 11.0 E3 A70MH 2330--0--

0.047 µF 8.0 14.0 13.5 11.0 E3 A70MH 2470--0--

0.068 µF 7.0 20.5 10.0 8.0 E3 A70MK 2680--0--

0.10 µF 8.0 20.5 10.0 8.0 E3 A70MK 3100--0--

0.15 µF 8.0 28.0 6.5 5.2 E3 A70MQ3150--0--

0.22 µF 9.5 28.0 6.5 5.2 E3 A70MQ3220--0--

0.33 µF 11.0 28.0 6.5 5.2 E3 A70MQ3330--0--

0.47 µF 13.0 28.0 6.5 5.2 E3 A70MQ3470--0--

0.68 µF 13.5 33.0 4.0 3.2 E3 A70MT 3680--0--

1.0 µF 16.5 33.0 4.0 3.2 E3 A70MT 4100--0--

1.5 µF 20.0 33.0 4.0 3.2 E3 A70MT 4150--0--

Rated

Cap.

630Vdc/250Vac* Max

dv/dt

Max K0Part Number

D max L max (V/µs) (V2/µs)

1000 pF 5.0 11.0 30 38.0 E3 A70PF 1100--0--

1500 pF 5.0 11.0 30 38.0 E3 A70PF 1150--0--

2200 pF 5.0 11.0 30 38.0 E3 A70PF 1220--0--

3300 pF 5.0 11.0 30 38.0 E3 A70PF 1330--0--

4700 pF 5.0 11.0 30 38.0 E3 A70PF 1470--0--

6800 pF 5.5 14.0 20 25.0 E3 A70PH 1680--0--

0.010 µF 6.0 14.0 20 25.0 E3 A70PH 2100--0--

0.015 µF 7.0 14.0 20 25.0 E3 A70PH 2150--0--

0.022 µF 8.5 14.0 20 25.0 E3 A70PH 2220--0--

0.033 µF 7.5 20.5 15 19.0 E3 A70PK 2330--0--

0.047 µF 8.5 20.5 15 19.0 E3 A70PK 2470--0--

0.068 µF 8.5 28.0 10 13.0 E3 A70PQ 2680--0--

0.10 µF 10.0 28.0 10 13.0 E3 A70PQ 3100--0--

0.15 µF 11.5 28.0 10 13.0 E3 A70PQ 3150--0--

0.22 µF 12.5 33.0 6 7.6 E3 A70PT 3220--0--

0.33 µF 15.0 33.0 6 7.6 E3 A70PT 3330--0--

0.47 µF 17.5 33.0 6 7.6 E3 A70PT 3470--0--

0.68 µF 21.0 33.0 6 7.6 E3 A70PT 3680--0--

Rated

Cap.

160Vdc/90Vac Max

dv/dt

Max K0Part Number

D max L max (V/µs) (V2/µs)

0.022 µF 5.0 11.0 5 1.60 E3 A70GF 2220--0--

0.033 µF 5.0 11.0 5 1.60 E3 A70GF 2330--0--

0.047 µF 5.0 11.0 5 1.60 E3 A70GF 2470--0--

0.068 µF 5.5 14.0 5 1.60 E3 A70GH 2680--0--

0.10 µF 5.5 14.0 5 1.60 E3 A70GH 3100--0--

0.15 µF 6.5 14.0 5 1.60 E3 A70GH 3150--0--

0.22 µF 7.5 14.0 5 1.60 E3 A70GH 3220--0--

0.33 µF 7.0 20.5 3 0.96 E3 A70GK 3330--0--

0.47 µF 8.0 20.5 3 0.96 E3 A70GK 3470--0--

0.68 µF 8.0 28.0 2 0.64 E3 A70GQ 3680--0--

1.0 µF 9.5 28.0 2 0.64 E3 A70GQ 4100--0--

1.5 µF 11.0 28.0 2 0.64 E3 A70GQ 4150--0--

2.2 µF 12.0 33.0 1 0.32 E3 A70GT 4220--0--

3.3 µF 14.5 33.0 1 0.32 E3 A70GT 4330--0--

4.7 µF 17.0 33.0 1 0.32 E3 A70GT 4470--0--

Rated

Cap.

250Vdc/200Vac Max

dv/dt

Max K0Part Number

D max L max (V/µs) (V2/µs)

0.010 µF 5.0 11.0 11.0 5.5 E3 A70IF 2100--0--

0.015 µF 5.0 11.0 11.0 5.5 E3 A70IF 2150--0--

0.022 µF 5.5 14.0 10.0 5.0 E3 A70IH 2220--0--

0.033 µF 5.5 14.0 10.0 5.0 E3 A70IH 2330--0--

0.047 µF 6.0 14.0 10.0 5.0 E3 A70IH 2470--0--

0.068 µF 7.0 14.0 10.0 5.0 E3 A70IH 2680--0--

0.10 µF 8.5 14.0 10.0 5.0 E3 A70IH 3100--0--

0.15 µF 7.5 20.5 7.0 3.5 E3 A70IK 3150--0--

0.22 µF 9.0 20.5 7.0 3.5 E3 A70IK 3220--0--

0.33 µF 8.5 28.0 4.0 2.0 E3 A70IQ 3330--0--

0.47 µF 10.0 28.0 4.0 2.0 E3 A70IQ 3470--0--

0.68 µF 11.5 28.0 4.0 2.0 E3 A70IQ 3680--0--

1.0 µF 12.5 33.0 2.5 1.3 E3 A70IT 4100--0--

1.5 µF 15.0 33.0 2.5 1.3 E3 A70IT 4150--0--

2.2 µF 18.0 33.0 2.5 1.3 E3 A70IT 4220--0--

3.3 µF 21.5 33.0 2.5 1.3 E3 A70IT 4330--0--

A70

MKP Series

METALLIZED POLYPROPYLENE CAPACITOR

MULTIPURPOSE APPLICATIONS

PRODUCT CODE: A70

All dimensions are in mm.

Note 1: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case

the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse

characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above

table. The dv/dt test is carried out at 2 times the above values.

Note 2: Special version for line applications (rated voltage 250 Vac) available upon request.

* Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%) Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

09/2008 66

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions

Temperature: +40°C±2°C

Relative humidity (RH): 93% ±2%

Test duration: 56 days

Performance

Capacitance change |∆C/C|: ≤2%

DF change (∆tgδ): ≤10x10-4 at 1kHz

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +85°C±2°C

Test duration: 2000 h

Voltage applied: 1.25xVR

Performance

Capacitance change |∆C/C|: ≤3%

DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF

≤10x10-4 att01kHz for C>1µF

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C±5°C

Dipping time (with heat screen):10 s ±1 s

Performance

Capacitance change |∆C/C|: ≤1%

DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF

≤10x10-4 att01kHz for C>1µF

Insulation resistance: ≥ initial limit.

Long term stability (after two years):

Storage: standard environmental conditions (see page 12).

Performance

Capacitance change |∆C/C|: ≤0.5%

ELECTRICAL CHARACTERISTICS

Rated voltage (VR): 160 Vdc - 250Vdc

400 Vdc - 630 Vdc

Rated temperature (TR): +85°C

Temperature derated voltage:

for temperatures between +85°C and +105°C a decreasing

factor of 1.25% per degree °C on the rated voltage VR

(d.c. and a.c.) has to be applied.

Capacitance range: 1000pF to 4.7µF

Capacitance values:

E6 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±5% (J); ±10% (K); ±20% (M).

Total self-inductance (L):

max 1 nH per 1 mm lead and capacitor length.

Dissipation factor (DF):

tgδx10-4 at +25°C ±5°C

kHz C<0.1 µF 0.1 µF to 1 µF >1 µF

100

≤06

≤10

≤30

≤06

≤20

≤06

Insulation resistance:

Test conditions

Temperature: +25°C± 5°C

Voltage charge time: 1 min

Voltage charge: 100Vdc

Performance

≥1x105 MΩ for C ≤ 0.33 µF (5x105 MΩ)*

≥30000 s for C > 0.33 µF (150000 s)*

*Typical value

Test voltage between terminations:

1.6xVR applied for 2 s at +25°C ±5°C.

A70

MKP Series

METALLIZED POLYPROPYLENE CAPACITOR

MULTIPURPOSE APPLICATIONS

PRODUCT CODE: A70

09/2008

MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

A70

MKP Series

METALLIZED POLYPROPYLENE CAPACITOR

MULTIPURPOSE APPLICATIONS

PRODUCT CODE: A70

09/2008 68

MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

A70

MKP Series

METALLIZED POLYPROPYLENE CAPACITOR

MULTIPURPOSE APPLICATIONS

PRODUCT CODE: A70

Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –

and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.