©2005 Fairchild Semiconductor Corporation RFG70N06, RFP70N06, RF1S70N06, RF1S70N06SM Rev. D
Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified RFG70N06, RFP70N06
RF1S70N06, RF1S70N06SM UNITS
Drain to Source Voltage (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS 60 V
Drain to Gate Voltage (RGS = 20kΩ) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . .VDGR 60 V
Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID
Pulse d D ra in Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I DM 70
Re fe r to Pe ak Cu rr en t Curv e A
Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS ±20 V
Singl e P u l se Avalanch e R a t in g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Refer to UIS Curve A
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
1.0 W
W/oC
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG -55 to 175 oC
Maximum Temperature for Soldering
Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . .TL
P ackage Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg 300
260
oC
oC
CAUTION: St resses above those l isted in “A bsolute Maximu m Rating s” may cause per manent d amage to t he device. This is a stress on ly rating and operatio n of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. TJ = 25oC to 150oC.
Electrical Specifications TC = 25oC, Unless Otherwise Specified
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
Drain to Source Breakdown Voltage BVDSS ID = 250µA, VGS = 0V (Figure 11) 60 - - V
Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250µA (Figure 10) 2 - 4 V
Zero Gate Voltage Drain Current IDSS VDS = 60V, VGS = 0V - - 1 µA
VDS = 0.8 x Rated BVDSS, TC = 150oC--25µA
Gate to Source Leakage Current IGSS VGS = ±20V - - ±100 nA
Drain to Source On Resistance (Note 2) rDS(ON) ID = 70A, VGS = 10V (Figure 9) - - 0.014 Ω
Turn-On Time t(ON) VDD = 30V, ID ≈ 70A, RL = 0.43Ω,
VGS = 10V, RGS = 2.5Ω
(Figure 13)
- - 190 ns
Turn-On Delay Time td(ON) -10- ns
Rise Time tr- 137 - ns
Turn-Off Delay Time td(OFF) -32- ns
Fall Ti me tf-24- ns
Turn-Off Time t(OFF) - - 73 ns
Total Gate Charge Qg(TOT) VGS = 0V to 20V VDD = 48V, ID = 70A,
RL = 0.68Ω
Ig(REF) = 2.2mA
(Figure 13)
- 120 156 nC
Gate Charge at 10V Qg(10) VGS = 0V to 10V - 65 85 nC
Threshold Gate Charge Qg(TH) VGS = 0V to 2V - 5.0 6.5 nC
Input Capacitance CISS VDS = 25V, VGS = 0V, f = 1 MHz
(Figure 12) - 2250 - pF
Output Capacitance COSS - 792 - pF
Reverse Transfer Capacitance CRSS - 206 - pF
Thermal Resistance, Junction to Case RθJC --1.0
oC/W
Thermal Resistance, Junction to Ambient RθJA TO-220 and TO-263 - - 62 oC/W
TO-247 - - 30 oC/W
Sour ce to Drain Diode Specificatio ns
PARAMETER SYMBOL TEST CONDITIONS MIN TYP M AX UNITS
Source to Drain Diode Voltage VSD ISD = 70A - 1.5 V
Reverse Recovery Time trr ISD = 70A, dISD/dt = 100A/µs - 52 ns
NOTES:
2. Pulse test: pulse width ≤ 300ms, duty cycle ≤ 2%.
3. Repetitive rating: pulse width is limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3) and Peak Current
Capability Curve (Figure 5).
RFG70N06, RFP70N06, RF1S70N06, RF1S70N06SM