Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/, use http://www.nexperia.com Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - (c) NXP N.V. (year). All rights reserved or (c) Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - (c) Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia 74LV4051 8-channel analog multiplexer/demultiplexer Rev. 6 -- 17 March 2016 Product data sheet 1. General description The 74LV4051 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). It is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC4051 and 74HCT4051. With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2. VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 1.0 V to 6.0 V. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit. VCC VEE may not exceed 6.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground). 2. Features and benefits Optimized for low-voltage applications: 1.0 V to 6.0 V Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V Low ON resistance: 145 (typical) at VCC VEE = 2.0 V 80 (typical) at VCC VEE = 3.0 V 60 (typical) at VCC VEE = 4.5 V Logic level translation: To enable 3 V logic to communicate with 3 V analog signals Typical `break before make' built in ESD protection: HBM JESD22-A114E exceeds 2000 V MM JESD22-A115-A exceeds 200 V Multiple package options Specified from 40 C to +85 C and from 40 C to +125 C 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LV4051D 40 C to +125 C SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 74LV4051DB 40 C to +125 C SSOP16 plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 74LV4051PW 40 C to +125 C TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 74LV4051BQ 40 C to +125 C DHVQFN16 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5 3.5 0.85 mm SOT763-1 4. Functional diagram 9&& < 6 < < 6 < /2*,& /(9(/ &219(56,21 < 2) '(&2'(5 6 < < ( < = *1' Fig 1. 9(( DDG Functional diagram 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 2 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 6 6 6 ( ; * < < 08;'08; < < < < < < = DDG DDG Fig 2. Logic symbol Fig 3. IEC logic symbol < 9(( 9&& 9&& 9&& 9&& 9(( IURP ORJLF 9(( = DDG Fig 4. Schematic diagram (one switch) 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 3 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 5. Pinning information 5.1 Pinning < WHUPLQDO LQGH[DUHD 9&& /9 /9 < < = < < 9&& < < < < = < < < < < ( < < ( 6 9(( 9(( 6 *1' 6 6 6 6 *1' 9&& DDN 7UDQVSDUHQWWRSYLHZ DDN (1) This is not a supply pin. The substrate is attached to this pad using conductive die attach material. There is no electrical or mechanical requirement to solder this pad. However, if it is soldered, the solder land should remain floating or be connected to VCC. Fig 5. Pin configuration SOT109-1, SOT338-1 and SOT403-1 Fig 6. Pin configuration for SOT763-1 5.2 Pin description Table 2. Pin description Symbol Pin Description E 6 enable input (active LOW) VEE 7 supply voltage GND 8 ground supply voltage S0, S1, S2 11, 10, 9 select input Y0, Y1, Y2, Y3, Y4, Y5, Y6, Y7 13, 14, 15, 12, 1, 5, 2, 4 independent input or output Z 3 common output or input VCC 16 supply voltage 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 4 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 6. Functional description 6.1 Function table Table 3. Function table[1] Input Channel ON E S2 S1 S0 L L L L Y0 to Z L L L H Y1 to Z L L H L Y2 to Z L L H H Y3 to Z L H L L Y4 to Z L H L H Y5 to Z L H H L Y6 to Z L H H H Y7 to Z H X X X switches off [1] H = HIGH voltage level; L = LOW voltage level; X = don't care. 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground). Symbol Parameter Conditions supply voltage VCC Min Max Unit [1] 0.5 +7.0 V input clamping current VI < 0.5 V or VI > VCC + 0.5 V [2] - 20 mA ISK switch clamping current VSW < 0.5 V or VSW > VCC + 0.5 V [2] - 20 mA ISW switch current VSW > 0.5 V or VSW < VCC + 0.5 V; source or sink current [2] - 25 mA Tstg storage temperature 65 +150 C Tamb = 40 C to +125 C [3] SO16 package - 500 mW TSSOP16 package - 500 mW DHVQFN16 package - 500 mW IIK total power dissipation Ptot [1] To avoid drawing VCC current out of terminal Z, when switch current flows into terminals Yn, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out of terminals Yn, and in this case there is no limit for the voltage drop across the switch, but the voltages at Yn and Z may not exceed VCC or VEE. [2] The minimum input voltage rating may be exceeded if the input current rating is observed. [3] For SO16 packages: above 70 C the value of Ptot derates linearly with 8 mW/K. For SSOP16 and TSSOP16 packages: above 60 C the value of Ptot derates linearly with 5.5 mW/K. For DHVQFN16 packages: above 60 C the value of Ptot derates linearly with 4.5 mW/K. 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 5 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 8. Recommended operating conditions Table 5. Recommended operating conditions[1] Symbol Parameter Conditions Min Typ Max VCC supply voltage see Figure 7 1 3.3 6 V VI input voltage 0 - VCC V VSW switch voltage Tamb ambient temperature t/V [1] Unit 0 - VCC V 40 - +125 C input transition rise and fall rate VCC = 1.0 V to 2.0 V - - 500 ns/V VCC = 2.0 V to 2.7 V - - 200 ns/V VCC = 2.7 V to 3.6 V - - 100 ns/V in free air The static characteristics are guaranteed from VCC = 1.2 V to 6.0 V, but LV devices are guaranteed to function down to VCC = 1.0 V (with input levels GND or VCC). DDN 9&&*1' 9 RSHUDWLQJDUHD Fig 7. 9&&9(( 9 Guaranteed operating area as a function of the supply voltages 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 6 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 9. Static characteristics Table 6. Static characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter HIGH-level input voltage VIH LOW-level input voltage VIL input leakage current II IS(OFF) IS(ON) OFF-state leakage current ON-state leakage current supply current ICC ICC additional supply current CI input capacitance Csw switch capacitance [1] 40 C to +85 C Conditions 40 C to +125 C Unit Min Typ[1] Max Min Max VCC = 1.2 V 0.9 - - 0.9 - V VCC = 2.0 V 1.4 - - 1.4 - V VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V VCC = 4.5 V 3.15 - - 3.15 - V VCC = 6.0 V 4.20 - - 4.20 - V VCC = 1.2 V - - 0.3 - 0.3 V VCC = 2.0 V - - 0.6 - 0.6 V VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V VCC = 4.5 V - - 1.35 - 1.35 V VCC = 6.0 V - - 1.80 - 1.80 V VCC = 3.6 V - - 1.0 - 1.0 A VCC = 6.0 V - - 2.0 - 2.0 A VCC = 3.6 V - - 1.0 - 1.0 A VCC = 6.0 V - - 2.0 - 2.0 A VCC = 3.6 V - - 1.0 - 1.0 A VCC = 6.0 V - - 2.0 - 2.0 A VCC = 3.6 V - - 20 - 40 A VCC = 6.0 V - - 40 - 80 A per input; VI = VCC 0.6 V; VCC = 2.7 V to 3.6 V - - 500 - 850 A - 3.5 - - - pF independent pins Yn - 5 - - - pF common pin Z - 25 - - - pF VI = VCC or GND VI = VIH or VIL; see Figure 8 VI = VIH or VIL; see Figure 9 VI = VCC or GND; IO = 0 A Typical values are measured at Tamb = 25 C. 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 7 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 9.1 Test circuits 9&& 9&& 6WR6 9,+RU9,/ 6WR6 9,+RU9,/ <Q = ,6 <Q = ( ,6 *1' 9(( 9&& *1' 9(( *1' 92 ,6 ( 9, 9, 92 DDN DDN VI = VCC or VEE and VO = VEE or VCC. Fig 8. VI = VCC or VEE and VO = open circuit. Test circuit for measuring OFF-state leakage current Fig 9. Test circuit for measuring ON-state leakage current 9.2 ON resistance Table 7. ON resistance At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for graphs see Figure 10 and Figure 11. Symbol Parameter RON(peak) ON resistance (peak) 40 C to +85 C Conditions [2] VCC = 2.0 V; ISW = 1000 A Min Max - - - - - - 145 325 - 375 - 90 200 - 235 VCC = 3.0 V to 3.6 V; ISW = 1000 A - 80 180 - 210 VCC = 4.5 V; ISW = 1000 A - 60 135 - 160 VCC = 6.0 V; ISW = 1000 A - 55 125 - 145 - - - - - - 5 - - - [2] VCC = 2.0 V; ISW = 1000 A Product data sheet Max VCC = 2.7 V; ISW = 1000 A ON resistance mismatch VI = 0 V to VCC VEE between channels VCC = 1.2 V; ISW = 100 A 74LV4051 Min VI = 0 V to VCC VEE VCC = 1.2 V; ISW = 100 A RON 40 C to +125 C Unit Typ[1] VCC = 2.7 V; ISW = 1000 A - 4 - - - VCC = 3.0 V to 3.6 V; ISW = 1000 A - 4 - - - VCC = 4.5 V; ISW = 1000 A - 3 - - - VCC = 6.0 V; ISW = 1000 A - 2 - - - All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 8 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer Table 7. ON resistance ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for graphs see Figure 10 and Figure 11. Symbol RON(rail) Parameter ON resistance (rail) 40 C to +85 C Conditions Min Max Min Max - 225 - - - VCC = 2.0 V; ISW = 1000 A - 110 235 - 270 VCC = 2.7 V; ISW = 1000 A - 70 145 - 165 VCC = 3.0 V to 3.6 V; ISW = 1000 A - 60 130 - 150 VCC = 4.5 V; ISW = 1000 A - 45 100 - 115 VCC = 6.0 V; ISW = 1000 A - 40 85 - 100 - 250 - - - VCC = 2.0 V; ISW = 1000 A - 120 320 - 370 VCC = 2.7 V; ISW = 1000 A - 75 195 - 225 VCC = 3.0 V to 3.6 V; ISW = 1000 A - 70 175 - 205 VCC = 4.5 V; ISW = 1000 A - 50 130 - 150 VCC = 6.0 V; ISW = 1000 A - 45 120 - 135 VI = GND VCC = 1.2 V; ISW = 100 A RON(rail) ON resistance (rail) 40 C to +125 C Unit Typ[1] [2] VI = VCC VEE VCC = 1.2 V; ISW = 100 A [2] [1] Typical values are measured at Tamb = 25 C. [2] When supply voltages (VCC VEE) near 1.2 V the analog switch ON resistance becomes extremely non-linear. When using a supply of 1.2 V, it is recommended to use these devices only for transmitting digital signals. 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 9 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 9.3 On resistance waveform and test circuit 9 96: 9&& 6WR6 9,+RU9,/ = <Q ( *1' 9(( *1' ,6: 9, DDN RON = VSW / ISW. Fig 10. Test circuit for measuring RON DDN 521 9&& 9 9&& 9 9&& 9 9, 9 Vi = 0 V to VCC VEE Fig 11. Typical RON as a function of input voltage 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 10 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 10. Dynamic characteristics Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 14. Symbol Parameter tpd 40 C to +85 C Conditions Min Max Min Max VCC = 1.2 V - 25 - - - ns VCC = 2.0 V - 9 17 - 20 ns - 6 13 - 15 ns propagation delay Yn to Z, Z to Yn; see Figure 12 VCC = 3.0 V to 3.6 V [3] - 5 10 - 12 ns - 4 9 - 10 ns - 3 8 - 8 ns VCC = 1.2 V - 145 - - - ns VCC = 2.0 V - 49 94 - 112 ns - 36 69 - 83 ns - 23 - - - ns VCC = 4.5 V VCC = 6.0 V enable time E to Yn, Z; see Figure 13 [2] VCC = 2.7 V VCC = 3.0 V to 3.6 V; CL = 15 pF [3] VCC = 3.0 V to 3.6 V [3] - 28 55 - 66 ns - 25 47 - 56 ns - 19 38 - 43 ns VCC = 1.2 V - 140 - - - ns VCC = 2.0 V - 48 90 - 107 ns - 35 66 - 79 ns - 22 - - - ns VCC = 4.5 V VCC = 6.0 V Sn to Yn; see Figure 13 [2] VCC = 2.7 V 74LV4051 Product data sheet Unit [2] VCC = 2.7 V ten 40 C to +125 C Typ[1] VCC = 3.0 V to 3.6 V; CL = 15 pF [3] VCC = 3.0 V to 3.6 V [3] - 27 53 - 63 ns VCC = 4.5 V - 24 45 - 54 ns VCC = 6.0 V - 18 34 - 41 ns All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 11 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer Table 8. Dynamic characteristics ...continued Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 14. Symbol Parameter tdis disable time 40 C to +85 C Conditions Min VCC = 1.2 V - 145 - - - ns VCC = 2.0 V - 51 93 - 110 ns - 38 69 - 82 ns - 25 - - - ns E to Yn, Z; see Figure 13 VCC = 3.0 V to 3.6 V; CL = 15 pF [3] VCC = 3.0 V to 3.6 V [3] Max 30 56 - 66 ns 29 48 - 56 ns - 21 37 - 44 ns VCC = 1.2 V - 115 - - - ns VCC = 2.0 V - 41 73 - 90 ns - 31 54 - 67 ns - 20 - - - ns Sn to Yn; see Figure 13 [2] VCC = 2.7 V VCC = 3.0 V to 3.6 V; CL = 15 pF [3] VCC = 3.0 V to 3.6 V [3] VCC = 4.5 V VCC = 6.0 V [2] Min - VCC = 6.0 V [1] Max - VCC = 4.5 V power dissipation capacitance Unit [2] VCC = 2.7 V CPD 40 C to +125 C Typ[1] CL = 50 pF; fi = 1 MHz; VI = GND to VCC [4] - 24 44 - 54 ns - 22 37 - 46 ns - 17 29 - 36 ns - 25 - - - pF All typical values are measured at Tamb = 25 C. tpd is the same as tPLH and tPHL. ten is the same as tPZL and tPZH. tdis is the same as tPLZ and tPHZ. [3] Typical values are measured at nominal supply voltage (VCC = 3.3 V). [4] CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD VCC2 fi N + ((CL + CSWVCC2 fo) where: fi = input frequency in MHz, fo = output frequency in MHz CL = output load capacitance in pF CSW = maximum switch capacitance in pF; VCC = supply voltage in Volts N = number of inputs switching (CL VCC2 fo) = sum of the outputs. 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 12 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 10.1 Waveforms 9&& <QRU= LQSXW 90 9(( W3/+ W3+/ 92 =RU<Q RXWSXW 90 9(( DDN Measurement points are given in Table 9. VOL and VOH are typical voltage output levels that occur with the output load. Fig 12. Propagation delay input (Yn or Z) to output (Z or Yn) 9&& 6Q(LQSXW 90 966 W3/= <QRU=RXWSXW /2:WR2)) 2))WR/2: W3=/ 92 9(( W3+= 92 W3=+ <QRU=RXWSXW +,*+WR2)) 2))WR+,*+ 9(( VZLWFK21 VZLWFK2)) VZLWFK21 DDN Measurement points are given in Table 9. VOL and VOH are typical voltage output levels that occur with the output load. Fig 13. Enable and disable times Table 9. Measurement points Supply voltage Input Output VCC VM VM VX VY < 2.7 V 0.5VCC 0.5VCC VOL + 0.1VCC VOH 0.1VCC 2.7 V to 3.6 V 1.5 V 1.5 V VOL + 0.3 V VOH 0.3 V > 3.6 V 0.5VCC 0.5VCC VOL + 0.1VCC VOH 0.1VCC 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 13 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 9, W: QHJDWLYH SXOVH 90 9 WI WU WU WI 9, SRVLWLYH SXOVH 9 90 90 90 W: 9(;7 9&& * 9, 5/ 92 '87 57 9(( &/ 5/ DDN Test data is given in Table 10. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig 14. Test circuit for measuring switching times Table 10. Test data Supply voltage Input VCC VI tr, tf CL RL tPHL, tPLH tPZH, tPHZ tPZL, tPLZ < 2.7 V VCC 6 ns 50 pF 1 k open VEE 2VCC 2.7 V to 3.6 V 2.7 V 6 ns 15 pF, 50 pF 1 k open VEE 2VCC > 3.6 V VCC 6 ns 50 pF 1 k open VEE 2VCC 74LV4051 Product data sheet Load VEXT All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 14 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 10.2 Additional dynamic parameters Table 11. Additional dynamic characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V); VI = GND or VCC (unless otherwise specified); tr = tf 6.0 ns; Tamb = 25 C. Symbol Parameter Conditions THD fi = 1 kHz; CL = 50 pF; RL = 10 k; see Figure 19 total harmonic distortion Min Typ Max Unit VCC = 3.0 V; VI = 2.75 V (p-p) - 0.8 - % VCC = 6.0 V; VI = 5.5 V (p-p) - 0.4 - % VCC = 3.0 V; VI = 2.75 V (p-p) - 2.4 - % VCC = 6.0 V; VI = 5.5 V (p-p) - 1.2 - % - 180 - MHz - 200 - MHz - 50 - dB - 50 - dB VCC = 3.0 V - 0.11 - V VCC = 6.0 V - 0.12 - V VCC = 3.0 V - 60 - dB VCC = 6.0 V - 60 - dB fi = 10 kHz; CL = 50 pF; RL = 10 k; see Figure 19 f(3dB) 3 dB frequency response CL = 50 pF; RL = 50 ; see Figure 15 isolation (OFF-state) fi = 1 MHz; CL = 50 pF; RL = 600 ; see Figure 17 [1] VCC = 3.0 V VCC = 6.0 V iso [2] VCC = 3.0 V VCC = 6.0 V crosstalk voltage Vct Xtalk crosstalk between digital inputs and switch; fi = 1 MHz; CL = 50 pF; RL = 600 ; see Figure 20 between switches; fi = 1 MHz; CL = 50 pF; RL = 600 ; see Figure 21 [1] Adjust fi voltage to obtain 0 dBm level at output for 1 MHz (0 dBm = 1 mW into 50 ). [2] Adjust fi voltage to obtain 0 dBm level at output for 1 MHz (0 dBm = 1 mW into 600 ). 74LV4051 Product data sheet [2] All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 15 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 10.2.1 Test circuits DDN G% 9&& 9,+RU9,/ 9&& 6WR6 5/ <Q = ( ) *1' 9(( *1' 5/ &/ G% IL I N+] DDN VCC = 3.0 V; GND = 0 V; VEE = -3.0 V; RL = 50 ; RSOURCE = 1 k. Fig 15. Test circuit for measuring frequency response Fig 16. Typical frequency response DDN G% 9&& 9,+RU9,/ 6WR6 ) 5/ <Q = 9&& 9&& ( *1' 9(( 5/ &/ G% IL I N+] DDN VCC = 3.0 V; GND = 0 V; VEE = -3.0 V; RL = 50 ; RSOURCE = 1 k. Fig 17. Test circuit for measuring isolation (OFF-state) 74LV4051 Product data sheet Fig 18. Typical isolation (OFF-state) as function of frequency All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 16 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 9&& 9&& 6WR6 9,+RU9,/ 5/ <Q = ( ) *1' 9(( *1' 5/ ' &/ IL DDN Fig 19. Test circuit for measuring total harmonic distortion 9&& 9&& 5/ 9&& 6WR6 = 5/ <Q ( 5/ * *1' 9(( 9,+RU9,/ 5/ &/ 9 92 DDN a. Test circuit ORJLF LQSXW 6Q( RII RQ RII 92 9FW DDM b. Input and output pulse definitions VI may be connected to Sn or E. Fig 20. Test circuit for measuring crosstalk voltage between digital inputs and switch 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 17 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 9&& 9,+RU9,/ 5/ 9&& 6WR6 < = <Q 9&& 5/ 5/ ( ) *1' 9(( *1' 5/ 92 &/ 5/ G% 9, DDN a. Switch closed condition 9&& 9&& 5/ 9,+RU9,/ 9&& 6WR6 < = <Q 9&& 5/ 5/ ( *1' 9(( *1' 5/ 5/ 92 9, 5/ &/ G% DDN b. Switch open condition Fig 21. Test circuit for measuring crosstalk between switches 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 18 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 11. Package outline 62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627 ' ( $ ; F \ +( Y 0 $ = 4 $ $ $ $ SLQLQGH[ /S / H Z 0 ES GHWDLO; PP VFDOH ',0(16,216 LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV 81,7 $ PD[ $ $ $ ES F ' ( H +( / /S 4 Y Z \ = PP LQFKHV R R 1RWH 3ODVWLFRUPHWDOSURWUXVLRQVRIPP LQFK PD[LPXPSHUVLGHDUHQRWLQFOXGHG 5()(5(1&(6 287/,1( 9(56,21 ,(& -('(& 627 ( 06 -(,7$ (8523($1 352-(&7,21 ,668('$7( Fig 22. Package outline SOT109-1 (SO16) 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 19 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 6623SODVWLFVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP ' 627 ( $ ; F \ +( Y 0 $ = 4 $ $ $ $ SLQLQGH[ /S / GHWDLO; Z 0 ES H PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ PD[ $ $ $ ES F ' ( H +( / /S 4 Y Z \ = PP R R 1RWH 3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 287/,1( 9(56,21 627 5()(5(1&(6 ,(& -('(& -(,7$ (8523($1 352-(&7,21 ,668('$7( 02 Fig 23. Package outline SOT338-1 (SSOP16) 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 20 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP ' 627 ( $ ; F \ +( Y 0 $ = 4 $ SLQLQGH[ $ $ $ /S / H GHWDLO; Z 0 ES PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 $ PD[ $ $ $ ES F ' ( H +( / /S 4 Y Z \ = PP R R 1RWHV 3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 287/,1( 9(56,21 627 5()(5(1&(6 ,(& -('(& -(,7$ (8523($1 352-(&7,21 ,668('$7( 02 Fig 24. Package outline SOT403-1 (TSSOP16) 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 21 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer '+94)1SODVWLFGXDOLQOLQHFRPSDWLEOHWKHUPDOHQKDQFHGYHU\WKLQTXDGIODWSDFNDJHQROHDGV 627 WHUPLQDOVERG\[[PP % ' $ $ $ ( F GHWDLO; WHUPLQDO LQGH[DUHD WHUPLQDO LQGH[DUHD & H H E \ \ & Y 0 & $ % Z 0 & / (K H 'K ; PP VFDOH ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 81,7 PP $ PD[ $ E F ' 'K ( (K H / Y Z \ \ H 1RWH 3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 5()(5(1&(6 287/,1( 9(56,21 ,(& -('(& -(,7$ 627 02 (8523($1 352-(&7,21 ,668('$7( Fig 25. Package outline SOT763-1 (DHVQFN16) 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 22 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 12. Abbreviations Table 12. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 13. Revision history Table 13. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LV4051 v.6 20160317 Product data sheet - 74LV4051 v.5 Modifications: 74LV4051 v.5 Modifications: 74LV4051 v.4 Modifications: * Type number 74LV4051N (SOT38-4) removed. 20140917 * Product data sheet - 74LV4051 v.4 Figure 7: Figure note added for DHVQFN16 package 20090810 Product data sheet - 74LV4051 v.3 * The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. * * Legal texts have been adapted to the new company name where appropriate. Added type number 74LV4051BQ (DHVQFN16 package) 74LV4051 v.3 19960623 Product specification - 74LV4051 v.2 74LV4051 v.2 19970715 Product specification - 74LV4051 v.1 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 23 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 14. Legal information 14.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 14.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 14.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. 74LV4051 Product data sheet Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 24 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. Translations -- A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 14.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 15. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com 74LV4051 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 6 -- 17 March 2016 (c) NXP Semiconductors N.V. 2016. All rights reserved. 25 of 26 74LV4051 NXP Semiconductors 8-channel analog multiplexer/demultiplexer 16. Contents 1 2 3 4 5 5.1 5.2 6 6.1 7 8 9 9.1 9.2 9.3 10 10.1 10.2 10.2.1 11 12 13 14 14.1 14.2 14.3 14.4 15 16 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 4 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . 5 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions. . . . . . . . 6 Static characteristics. . . . . . . . . . . . . . . . . . . . . 7 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ON resistance . . . . . . . . . . . . . . . . . . . . . . . . . . 8 On resistance waveform and test circuit. . . . . 10 Dynamic characteristics . . . . . . . . . . . . . . . . . 11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Additional dynamic parameters . . . . . . . . . . . 15 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 19 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 23 Legal information. . . . . . . . . . . . . . . . . . . . . . . 24 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 24 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Contact information. . . . . . . . . . . . . . . . . . . . . 25 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP Semiconductors N.V. 2016. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 17 March 2016 Document identifier: 74LV4051 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NXP: 74LV4051D/AUJ 74LV4051PW/AUJ