


SLRS022ADECEMBER 1976 − REVISED OCTOBER 1995
Copyright 1995, Texas Instruments Incorporated
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
PERIPHERAL DRIVERS FOR
HIGH-VOLTAGE, HIGH-CURRENT DRIVER
APPLICATIONS
Characterized for Use to 300 mA
High-Voltage Outputs
No Output Latch-Up at 30 V (After
Conducting 300 mA)
Medium-Speed Switching
Circuit Flexibility for Varied Applications
and Choice of Logic Function
TTL-Compatible Diode-Clamped Inputs
Standard Supply Voltages
Plastic DIP (P) With Copper Lead Frame for
Cooler Operation and Improved Reliability
Package Options Include Plastic Small
Outline Packages, Ceramic Chip Carriers,
and Standard Plastic and Ceramic 300-mil
DIPs
SUMMARY OF SERIES 55461/75461
DEVICE LOGIC PACKAGES
SN55461 AND FK, JG
SN55462 NAND FK, JG
SN55463 OR FK, JG
SN75461 AND D, P
SN75462 NAND D, P
SN75463 OR D, P
description
These dual peripheral drivers are functionally interchangeable with SN55451B through SN55453B and
SN75451B through SN75453B peripheral drivers, but are designed for use in systems that require higher
breakdown voltages than those devices can provide at the expense of slightly slower switching speeds. Typical
applications include logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, and
memory drivers.
The SN55461/SN75461, SN55462/SN75462, and SN55463/SN75463 are dual peripheral AND, NAND, and
OR drivers respectively (assuming positive logic), with the output of the gates internally connected to the bases
of the npn output transistors.
Series SN55461 drivers are characterized for operation over the full military temperature range of − 55°C
to 125°C. Series SN75461 drivers are characterized for operation from 0°C to 70°C.
1
2
3
4
8
7
6
5
1A
1B
1Y
GND
VCC
2B
2A
2Y
SN55461, SN55462, SN55463 . . . JG PACKAGE
SN75461, SN75462, SN75463 ...D OR P PACKAGE
(TOP VIEW)
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
NC
2B
NC
2A
NC
NC
1B
NC
1Y
NC
SN55461, SN55462, SN55463 . . . FK PACKAGE
(TOP VIEW)
NC
1A
NC
NC NC
NC
GND
NC
NC − No internal connection
CC
V
2Y
   ! "#$ !  %#&'" ($)
(#"! "  !%$""! %$ *$ $!  $+! !#$!
!(( ,-) (#" %"$!!. ($!  $"$!!'- "'#($
$!.  '' %$$!)



SLRS022ADECEMBER 1976 − REVISED OCTOBER 1995
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
SN55’ SN75’ UNIT
Supply voltage, VCC (see Note 1) 7 7 V
Input voltage, VI5.5 5.5 V
Intermitter voltage (see Note 2) 5.5 5.5 V
Off-state output voltage, VO35 35 V
Continuous collector or output current (see Note 3) 400 400 mA
Peak collector or output current (tw 10 ms, duty cycle 50%, see Note 4)
500
500
mA
Peak collector or output current (t
w
10 ms, duty cycle 50%, see Note 4) 500 500 mA
Continuous total power dissipation See Dissipation Rating Table
Operating free-air temperature range, TA55 to 125 0 to 70 °C
Storage temperature range, Tstg 65 to 150 65 to 150 °C
Case temperature for 60 seconds, TCFK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG package 300 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package 260 °C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network GND unless otherwise specified.
2. This is the voltage between two emitters A and B.
3. This value applies when the base-emitter resistance (RBE) is equal to or less than 500 .
4. Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time
interval must fall within the continuous dissipation rating.
DISSIPATION RATING TABLE
PACKAGE
TA
25
°
C
DERATING FACTOR
TA = 70
°
C
TA = 125
°
C
PACKAGE
TA 25 C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70 C
POWER RATING
TA = 125 C
POWER RATING
D725 mW 5.8 mW/°C464 mW
FK 1375 mW 11.0 mW/°C 880 mW 275 mW
JG 1050 mW 8.4 mW/°C 672 mW 210 mW
P1000 mW 8.0 mW/°C640 mW
recommended operating conditions
SN55’ SN75’
UNIT
MIN NOM MAX MIN NOM MAX
UNIT
Supply voltage, VCC 4.5 5 5.5 4.75 5 5.25 V
High-level input voltage, VIH 2 2 V
Low-level input voltage, VIL 0.8 0.8 V
Operating free-air temperature, TA−55 125 0 70 °C
VCC
A
GND
Y
500
1 k
B
4 k1.6 k130
schematic (each driver)
Resistor values shown are nominal.



SLRS022ADECEMBER 1976 − REVISED OCTOBER 1995
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
logic symbollogic diagram (positive logic)
2B
2A
1B
1A
4
5
3
2Y
1Y
7
6
2
1
&
5
3
2B
2A
1B
1A
2Y
1Y
7
6
2
1
This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
P
in numbers shown are for D, JG, and P packages. GND
FUNCTION TABLE
(each driver)
ABY
L L L (on state)
LH L (on state)
HL L (on state)
H H H (off state)
positive logic:
Y = AB or A + B
electrical characteristics over recommended operating free-air temperature range
TEST CONDITIONS
SN55461 SN75461
UNIT
TEST CONDITIONS
MIN TYPMAX MIN TYPMAX
UNIT
VIK Input clamp voltage VCC = MIN, II = −12 mA 1.2 1.5 1.2 1.5 V
IOH
High-level output current
VCC = MIN,
VIH = MIN,
300
100
A
IOH High-level output current
VCC = MIN,
VOH = 35 V
VIH = MIN,
300 100 µA
VCC = MIN, VIL = 0.8 V,
0.25
0.5
0.25
0.4
VOL
Low-level output voltage
VCC = MIN, VIL = 0.8 V,
IOL = 100 mA 0.25 0.5 0.25 0.4
V
VOL Low-level output voltage
VCC = MIN, VIL = 0.8 V,
0.5
0.8
0.5
0.7
V
VCC = MIN, VIL = 0.8 V,
IOL = 300 mA 0.5 0.8 0.5 0.7
IIInput current at maximum input voltage VCC = MAX, VI = 5.5 V 1 1 mA
IIH High-level input current VCC = MAX, VI = 2.4 V 40 40 µA
IIL Low-level input current VCC = MAX, VI = 0.4 V −1 1.6 −1 1.6 mA
ICCH Supply current, outputs high VCC = MAX, VI = 5 V 811 811 mA
ICCL Supply current, outputs low VCC = MAX, VI = 0 56 76 56 76 mA
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25°C.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
tPLH Propagation delay time, low-to-high-level output 30 55
tPHL Propagation delay time, high-to-low-level output
IO
200 mA,
CL = 15 pF,
25 40
ns
tTLH Transition time, low-to-high-level output
IO 200 mA,
RL = 50 ,
CL = 15 pF,
See Figure 1 8 20 ns
tTHL Transition time, high-to-low-level output
RL = 50 ,
See Figure 1
10 20
VOH
High-level output voltage after switching
SN55461
VS = 30 V,
IO
300 mA,
VS−10
mV
V
OH
High-level output voltage after switching
SN75461
VS = 30 V,
See Figure 2
IO 300 mA,
VS−10
mV
VCC
A
GND
Y
500
1 k
B
4 k1.6 k130
schematic (each driver)
Resistor values shown are nominal.
1 k
1.6 k



SLRS022ADECEMBER 1976 − REVISED OCTOBER 1995
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
logic symbollogic diagram (positive logic)
2B
2A
1B
1A
4
5
3
GND
2Y
1Y
7
6
2
1
&
5
3
2B
2A
1B
1A
2Y
1Y
7
6
2
1
This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
P
in numbers shown are for D, JG, and P packages.
FUNCTION TABLE
(each driver)
ABY
L L H (off state)
LH H (off state)
HL H (off state)
H H L (on state)
positive logic:
Y = AB or A + B
electrical characteristics over recommended operating free-air temperature range
PARAMETER
TEST CONDITIONS
SN55462 SN75462
UNIT
PARAMETER
TEST CONDITIONS
MIN TYPMAX MIN TYPMAX
UNIT
VIK Input clamp voltage VCC = MIN, II = −12 mA 1.2 1.5 1.2 1.5 V
IOH
High-level output current
VCC = MIN,
VIL = 0.8 V,
300
100
A
IOH High-level output current
VCC = MIN,
V
OH
= 35 V
VIL = 0.8 V,
300 100 µA
VCC = MIN, VIH = MIN,
0.25
0.5
0.25
0.4
VOL
Low-level output voltage
VCC = MIN, VIH = MIN,
I
OL
= 100 mA 0.25 0.5 0.25 0.4
V
VOL Low-level output voltage
VCC = MIN, VIH = MIN,
0.5
0.8
0.5
0.7
V
VCC = MIN, VIH = MIN,
I
OL
= 300 mA 0.5 0.8 0.5 0.7
IIInput current at maximum input voltage VCC = MAX, VI = 5.5 V 1 1 mA
IIH High-level input current VCC = MAX, VI = 2.4 V 40 40 µA
IIL Low-level input current VCC = MAX, VI = 0.4 V 1.1 1.6 1.1 1.6 mA
ICCH Supply current, outputs high VCC = MAX, VI = 0 13 17 13 17 mA
ICCL Supply current, outputs low VCC = MAX, VI = 5 V 61 76 61 76 mA
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25°C.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
tPLH Propagation delay time, low-to-high-level output 45 65
tPHL Propagation delay time, high-to-low-level output
IO
200 mA,
CL = 15 pF,
30 50
ns
tTLH Transition time, low-to-high-level output
IO 200 mA,
RL = 50 ,
CL = 15 pF,
See Figure 1 13 25 ns
tTHL Transition time, high-to-low-level output
RL = 50 ,
See Figure 1
10 20
VOH
High-level output voltage after switching
SN55462
VS = 30 V,
IO
300 mA,
VS−10
mV
V
OH
High-level output voltage after switching
SN75462
VS = 30 V,
See Figure 2
IO 300 mA,
VS−10
mV
schematic (each driver)
Resistor values shown are nominal.
VCC
A
GN
D
Y
500
1 k
B
4 k1.6 k130 4 k



SLRS022ADECEMBER 1976 − REVISED OCTOBER 1995
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
logic symbollogic diagram (positive logic)
2B
2A
1B
1A
4
5
3
GND
2Y
1Y
7
6
2
1
1
5
3
2B
2A
1B
1A
2Y
1Y
7
6
2
1
This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
P
in numbers shown are for D, JG, and P packages.
FUNCTION TABLE
(each driver)
ABY
L L L (on state)
LH H (off state)
HL H (off state)
H H H (off state)
positive logic:
Y = A + B or A B
electrical characteristics over recommended operating free-air temperature range
PARAMETER
TEST CONDITIONS
SN55463 SN75463
UNIT
PARAMETER
TEST CONDITIONS
MIN TYPMAX MIN TYPMAX
UNIT
VIK Input clamp voltage VCC = MIN, II = −12 mA 1.2 1.5 1.2 1.5 V
IOH
High-level output current
VCC = MIN,
VIH = MIN,
300
100
A
IOH High-level output current
VCC = MIN,
V
OH
= 35 V
VIH = MIN,
300 100 µA
VCC = MIN, VIL = 0.8 V,
0.25
0.5
0.25
0.4
VOL
Low-level output voltage
VCC = MIN, VIL = 0.8 V,
I
OL
= 100 mA 0.25 0.5 0.25 0.4
V
VOL Low-level output voltage
VCC = MIN, VIL = 0.8 V,
0.5
0.8
0.5
0.7
V
VCC = MIN, VIL = 0.8 V,
I
OL
= 300 mA 0.5 0.8 0.5 0.7
IIInput current at maximum input voltage VCC = MAX, VI = 5.5 V 1 1 mA
IIH High-level input current VCC = MAX, VI = 2.4 V 40 40 µA
IIL Low-level input current VCC = MAX, VI = 0.4 V −1 1.6 −1 1.6 mA
ICCH Supply current, outputs high VCC = MAX, VI = 5 V 811 811 mA
ICCL Supply current, outputs low VCC = MAX, VI = 0 58 76 58 76 mA
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25°C.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
tPLH Propagation delay time, low-to-high-level output 30 55
tPHL Propagation delay time, high-to-low-level output
IO
200 mA,
CL = 15 pF,
25 40
ns
tTLH Transition time, low-to-high-level output
IO 200 mA,
RL = 50 ,
CL = 15 pF,
See Figure 1 8 25 ns
tTHL Transition time, high-to-low-level output
RL = 50 ,
See Figure 1
10 25
VOH
High-level output voltage after switching
SN55463
VS = 30 V,
IO
300 mA,
VS−10
mV
V
OH
High-level output voltage after switching
SN75463
VS = 30 V,
See Figure 2
IO 300 mA,
VS−10
mV



SLRS022ADECEMBER 1976 − REVISED OCTOBER 1995
6POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
PARAMETER MEASUREMENT INFORMATION
Generator
Pulse
GND
(see Note A)
2.4 VInput
SUB
10% 10%
90%90%
1.5 V1.5 V
5 ns
90% 90%
10%10%
1.5 V1.5 V
0.5 µs
10% 10%
90%90% 50% 50%
tPLH
tTHL
3 V
0 V
3 V
0 V
VOH
VOL
Output
Input
TEST CIRCUIT VOLTAGE WAVEFORMS
’461
’462
’463
0.4 V
CL = 15 pF
(see Note B)
Output
10 V
RL = 50
10 ns
5 ns 10 ns
tTLH
’461
’463
Input
’462
Circuit
Under
Test
(see Note B) tPHL
NOTES: A. The pulse generator has the following characteristics: PRR 1 MHz, ZO 50 .
B. CL includes probe and jig capacitance.
Figure 1. Test Circuit and Voltage Waveforms for Switching Times
Generator
Pulse
GND
(see Note A)
2.4 VInput
SUB
90%90%
1.5 V1.5 V
5 ns
90% 90%
10%10%
1.5 V1.5 V
40 µs
10% 10%
3 V
0 V
3 V
0 V
VOH
’461
’462
’463
0.4 V
Output
VS = 30 V 10 ns
5 ns 10 ns
65
2 mH
1N3064
5 V
VOL
Circuit
Under
Test
(see Note B)
TEST CIRCUIT VOLTAGE WAVEFORMS
CL = 15 pF
(see Note B)
Output
Input
’461
’463
Input
’462
NOTES: A. The pulse generator has the following characteristics: PRR 12.5 kHz, ZO = 50 .
B. CL includes probe and jig capacitance.
Figure 2. Test Circuit and Voltage Waveforms for Latch-Up Test
PACKAGE OPTION ADDENDUM
www.ti.com 25-Jan-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
JM38510/12908BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
JM38510/12909BPA OBSOLETE CDIP JG 8 TBD Call TI Call TI
M38510/12908BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
SN55461JG OBSOLETE CDIP JG 8 TBD Call TI Call TI
SN55462JG OBSOLETE CDIP JG 8 TBD Call TI Call TI
SN55463JG OBSOLETE CDIP JG 8 TBD Call TI Call TI
SN75461D OBSOLETE SOIC D 8 TBD Call TI Call TI
SN75461P OBSOLETE PDIP P 8 TBD Call TI Call TI
SN75462D ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75462DE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75462DG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75462DR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75462DRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75462DRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75462P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75462PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75463D OBSOLETE SOIC D 8 TBD Call TI Call TI
SN75463DR OBSOLETE SOIC D 8 TBD Call TI Call TI
SN75463P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75463PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SNJ55461FK OBSOLETE LCCC FK 20 TBD Call TI Call TI
SNJ55461JG OBSOLETE CDIP JG 8 TBD Call TI Call TI
SNJ55462FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
SNJ55462JG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
SNJ55463JG OBSOLETE CDIP JG 8 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 25-Jan-2012
Addendum-Page 2
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN55461, SN55462, SN55463, SN75461, SN75462, SN75463 :
Catalog: SN75461, SN75462, SN75463
Military: SN55461, SN55462, SN55463
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Military - QML certified for Military and Defense Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0 (mm) B0 (mm) K0 (mm) P1
(mm) W
(mm) Pin1
Quadrant
SN75462DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 19-Mar-2008
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN75462DR SOIC D 8 2500 340.5 338.1 20.6
PACKAGE MATERIALS INFORMATION
www.ti.com 19-Mar-2008
Pack Materials-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUAR Y 1997
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,16)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated