Loose A70 MKP Series Taped METALLIZED POLYPROPYLENE CAPACITOR MULTIPURPOSE APPLICATIONS Typical applications: temperature compensation circuits, timing, oscillator circuits, power factor correction and coupling capacitor in SMPS applications. PRODUCT CODE: A70 D max 5 >5 7 Od 0.05 0.5 0.6 All dimensions are in mm. >7<16 0.8 16 1 Product code system GENERAL TECHNICAL DAta Dielectric: polypropylene film. The part number, comprising 14 digits, is formed as follows: Plates: aluminium layer deposited by evaporation under 1 2 3 4 5 6 7 8 9 10 11 12 13 14 vacuum. Winding: non-inductive type. A 7 0 Leads: tinned wire. Protection: polyester tape wrapping and thermosetting resin Digit 1 to 3Series code. end fill. Digit 4 d.c. rated voltage: Marking: Manufacturer's logo, series (1.70), dielectric G =160V I = 250V M = 400V P = 630V code (MKP), capacitance, tolerance, D.C. rated Digit 5 Length (mm): voltage. F=11; H=14; K=20.5; Q=28; T=33 Climatic category: 55/105/56 IEC 60068-1 Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Operating temperature range: -55 to +105C Capacitance value and the 6th digit indicates Related documents: IEC 60384-16 the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table1) Digit 12 Identifies the dimensions and electrical characteristics. Winding scheme Digit 13 Internal use Digit 14 Capacitance tolerance: J=5%; K=10%; M=20%. single sided metallized polypropylene film Table 1 (for more detailed information, please refer to page 14). Standard packaging style Ordering code Reel O 355 mm 26 Loose AA 09/2008 (Digit 10 to 11) 64 A70 MKP Series METALLIZED POLYPROPYLENE CAPACITOR MULTIPURPOSE APPLICATIONS PRODUCT CODE: A70 Rated Cap. 160Vdc/90Vac D max L max Max dv/dt (V/s) Max K0 0.022 F 5.0 11.0 5 1.60 E3 5.0 11.0 5 1.60 E3 0.047 F 5.0 11.0 5 1.60 E3 0.068 F 5.5 14.0 5 1.60 E3 0.10 F 5.5 14.0 5 1.60 E3 0.15 F 6.5 14.0 5 1.60 E3 0.22 F 7.5 14.0 5 1.60 E3 0.33 F 7.0 20.5 3 0.96 E3 0.47 F 8.0 20.5 3 0.96 E3 0.68 F 8.0 28.0 2 0.64 E3 1.0 F 9.5 28.0 2 0.64 E3 1.5 F 11.0 28.0 2 0.64 E3 2.2 F 12.0 33.0 1 0.32 E3 3.3 F 14.5 33.0 1 0.32 E3 4.7 F 17.0 33.0 1 0.32 E3 Max dv/dt (V/s) Max K0 250Vdc/200Vac D max L max 0.010 F 5.0 11.0 11.0 5.5 E3 0.015 F 5.0 11.0 11.0 5.5 E3 0.022 F 5.5 14.0 10.0 5.0 E3 0.033 F 5.5 14.0 10.0 5.0 E3 0.047 F 6.0 14.0 10.0 5.0 E3 0.068 F 7.0 14.0 10.0 5.0 E3 0.10 F 8.5 14.0 10.0 5.0 E3 0.15 F 7.5 20.5 7.0 3.5 E3 0.22 F 9.0 20.5 7.0 3.5 E3 0.33 F 8.5 28.0 4.0 2.0 E3 0.47 F 10.0 28.0 4.0 2.0 E3 0.68 F 11.5 28.0 4.0 2.0 E3 1.0 F 12.5 33.0 2.5 1.3 E3 1.5 F 15.0 33.0 2.5 1.3 E3 2.2 F 18.0 33.0 2.5 1.3 E3 3.3 F 21.5 33.0 2.5 1.3 E3 All dimensions are in mm. A70GF 2220--0-- L max Max dv/dt (V/s) Max K0 (V2/s) 6800 pF 5.0 11.0 25.0 20.0 E3 A70GF 2330--0-- 0.010 F 5.5 14.0 13.5 11.0 E3 A70GF 2470--0-- 0.015 F 6.0 14.0 13.5 11.0 E3 A70GH 2680--0-- 0.022 F 6.0 14.0 13.5 11.0 E3 A70GH 3100--0-- 0.033 F 6.5 14.0 13.5 11.0 E3 A70GH 3150--0-- 0.047 F 8.0 14.0 13.5 11.0 E3 A70GH 3220--0-- 0.068 F 7.0 20.5 10.0 8.0 E3 A70GK 3330--0-- 0.10 F 8.0 20.5 10.0 8.0 E3 A70GK 3470--0-- 0.15 F 8.0 28.0 6.5 5.2 E3 A70GQ3680--0-- 0.22 F 9.5 28.0 6.5 5.2 E3 A70GQ4100--0-- 0.33 F 11.0 28.0 6.5 5.2 E3 A70GQ4150--0-- 0.47 F 13.0 28.0 6.5 5.2 E3 A70GT 4220--0-- 0.68 F 13.5 33.0 4.0 3.2 E3 A70GT 4330--0-- 1.0 F 16.5 33.0 4.0 3.2 E3 A70GT 4470--0-- 1.5 F 20.0 33.0 4.0 3.2 E3 Rated Cap. D max L max Max dv/dt (V/s) A70IF 2100--0-- 1000 pF 5.0 11.0 30 38.0 E3 A70IF 2150--0-- 1500 pF 5.0 11.0 30 38.0 E3 A70IH 2220--0-- 2200 pF 5.0 11.0 30 38.0 E3 A70IH 2330--0-- 3300 pF 5.0 11.0 30 38.0 E3 A70IH 2470--0-- 4700 pF 5.0 11.0 30 38.0 E3 A70IH 2680--0-- 6800 pF 5.5 14.0 20 25.0 E3 A70IH 3100--0-- 0.010 F 6.0 14.0 20 25.0 E3 A70IK 3150--0-- 0.015 F 7.0 14.0 20 25.0 E3 A70IK 3220--0-- 0.022 F 8.5 14.0 20 25.0 E3 A70IQ 3330--0-- 0.033 F 7.5 20.5 15 19.0 E3 A70IQ 3470--0-- 0.047 F 8.5 20.5 15 19.0 E3 A70IQ 3680--0-- 0.068 F 8.5 28.0 10 13.0 E3 A70IT 4100--0-- 0.10 F 10.0 28.0 10 13.0 E3 A70IT 4150--0-- 0.15 F 11.5 28.0 10 13.0 E3 A70IT 4220--0-- 0.22 F 12.5 33.0 6 7.6 E3 A70IT 4330--0-- 0.33 F 15.0 33.0 6 7.6 E3 0.47 F 17.5 33.0 6 7.6 E3 0.68 F 21.0 33.0 6 7.6 E3 Part Number (V2/s) Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) 400Vdc/220Vac* D max (V2/s) 0.033 F Rated Cap. Rated Cap. Part Number 630Vdc/250Vac* Part Number A70F 1680--0-A70MH 2100--0-A70MH 2150--0-A70MH 2220--0-A70MH 2330--0-A70MH 2470--0-A70MK 2680--0-A70MK 3100--0-- A70MQ3150--0-A70MQ3220--0-A70MQ3330--0-A70MQ3470--0-A70MT 3680--0-A70MT 4100--0-A70MT 4150--0-- Max K0 Part Number (V2/s) A70PF 1100--0-A70PF 1150--0-- A70PF 1220--0-A70PF 1330--0-A70PF 1470--0-A70PH 1680--0-A70PH 2100--0-A70PH 2150--0-A70PH 2220--0-A70PK 2330--0-A70PK 2470--0-A70PQ 2680--0-A70PQ 3100--0-A70PQ 3150--0-A70PT 3220--0-A70PT 3330--0-A70PT 3470--0-A70PT 3680--0-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) Note 1: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. Note 2:Special version for line applications (rated voltage 250 Vac) available upon request. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 65 09/2008 A70 MKP Series METALLIZED POLYPROPYLENE CAPACITOR MULTIPURPOSE APPLICATIONS PRODUCT CODE: A70 test method and performance electrical characteristics Damp heat, steady state: Rated voltage (VR): 160 Vdc - 250Vdc 400 Vdc - 630 Vdc Test conditions Rated temperature (TR): +85C Temperature: Temperature derated voltage: Relative humidity (RH): for temperatures between +85C and +105C a decreasing Test duration: factor of 1.25% per degree C on the rated voltage VR Performance Capacitance change |C/C|: (d.c. and a.c.) has to be applied. DF change (tg): Capacitance range: 1000pF to 4.7F Insulation resistance: Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): max 1 nH per 1 mm lead and capacitor length. Dissipation factor (DF): tgx10-4 at +25C 5C kHz 1 10 100 C<0.1 F 06 10 30 0.1 F to 1 F 06 20 2% 10x10-4 at 1kHz 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: Performance +85C2C 2000 h 1.25xVR Capacitance change |C/C|: 3% DF change (tg): 10x10-4 at 10kHz for C1F 10x10-4 att01kHz for C>1F Insulation resistance: 50% of initial limit. >1 F 06 Resistance to soldering heat: Test conditions Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1x105 M 30000 s +40C2C 93% 2% 56 days for C 0.33 F for C > 0.33 F Solder bath temperature: +260C5C Dipping time (with heat screen):10 s 1 s +25C 5C 1 min 100Vdc Performance Capacitance change |C/C|: 1% DF change (tg): 10x10-4 at 10kHz for C1F 10x10-4 att01kHz for C>1F Insulation resistance: initial limit. (5x105 M)* (150000 s)* *Typical value Test voltage between terminations: Long term stability (after two years): Storage: standard environmental conditions (see page 12). 1.6xVR applied for 2 s at +25C 5C. Performance Capacitance change |C/C|: 0.5% 09/2008 66 A70 MKP Series METALLIZED POLYPROPYLENE CAPACITOR MULTIPURPOSE APPLICATIONS PRODUCT CODE: A70 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 67 09/2008 A70 MKP Series METALLIZED POLYPROPYLENE CAPACITOR MULTIPURPOSE APPLICATIONS PRODUCT CODE: A70 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 09/2008 68