1
American Opto Plus LED Corp.
CTD591PG-W/W
15.0 x 15.0 x 11.0 mm Touch LED Pure Green Display
Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice.
American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com
PACKAGE DIMENSION
Notes:
1. All pins are Φ0.60[0.24], dimensions in millimeter.
2. Tolerances are 0.25[.01] unless otherwise noted.
Part No. Chip Material Chip Emitted Face/Segment
CTD591PG-W/W InGaN Pure Green White/
White
2
American Opto Plus LED Corp.
CTD591PG-W/W
15.0 x 15.0 x 11.0 mm Touch LED Pure Green Display
Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice.
American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com
PIN POSITION & INTERNAL CIRCUIT DIAGRAM
3
American Opto Plus LED Corp.
CTD591PG-W/W
15.0 x 15.0 x 11.0 mm Touch LED Pure Green Display
Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice.
American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com
ABSOLUTE MAXIMUM RATINGS (Ta=25C)
Parameter Symbol Value Unit
Power Dissipation Per Dice PD 114 mW
Derating Liner from 25°C Per Dice -- 0.4 mA/°C
Continuous Forward Current Per Dice IF 30 mA
Peak Current Per Dice (duty cycle 1/10, 1KHz) IFP 100 mA
Reverse Voltage Per Dice VR 5 V
Operating Temperature Range TOPR -35~+85 °C
Storage Temperature Range TSTG -35~+85 °C
OPTICAL-ELECTRICAL CHARACTERISTICS (Ta=25C)
Parameter Symbol Test Condition Value Unit
Min Typ Max
Forward Voltage VF
IF=20mA
-- 3.2 3.8 V
Luminous Intensity IV 180.6 380 -- mcd
Dominant Wavelength λD -- 525 -- nm
Spectrum Radiation Bandwidth Δλ -- 30 -- nm
Luminous Intensity Matching Ratio IV-m IF=10mA -- -- 2:1 --
Reverse Current IR VR=5V -- -- 50 μA
Forward voltage tolerance: 0.1V
Luminous intensity tolerance: 20%
4
American Opto Plus LED Corp.
CTD591PG-W/W
15.0 x 15.0 x 11.0 mm Touch LED Pure Green Display
Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice.
American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com
LUMINOUS INTENSITY BIN GRADE (IF=20mA)
COLOR BIN GRADE (IF=20mA)
5
American Opto Plus LED Corp.
CTD591PG-W/W
15.0 x 15.0 x 11.0 mm Touch LED Pure Green Display
Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice.
American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com
OPTICAL CHARACTERISTIC CURVES
6
American Opto Plus LED Corp.
CTD591PG-W/W
15.0 x 15.0 x 11.0 mm Touch LED Pure Green Display
Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice.
American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com
RECOMMENDED SOLDERING CONDITIONS
1. Wave Soldering Profile
Distance: 1.6mm min (from seating plane)
2. Hand Soldering (Iron Condition)
Soldering Iron: 30W Max
Temperature: 350°C Max
Soldering Time: 3 seconds Max (one time)
Distance: 1.6mm min (from seating plane)
