ADR02AUJ-REEL7 - Analog Devices

Ultracompact Precision

10 V/5 V/2.5 V/3.0 V Voltage References

ADR01/ADR02/ADR03/ADR06

FEATURES

Ultracompact SC70-5/TSOT-5

Low temperature coefficient

SOIC-8: 3 ppm/°C

SC70-5/TSOT-5: 9 ppm/°C

Initial accuracy ± 0.1%

No external capacitor required

Low noise 10 µV p-p (0.1 Hz to 10 Hz)

Wide operating range

ADR01: 12 V to 40 V

ADR02: 7 V to 40 V

ADR03: 4.5 V to 40 V

ADR06: 5.0 V to 40 V

High output current 10 mA

Wide temperature range: –40°C to +125°C

ADR01/ADR02/ADR03 pin compatible to industry-standard

REF01/REF02/REF031

APPLICATIONS

Precision data acquisition systems

High resolution converters

Industrial process control systems

Precision instruments

PCMCIA cards

SELECTION GUIDE

Part Number Output Voltage

ADR01 10.0 V

ADR02 5.0 V

ADR03 2.5 V

ADR06 3.0 V

1 ADR01, ADR02, and ADR03 are component-level compatible with REF01,

REF02, and REF03, respectively. No guarantees for system-level compatibility

are implied. SOIC-8 versions of ADR01/ADR02/ADR03 are pin-to-pin

compatible with SOIC-8 versions of REF01/REF02/REF03, respectively, with

the additional temperature monitoring function.

PIN CONFIGURATIONS

VOUT

TRIM

VIN

TEMP

GND

TOP VIEW

(Not to Scale)

ADR01/

ADR02/

ADR03/

ADR06

02747-F-001

Figure 1. 5-Lead SC70/TSOT Surface-Mount Packages

TOP VIEW

(Not to Scale)

ADR01/

ADR02/

ADR03/

ADR06

OUT

TRIM

NIC

TEMP

GND

NIC = NO INTERNAL CONNECT

TP = TEST PIN (DO NOT CONNECT)

02747-F-002

Figure 2. 8-Lead SOIC Surface-Mount Package

GENERAL DESCRIPTION

The ADR01, ADR02, ADR03, and ADR06 are precision 10 V,

5 V, 2.5 V, and 3.0 V band gap voltage references featuring high

accuracy, high stability, and low power. The parts are housed in

tiny SC70-5 and TSOT-5 packages, as well as the SOIC-8

versions. The SOIC-8 versions of the ADR01, ADR02, and

ADR03 are drop-in replacements1 to the industry-standard

REF01, REF02, and REF03. The small footprint and wide

operating range make the ADR0x references ideally suited for

general-purpose and space-constraint applications.

With an external buffer and a simple resistor network, the

TEMP terminal can be used for temperature sensing and

approximation. A TRIM terminal is provided on the devices

for fine adjustment of the output voltage.

The ADR01, ADR02, ADR03, and ADR06 are compact, low drift

voltage references that provide an extremely stable output

voltage from a wide supply voltage range. They are available in

SC70-5, TSOT-5, and SOIC-8 packages with A and B grade

selections. All parts are specified over the extended industrial

(–40°C to +125°C) temperature range.

Rev. F

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700 www.analog.com

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 2 of 20

TABLE OF CONTENTS

Specifications..................................................................................... 3

ADR01 Electrical Characteristics............................................... 3

ADR02 Electrical Characteristics............................................... 4

ADR03 Electrical Characteristics............................................... 5

ADR06 Electrical Characteristics............................................... 6

Dice Electrical Characteristics.................................................... 7

Absolute Maximum Ratings............................................................ 8

Parameter Definitions...................................................................... 9

Notes............................................................................................... 9

Typical Performance Characteristics ........................................... 10

Applications..................................................................................... 15

Applying the ADR01/ADR02/ADR03/ADR06...................... 15

Negative Reference ..................................................................... 16

Low Cost Current Source.......................................................... 16

Precision Current Source with Adjustable Output ................ 16

Programmable 4 to 20 mA Current Transmitter ................... 17

Outline Dimensions....................................................................... 18

Ordering Guides............................................................................. 19

ADR01 Ordering Guide ............................................................ 19

ADR02 Ordering Guide ............................................................ 19

ADR03 Ordering Guide ............................................................ 20

ADR06 Ordering Guide ............................................................ 20

REVISION HISTORY

7/04—Data Sheet Changed from Rev. E to Rev. F

Changes to ADR02 Electrical Characteristics, Table 2................ 4

Changes to Ordering Guide .......................................................... 19

2/04—Data Sheet Changed from Rev. D to Rev. E

Added C grade ................................................................Universal

Changes to Outline Dimensions............................................... 19

Updated Ordering Guide........................................................... 20

8/03—Data Sheet Changed from Rev. C to Rev D

Added ADR06 Universal

Change to Figure 27 13

6/03—Data Sheet Changed from Rev. B to Rev C

Changes to Features Section 1

Changes to General Description Section 1

Changes to Figure 2 1

Changes to Specifications Section 2

Addition of Dice Electrical Characteristics and Layout 6

Changes to Absolute Maximum Ratings Section 7

Updated SOIC (R-8) Outline Dimensions 19

Changes to Ordering Guide 20

2/03—Data Sheet Changed from Rev. A to Rev. B

Added ADR03.....................................................................Universal

Added TSOT-5 (UJ) Package............................................Universal

Updated Outline Dimensions....................................................... 18

12/02—Data Sheet Changed from Rev. 0 to Rev. A

Changes to Features Section ........................................................1

Changes to General Description .................................................1

Table I deleted................................................................................1

Changes to ADR01 Specifications ..............................................2

Changes to ADR02 Specifications ..............................................3

Changes to Absolute Maximum Ratings Section .....................4

Changes to Ordering Guide.........................................................4

Updated Outline Dimensions .................................................. 12

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 3 of 20

SPECIFICATIONS

ADR01 ELECTRICAL CHARACTERISTICS

VIN = 12 V to 40 V, TA = 25°C, unless otherwise noted.

Table 1.

Parameter Symbol Conditions Min Typ Max Unit

Output Voltage VOA and C grades 9.990 10.000 10.010 V

10 mV Initial Accuracy VOERR A and C grades

0.1 %

Output Voltage VOB grade 9.995 10.000 10.005 V

5 mV Initial Accuracy VOERR B grade

0.05 %

A grade, SOIC-8, –40°C < TA < +125°C 3 10 ppm/°C

A grade, TSOT-5, –40°C < TA < +125°C 25 ppm/°C

A grade, SC70-5, –40°C < TA < +125°C 25 ppm/°C

B grade, SOIC-8, –40°C < TA < +125°C 1 3 ppm/°C

B grade, TSOT-5, –40°C < TA < +125°C 9 ppm/°C

Temperature Coefficient TCVO

B grade, SC70-5, –40°C < TA < +125°C 9 ppm/°C

C grade, SOIC-8, –40°C < TA < +125°C 10 40 ppm/°C

Supply Voltage Headroom VIN – VO 2 V

Line Regulation ∆VO/∆VIN VIN = 12 V to 40 V, –40°C < TA < +125°C 7 30 ppm/V

Load Regulation ∆VO/∆ILOAD ILOAD = 0 to 10 mA, –40°C < TA < +125°C, VIN = 15 V 40 70 ppm/mA

Quiescent Current IIN No load, –40°C < TA < +125°C 0.65 1 mA

Voltage Noise eN p-p 0.1 Hz to 10 Hz 20 µV p-p

Voltage Noise Density eN1 kHz 510 nV/√Hz

Turn-On Settling Time tR 4 µs

Long-Term Stability1∆VO1,000 hours 50 ppm

Output Voltage Hysteresis ∆VO_HYS 70 ppm

Ripple Rejection Ratio RRR fIN = 10 kHz −75 dB

Short Circuit to GND ISC 30 mA

Voltage Output at TEMP Pin VTEMP 550 mV

Temperature Sensitivity TCVTEMP 1.96 mV/°C

1 The long-term stability specification is noncumulative. The drift in subsequent 1,000 hour periods is significantly lower than in the first 1,000 hour period.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 4 of 20

ADR02 ELECTRICAL CHARACTERISTICS

VIN = 7 V to 40 V, TA = 25°C, unless otherwise noted.

Table 2.

Parameter Symbol Conditions Min Typ Max Unit

Output Voltage VOA and C grades 4.995 5.000 5.005 V

5 mV Initial Accuracy VOERR A and C grades

0.1 %

Output Voltage VOB grade 4.997 5.000 5.003 V

3 mV Initial Accuracy VOERR B grade

0.06 %

A grade, SOIC-8, –40°C < TA < +125°C 3 10 ppm/°C

A grade, TSOT-5, –40°C < TA < +125°C 25 ppm/°C

A grade, SC70-5, –40°C < TA < +125°C

A grade. SC70-5, -55oC < TA < +125oC

ppm/°C

B grade, SOIC-8, –40°C < TA < +125°C 1 3 ppm/°C

B grade, TSOT-5, –40°C < TA < +125°C 9 ppm/°C

Temperature Coefficient TCVO

B grade, SC70-5, –40°C < TA < +125°C 9 ppm/°C

C grade, SOIC-8, –40°C < TA < +125°C 10 40 ppm/°C

Supply Voltage Headroom VIN – VO 2 V

Line Regulation ∆VO/∆VIN VIN = 7 V to 40 V, –40°C < TA < +125°C

VIN = 7 V to 40 V, –55°C < TA < +125°C

ppm/V

Load Regulation ∆VO/∆ILOAD ILOAD = 0 to 10 mA, –40°C < TA < +125°C,

VIN = 10 V

ILOAD = 0 to 10 mA, –55°C < TA < +125°C,

VIN = 10 V

ppm/mA

Quiescent Current IIN No load, –40°C < TA < +125°C 0.65 1 mA

Voltage Noise eN p-p 0.1 Hz to 10 Hz 10 µV p-p

Voltage Noise Density eN1 kHz 230 nV/√Hz

Turn-On Settling Time tR 4 µs

Long-Term Stability1∆VO1,000 hours 50 ppm

Output Voltage Hysteresis ∆VO_HYS

–55°C < TA < +125°C

ppm

Ripple Rejection Ratio RRR fIN = 10 kHz –75 dB

Short Circuit to GND ISC 30 mA

Voltage Output at TEMP Pin VTEMP 550 mV

Temperature Sensitivity TCVTEMP 1.96 mV/°C

1 The long-term stability specification is noncumulative. The drift in subsequent 1,000 hour periods is significantly lower than in the first 1,000 hour period.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 5 of 20

ADR03 ELECTRICAL CHARACTERISTICS

VIN = 4.5 V to 40 V, TA = 25°C, unless otherwise noted.

Table 3.

Parameter Symbol Conditions Min Typ Max Unit

Output Voltage VOA and C grades 2.495 2.500 2.505 V

5 mV Initial Accuracy VOERR A and C grades

0.2 %

Output Voltage VOB grades 2.4975 2.5000 2.5025 V

2.5 mV Initial Accuracy VOERR B grades

0.1 %

A grade, SOIC-8, –40°C < TA < +125°C 3 10 ppm/°C

A grade, TSOT-5, –40°C < TA < +125°C 25 ppm/°C

A grade, SC70-5, –40°C < TA < +125°C

A grade, SC70-5, –55°C < TA < +125°C

ppm/°C

B grade, SOIC-8, –40°C < TA < +125°C 1 3 ppm/°C

B grade, TSOT-5, –40°C < TA < +125°C 9 ppm/°C

Temperature Coefficient TCVO

B grade, SC70-5, –40°C < TA < +125°C 9 ppm/°C

C grade, SOIC-8, –40°C < TA < +125°C 10 40 ppm/°C

Supply Voltage Headroom VIN – VO 2 V

Line Regulation ∆VO/∆VIN VIN = 7.5 V to 40 V, –40°C < TA < +125°C

VIN = 7.5 V to 40 V, –55°C < TA < +125°C

ppm/V

Load Regulation ∆VO/∆ILOAD ILOAD = 0 mA to 10 mA, –40°C < TA < +125°C,

VIN = 7.0 V

ILOAD = 0 mA to 10 mA, –55°C < TA < +125°C,

VIN = 7.0 V

ppm/mA

Quiescent Current IIN No load, –40°C < TA < +125°C 0.65 1 mA

Voltage Noise eN p-p 0.1 Hz to 10 Hz 6 µV p-p

Voltage Noise Density eN1 kHz 230 nV/√Hz

Turn-On Settling Time tR 4 µs

Long-Term Stability1∆VO1,000 hours 50 ppm

Output Voltage Hysteresis ∆VO_HYS

–55°C < TA < +125°C

ppm

Ripple Rejection Ratio RRR fIN = 10 kHz –75 dB

Short Circuit to GND ISC 30 mA

Voltage Output at TEMP Pin VTEMP 550 mV

Temperature Sensitivity TCVTEMP 1.96 mV/°C

1 The long-term stability specification is noncumulative. The drift in subsequent 1,000 hour periods is significantly lower than in the first 1,000 hour period.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 6 of 20

ADR06 ELECTRICAL CHARACTERISTICS

VIN = 5.0 V to 40 V, TA = 25°C, unless otherwise noted.

Table 4.

Parameter Symbol Conditions Min Typ Max Unit

Output Voltage VOA and C grades 2.994 3.000 3.006 V

6 mV Initial Accuracy VOERR A and C grades

0.2 %

Output Voltage VOB grade 2.997 3.000 3.003 V

3 mV Initial Accuracy VOERR B grade

0.1 %

A grade, SOIC-8, –40°C < TA < +125°C 3 10 ppm/°C

A grade, TSOT-5, –40°C < TA < +125°C 25 ppm/°C

A grade, SC70-5, –40°C < TA < +125°C 25 ppm/°C

B grade, SOIC-8, –40°C < TA < +125°C 1 3 ppm/°C

B grade, TSOT-5, –40°C < TA < +125°C 9 ppm/°C

Temperature Coefficient TCVO

B grade, SC70-5, –40°C < TA < +125°C 9 ppm/°C

C grade, SOIC-8, –40°C < TA < +125°C 10 40 ppm/°C

Supply Voltage Headroom VIN – VO 2 V

Line Regulation ∆VO/∆VIN VIN = 15 V to 40 V, –40°C < TA < +125°C 7 30 ppm/V

Load Regulation ∆VO/∆ILOAD ILOAD = 0 to 10 mA, –40°C < TA < +125°C, VIN =

7.0 V

40 70 ppm/mA

Quiescent Current IIN No load, –40°C < TA < +125°C 0.65 1 mA

Voltage Noise eN p-p 0.1 Hz to 10 Hz 10 µV p-p

Voltage Noise Density eN1 kHz 510 nV/√Hz

Turn-On Settling Time tR 4 µs

Long-Term Stability1∆VO1,000 hours 50 ppm

Output Voltage Hysteresis ∆VO_HYS 70 ppm

Ripple Rejection Ratio RRR fIN = 10 kHz –75 dB

Short Circuit to GND ISC 30 mA

Voltage Output AT TEMP Pin VTEMP 550 mV

Temperature Sensitivity TCVTEMP 1.96 mV/°C

1 The long-term stability specification is noncumulative. The drift in subsequent 1,000 hour periods is significantly lower than in the first 1,000 hour period.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 7 of 20

DICE ELECTRICAL CHARACTERISTICS

VIN = up to 40 V, TA = 25°C, unless otherwise noted.

Table 5.

Parameter Symbol Conditions Min Typ Max Unit

Output Voltage

ADR01NBC VO25°C 9.995 10.004 10.005 V

ADR02NBC VO25°C 4.997 5.002 5.003 V

Temperature Coefficient TCVO–40°C < TA < +125°C 10 ppm/°C

Line Regulation

ADR01NBC ∆VO/∆VIN VIN = 15 V to 40 V 7 ppm/V

ADR02NBC ∆VO/∆VIN VIN = 7 V to 40 V 7 ppm/V

Load Regulation ∆VO/∆ILOAD ILOAD = 0 to 10 mA 40 ppm/mA

Quiescent Current IIN No load 0.65 mA

Voltage Noise eN p-p 0.1 Hz to 10 Hz 25 µV p-p

TEMP

GND

TRIM

OUT

(SENSE) V

OUT

(FORCE)

02747-F-003

DIE SIZE: 0.83mm × 1.01mm

Figure 3. Die Layout

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 8 of 20

ABSOLUTE MAXIMUM RATINGS

Ratings at 25°C, unless otherwise noted.

Table 6.

Parameter Rating

Supply Voltage 40 V

Output Short-Circuit Duration to GND Indefinite

Storage Temperature Range –65°C to +150°C

Operating Temperature Range –40°C to +125°C

Junction Temperature Range: KS, UJ, and

R Packages –65°C to +150°C

Lead Temperature Range (Soldering, 60 Sec) 300°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those listed in the operational sections

of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Table 7. Thermal Resistance

Package Type θJA1θJC Unit

SC70-5 (KS-5) 376 189 °C/W

TSOT-5 (UJ-5) 230 146 °C/W

SOIC-8 (R-8) 130 43 °C/W

1 θJA is specified for the worst-case conditions, that is, θJA is specified for

devices soldered in circuit boards for surface-mount packages.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although these products feature

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 9 of 20

PARAMETER DEFINITIONS

Temperature Coefficient

The change of output voltage with respect to operating tem-

perature changes normalized by the output voltage at 25°C. This

parameter is expressed in ppm/°C and can be determined by the

following equation:

)25(

)()(

]/[ ×

−×°

−

=° 12O

1O2O

OTTCV TVTV

CppmTCV

where:

VO(25°C) = VO at 25°C

VO(T1) = VO at Temperature 1

VO(T2) = VO at Temperature 2

Line Regulation

The change in output voltage due to a specified change in input

voltage. This parameter accounts for the effects of self-heating.

Line regulation is expressed in either percent per volt, parts-

per-million per volt, or microvolts per volt change in input

voltage.

Load Regulation

The change in output voltage due to a specified change in load

current. This parameter accounts for the effects of self-heating.

Load regulation is expressed in either microvolts per milliampere,

parts-per-million per milliampere, or ohms of dc output

resistance.

Long-Term Stability

Typical shift of output voltage at 25°C on a sample of parts

subjected to a test of 1,000 hours at 25°C:

)()( 1O0OO tVtVV −=∆

)(

)()(

][ ×

−

=∆ 0O

1O0O

OtV tVtV

ppmV

where:

VO(t0) = VO at 25°C at Time 0

VO(t1) = VO at 25°C after 100 hours of operation at 25°C

The majority of the shift is seen in the first 200 hours, and,

as time goes by, the drift decreases significantly. So for the

subsequent 1,000 hours’ time points, this drift is much smaller

than the first.

Thermal Hysteresis

Defined as the change of output voltage after the device is

cycled through temperature from +25°C to –40°C to +125°C

and back to +25°C. This is a typical value from a sample of parts

put through such a cycle.

TCOOHYSO VCVV __ )25( −°=

_10

)25(

][ ×

−°

=CV

VCV

ppmV O

TCOO

HYSO

where:

VO(25°C) = VO at 25°C

VO_TC = VO at 25°C after temperature cycle at +25°C to –40°C to

+125°C and back to +25°C

NOTES

Input Capacitor

Input capacitors are not required on the ADR01/ADR02/

ADR03/ADR06. There is no limit for the value of the capacitor

used on the input, but a 1 µF to 10 µF capacitor on the input

improves transient response in applications where the supply

suddenly changes. An additional 0.1 µF in parallel also helps to

reduce noise from the supply.

Output Capacitor

The ADR01/ADR02/ADR03/ADR06 do not require output

capacitors for stability under any load condition. An output

capacitor, typically 0.1 µF, filters out any low level noise voltage

and does not affect the operation of the part. On the other hand,

the load transient response can be improved with an additional

1 µF to 10 µF output capacitor in parallel. A capacitor here acts

as a source of stored energy for a sudden increase in load

current. The only parameter that degrades by adding an output

capacitor is the turn-on time, and it depends on the size of the

capacitor chosen.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 10 of 20

TYPICAL PERFORMANCE CHARACTERISTICS

TEMPERATURE (oC)

OUT

(V)

10.010

10.005

10.000

9.995

9.990

9.985

–40 –25 –10 5 20 35 50 65 80 95 110 125

02747-F-004

Figure 4. ADR01 Typical Output Voltage vs. Temperature

TEMPERATURE (

OUT

(V)

5.008

5.004

5.000

4.996

4.992

–40 –25 –10 5 20 35 50 65 80 95 110 125

02747-F-005

Figure 5. ADR02 Typical Output Voltage vs. Temperature

TEMPERATURE (

–40

OUT

(V)

2.502

2.501

–25 –10 5 20 35 50 65 80 95 110 125

2.500

2.499

2.498

02747-F-006

Figure 6. ADR03 Typical Output Voltage vs. Temperature

TEMPERATURE (oC)

OUT

(V)

3.002

3.001

3.000

2.999

2.998

–40 –25 –10 5 20 35 50 65 80 95 110 125

02747-F-007

Figure 7. ADR06 Typical Output Voltage vs. Temperature

12 2816 20 24 32 36 40

SUPPLY CURRENT (mA)

0.8

0.7

0.6

0.5

0.4

INPUT VOLTAGE (V)

+125

+25

–40

02747-F-008

Figure 8. ADR01 Supply Current vs. Input Voltage

12 2816 20 24 32 36 408

INPUT CURRENT (mA)

+125

0.8

0.7

0.6

0.5

0.4

INPUT VOLTAGE (V)

+25

–40

02747-F-009

Figure 9. ADR02 Supply Current vs. Input Voltage

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 11 of 20

INPUT VOLTAGE (V)

SUPPLY CURRENT (mA)

10 15 20 25 30 35 40

0.40

0.45

0.50

0.55

0.60

0.65

0.70

0.75

0.80

0.85

+125

–40

+25

02747-F-010

Figure 10. ADR03 Supply Current vs. Input Voltage

INPUT VOLTAGE (V)

SUPPLY CURRENT (mA)

10 15 20 25 30 35 40

0.40

0.45

0.50

0.55

0.60

0.65

0.70

0.75

0.80

+125

–40

+25

02747-F-011

Figure 11. ADR06 Supply Current vs. Input Voltage

85 125

= 0mA TO 10mA

LOAD REGULATION (ppm/mA)

TEMPERATURE (

= 40V

= 14V

500–40

–40

–30

–20

–10

02747-F-012

Figure 12. ADR01 Load Regulation vs. Temperature

85 125

= 0mA TO 5mA

LOAD REGULATION (ppm/mA)

TEMPERATURE (

= 40V

= 8V

0–40

–20

–10

02747-F-013

Figure 13. ADR02 Load Regulation vs. Temperature

LOAD REGULATION (ppm/mA)

TEMPERATURE (

–40 –25 –10 52035

50 65 80 95 110 125

= 40V

= 7V

= 0mA TO 10mA

02747-F-014

Figure 14. ADR03 Load Regulation vs. Temperature

LOAD REGULATION (ppm/mA)

–30

–20

–10

TEMPERATURE (

–40 –25 –10 520 35 50 65 80 95 110 125

= 40V

= 0mA TO 10mA

= 7V

02747-F-015

Figure 15. ADR06 Load Regulation vs. Temperature

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 12 of 20

–4

–2

–6

–8

TEMPERATURE (

LINE REGULATION (ppm/V)

–10

–40 –25 –10 52035

50 65 80 95 110 125

= 14V TO 40V

02747-F-016

Figure 16. ADR01 Line Regulation vs. Temperature

–4

–8

TEMPERATURE (

LINE REGULATION (ppm/V)

= 8V TO 40V

–40 –25 –10 52035

50 65 80 95 110 125

02747-F-017

Figure 17. ADR02 Line Regulation vs. Temperature

LINE REGULATION (ppm/mV)

–4

–2

TEMPERATURE (

–40 –25 –10 52035

50 65 80 95 110 125

02747-F-018

= 5V TO 40V

Figure 18. ADR03 Line Regulation vs. Temperature

LINE REGULATION (ppm/V)

–4

–2

TEMPERATURE (

–40 –25 –10 520

35 50 65 80 95 110 125

02747-F-019

= 6V TO 40V

Figure 19. ADR06 Line Regulation vs. Temperature

4602

LOAD CURRENT (mA)

810

DIFFERENTIAL VOLTAGE (V)

–40

+125

+25

02747-F-020

Figure 20. ADR01 Minimum Input-Output

Voltage Differential vs. Load Current

+25

LOAD CURRENT (mA)

810

–40

+125

DIFFERENTIAL VOLTAGE (V)

02747-F-021

Figure 21. ADR02 Minimum Input-Output

Voltage Differential vs. Load Current

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 13 of 20

4602

LOAD CURRENT (mA)

810

DIFFERENTIAL VOLTAGE (V)

+125

+25

–40

02747-F-022

Figure 22. ADR03 Minimum Input-Output

Voltage Differential vs. Load Current

2.0

1.0

4.0

3.5

3.0

1.5

0.5

2.5

0246

LOAD CURRENT (mA)

810

DIFFERENTIAL VOLTAGE (V)

+125

C +25

–40

4.5

02747-F-023

Figure 23. ADR06 Minimum Input-Output

Voltage Differential vs. Load Current

460

0.50 2

= 25

LOAD CURRENT (mA)

810

QUIESCENT CURRENT (mA)

0.55

0.60

0.65

0.70

02747-F-024

Figure 24. ADR01 Quiescent Current vs. Load Current

1µV/DIV

TIME (1s/DIV)

02747-F-025

Figure 25. ADR02 Typical Noise Voltage 0.1 Hz to 10 Hz

50µV/DIV

TIME (1ms/DIV)

02747-F-026

Figure 26. ADR02 Typical Noise Voltage 10 Hz to 10 KHz

NO LOAD CAPACITOR

NO INPUT CAPACITOR

OUT

5V/DIV

TIME (2.00ms/DIV)

02747-F-027

10V

Figure 27. ADR02 Line Transient Response

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 14 of 20

5V/DIV

OUT

100mV/DIV

TIME (1.00ms/DIV)

NO LOAD CAPACITOR

LOAD OFF LOAD ON

LOAD = 5mA

02747-F-028

Figure 28. ADR02 Load Transient Response

LOAD

= 100nF

5V/DIV

OUT

100mV/DIV

TIME (1.00ms/DIV)

02747-F-029

LOAD OFF LOAD ON

LOAD = 5mA

Figure 29. ADR02 Load Transient Response

= 0.01

NO LOAD CAPACITOR

10V/DIV

OUT

5V/DIV

TIME (4

s/DIV)

02747-F-030

Figure 30. ADR02 Turn-Off Response

10V/DIV

OUT

5V/DIV

TIME (4

s/DIV)

= 0.01

NO LOAD CAPACITOR

02747-F-031

Figure 31. ADR02 Turn-On Response

10V/DIV

OUT

5V/DIV

TIME (4

s/DIV)

= 0.01

NO INPUT CAPACITOR

02747-F-032

Figure 32. ADR02 Turn-Off Response

OUT

5V/DIV

10V/DIV

TIME (4

s/DIV)

= 0.01

NO INPUT CAPACITOR

02747-F-033

Figure 33. ADR02 Turn-On Response

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 15 of 20

APPLICATIONS

The ADR01/ADR02/ADR03/ADR06 are high precision, low

drift 10 V, 5 V, 2.5 V, and 3.0 V voltage references available in an

ultracompact footprint. The SOIC-8 version of the devices is a

drop-in replacement of the REF01/REF02/ REF03 sockets with

improved cost and performance.

These devices are standard band gap references. The band gap

cell contains two NPN transistors (Q18 and Q19) that differ in

emitter area by 2×. The difference in their VBE produces a

proportional-to-absolute temperature current (PTAT) in R14,

and, when combined with the VBE of Q19, produces a band gap

voltage, VBG, that is almost constant in temperature. With an

internal op amp and the feedback network of R5 and R6, VO is set

precisely at 10 V, 5 V, 2.5 V, and 3.0 V for the ADR01, ADR02,

ADR06, and ADR03, respectively. Precision laser trimming of

the resistors and other proprietary circuit techniques are used to

further enhance the initial accuracy, temperature curvature, and

drift performance of the ADR01/ADR02/ADR03/ADR06.

R1 R2 R3 R4

Q23

Q1 Q2 Q7 Q8

Q3 Q10

D3 C1

R13 Q12 Q13 R5

R12

Q14Q15

2X 1X V

R20 TRIM

Q18

TEMP

R27 Q19

Q16 Q17

Q20 R6

R42

R41

R24

R32

R11

R17

R14

GND

02747-F-034

Figure 34. Simplified Schematic Diagram

The PTAT voltage is made available at the TEMP pin of the

ADR01/ADR02/ADR03/ADR06. It has a stable 1.96 mV/°C

temperature coefficient, such that users can estimate the

temperature change of the device by knowing the voltage

change at the TEMP pin.

APPLYING THE ADR01/ADR02/ADR03/ADR06

The devices can be used without any external components to

achieve the specified performance. Because of the internal op

amp amplifying the band gap cell to 10 V/5 V/2.5 V/3.0 V,

power supply decoupling helps the transient response of the

ADR01/ADR02/ADR03/ADR06. As a result, a 0.1 µF ceramic

type decoupling capacitor should be applied as close as possible

to the input and output pins of the device. An optional 1 µF to

10 µF bypass capacitor can also be applied at the VIN node to

maintain the input under transient disturbance.

ADR01/

ADR02/

ADR03/

ADR06

0.1µF

OUT

TEMP TRIM

GND

02747-F-035

Figure 35. Basic Configuration

Output Adjustment

The ADR01/ADR02/ADR03/ADR06 trim terminal can be used

to adjust the output voltage over a nominal voltage. This feature

allows a system designer to trim system errors by setting the

reference to a voltage other than 10 V/5 V/2.5 V/3.0 V. For finer

adjustment, a series resistor of 470 kΩ can be added. With the

configuration shown in Figure 36, the ADR01 can be adjusted

from 9.70 V to 10.05 V, the ADR02 can be adjusted from 4.95 V

to 5.02 V, the ADR06 can be adjusted from 2.8 V to 3.3 V, and

the ADR03 can be adjusted from 2.3 V to 2.8 V. Adjustment of

the output does not significantly affect the temperature per-

formance of the device, provided the temperature coefficients of

the resistors are relatively low.

ADR01/

ADR02/

ADR03/

ADR06

OUT

TEMP TRIM

GND

pot

10kΩ

1kΩ

470kΩ

02747-F-036

Figure 36. Optional Trim Adjustment

Temperature Monitoring

As described previously, the ADR01/ADR02/ADR03/ADR06

provide a TEMP output (Pin 3) that varies linearly with tem-

perature. This output can be used to monitor the temperature

change in the system. The voltage at VTEMP is approximately

550 mV at 25°C, and the temperature coefficient is approximately

1.96 mV/°C (see Figure 37). A voltage change of 39.2 mV at the

TEMP pin corresponds to a 20°C change in temperature.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 16 of 20

02747-F-037

12525 50 75 100

0.40

0.80

0.75

0.70

0.65

0.60

0.55

0.50

0.45

–25 0–50

= 15V

SAMPLE SIZE = 5

TEMP

(V)

TEMPERATURE (

∆V

TEMP

/∆T1.96mV/

Figure 37. Voltage at TEMP Pin vs. Temperature

The TEMP function is provided as a convenience rather than a

precise feature. Because the voltage at the TEMP node is

acquired from the band gap core, current pulling from this pin

has a significant effect on V

OUT

. Care must be taken to buffer the

TEMP output with a suitable low bias current op amp, such as

the AD8601, AD820, or OP1177, all of which would result in

less than a 100 µV change in ∆V

OUT

(see Figure 38). Without

buffering, even tens of microamps drawn from the TEMP pin

can cause V

OUT

to fall out of specification.

15V

ADR01/

ADR02/

ADR03/

ADR06

OUT

TEMP TRIM

GND

V–

V+

OP1177

TEMP

1.9mV/

02747-F-038

Figure 38. Temperature Monitoring

NEGATIVE REFERENCE

Without using any matching resistors, a negative reference can

be configured as shown in Figure 39. For the ADR01, the volt-

age difference between V

OUT

and GND is 10 V. Because V

OUT

at virtual ground, U2 closes the loop by forcing the GND pin to

be the negative reference node. U2 should be a precision op

amp with a low offset voltage characteristic.

+15V

–15V

V–

V+

OP1177

–V

REF

ADR01/

ADR02/

ADR03/

ADR06

OUT

TEMP TRIM

GND

V TO 15

02747-F-039

Figure 39. Negative Reference

LOW COST CURRENT SOURCE

Unlike most references, the ADR01/ADR02/ADR03/ADR06

employ an NPN Darlington in which the quiescent current

remains constant with respect to the load current, as shown in

Figure 24. As a result, a current source can be configured as

shown in Figure 40 where I

SET

= (V

OUT

– V

)/R

SET

. I

is simply

the sum of I

SET

and I

. Although simple, I

varies typically from

0.55 to 0.65 mA, limiting this circuit to general-purpose

applications.

ADR01/

ADR02/

ADR03/

ADR06

OUT

GND

SET

= 10V/R

SET

0.6mA

= I

SET

+ I

02747-F-040

Figure 40. Low Cost Current Source

PRECISION CURRENT SOURCE WITH

ADJUSTABLE OUTPUT

A precision current source, on the other hand, can be

implemented with the circuit shown in Figure 41. By adding a

mechanical or digital potentiometer, this circuit becomes an

adjustable current source. If a digital potentiometer is used, the

load current is simply the voltage across terminals B to W of the

digital potentiometer divided by R

SET

REF

= (1)

where D is the decimal equivalent of the digital potentiometer

input code.

+12V

–12V

ADR01/

ADR02/

ADR03/

ADR06

OUT

TEMP TRIM

GND

V–

V+

OP1177

–5V TO V

AD5201

0V TO (5V + V

)

+12

SET

1kΩ

100kΩ

02747-F-041

Figure 41. Programmable 0 to 5 mA Current Source

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 17 of 20

To optimize the resolution of this circuit, dual-supply op amps

should be used because the ground potential of ADR02 can

swing from –5 V at zero scale to VL at full scale of the potenti-

ometer setting.

PROGRAMMABLE 4 TO 20 mA CURRENT

TRANSMITTER

Because of their precision, adequate current handling, and small

footprint, the devices are suitable as the reference sources for

many high performance converter circuits. One of these

applications is the multichannel 16-bit 4 to 20 mA current

transmitter in the industrial control market (see Figure 42). This

circuit employs a Howland current pump at the output, which

yields better efficiency, a lower component count, and a higher

voltage compliance than the conventional design with op amps

and MOSFETs. In this circuit, if the resistors are matched such

that R1 = R1′, R2 = R2′, R3 = R3′, the load current is

REF

R)R(R

132 ×

′

= (2)

where D is similarly the decimal equivalent of the DAC input

code and N is the number of bits of the DAC.

According to Equation 2, R3′ can be used to set the sensitivity.

R3′ can be made as small as necessary to achieve the current

needed within U4 output current driving capability. On the

other hand, other resistors can be kept high to conserve power.

15V V

OUT

GND

TEMP TRIM

U1 = ADR01/ADR02/ADR03/ADR06, REF01

U2 = AD5543/AD5544/AD5554

U3, U4 = AD8512

10V

+15V

–15V

REF

GND

RF IO

AD5544

DIGITAL INPUT

CODE 20%–100% FULL SCALE

U3 V

0V TO –10V

150kΩR2

15kΩ

10pF

VP R3

50Ω

AD8512

R3'

50Ω

R1'

150kΩLOAD

500Ω

4–20mA

R2'

15kΩ

02747-F-042

Figure 42. Programmable 4 to 20 mA Transmitter

In this circuit, the AD8512 is capable of delivering 20 mA of

current, and the voltage compliance approaches 15 V.

The Howland current pump yields a potentially infinite output

impedance, which is highly desirable, but resistance matching is

critical in this application. The output impedance can be deter-

mined using Equation 3. As can be seen by this equation, if the

resistors are perfectly matched, ZO is infinite. On the other hand,

if they are not matched, ZO is either positive or negative. If the

latter is true, oscillation may occur. For this reason, a capacitor, C1,

in the range of 1 pF to 10 pF should be connected between VP

and the output terminal of U4, to filter any oscillation.

⎟

⎠

⎞

⎜

⎝

⎛−

′

R1R2

R2R1R1

O (3)

In this circuit, an ADR01 provides the stable 10.000 V reference

for the AD5544 quad 16-bit DAC. The resolution of the adjust-

able current is 0.3 µA/step, and the total worst-case INL error is

merely 4 LSB. Such error is equivalent to 1.2 µA or a 0.006%

system error, which is well below most systems’ requirements.

The result is shown in Figure 43 with measurement taken at 25°C

and 70°C; total system error of 4 LSB at both 25°C and 70°C.

–1 0 655368192 16384 24576 32768 40960 49152 57344

CODE (Decimal)

INL (LSB)

= 500Ω

= 0mA TO 20mA

02747-F-043

Figure 43. Result of Programmable 4 to 20 mA Current Transmitter

Precision Boosted Output Regulator

A precision voltage output with boosted current capability can

be realized with the circuit shown in Figure 44. In this circuit,

U2 forces VO to be equal to VREF by regulating the turn-on of

N1, thereby making the load current furnished by VIN. In this

configuration, a 50 mA load is achievable at VIN of 15 V. Moderate

heat is generated on the MOSFET, and higher current can be

achieved with a replacement of a larger device. In addition, for a

heavy capacitive load with a fast edging input signal, a buffer

should be added at the output to enhance the transient response.

15V

200Ω

ADR01/

ADR02/

ADR03/

ADR06

OUT

TEMP TRIM

GND V–

V+

OP1177

2N7002

1µF

02747-F-044

Figure 44. Precision Boosted Output Regulator

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 18 of 20

OUTLINE DIMENSIONS

COMPLIANT TO JEDEC STANDARDS MO-203AA

2.00 BSC

0.30

0.15

0.10 MAX

1.00

0.90

0.70

SEATING

PLANE

1.10 MAX

0.22

0.08 0.46

0.36

0.26

PIN 1

2.10 BSC

0.65 BSC

1.25 BSC

0.10 COPLANARIT

Figure 45. 5-Lead Thin Shrink Small Outline Transistor Package [SC70]

(KS-5)

Dimensions shown in millimeters

PIN 1

1.60 BSC 2.80 BSC

1.90

BSC

0.95 BSC

0.20

0.08

0.60

0.45

0.30

8°

4°

0.50

0.30

0.10 MAX SEATING

PLANE

1.00 MAX

0.90

0.87

0.84

COMPLIANT TO JEDEC STANDARDS MO-193AB

2.90 BSC

Figure 46. 5-Lead Thin Small Outline Transistor Package [TSOT]

(UJ-5)

Dimensions shown in millimeters

0.25 (0.0098)

0.17 (0.0067)

1.27 (0.0500)

0.40 (0.0157)

0.50 (0.0196)

0.25 (0.0099)× 45°

8°

0°

1.75 (0.0688)

1.35 (0.0532)

SEATING

PLANE

0.25 (0.0098)

0.10 (0.0040)

5.00 (0.1968)

4.80 (0.1890)

4.00 (0.1574)

3.80 (0.1497)

1.27 (0.0500)

BSC

6.20 (0.2440)

5.80 (0.2284)

0.51 (0.0201)

0.31 (0.0122)

COPLANARIT

0.10

CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS

(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR

REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN

COMPLIANT TO JEDEC STANDARDS MS-012AA

Figure 47. 8-Lead Standard Small Outline Package [SOIC]

Narrow Body (R-8)

Dimensions shown in millimeters and (inches)

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 19 of 20

ORDERING GUIDES

ADR01 ORDERING GUIDE

Output

Voltage

Initial

Accuracy

Temperature

Coefficient

Model VO (V) (mV) (%) (ppm/°C)

Package

Description

Package

Option

Top

Mark1

Number of

Parts per

Reel/Tray

Temperature

Range (°C)

ADR01AR 10 10 0.1 10 SOIC-8 R-8 ADR01 98 –40 to +125

ADR01AR-REEL7 10 10 0.1 10 SOIC-8 R-8 ADR01 1,000 –40 to +125

ADR01BR 10 5 0.05 3 SOIC-8 R-8 ADR01 98 –40 to +125

ADR01BR-REEL7 10 5 0.05 3 SOIC-8 R-8 ADR01 1,000 –40 to +125

ADR01AUJ-REEL7 10 10 0.1 25 TSOT-23-5 UJ-5 R8A 3,000 –40 to +125

ADR01AUJ-R2 10 10 0.1 25 TSOT-23-5 UJ-5 R8A 250 –40 to +125

ADR01BUJ-REEL7 10 5 0.05 9 TSOT-23-5 UJ-5 R8B 3,000 –40 to +125

ADR01BUJ-R2 10 5 0.05 9 TSOT-23-5 UJ-5 R8B 250 –40 to +125

ADR01AKS-REEL7 10 10 0.1 25 SC70 KS-5 R8A 3,000 –40 to +125

ADR01AKS-R2 10 10 0.1 25 SC70 KS-5 R8A 250 –40 to +125

ADR01BKS-REEL7 10 5 0.05 9 SC70 KS-5 R8B 3,000 –40 to +125

ADR01BKS-R2 10 5 0.05 9 SC70 KS-5 R8B 250 –40 to +125

ADR01CRZ210 10 0.1 40 SOIC-8 R-8 ADR01 98 –40 to +125

ADR01CRZ-REEL2 10 10 0.1 40 SOIC-8 R-8 ADR01 2,500 –40 to +125

ARR01NBC 10 5 0.05 10 (Typ) Dice 360

1 First line shows part number ADR01; second line shows A or B for the grade, with the YYMM date code; third line shows the lot number.

2 Z = Pb-free part.

ADR02 ORDERING GUIDE

Output

Voltage

Initial

Accuracy

Temperature

Coefficient

Model VO (V) (mV) (%) (ppm/°C)

Package

Description

Package

Option

Top

Mark1

Number of

Parts per

Reel/Tray

Temperature

Range (°C)

ADR02AR 5 5 0.1 10 SOIC-8 R-8 ADR02 98 –40 to +125

ADR02AR-REEL 5 5 0.1 10 SOIC-8 R-8 ADR02 1,000 –40 to +125

ADR02AR-REEL7 5 5 0.1 10 SOIC-8 R-8 ADR02 1,000 –40 to +125

ADR02ARZ2 5 5 0.1 10 SOIC-8 R-8 ADR02 98 –40 to +125

ADR02ARZ-REEL2 5 5 0.1 10 SOIC-8 R-8 ADR02 2,500 –40 to +125

ADR02BR 5 3 0.06 3 SOIC-8 R-8 ADR02 98 –40 to +125

ADR02BR-REEL7 5 3 0.06 3 SOIC-8 R-8 ADR02 1,000 –40 to +125

ADR02AUJ-REEL7 5 5 0.1 25 TSOT-23-5 UJ-5 R9A 3,000 –40 to +125

ADR02AUJ-R2 5 5 0.1 25 TSOT-23-5 UJ-5 R9A 250 –40 to +125

ADR02BUJ-REEL7 5 3 0.06 9 TSOT-23-5 UJ-5 R9B 3,000 –40 to +125

ADR02BUJ-R2 5 3 0.06 9 TSOT-23-5 UJ-5 R9B 250 –40 to +125

ADR02AKS-REEL7 5 5 0.1 25 SC70 KS-5 R9A 3,000 –40 to +125

ADR02AKS-R2 5 5 0.1 25 SC70 KS-5 R9A 250 –40 to +125

ADR02BKS-REEL7 5 3 0.06 9 SC70 KS-5 R9B 3,000 –40 to +125

ADR02BKS-R2 5 3 0.06 9 SC70 KS-5 R9B 250 –40 to +125

ADR02CRZ25.0 5 0.1 40 SOIC-8 R-8 ADR02 98 –40 to +125

ADR02CRZ-REEL2 5.0 5 0.1 40 SOIC-8 R-8 ADR02 2500 –40 to +125

ARR02NBC 5 3 0.06 10 (Typ) Dice 360

1 First line shows part number ADR02; second line shows A or B for the grade, with the YYMM date code; third line shows the lot number.

2 Z = Pb-free part.

ADR01/ADR02/ADR03/ADR06

Rev. F | Page 20 of 20

ADR03 ORDERING GUIDE

Output

Voltage

Initial

Accuracy

Temperature

Coefficient

Model VO (V) (mV) (%) (ppm/°C)

Package

Description

Package

Option

Top

Mark1

Number of

Parts per

Reel/Tray

Temperature

Range (°C)

ADR03AR 2.5 5 0.2 10 SOIC-8 R-8 ADR03 98 –40 to +125

ADR03AR-REEL7 2.5 5 0.2 10 SOIC-8 R-8 ADR03 1,000 –40 to +125

ADR03BR 2.5 2.5 0.1 3 SOIC-8 R-8 ADR03 98 –40 to +125

ADR03BR-REEL7 2.5 2.5 0.1 3 SOIC-8 R-8 ADR03 1,000 –40 to +125

ADR03AUJ-REEL7 2.5 5 0.2 25 TSOT-23-5 UJ-5 RFA 3,000 –40 to +125

ADR03AUJ-R2 2.5 5 0.2 25 TSOT-23-5 UJ-5 RFA 250 –40 to +125

ADR03BUJ-REEL7 2.5 2.5 0.1 9 TSOT-23-5 UJ-5 RFB 3,000 –40 to +125

ADR03BUJ-R2 2.5 2.5 0.1 9 TSOT-23-5 UJ-5 RFB 250 –40 to +125

ADR03AKS-REEL7 2.5 5 0.2 25 SC70 KS-5 RFA 3,000 –40 to +125

ADR03AKS-R2 2.5 5 0.2 25 SC70 KS–5 RFA 250 –40 to +125

ADR03BKS–REEL7 2.5 2.5 0.1 9 SC70 KS–5 RFB 3,000 –40 to +125

ADR03BKS–R2 2.5 2.5 0.1 9 SC70 KS–5 RFB 250 –40 to +125

ADR03BKSZ–REEL722.5 2.5 0.1 9 SC70 KS–5 RFB 3,000 –40 to +125

ADR03CRZ2 2.5 5 0.1 40 SOIC-8 R-8 ADR02 98 –40 to +125

ADR03CRZ-REEL2 2.5 5 0.1 40 SOIC-8 R-8 ADR02 2500 –40 to +125

1 First line shows part number ADR03; second line shows A or B for the grade, with the YYMM date code; third line shows the lot number.

2 Z = Pb-free part.

ADR06 ORDERING GUIDE

Output

Voltage

Initial

Accuracy

Temperature

Coefficient

Model VO (V) (mV) (%) (ppm/°C)

Package

Description

Package

Option

Top

Mark1

Number of

Parts per

Reel/Tray

Temperature

Range (°C)

ADR06AR 3.0 6 0.2 10 SOIC-8 R-8 ADR06 98 –40 to +125

ADR06AR-REEL7 3.0 3 0.2 10 SOIC-8 R-8 ADR06 1,000 –40 to +125

ADR06BR 3.0 6 01 3 SOIC-8 R-8 ADR06 98 –40 to +125

ADR06BR-REEL7 3.0 3 0.1 3 SOIC-8 R-8 ADR06 1,000 –40 to +125

ADR06AUJ-R2 3.0 6 0.2 25 TSOT-23-5 UJ-5 RWA 250 –40 to +125

ADR06AUJ-REEL7 3.0 6 0.2 25 TSOT-23-5 UJ-5 RWA 3,000 –40 to +125

ADR06BUJ–R2 3.0 3 0.1 9 TSOT-23-5 UJ-5 RWB 250 –40 to +125

ADR06BUJ-REEL7 3.0 3 0.1 9 TSOT-23-5 UJ-5 RWB 3,000 –40 to +125

ADR06AKS-R2 3.0 6 0.2 25 SC70 KS-5 RWA 250 –40 to +125

ADR06AKS-REEL7 3.0 6 0.2 25 SC70 KS–5 RWA 3,000 –40 to +125

ADR06BKS-R2 3.0 3 0.1 9 SC70 KS-5 RWB 250 –40 to +125

ADR06BKS–REEL7 3.0 3 0.1 9 SC70 KS–5 RWB 3,000 –40 to +125

ADR06CRZ23.0 6 0.2 40 SOIC-8 R-8 ADR06 98 –40 to +125

ADR06CRZ-REEL2 3.0 6 0.2 40 SOIC-8 R-8 ADR06 2500 –40 to +125

1 First line shows part number ADR06; second line shows A or B for the grade, with the YYMM date code; third line shows the lot number.

2 Z = Pb-free part.

registered trademarks are the property of their respective owners.

C02747–0–7/04(F)