Catalog Number: Product ID: UPC Number: Status: LU18SST 7TAD013030R0006 78620993110 A 1/2 Inch 316 Stainless Steel Form 8 (LU) Universal Conduit Elbow with Polished Finish * Radius is the same as bent conduit, so you can pull wire through the body * Angled cover port enables easier wire pulling and uses standard covers * Tapered (NPT) threads and integral bushings to protect wire insulation * UL Listed as an enclosure, so splices are allowed inside * Rated for 40 percent wire fill Actual * Connect conduit sections * Act as pull outlets when conductors are being installed * Provide easy access for splices in branch conductors * Make 90 degree bends in conduit runs * Act as mounting outlets for wiring devices and light fixtures * Provide access to conductors for maintenance and future system changes North American Specifications (UNSPSC) UNSPSC 39131708 Electrical conduit fitting body IGCC 5563 Electrical conduit fitting body Brand Name T&B Type Form 8 Conduit Body Special Features Marine-Grade Type 316 Stainless Steel Construction In Rugged Form 8 Design Application Connect Conduit Sections, Provide Easy Access to Conductors for Maintenance and Future System Changes Standard UL E2969, CSA Hub Size 1/2 in Form Form 8 Material Stainless Steel Finish Polished Packaging Outer Quantity 1 Outer Dimensions (inches) 6.43x2.59x2.95 Weight Uom 1.65 lbs. Each Documents / Support Tools Technical Drawing / Data Sheet WSD-000532 Technical Drawing / Data Sheet Canada Available on Website Header 3D Model Available on Website For further technical assistance, please contact us... ABB Installation Products - USA 860 Ridge Lake Blvd. Memphis, TN 38120 www.tnb.com ABB Installation Products Technical Support MS 3B-50 860 Ridge Lake Blvd. Memphis, TN 38120 Hours: 7AM - 6PM CDT Monday-Friday Phone: (888) 862-3289 Fax: (901) 252-1321 Email:techsupport@tnb.com