Axial Ferrite Bead Inductor Features: * * * Axial ferrite bead inductors Applications include suppression in digital equipment and clock circuits Supplied bandoliered on reels of 5,000 suitable for automatic insertion Specifications: Impedance DC Current Rating Ferrite Mounting MSL SVHC Body Diameter Core Material External Length / Height Impedance @ 100MHz Typ Impedance @ 10MHz Typ Inductor Case Style Inductor Type No. of Pins Package / Case Reel Quantity : 134 : 3A : Through Hole : MSL 2 - 1 year : No SVHC (18-Jun-2012) : 3.5mm : Ferrite : 9mm : 105 : 40 : Axial Leaded : Ferrite Bead :2 : Axial : 5,000 Impedance Z Minimum 120() Test Frequency 100 (MHz) Average 134() Dimensions A B C E 3.5 0.2 9.0 0.3 52.0 1.0 5 0.5 Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <1> 11/09/12 V1.0 Axial Ferrite Bead Inductor Part Number Table Bead Dimensions Description Current Rating (A) Length Diameter Inductor, Ferrite Bead, 105Z 3 9 3.5 Part Number MCAB 035090-33 Dimensions : Millimetres Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 11/09/12 V1.0