MNCLC522A-X REV 0A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC/DC PARAMETERS: Miscellaneous Performance Tests.
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vs = +5V dc, gain setting voltage (Vg) = +1.1V, Av = 10V/V, load resistance (Rl) = 100 Ohms, feedback
resistance (Rf) = 1 KOhms, and gain setting resistance (Rg) = 182 Ohms -55 C < Ta < +125 C (Note 3)
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
It Buffer Tail
Current 1 1.37 mA 1, 3
1 1.15 mA 2
CMIR Vin Common Mode
Voltage Range 1 -1.2 +1.2 V 1, 2
1 -1.4 +1.4 V 3
Vgosh Vg Input Voltage Av = 10V/V 1 930 1050 mV 1, 2,
3
Vgosl Vg Input Voltage Av = 0V/V 1 -1055 -895 mV 1, 2,
3
Vout Output Voltage
Range No Load 1 -3.7 +3.7 V 1, 2
1 -3.5 +3.5 V 3
Iout Output Current 1 -47 +47 mA 1, 2
1 -25 +25 mA 3
Rin Vin Signal Input
Resistance 1 650 KOhms 4, 5
1 175 KOhms 6
Cin Vin Signal Input
Capacitance 1 2 pF 4, 5,
6
Ring Vg Control Input
resistance 1 38 KOhms 4, 5
1 15 KOhms 6
Cing Vg Control Input
Capacitance 1 2.0 pF 4, 5,
6
Ro Output Impedance DC 1 0.2 Ohms 4, 5
1 0.6 Ohms 6
Note 1: If not tested, shall be guaranteed to the limits specified in table I
Note 2: Group A testing only.
Note 3: The algebraic convention, whereby the most negative value is a minimum and most
positive is a maximum, is used in this table. Negative current shall be defined as
convential current flow out of a device terminal.
8