SEMICONDUCTOR TECHNICAL DATA L SUFFIX CERAMIC CASE 632 The MC14000UB dual 3-input NOR gate plus inverter is constructed with MOS P-channel and N-channel enhancement mode devices in a single monolithic structure. These complementary MOS logic gates find primary use where low power dissipation and/or high noise immunity is desired. * * * * P SUFFIX PLASTIC CASE 646 Diode Protection on All Inputs Supply Voltage Range = 3.0 Vdc to 18 Vdc Logic Swing Independent of Fanout Pin-for-Pin Replacement for CD4000UB IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIIIIIIIIII IIIIII III IIIIIIIIIIIIIIIIIIIII IIII IIIIIIIIIII IIIIII III IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII D SUFFIX SOIC CASE 751A MAXIMUM RATINGS* (Voltages Referenced to VSS) Symbol VDD Parameter DC Supply Voltage Value Unit - 0.5 to + 18.0 V Vin, Vout Input or Output Voltage (DC or Transient) - 0.5 to VDD + 0.5 V lin, lout Input or Output Current (DC or Transient), per Pin 10 mA PD Power Dissipation, per Package 500 mW Tstg Storage Temperature - 65 to + 150 _C 260 _C TL Lead Temperature (8-Second Soldering) * Maximum Ratings are those values beyond which damage to the device may occur. Temperature Derating: Plastic "P and D/DW" Packages: - 7.0 mW/_C From 65_C To 125_C Ceramic "L" Packages: - 12 mW/_C From 100_C To 125_C ORDERING INFORMATION MC14XXXUBCP MC14XXXUBCL MC14XXXUBD Plastic Ceramic SOIC TA = - 55 to 125C for all packages. LOGIC DIAGRAM 3 4 6 5 11 12 13 CIRCUIT SCHEMATIC VDD 10 14 11 12 13 8 8 9 VDD = PIN 14 VSS = PIN 7 3 4 9 5 VSS 7 6 10 PIN ASSIGNMENT NC 1 14 VDD NC 2 13 IN 3B IN 1A 3 12 IN 2B IN 2A 4 11 IN 1B IN 3A 5 10 OUTB OUTA 6 9 OUTC VSS 7 8 IN 1C NC = NO CONNECTION REV 3 1/94 MC14000UB Motorola, Inc. 1995 2 MOTOROLA CMOS LOGIC DATA IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIII IIII III IIIIII IIIIIIII IIIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIIIIII IIIIII IIIIIIIIII IIII III III IIII III IIII III IIII III III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIIIIII IIIIII IIIIIIIIIIIIIIIIIIII IIII III IIII III IIII III III IIIIII IIIIIIII IIIIII IIIIIIIIIIIIIIIIIIII IIIIIII IIIIIIIIIII IIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS) Characteristic Output Voltage Vin = VDD or 0 Symbol - 55_C 25_C + 125_C VDD Vdc Min Max Min Typ # Max Min Max Unit "0" Level VOL 5.0 10 15 -- -- -- 0.05 0.05 0.05 -- -- -- 0 0 0 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 Vdc "1" Level VOH 5.0 10 15 4.95 9.95 14.95 -- -- -- 4.95 9.95 14.95 5.0 10 15 -- -- -- 4.95 9.95 14.95 -- -- -- Vdc "0" Level VIL 5.0 10 15 -- -- -- 1.0 2.0 2.5 -- -- -- 2.25 4.50 6.75 1.0 2.0 2.5 -- -- -- 1.0 2.0 2.5 5.0 10 15 4.0 8.0 12.5 -- -- -- 4.0 8.0 12.5 2.75 5.50 8.25 -- -- -- 4.0 8.0 12.5 -- -- -- 5.0 5.0 10 15 - 1.2 - 0.25 - 0.62 - 1.8 -- -- -- -- - 1.0 - 0.2 - 0.5 - 1.5 - 1.7 - 0.36 - 0.9 - 3.5 -- -- -- -- - 0.7 - 0.14 - 0.35 - 1.1 -- -- -- -- IOL 5.0 10 15 0.64 1.6 4.2 -- -- -- 0.51 1.3 3.4 0.88 2.25 8.8 -- -- -- 0.36 0.9 2.4 -- -- -- mAdc Input Current Iin 15 -- 0.1 -- 0.00001 0.1 -- 1.0 Adc Input Capacitance (Vin = 0) Cin -- -- -- -- 5.0 7.5 -- -- pF Quiescent Current (Per Package) IDD 5.0 10 15 -- -- -- 0.25 0.5 1.0 -- -- -- 0.0005 0.0010 0.0015 0.25 0.5 1.0 -- -- -- 7.5 15 30 Adc IT 5.0 10 15 Vin = 0 or VDD Input Voltage (VO = 4.5 Vdc) (VO = 9.0 Vdc) (VO = 13.5 Vdc) "1" Level VIH (VO = 0.5 Vdc) (VO = 1.0 Vdc) (VO = 1.5 Vdc) Output Drive Current (VOH = 2.5 Vdc) (VOH = 4.6 Vdc) (VOH = 9.5 Vdc) (VOH = 13.5 Vdc) Vdc Vdc IOH Source (VOL = 0.4 Vdc) (VOL = 0.5 Vdc) (VOL = 1.5 Vdc) Sink Total Supply Current** (Dynamic plus Quiescent, Per Gate, CL = 50 pF) mAdc IT = (0.3 A/kHz) f + IDD/N IT = (0.6 A/kHz) f + IDD/N IT = (0.8 A/kHz) f + IDD/N Adc #Data labelled "Typ" is not to be used for design purposes but is intended as an indication of the IC's potential performance. ** The formulas given are for the typical characteristics only at 25_C. To calculate total supply current at loads other than 50 pF: IT(CL) = IT(50 pF) + (CL - 50) Vfk where: IT is in H (per package), CL in pF, V = (VDD - VSS) in volts, f in kHz is input frequency, and k = 0.001 x the number of exercised gates per package. This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS (Vin or Vout) VDD. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open. MOTOROLA CMOS LOGIC DATA MC14000UB 3 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIII IIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIII IIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII SWITCHING CHARACTERISTICS* (CL = 50 pF, TA = 25_C) Characteristic Symbol Output Rise Time tTLH = (3.0 ns/pF) CL + 30 ns tTLH = (1.5 ns/pF) CL + 15 ns tTLH = (1.1 ns/pF) CL + 10 ns tTLH Output Fall Time tTHL = (1.5 ns/pF) CL + 25 ns tTHL = (0.75 ns/pF) CL + 12.5 ns tTHL = (0.55 ns/pF) CL + 9.5 ns tTHL Propagation Delay Time tPLH, tPHL = (1.7 ns/pF) CL + 30 ns tPLH, tPHL = (0.66 ns/pF) CL + 22 ns tPLH, tPHL = (0.50 ns/pF) CL + 15 ns tPLH, tPHL VDD Vdc Min Typ # Max 5.0 10 15 -- -- -- 180 90 65 360 180 130 5.0 10 15 -- -- -- 100 50 40 200 100 80 5.0 10 15 -- -- -- 115 55 40 230 110 80 Unit ns ns ns * The formulas given are for the typical characteristics only at 25_C. #Data labelled "Typ" is not to be used for design purposes but is intended as an indication of the IC's potential performance. VDD 20 ns 14 OUTPUT 7 VSS VDD 90% 50% 10% INPUT INPUT PULSE GENERATOR 20 ns VSS tPHL CL tPLH VOH 90% 50% 10% OUTPUT VOL tTHL tTLH Figure 1. Switching Time Test Circuit and Waveforms 16 16 VDD = 15 Vdc c 10 Vdc 10 a ONE INPUT ONLY AND INVERTER b TWO INPUTS c THREE INPUTS b a c 8.0 5.0 Vdc 6.0 4.0 c b 8.0 ID = 15 Vdc 6.0 b 4.0 ID = 10 Vdc a 2.0 2.0 0 0 0 2.0 4.0 6.0 8.0 10 12 14 Vin, INPUT VOLTAGE (Vdc) Figure 2. Typical Voltage and Current Transfer Characteristics MC14000UB 4 UNUSED INPUTS CONNECTED TO VSS 14 16 Vout , OUTPUT VOLTAGE (Vdc) a 12 VDD = 15 Vdc TA = 25C ID , DRAIN CURRENT (mAdc) Vout , OUTPUT VOLTAGE (Vdc) 14 12 10 Vdc 10 b a 8.0 6.0 a a TA = + 125C b TA = - 55C b 5.0 Vdc 4.0 a b 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 Vin, INPUT VOLTAGE (Vdc) Figure 3. Typical Voltage Transfer Characteristics versus Temperature MOTOROLA CMOS LOGIC DATA OUTLINE DIMENSIONS L SUFFIX CERAMIC DIP PACKAGE CASE 632-08 ISSUE Y -A- 14 9 1 7 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. -B- C -T- L K SEATING PLANE F G D N M J 14 PL 0.25 (0.010) M T A S 14 PL 0.25 (0.010) M T B P SUFFIX PLASTIC DIP PACKAGE CASE 646-06 ISSUE L 14 8 1 7 B A F L C J N H G D SEATING PLANE MOTOROLA CMOS LOGIC DATA K M S DIM A B C D F G J K L M N INCHES MIN MAX 0.750 0.785 0.245 0.280 0.155 0.200 0.015 0.020 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15_ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.94 6.23 7.11 3.94 5.08 0.39 0.50 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15_ 0.51 1.01 NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M N INCHES MIN MAX 0.715 0.770 0.240 0.260 0.145 0.185 0.015 0.021 0.040 0.070 0.100 BSC 0.052 0.095 0.008 0.015 0.115 0.135 0.300 BSC 0_ 10_ 0.015 0.039 MILLIMETERS MIN MAX 18.16 19.56 6.10 6.60 3.69 4.69 0.38 0.53 1.02 1.78 2.54 BSC 1.32 2.41 0.20 0.38 2.92 3.43 7.62 BSC 0_ 10_ 0.39 1.01 MC14000UB 5 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751A-03 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A- 14 8 -B- 1 P 7 PL 0.25 (0.010) 7 G M F -T- M K D 14 PL 0.25 (0.010) M T B S M R X 45 _ C SEATING PLANE B A S J DIM A B C D F G J K M P R MILLIMETERS MIN MAX 8.55 8.75 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.228 0.244 0.010 0.019 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 MC14000UB 6 *MC14000UB/D* MOTOROLA CMOSMC14000UB/D LOGIC DATA