FR1A THRU FR1K
SURFACE MOUNT FAST SWITCHING RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere
FEATURES
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Fast recovery times for high efficiency
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated junction
l High temperature soldering:
260/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS
FR1A FR1B FR1D FR1G FR1J FR1K UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Volts
Maximum RMS Voltage VRMS 35 70 140 280 420 560 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 Volts
Maximum Average Forward Rectified Current,
at TL=90 I(AV) 1.0 Amps
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load(JEDEC method) IFSM 30.0 Amps
Maximum Instantaneous Forward Voltage at 1.0A VF 1.3 Volts
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=125 IR 5.0
150 A
Maximum Reverse Recovery Time (Note 1) TJ=25
TRR 150 250 500 nS
Typical Junction capacitance (Note 2) CJ 12 PF
Maximum Thermal Resistance (Note 3) RJL 30 /W
Operating and Storage Temperature Range TJ,TSTG -50 to +150
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
SMB/DO-214AA
2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts
3. 8.0mm2 (.013mm thick) land areas
RATING AND CHARACTERISTIC CURVES
FR1A THRU FR1K
Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-TYPICAL JUNCTION CAPACITANCE
Fig. 3-PEAK FORWARD SURGE CURRENT Fig. 4-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
Fig. 5-REVERSE RECOVERY TIME CHARACTERISTICS AND TEST CIRCUIT DIAGRAM
