Product features
Six winding, surface mount devices that
offer more than 500 usable inductor or
transformer configurations
High power density and low profile
Low radiated noise and tightly coupled
windings
Power range from 1 Watt – 70 Watts
Frequency range to over 1 MHz
500 Vac Isolation
Ferrite core material
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
Technical Data 4301 Effective August 2017
Supersedes March 2007
Applications
Inductors: buck, boost, coupled, choke,
filter, resonant, noise filtering, differential,
forward, common mode
Transformers: flyback, feed forward, push-
pull, multiple output, inverter, step-up, step-
down, gate drive, base drive, wide band,
pulse, control, impedance, isolation,
bridging, ringer, converter, autoAutomotive
electronics (under hood, interior/exterior)
Telematics
GPS
LED Lighting
LCD Display
Portable media devices
Environmental data
Storage temperature range (component):
-55 °C to +125 °C
Operating temperature range:
-40 °C to +125 °C
(ambient plus self-temperature rise)
Solder reflow temperature:
J-STD-020 (latest revision) compliant
2
Technical Data 4301
Effective August 2017
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
Product specifications
Leakage Thermal
Part (1) L(BASE)SAT(BIASE)RMSI(BASE)RB(ASE) Volt-µSEC(BASE)EPEAK(BASE) Inductance Resistance
Number µH (A) (A)Ohms µVs µJ (BASE)µH °C/Watt
(NOM)(2) (TYP)(3)(4) (TYP)(3)(5) (MAX)(6) (MAX)(7) (TYP)(8) (TYP) (TYP)(9)
VPH1-1400-R(10) 201.6 +/-30% 0.04 0.55 0.344 32.9 0.11 0.212 60.7
VP1-1400-R(10) 89.6 +/-30% 0.06 0.85 0.145 21.8 0.11 0.096 60.7
VPH1-0190-R 27.4 +/-20% 0.29 0.55 0.344 32.9 0.77 0.212 60.7
VP1-0190-R 12.2 +/-20% 0.43 0.85 0.145 21.8 0.77 0.096 60.7
VPH1-0102-R 14.7 +/-20% 0.53 0.55 0.344 32.9 1.45 0.212 60.7
VP1-0102-R 6.5 +/-20% 0.80 0.85 0.145 21.8 1.45 0.096 60.7
VPH1-0076-R 10.9 +/-20% 0.72 0.55 0.344 32.9 1.92 0.212 60.7
VP1-0076-R 4.9 +/-20% 1.06 0.85 0.145 21.8 1.92 0.096 60.7
VPH1-0059-R 8.5 +/-20% 0.92 0.55 0.344 32.9 2.48 0.212 60.7
VP1-0059-R 3.8 +/-20% 1.37 0.85 0.145 21.8 2.48 0.096 60.7
VPH2-1600-R(10) 160 +/-30% 0.07 0.95 0.159 48.3 0.29 0.165 44.0
VP2-1600-R(10) 78.4 +/-30% 0.10 1.26 0.090 33.7 0.29 0.083 44.0
VPH2-0216-R 21.6 +/-20% 0.53 0.95 0.159 48.3 2.11 0.165 44.0
VP2-0216-R 10.6 +/-20% 0.76 1.26 0.090 33.7 2.11 0.083 44.0
VPH2-0116-R 11.6 +/-20% 0.99 0.95 0.159 48.3 3.94 0.165 44.0
VP2-0116-R 5.7 +/-20% 1.41 1.26 0.090 33.7 3.94 0.083 44.0
VPH2-0083-R 8.3 +/-20% 1.39 0.95 0.159 48.3 5.47 0.165 44.0
VP2-0083-R 4.1 +/-20% 1.95 1.26 0.090 33.7 5.47 0.083 44.0
VPH2-0066-R 6.6 +/-20% 1.74 0.95 0.159 48.3 7.01 0.165 44.0
VP2-0066-R 3.2 +/-20% 2.50 1.26 0.090 33.7 7.01 0.083 44.0
VPH3-0780-R(10) 132 +/-30% 0.07 0.97 0.14 39.8 0.24 0.125 43.4
VP3-0780-R(10) 63.2 +/-30% 0.10 1.47 0.061 27.7 0.24 0.058 43.4
VPH3-0138-R 23.3 +/-20% 0.41 0.97 0.14 39.8 1.36 0.125 43.4
VP3-0138-R 11.2 +/-20% 0.59 1.47 0.061 27.7 1.36 0.058 43.4
VPH3-0084-R 14.2 +/-20% 0.67 0.97 0.14 39.8 2.23 0.125 43.4
VP3-0084-R 6.8 +/-20% 0.97 1.47 0.061 27.7 2.23 0.058 43.4
VPH3-0055-R 9.3 +/-20% 1.02 0.97 0.14 39.8 3.38 0.125 43.4
VP3-0055-R 4.5 +/-20% 1.46 1.47 0.061 27.7 3.38 0.058 43.4
VPH3-0047-R 7.94 +/-20% 1.19 0.97 0.14 39.8 4.00 0.125 43.4
VP3-0047-R 3.8 +/-20% 1.73 1.47 0.061 27.7 4.00 0.058 43.4
VPH4-0860-R(10) 159.65 +/-30% 0.11 1.41 0.0828 64.6 0.57 0.156 39.4
VP4-0860-R(10) 87.0 +/-30% 0.15 1.70 0.057 44.7 0.57 0.075 39.4
VPH4-0140-R 23.7 +/-20% 0.65 1.41 0.0828 64.6 3.54 0.156 39.4
VP4-0140-R 11.3 +/-20% 0.95 1.70 0.057 44.7 3.54 0.075 39.4
VPH4-0075-R 12.7 +/-20% 1.21 1.41 0.0828 64.6 6.55 0.156 39.4
VP4-0075-R 6.1 +/-20% 1.75 1.70 0.057 44.7 6.55 0.075 39.4
VPH4-0060-R 10.1 +/-20% 1.52 1.41 0.0828 64.6 8.16 0.156 39.4
VP4-0060-R 4.9 +/-20% 2.18 1.70 0.057 44.7 8.16 0.075 39.4
VPH4-0047-R 7.94 +/-20% 1.94 1.41 0.0828 64.6 10.52 0.156 39.4
VP4-0047-R 3.8 +/-20% 2.81 1.70 0.057 44.7 10.52 0.075 39.4
VPH5-1200-R(10) 173 +/-30% 0.14 1.70 0.0711 98.4 1.11 0.235 30.3
VP5-1200-R(10) 76.8 +/-30% 0.20 2.08 0.047 65.6 1.11 0.105 30.3
VPH5-0155-R 22.3 +/-20% 1.05 1.70 0.0711 98.4 8.83 0.235 30.3
VP5-0155-R 9.9 +/-20% 1.60 2.08 0.047 65.6 8.83 0.105 30.3
VPH5-0083-R 12 +/-20% 1.96 1.70 0.0711 98.4 16.07 0.235 30.3
VP5-0083-R 5.3 +/-20% 2.95 2.08 0.047 65.6 16.07 0.105 30.3
VPH5-0067-R 9.65 +/-20% 2.43 1.70 0.0711 98.4 19.83 0.235 30.3
VP5-0067-R 4.3 +/-20% 3.63 2.08 0.047 65.6 19.83 0.105 30.3
VPH5-0053-R 7.63 +/-20% 3.07 1.70 0.0711 98.4 25.10 0.235 30.3
VP5-0053-R 3.4 +/-20% 4.59 2.08 0.047 65.6 25.10 0.105 30.3
www.eaton.com/electronics
www.eaton.com/electronics
3
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
Technical Data 4301
Effective August 2017
(1) The first three or four digits in the part number signify the size of the
package. The next four digits specify the AL, or nanoHenries per turn
squared. -R indicates RoHS compliant.
(2) LBASE = Nominal Inductance of a single winding.
(3) IBASE is the lessor of ISAT(BASE) and IRMS(BASE).
(4) Peak current that will result in 30% saturation of the core. This
current value assumes that equal current flows in all six windings.
For applications in which all windings are not simultaneously driven
(i.e. flyback, SEPIC, Cuk, etc.), the saturation current per winding
may be calculated as follows:
ISAT=6 x ISAT(BASE)
Number of Windings Driven
(5) RMS Current that results in a surface temperature of approximately
40 °C above ambient. The 40 °C rise occurs when the specified
current flows through each of the six windings.
(6) Maximum DC Resistance of each winding.
(7) For multiple windings in series, the volt-µsecondTOTAL (µVs) capability
varies as the number of windings in series (S):
Volt-µsecTOTAL = S xVolt-µsec(BASE)
For multiple windings in parallel, the volt-µsecondTOTAL (µVs) capability
is as shown in the table above.
(8) Maximum Energy capability of each winding. This is based on 30%
saturation of the core:
EnergySERIES = S2
x1x0.7LBASE xI2
SAT(BASE)
2
EnergyPARALLEL = P2
x1x0.7LBASE xI2
SAT(BASE)
For multiple windings, the energy capability varies as the square of
the number of windings. For example, six windings (either parallel
or series) can store 36 times more energy than one winding.
(9) Thermal Resistance is the approximate surface temperature rise
per Watt of heat loss under still-air conditions. Heat loss is a
combination of core loss and wire loss. The number assumes the
underlying PCB copper area equals 150% of the component area.
(10) These devices are designed for feed-forward applications, where
load current dominates magnitizing current.
2
VERSA-PAC temperature rise depends on total power losses and
size. Any other PCM configurations other than those suggested
could run hotter than acceptable.
Certain topologies or applications must be analyzed for needed
requirements and matched with the best VERSA-PAC size and
configuration. Proper consideration must be used with all
parameters, especially those associated with current rating, energy
storage, or maximum volt-seconds.
VERSA-PAC should not be used in off-line or safety related
applications. The breakdown voltage from one winding to any other
winding is 500 VAC maximum.
Product specifications- notes
Dimensions- mm
VP1 and VPH1
TOP VIEW
WHITE DOT
PIN #1
D
(12 PLCS)
LOGO (OPTIONAL)
B
C
A
12
7
6
1
FRONT VIEW
I
(12 PLCS) HG
(2 PLCS)
WWLLYY R
E
F
VPH
_
-
____
RECOMMENDED PCB LAYOUT
J
N
M
COMPONENT
SIDE
112
67
L
(12PLCS)
K
(12PLCS) 0
(10PLCS)
P
(10PLCS)
4
1
5
2
68
12
7
11
10
9
31:1:1:1:1:1
AAAB EFGH I JKLMNOP
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
max ref max ref ref max ref ref ref ref ref max
VP1 and VPH1 12.9 9.2 13.0 0.7 5.9 6.2 1.5 0.1 0.25 11.5 1.5 2.25 9.7 14.2 2.0 0.5
NOTES:
1) Tolerances A - I are ± 0.25 mm unless specified
otherwise.
2) Tolerances J - P are +/- 0.1 mm unless specified
otherwise.
3) Marking:
a) Dot for pin #1 identification
b) VP(H)x-xxx (product code, size, 4 digit part
number per family table.)
c) Versa Pac Logo (optional)
d) wwllyy = (date code) R = (revision level)
4) All soldering surfaces must be coplanar within
0.102 mm.
5) Packaged in tape and reel 600 parts per reel
4
Dimensions- mm
Technical Data 4301
Effective August 2017
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
VP2 and VPH2
TOP VIEW
WHITE DOT
PIN #1
D
(12 PLCS)
LOGO (OPTIONAL)
B
C
A
12
7
6
1
FRONT VIEW
I
(12 PLCS) HG
(2 PLCS)
WWLLYY R
E
F
VPH
_
-
____
RECOMMENDED PCB LAYOUT
J
N
M
COMPONENT
SIDE
112
67
L
(12PLCS)
K
(12PLCS) 0
(10PLCS)
P
(10PLCS)
4
1
5
2
68
12
7
11
10
9
31:1:1:1:1:1
A B C D E F G H IJKLMNOP
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
max ref max ref ref max ref ref ref ref ref max
VP2 and VPH2 16.3 12.0 16.8 0.7 6.7 7.8 2.0 0.1 0.30 14.25 1.75 2.5 13.0 18.0 2.5 0.75
VP3 and VPH3
A B DC EFGH I JKLMNO
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
max ref max ref max ref ref ref ref ref max
VP3 and VPH3 17.1 16.0 22.3 0.7 8.4 3.0 0.1 0.4 14.49 1.79 3.43 16.88 23.74 2.54 0.75
TOP VIEW
D
(12 PLCS)
1
6
12
7
LOGO
(OPTIONAL)
VPH
_
-
____
B
C
A
WHITE DOT
PIN #1
FRONT VIEW
H
(12 PLCS) G
(12 PLCS) F (2 PLCS)
E
1
12
2
11
3
1:1:1:1:1:1
4
9
5
8
6
J
(12PLCS)
COMPONENT
SIDE
K (12PLCS)
O
(10PLCS)
N
(10PLCS)
M
L
112
67
I
www.eaton.com/electronics
NOTES:
1) Tolerances A - I are ± 0.25 mm unless specified
otherwise.
2) Tolerances J - P are +/- 0.1 mm unless specified
otherwise.
3) Marking:
a) Dot for pin #1 identification
b) VP(H)x-xxx (product code, size, 4 digit part
number per family table.)
c) Versa Pac Logo (optional)
d) wwllyy = (date code) R = (revision level)
4) All soldering surfaces must be coplanar within
0.102 mm.
5) Packaged in tape and reel 300 parts per reel
107
NOTES:
1) Tolerances A - I are ± 0.25 mm unless specified
otherwise.
2) Tolerances J - P are +/- 0.1 mm unless specified
otherwise.
3) Marking:
a) Dot for pin #1 identification
b) VP(H)x-xxx (product code, size, 4 digit part
number per family table.)
c) Versa Pac Logo (optional)
d) wwllyy = (date code) R = (revision level)
4) All soldering surfaces must be coplanar within
0.102 mm.
5) Packaged in tape and reel 200 parts per reel
www.eaton.com/electronics
5
Dimensions- mm
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
Technical Data 4301
Effective August 2017
VP4 and VPH4
ACB DE F GH I J KLMNO
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
max ref max ref max ref ref ref ref ref max
VP4 and VPH4 18.0 18.0 24.6 0.7 10.0 3.3 0.1 0.4 14.25 1.75 3.43 19.14 26.0 2.5 0.75
TOP VIEW
D
(12 PLCS)
1
6
12
7
LOGO
(OPTIONAL)
VPH
_
-
____
B
C
A
WHITE DOT
PIN #1
FRONT VIEW
H
(12 PLCS) G
(12 PLCS) F (2 PLCS)
E
1
12
2
11
3
10
1:1:1:1:1:1
4
9
5
8
6
7
J
(12PLCS)
COMPONENT
SIDE
K (12PLCS)
O
(10PLCS)
N
(10PLCS)
M
L
112
67
I
VP5 and VPH5
ABCDEFGH I JKLMNO
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
max ref max ref max ref ref ref ref ref max
VP5 and VPH5 21.0 21.0 28.5 0.7 10.8 2.95 0.1 0.4 17.25 2.25 3.15 22.7 29.0 3.0 0.75
TOP VIEW
D
(12 PLCS)
1
6
12
7
LOGO
(OPTIONAL)
VPH
_
-
____
B
C
A
WHITE DOT
PIN #1
FRONT VIEW
H
(12 PLCS) G
(12 PLCS) F (2 PLCS)
E
1
12
2
11
3
10
1:1:1:1:1:1
4
9
5
8
6
7
J
(12PLCS)
COMPONENT
SIDE
K (12PLCS)
O
(10PLCS)
N
(10PLCS)
M
L
112
67
I
NOTES:
1) Tolerances A - I are ± 0.25 mm unless specified
otherwise.
2) Tolerances J - P are +/- 0.1 mm unless specified
otherwise.
3) Marking:
a) Dot for pin #1 identification
b) VP(H)x-xxx (product code, size, 4 digit part
number per family table.)
c) Versa Pac Logo (optional)
d) wwllyy = (date code) R = (revision level)
4) All soldering surfaces must be coplanar within
0.102 mm.
5) Bulk packaged
For tape and reel add TR to part number: (i.e.
VP4-0140TR-R) 140 parts per reel
NOTES:
1) Tolerances A - I are ± 0.25 mm unless specified
otherwise.
2) Tolerances J - P are +/- 0.1 mm unless specified
otherwise.
3) Marking:
a) Dot for pin #1 identification
b) VP(H)x-xxx (product code, size, 4 digit part
number per family table.)
c) Versa Pac Logo (optional)
d) wwllyy = (date code) R = (revision level)
4) All soldering surfaces must be coplanar within
0.102 mm.
5) Bulk packaged
For tape and reel add TR to part number: (i.e.
VP5-0155TR-R) 115 parts per reel
6
Technical Data 4301
Effective August 2017
How to use multiple windings
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
LTOTAL = LBASE x S2
= 10 µH x 22
=40 µH
Where:
LBASE = Inductance of a single winding
P= Number of windings in parallel (use 1 with all windings in series)
S= Number of windings in series
IBASE = Maximum current rating of one winding
IMAX = IBASE x P
= 1 Amp x 1
=1Amp
LTOTAL = LBASE x S2
=10 µH x 12
=10 µH
IMAX =IBASE x P
=1Amp x 2
=2Amps
10µH
1 Amp
10µH
1 Amp
10µH
1 Amp
Series Connected (2 Windings) Parallel Connected (2 Windings)
10µH
1 Amp
Windings on the same magnetic core behave differently. Two windings in series result in four times the inductance of a
single winding. This is because the inductance varies proportionately to the square of the turns.
Paralleled VERSA-PAC windings result in no change to the net inductance because the total number of turns remains
unchanged; only the effective wire size becomes larger. Two parallel windings result in approximately twice the current
carrying capability of a single winding. The net inductance of a given PCM configuration is based on the number of
windings in series squared multiplied by the inductance of a single winding (LBASE). The current rating of a PCM configuration
is derived by multiplying the maximum current rating of one winding (IBASE)by the number of windings in parallel. Examples
of simple two-winding devices are shown below:
Discrete inductors combine like resistors, when connected in series or parallel. For example, inductors in series add and
inductors in parallel reduce in a way similar to Ohm’s Law.
LSeries = L1 + L2 + L3...Ln
LParallel =1/ [1/L1 + 1/L2 + 1/L3....1/Ln]
www.eaton.com/electronics
www.eaton.com/electronics
7
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
How to pin-configure VERSA-PAC®
Technical Data 4301
Effective August 2017
1
12
2
11
3
10
4
1
112
6
Component View
7
7
LTOTAL = 36 x LBASE
= 36 times the base
Inductance from Data Table.
9
5
8
6
7
PIN CONFIGURATIONS
(2,12)(3,11)(4,10)(5,9)(6,8)
Each VERSA-PAC can be configured in a variety of ways by simply connecting pins together on the Printed Circuit Board
(PCB). As shown below, the connections on the PCB are equal to the pin configuration statement shown at the bottom of the
schematic symbol. Connecting a number of windings in parallel will increase the current carrying capability, while connecting
in series will multiply the inductance. Each VERSA-PAC part can be configured in at least 6 combinations for inductor use or
configured in at least 15 turns ratios for transformer applications. The VERSA-PAC allows for at least 500 magnetic
configurations. The PCM configurations can either be created by the designer or simply chosen from the existing PCM
diagrams. The following inductor example shows 6 windings in series, which result in an inductance of 36 times the base
inductance and 1 times the base current.
INDUCTOR EXAMPLE
FOR SIZES VP3, VP4 AND VP5
The PCM configurations may be selected from the examples above or created by the designer. The printed circuit board
layout in each example illustrates the connections to obtain the desired inductance or turns ratio. The examples may be
used by the PCB designer to configure VERSA-PAC as desired.
To assist the designer, VERSA-PAC phasing, coupling and thermal issues have been considered in each of the PCM
configurations illustrated. Additionally, the inductance and current ratings, as a function of the respective base values are
shown in each PCM example.
It is important to carefully select the proper VERSA-PAC part in order to minimize the component size without exceeding
the RMS current capability or saturating the core. The Product specification table indicates maximum ratings.
Each VERSA-PAC may be used in at least 15 transformer applications. More than 375 transformer combinations may be
achieved using the available VERSA-PAC parts.
TRANSFORMER EXAMPLE
FOR SIZES VP3, VP4 AND VP5
1
12
2
11
3
10
4112
76
9
5
8
6
7
1
12
2
7
L
PRIMARY
=1xL
BASE
I
PRI
=1xI
BASE
I
SEC
=1xI
BASE
1:5
PIN CONFIGURATIONS
(3,11)(4,10)(5,9)(6,8)
8
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
5V to 3.3V Buck Converter With 5V Output
This circuit minimizes both board space and cost by eliminating a
second regulator.VERSA-PACsgap serves to prevent core
saturation during the switch on-time and also stores energy for the
+5V load which is delivered during the flybackinterval. The +3.3V
buck winding is configured by placing two windings in series while
the +5V is generated by an additional flyback winding stacked on
the 3.3V output. Extra windings are paralleled with primary
windings to handle more current. The turns ratio of 2:1 adds 1.67V
to the +3.3V during the flyback interval to achieve +5V.
+3.3V@ 
12.5A
+V
RTN
VERSA-PAC
VP5-0083
12
11
10
9
8
7
1
2
3
4
5
6
Synchronous
Controller
IC
+
V+
+5V@
1A
+3.3V@ 
4.2A
+
RTN
VERSA-PAC
VP5-0083
LEVEL SHIFT
12,11
1,2
7
6
10,9,8
3,4,5
Synchronous
Controller
IC
+
3.3V Buck Converter
This circuit utilizes the gap of the VP5-0083 to handle the 12.5
Amp output current without saturating. In each of the five VERSA-
PAC sizes, the gap is varied to achieve a selection of specific
inductance and current values (see VERSA-PAC Data Table).
All six windings are connected in parallel to minimizeAC/DC
copper losses and to maximize heat dissipation. With VERSA-
PAC, this circuit works well at or above 300 KHz. Also, the closed
flux-path EFD geometryenables much lower radiation
characteristics than open-path bobbin core style components.
LITHIUM-ION BATTERY TO 3.3V SEPIC CONVERTER
The voltage of a Lithium-Ion Battery varies above and below
+3.3V depending on the degree of charge. The SEPIC
configuration takes advantage of VERSA-PAC’s multiple tightly
coupled windings. This results in lower ripple current which lowers
noise and core losses substantially. The circuit does not require a
snubber to control the voltage “spike” associated with switch turn-
off,and is quite efficient due to lower RMS current in the windings.
+3.3V@ 
6A
VERSA-PAC
VP5-0083
12 11 10
123 987
45
+
+
+
6
Controller
IC
W/Integral
Switch
Watts
100
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
200 300 400 500
VP 5
VP 4
VP 3
VP 2
VP 1
Watts
Frequency, kHz
100
0.0
5.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
200 300 400 500
VP 5
VP 4
VP 3
VP 2
Bipolar (Push-Pull) Power vs Frequency
Frequency, kHz
Unipolar (Flyback) Power vs Frequency
Technical Data 4301
Effective August 2017
VERSA-PAC® Performance characteristics
VP 1
OCL vs. Isat
100.0%
90.0%
80.0%
70.0%
60.0%
50.0%
40.0%
30.0%
20.0%
10.0%
0.0%
0.0% 20.0% 40.0% 60.0% 80.0% 100.0% 120.0% 140.0% 160.0% 180.0% 200.0%
% of Isat
% of OCL
These curves represent typical power handling capability.
Indicated power levels may not be achievable with all configurations.
Inductance characteristics
www.eaton.com/electronics
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/electronics
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. 4301
August 2017
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Solder Reflow Profile
Temperature
t
tP
ts
TC -5°C
Time 25°C to Peak Time
25°C
Tsmin
Tsmax
TL
TP
Preheat
A
Max. Ramp Up Rate = 3°C/s
Max. Ramp Down Rate = 6°C/s
T
Ta
ab
bl
le
e
1
1
-
-
S
St
ta
an
nd
da
ar
rd
d
S
Sn
nP
Pb
b
S
So
ol
ld
de
er
r
(
(T
Tc
c)
)
VolumeVolume
Package mm3mm3
Thickness <350 _
>350
<2.5mm 235°C220°C
_
>2.5mm 220°C220°C
T
Ta
ab
bl
le
e
2
2
-
-
L
Le
ea
ad
d
(
(P
Pb
b)
)
F
Fr
re
ee
e
S
So
ol
ld
de
er
r
(
(T
Tc
c)
)
Volume Volume Volume
Package mm3mm3mm3
Thickness <350 35035350 - >2000
<1.6mm 26C26C26C
1.6 – 2.5mm 26C250°C245°C
>2.5mm 250°C245°C245°C
Reference JDEC J-STD-020
Standard SnPb Solder Lead (Pb) Free SolderProfile Feature
Preheat and Soak•eTmperature min. (Tsmin) 100°C150°C
Temperature max. (Tsmax) 150°C200°C
Time (Tsmin to Tsmax) (ts)60-120 Seconds60-120 Seconds
C/ Second Max. C/ Second Max.
183°C217°C
60-150 Seconds60-150 Seconds
Table 1 able 2T
20 Seconds** 30 Seconds**
6°C/ Second Max. 6°C/ Second Max.
Average ramp up rate Tsmaxto Tp
Liquidous temperature (T
L
)
Time at liquidous (tL)
Peak package body temperature (TP)*
Time (tp)** within 5 °C of the specified classification temperature (Tc)
Average ramp-down rate (Tpto Tsmax)
Time 25°C to Peak Temperature Minutes Max.68 Minutes Max.
*Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Technical Data 4301
Effective August 2017
VP
VERSA-PAC® Inductors and Transformers (Surface Mount)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Eaton:
VPH1-0059-R VPH1-0076-R VPH1-0102-R VPH1-0190-R VPH1-1400-R VPH2-0066-R VPH2-0083-R VPH2-
0116-R VPH2-0216-R VPH2-1600-R VPH3-0047-R VPH3-0055-R VPH3-0084-R VPH3-0138-R VPH3-0780-R
VPH4-0047-R VPH4-0047TR-R VPH4-0060-R VPH4-0060TR-R VPH4-0075-R VPH4-0075TR-R VPH4-0140-R
VPH4-0140TR-R VPH4-0860-R VPH4-0860TR-R VPH5-0053-R VPH5-0053TR-R VPH5-0067-R VPH5-0067TR-R
VPH5-0083-R VPH5-0083TR-R VPH5-0155-R VPH5-0155TR-R VPH5-1200-R VPH5-1200TR-R VP1-0059-R VP1-
0076-R VP1-0102-R VP1-0190-R VP1-1400-R VP2-0066-R VP2-0083-R VP2-0116-R VP2-0216-R VP2-1600-R
VP3-0047-R VP3-0055-R VP3-0084-R VP3-0138-R VP3-0780-R VP4-0047-R VP4-0047TR-R VP4-0060-R VP4-
0060TR-R VP4-0075-R VP4-0075TR-R VP4-0140-R VP4-0140TR-R VP4-0860-R VP4-0860TR-R VP5-0053-R
VP5-0053TR-R VP5-0067-R VP5-0067TR-R VP5-0083-R VP5-0083TR-R VP5-0155-R VP5-0155TR-R VP5-1200-
R VP5-1200TR-R