General Description
The MAX6832–MAX6840 are microprocessor (µP)
supervisory circuits used to monitor low-voltage power
supplies in µP and digital systems. They provide excel-
lent circuit reliability and low cost by eliminating exter-
nal components and adjustments when used with
+1.2V to +1.8V powered circuits.
These devices assert a reset signal whenever the VCC
supply voltage declines below a preset threshold or
whenever manual reset (MR) is asserted. Reset remains
asserted for a fixed timeout delay after VCC has risen
above the reset threshold or when manual reset is
deasserted. Five different timeout periods are available:
70µs (voltage detector), 1.5ms, 30ms, 210ms, and 1.68s.
Reset thresholds suitable for operation with a variety of
supply voltages are available.
The MAX6832/MAX6835/MAX6838 have a push-pull
active-low reset output (RESET). The MAX6833/
MAX6836/MAX6839 have a push-pull active-high reset
output (RESET) and the MAX6834/MAX6837/MAX6840
have an open-drain active-low reset output (RESET). The
open-drain active-low reset output requires a pullup resis-
tor that can be connected to a voltage higher than VCC.
The MAX6835/MAX6836/MAX6837 feature a debounced
manual reset input (MR), while the MAX6838/MAX6839/
MAX6840 provide a RESET-IN input allowing the user to
externally adjust the reset threshold. The reset compara-
tor is designed to ignore fast transients on VCC.
Low supply current of 7.5µA makes the MAX6832–
MAX6840 ideal for use in portable equipment. These
devices are available in 3- and 4-pin SC70 packages.
Applications
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable/Battery-Powered Equipment
Features
Factory-Set Reset Threshold Voltages for
Nominal Supplies from 1.2V to 1.8V
Low Power Consumption: 7.5µA (typ)
Space-Saving 3- and 4-Pin SC70 Packages
±2.5% Reset Threshold Accuracy Over
Temperature
Five Different Timeout Periods Available: 70µs
(voltage detector), 1.5ms, 30ms, 210ms, and 1.68s
Three Reset Output Configurations
Push-Pull RESET
Push-Pull RESET
Open-Drain RESET
Guaranteed Reset Valid to VCC =
0.55V—Active-Low
0.75V—Active-High
Adjustable Threshold Reset-In Option
Manual Reset Input Option
Immune to Short Negative VCC Transients
Pin Compatible with MAX803/MAX809/MAX810,
MAX6711/MAX6712/MAX6713, and
MAX6381–MAX6390 Series
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
19-2242; Rev 2; 12/05
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Pin Configurations, Typical Operating Circuit, and Selector
Guide appear at end of data sheet.
PART TEMP RANGE PIN-PACKAGE
MAX6832_XRD_-T
-40°C to +85°C3 SC70-3
MAX6833_XRD_-T
-40°C to +85°C3 SC70-3
MAX6834_XRD_-T
-40°C to +85°C3 SC70-3
MAX6835_XSD_-T
-40°C to +85°C4 SC70-4
MAX6836_XSD_-T
-40°C to +85°C4 SC70-4
MAX6837_XSD_-T
-40°C to +85°C4 SC70-4
MAX6838XSD_-T -40°C to +85°C4 SC70-4
MAX6839XSD_-T -40°C to +85°C4 SC70-4
MAX6840XSD_-T -40°C to +85°C4 SC70-4
Insert the desired suffix letter from the Threshold Suffix Guide
(MAX6832–MAX6837) and the Active Timeout Period Guide
tables into the blanks to complete the part number. Sample
stock is generally available on standard versions only (see
Standard Versions table). Standard versions require a minimum
order increment of 2.5k units. Nonstandard versions must be
ordered in 10k unit increments. Contact factory for availability.
All parts are offered in tape-and-reel only.
Devices are available in both leaded and lead-free packaging.
Specify lead-free by replacing “-T” with “+T” when ordering.
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
2_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VCC = +0.55V to +3.6V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Terminal Voltage (with respect to GND)
VCC ........................................................................-0.3V to +6.0V
Open-Drain RESET, MR .......................................-0.3V to +6.0V
RESET-IN, Push-Pull RESET
and RESET ..............................................-0.3V to (VCC + 0.3V)
Input/Output Current (all pins) ............................................20mA
Continous Power Dissipation (TA= +70°C)
3-Pin SC70 (derate 2.9mW/°C above +70°C)...............235mW
4-Pin SC70 (derate 3.1mW/°C above +70°C)...............245mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
TA = -40°C to +85°C
MAX6832/MAX6835/MAX6838
MAX6834/MAX6837/MAX6840
0.55
3.6
TA = -40°C to +85°C
MAX6833/MAX6836/MAX6839
0.85
3.6
Supply Voltage Range VCC
TA = 0°C to +85°C
MAX6833/MAX6836/MAX6839
0.75
3.6
V
VCC = 1.2V, no load, reset not asserted 7.5 13
VCC = 1.8V, no load, reset not asserted 9 16
Supply Current ICC
VCC = 3.6V, no load, reset not asserted 16 25
µA
W
1.620 1.665 1.710
V
1.530 1.575 1.620
I
1.350 1.388 1.425
H
1.275 1.313 1.350
G
1.080 1.110 1.140
Reset Threshold VTH
F (Note 2)
1.020 1.050 1.080
V
1.1V VCC 3.3V, 0°C to +85°C
-2.5% 444 +2.5%
RESET-IN Threshold
VRSTIN
1.1V VCC 3.3V, -40°C to +85°C
-3.0% 444 +3.0%
mV
RESET-IN Leakage Current
IRSTIN
-25
+25
nA
Reset Threshold Hysteresis VHYS
0.75
VCC or RESET-IN to Reset Delay
VCC falling, step signal from
(VTH + 100mV) to (VTH - 100mV) 60 µs
D0 0.07
D1 1 1.5 2
D2 20 30 40
D3
140 210 280
Reset Active Timeout Period tRP
D4
1120
1680
2240
ms
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(VCC = +0.55V to +3.6V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Propagation Delay (D0 only) tPVCC rising, step signal
from (VTH - 100mV) to (VTH + 100mV) 70 µs
Startup Time (D0 only) VCC rising from 0 to 1.1V (tR < 1µs)
150
µs
VIL
0.3 x VCC
MR Input Voltage VIH 0.7 x VCC
V
MR Minimum Input Pulse Width MR driven from VCC to 0 2 µs
MR Glitch Rejection MR driven from VCC to 0
100
ns
MR to Reset Delay MR driven from VCC to 0
500
ns
MR Pullup Resistance To VCC 14 20 26 k
VCC 0.55V, ISINK =15µA, reset asserted
0.15
VCC 1.0V, ISINK = 80µA, reset asserted
0.15
Open-Drain RESET Output
Voltage VOL
VCC 1.5V, ISINK = 200µA, reset asserted 0.2
V
Open-Drain RESET Output
Leakage Current ILKG VCC > VTH, reset not asserted 1.0 µA
VCC 0.55V, ISINK = 15µA, reset asserted
0.2 x VCC
VCC 1.0V, ISINK = 80µA, reset asserted
0.2 x VCC
VOL
VCC 1.5V, ISINK = 200µA, reset asserted
0.2 x VCC
VCC 1.1V, ISOURCE = 50µA, reset not
asserted 0.8 x VCC
Push-Pull RESET Output
Voltage
VOH
VCC 1.5V, ISOURCE = 150µA, reset asserted 0.8 x VCC
V
VCC 0.75V, ISOURCE = 10µA, reset asserted
(Note 2) 0.8 x VCC
VCC 0.85V, ISOURCE = 10µA, reset asserted
0.8 x VCC
VCC 1.0V, ISOURCE = 50µA, reset asserted
0.8 x VCC
VOH
VCC 1.5V, ISOURCE = 150µA, reset asserted
0.8 x VCC
VCC 1.1V, ISINK = 80µA, reset not asserted 0.2 x VCC
Push-Pull RESET Output
Voltage
VOL
VCC 1.5V, ISINK = 200µA, reset not asserted 0.2 x VCC
V
Note 1: 100% production tested at +25°C. Over temperature limits are guaranteed by design.
Note 2: Temperature range is from 0°C to +85°C.
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
4_______________________________________________________________________________________
Typical Operating Characteristics
(VCC = full range and TA= -40°C to +85°C, unless otherwise noted. Typical values are at TA= +25°C).
SUPPLY CURRENT vs. TEMPERATURE
MAX6832-40 toc01
0
2
6
4
12
14
10
8
16
SUPPLY CURRENT (µA)
-40 0 20-20 40 60 80
TEMPERATURE (°C)
VCC = 3.6V
VCC = 3.0V
VCC = 2.5V
VCC = 1.8V
VCC = 1.5V
VCC = 0.55V
0
100
50
200
150
250
300
-40 20 40-20 0 60 80
POWER-DOWN RESET DELAY
vs. TEMPERATURE
MAX6832-40 toc02
TEMPERATURE (°C)
POWER-DOWN RESET DELAY (µs)
VOD = OVERDRIVE (mV)
VOD = 10mV
VOD = 20mV
VOD = 100mV
VOD = 200mV
0.994
0.996
0.995
0.999
0.998
0.997
1.002
1.001
1.000
1.003
-40 0-20 20 40 60 80
NORMALIZED RESET THRESHOLD
vs. TEMPERATURE
MAX6832-40 toc04
TEMPERATURE (°C)
NORMALIZED RESET THRESHOLD
VTH = 1.665V
0.94
0.98
0.96
1.02
1.00
1.04
1.06
-40 20 40-20 0 60 80
NORMALIZED POWER-UP RESET
TIMEOUT vs. TEMPERATURE
MAX6832-40 toc03
TEMPERATURE (°C)
NORMALIZED RESET TIMEOUT PERIOD
D1 OPTION
D2 OPTION
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
_______________________________________________________________________________________ 5
Pin Description—MAX6832–MAX6837
PIN
MAX6833
SC70-3
MAX6832/
MAX6834
SC70-3
MAX6836
SC70-4
MAX6835/
MAX6837
SC70-4
NAME FUNCTION
1111GND Ground
—2—2RESET
Reset Output, Open-Drain or Push-Pull, Active-Low. RESET
changes from HIGH to LOW when VCC drops below the
selected reset threshold or MR is pulled low. RESET remains
LOW for the reset timeout period after VCC exceeds the device
reset threshold and MR is released high.
2—2—RESET
Reset Output, Push-Pull, Active-High. RESET changes from
LOW to HIGH when the VCC input drops below the selected
reset threshold or MR is pulled low. RESET remains HIGH for
the reset timeout period after VCC exceeds the device reset
threshold and MR is released high.
—— 3 3MR
Active-Low Manual Reset Input. Internal 20k pullup to VCC.
Pull LOW to force a reset. Reset remains active as long as MR is
LOW and for the reset timeout period after MR goes HIGH.
Leave unconnected or connect to VCC if unused.
3344V
CC Supply Voltage and Monitored Supply
Pin Description—MAX6838/MAX6839/MAX6840
PIN
MAX6839
SC70-4
MAX6838/
MAX6840
SC70-4
NAME FUNCTION
11
RESET-IN
Adjustable Reset Threshold Input. High-impedance input for reset comparator. Connect
this pin to an external resistive-divider network to set the reset threshold voltage; the
typical threshold is 444mV. Reset is asserted when RESET-IN is below the threshold (VCC
is not monitored).
22V
CC Supply Voltage (1.1V to 3.3V)
33GND Ground
4—RESET
Reset Output, Push-Pull, Active-High. RESET changes from LOW to HIGH when the
RESET-IN input drops below the typical reset threshold (444mV). RESET remains HIGH for
the reset timeout period after RESET-IN exceeds the reset threshold.
—4RESET
Reset Output, Open-Drain or Push-Pull, Active-Low. RESET changes from HIGH to LOW
when RESET-IN drops below the typical reset threshold (444mV). RESET remains LOW for
the reset timeout period after RESET-IN exceeds the reset threshold.
MAX6832–MAX6840
Detailed Description
Reset Output
A microprocessor’s (µP’s) reset input starts the µP in a
known state. The MAX6832–MAX6840 assert a reset to
prevent code-execution errors during power-up, power-
down, or brownout conditions. They also assert a reset
signal whenever the VCC supply voltage falls below a
preset threshold (MAX6832–MAX6837) or RESET-IN
falls below the adjustable threshold (MAX6838/
MAX6839/MAX6840), keeping reset asserted for a fixed
timeout delay (Table 2) after VCC or RESET-IN has risen
above the reset threshold. The MAX6832/MAX6835/
MAX6838 use a push-pull active-low output, the
MAX6833/MAX6836/MAX6839 have a push-pull active-
high output, and the MAX6834/MAX6837/MAX6840
have an open-drain active-low output stage. Connect a
pullup resistor on the MAX6834/MAX6837/MAX6840’s
RESET output to any supply between 0 and 6V.
Manual Reset Input
Many µP-based systems require manual reset capabili-
ty, allowing the operator, a test technician, or external
logic circuitry to initiate a reset. Reset remains asserted
while MR is low, and for a fixed timeout delay after MR
returns high. This input has an internal 20kpullup
resistor, so it can be left open if it is not used. MR can
be driven with CMOS logic level, or with open-drain/col-
lector outputs. To create a manual reset function, con-
nect a normally open momentary switch from MR to
ground; external debounce circuitry is not required. If
MR is driven from long cables or if the device is used in
a noisy environment, connecting a 0.1µF capacitor from
MR to ground provides additional noise immunity.
RESET-IN Information
The MAX6838/MAX6839/MAX6840 feature a RESET-IN
input for monitoring supply voltages down to 0.44V. An
external resistive-divider network can be used to set
voltage monitoring thresholds as shown in Figure 1. As
the monitored voltage falls, the voltage at RESET-IN
decreases and asserts a reset when it falls below the
RESET-IN threshold (VRSTIN). The low-leakage current
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
6_______________________________________________________________________________________
MAX6838/
MAX6839/
MAX6840
RESET
TIMEOUT
PERIOD
RESET
OUTPUT
VREF = 444mV
RESET-IN
RESET/
RESET
GND
VCC
VCC
MAX6832–
MAX6837
RESET
TIMEOUT
PERIOD
MANUAL
RESET
DETECT
RESET
OUTPUT
VREF = 444mV
RESET/
RESET
GND
MR (MAX6835/MAX6836/MAX6837 ONLY)
MR
PULLUP
Functional Diagrams
VMONITORED
R1
R2
RESET-IN
GND
RESET
(RESET)
VCC
( ) ARE FOR MAX6839
MAX6838/
MAX6839/
MAX6840
R1 = R2 [(VMONITORED/VREF) -1]
WHERE VMONITORED IS THE DESIRED TRIP LEVEL,
VREF = 444mV
Figure 1. Setting the Adjustable Threshold Externally
at RESET-IN allows for relatively large-value resistors to
be used, which reduce power consumption. For exam-
ple, for a 0.6V monitored trip level, if R2 = 200k, then
R1 = 70.3k. Note that the minimum VCC of 1.1V is
required to guarantee the RESET-IN threshold accura-
cy (see Electrical Characteristics table).
Applications Information
Negative-Going VCC Transients
In addition to issuing a reset to the µP during power-up,
power-down, and brownout conditions, the MAX6832–
MAX6840 are relatively immune to short-duration nega-
tive-going VCC transients (glitches).
Figure 2 shows typical transient duration vs. reset com-
parator overdrive, for which the MAX6832–MAX6840 do
not generate a reset pulse. The graph was generated
using a negative-going pulse applied to VCC, starting
0.1V above the actual reset threshold and ending
below it by the magnitude indicated (reset comparator
overdrive). The graph indicates the maximum pulse
width a negative-going VCC transient can have without
causing a reset pulse. As the magnitude of the tran-
sient increases (goes farther below the reset threshold),
the maximum allowable pulse width decreases. A 0.1µF
bypass capacitor mounted as close as possible to the
VCC pin provides additional transient immunity.
Ensuring a Valid Reset Output
Down to VCC = 0
When VCC falls below 0.55V, the MAX6832/MAX6835/
MAX6838 push-pull RESET output no longer sinks cur-
rent—it becomes an open circuit. Therefore, high-
impedance CMOS logic inputs connected to RESET
can drift to undetermined voltages. This presents no
problem in most applications since most µP and other
circuitry are inoperative with VCC lower than 0.55V.
However, in applications where RESET must be valid
down to 0, adding a pulldown resistor to RESET causes
any stray leakage currents to flow to ground, holding
RESET low (Figure 3). R3’s value is not critical; 100k
is large enough not to load RESET and small enough to
pull RESET to ground.
A 100kpullup resistor to VCC is also recommended
for the MAX6833/MAX6836/MAX6839 if RESET is
required to remain valid for VCC < 0.85V.
Interfacing to µPs with Bidirectional
Reset Pins
Since the RESET output on the MAX6834/MAX6837/
MAX6840 is open-drain, these devices interface easily
with µPs that have bidirectional reset pins. Connecting
the µP supervisor’s RESET output directly to the µP’s
RESET pin with a single pullup resistor allows either
device to assert a reset (Figure 4).
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
_______________________________________________________________________________________ 7
0
200
300
400
500
600
700
800
900
110100
MAXIMUM TRANSIENT DURATION
vs. OVERDRIVE
OVERDRIVE VTH - VCC (mV)
MAXIMUM TRANSIENT DURATION (µs)
100
RESET OCCURS
ABOVE THIS
LINE
Figure 2. Maximum Transient Duration Without Causing a
Reset Pulse vs. Reset Comparator Overdrive
R3
100k
VCC
GND
MAX6832
MAX6835
MAX6838
RESET
Figure 3.
RESET
Valid to VCC = Ground Circuit
RESET
GND
RESET
INPUT
MAX6834
MAX6837
MAX6840
BIDIRECTIONAL
µP
GND
VCC
VCC
VCC
Figure 4. Interfacing to µPs with Bidirectional Reset I/O
MAX6832–MAX6840
Using The MAX6834/MAX6837/MAX6840
Open-Drain
RESET
Output
with Multiple Supplies
Generally, the pullup connected to the MAX6834/
MAX6837/MAX6840 will connect to the supply voltage
that is being monitored at the IC’s VCC pin. However,
some systems may use the open-drain output to level-
shift from the monitored supply to reset circuitry pow-
ered by some other supply (Figure 5). Note that as the
MAX6834/MAX6837/MAX6840’s VCC decreases, so
does the IC’s ability to sink current at RESET. Also, with
any pullup, RESET will be pulled high as VCC declines
toward 0. The voltage where this occurs depends on
the pullup resistor value and the voltage to which it is
connected.
Chip Information
TRANSISTOR COUNT: 681
PROCESS: BiCMOS
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
8_______________________________________________________________________________________
RESET
GND
RESET
INPUT
RPULLUP
MAX6834
MAX6837
MAX6840
5V SYSTEM
GND
VCC
+1.2V +5.0V
VCC
Figure 5. Using The MAX6834/MAX6837/MAX6840 Open-Drain
RESET
Output with Multiple Supplies
Table 2. Active Timeout Period Guide
SUFFIX TYPICAL RESET ACTIVE
TIMEOUT PERIOD (ms)
D0 0.07
D1 1.5
D2 30
D3 210
D4 1680
Table 3. Standard Versions
DEVICE TOP MARK
MAX6832VXRD0 AIQ
MAX6832VXRD3 AIR
MAX6832HXRD0 AIS
MAX6832HXRD3 AIT
MAX6832FXRD0 AIU
MAX6832FXRD3 AIV
MAX6833VXRD0 AHJ
MAX6833VXRD3 AIW
MAX6833HXRD0 AIX
MAX6833HXRD3 AIY
MAX6833FXRD0 AIZ
MAX6833FXRD3 AJA
MAX6834VXRD0 AJB
MAX6834VXRD3 AJC
MAX6834HXRD0 AJD
MAX6834HXRD3 AJE
MAX6834FXRD0 AJF
MAX6834FXRD3 AJG
MAX6835VXSD0 AEX
Table 1. Threshold Suffix Guide
Selector Guide
SUFFIX RESET THRESHOLD (V)
W1.665
V1.575
I1.388
H1.313
G1.110
F1.050
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
_______________________________________________________________________________________ 9
DC/DC
CONVERTER
RESET
GND
RESET
CORE
SUPPLY
I/O
SUPPLY
VIN
3.3V 1.2V
VCC
MAX6834G/F GND
µP
Typical Operating Circuit
1
2
3VCC
RESET (RESET)
GND
MAX6832
MAX6833
MAX6834
SC70-3
TOP VIEW
1
2
4VCC
RESET (RESET)
GND
MAX6835
MAX6836
MAX6837
SC70-4
3MR
1
2
4
VCC
RESET (RESET)
RESET-IN
MAX6838
MAX6839
MAX6840
SC70-4
3GND
( ) ARE FOR MAX6839
( ) ARE FOR MAX6836
( ) ARE FOR MAX6833
Pin Configurations
Table 3. Standard Versions (continued)
DEVICE TOP MARK
MAX6835VXSD3 AFF
MAX6835HXSD0 AFG
MAX6835HXSD3 AFH
MAX6835FXSD0 AFI
MAX6835FXSD3 AFJ
MAX6836VXSD0 AFK
MAX6836VXSD3 AFL
MAX6836HXSD0 AFM
MAX6836HXSD3 AFN
MAX6836FXSD0 AFO
MAX6836FXSD3 AFP
MAX6837VXSD0 AFQ
MAX6837VXSD3 AFR
MAX6837HXSD0 AFS
MAX6837HXSD3 AFT
MAX6837FXSD0 AFU
MAX6837FXSD3 AFC
MAX6838XSD0 AFW
MAX6838XSD3 AFV
MAX6839XSD0 AFX
MAX6839XSD3 AEZ
MAX6840XSD0 AFY
MAX6840XSD3 AFZ
Selector Guide (continued)
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
10 ______________________________________________________________________________________
SC70, 3L.EPS
PACKAGE OUTLINE, 3L SC70
21-0075
1
1
C
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
MAX6832–MAX6840
Ultra-Low-Voltage SC70 Voltage Detectors
and µP Reset Circuits
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
©2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products, Inc.
SC70, 4L.EPS
PACKAGE OUTLINE, 4L SC70
21-0098
1
1
C
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)