FZ-Lite VISION SENSOR Easy inspection beyond expectation Intuitive user guidance Crystal-clear imaging Flexible Vision platform 2 Simple, flexible & crystal clear The new FZ-Lite integrates the benefits of a Smart Camera and a powerful Vision System in a single platform. The unique image clarity achieved by using an intelligent camera enables simple setup, fast installation and enhanced optical performance. Features * Crystal-clear image quality * Real Color Processing (16 million colors) * C-mount and Smart Cameras * EtherNet/IP & TCP/IP communication Benefits * Simple and guided set-up * Reliable results on any surface * One platform for any application In combination with the powerful FZ-Lite controller it takes you into a new dimension of image processing. Highest performance, simplicity and unique flexibility are defining a new standard for Compact Vision Sensors. Intelligent Compact Camera Camerra Lite Controller Con ntroller Monitor 3 Simple Operation FZ-Lite supports the Smart Camera technology from the FQ-series Sensors. This allows fast and easy installation of the camera on the machine, without further optics and illumination. Crystal Clear images can be easily captured using High-power Lighting and a Polarizing Filter that eliminates glare. Flexible Flow configuration More than 20 processing items are provided by FZ-Lite, such as dimension measurements, various search items (pattern, contour), defects, edge and count tools. These processing items, can be combined in a flow program, offering branches or loops. This offers a new dimension of flexibility for Compact Vision Sensors. Open Network EtherNet/IP, a global standard for factory automation data networking, is supported for seamless integration into a production line or machine. This allows users to easily connect to any EtherNet/IP enabled devices from any manufacturer. Further communication is possible via TCP/IP, serial and parallel interfaces. 4 A new benchmark in image clarity Simple Operation Achieving sharp and crystal clear images that improve inspection performance has never been so easy. The FZ-Lite features powerful functions, to eliminate the effects of direct reflections, environmental light interference and big variations in brightness. These cutting edge functions shorten and simplify the installation and setup procedure. Simply don't care anymore about how to install the camera in the best way, to get a sharp image. Typical Problem Camera with integrated High-power Lighting The Camera utilizes integrated High-power Lighting that enables uniform illumination in the field of view. Utilizing a new optical design, bright and clear images can be achieved without additional lighting. A Polarizing Filter can be used to cut direct light reflections to eliminate the common issue of glare resulting from highly reflective surfaces. HDR Sensing A high dynamic range (HDR) function is provided to eliminate the influence of objects with irregular reflectance and changes in external light conditions. By increasing the high dynamic range by a factor of up to 5,000, objects that previously could not be detected due to inconsistent lighting or halation can be clearly inspected. Real Color Sensing Uniform Brightness Underexposure HDR Image Halation Monochrome Real Color Color sensing is standard for OMRON Vision Sensors. Real color processing enables stable detection of minute color differences, which is difficult to perform using color gray processing or filtering. It is not necessary to perform color extraction or redo the setup every time the workpiece color changes. 2 Million Pixel Camera Inspections that require high resolution can be solved with the 2 Million Pixel Camera. Presence and dimension inspections can be realized. At a rate of 30 frames per second. The input speed is the highest in this class. The use of a C-mount Lens enables applications in any field of view. 2 Million Pixel 5 Powerful processing items for any inspection and industry Flexible Application Inspection and Measurement Items Measurements Dimension Measurements Workpiece Count Scan Edge Width Labeling Multiple measurements can be performed on the objects for their minimum width, maximum width, and average width. Enhanced performance is also provided to detect the depth of grooves on metal shafts. A cluster of objects is extracted as labels, and the parameters for area, center of gravity, and other factors are generated for output and further processing. Perform measurements for roundness, enclosing rectangles, and circumference measurement. Counting by sorting of the labels according to coordinates or size can also be performed. Appearance Inspections Inspection of Defects Defects Perform inspection of defects and dirt on solid-colored objects, component chips or burrs. Fine Matching Fine Matching is ideal when the background has a pattern. In Combination with the standard image it enables high-speed, high-precision inspection for minute dirt and edge chips. A: Standard work QTY:60 Materials Vitamin A Amount 10g Vitamin D Vitamin E 5g 10g TAKE ONE TABLET BY MOUTH TWICE DAILY Amount per Tablet CALCIUM IRON 100% 80% B: Different kind work QTY:60 TAKE ONE TABLET BY MOUTH TWICE DAILY Detection of Subtle Differences Sensitive Search Detailed matching is performed by automatically separating a registered image. Subtle differences that cannot be determined using normal searches are detected with good stability and correlation difference. So, there's no need for accurate threshold settings. Amount per Tablet CALCIUM IRON 100% 80% Character Inspections Inspection of Expiration Dates Prevention of False Rejections Date Verification Flexible Search By simply setting the period of production, the character string can be automatically verified and the printing can be easily validated. The printed expiration date is changed automatically every day. Inspection can be performed to accept items with variations in printing quality and shape, and to reject only those items that are obviously wrong. Registering multiple images of acceptable items as models enables stable searching regardless of the printing quality or changes in shape. 6 Choose the interface you need Open Network A variety of interfaces, such as EtherNet/IP, general-purpose Ethernet, and serial communications allows easy communication with a PLC or other external devices. EtherNet/IP Easier, Faster EtherNet/IP is a widely used communication protocol in factories around the world. You can easily connect to OMRON PLCs or any other vendor device that supports EtherNet/IP to enable high-speed communication. PLC Link Function Network Drive Function Easy Creation of Ladder Programs Network Logging A PLC Link function is included to reduce the effort in ladder programming for serial communications and standard Ethernet. The network drive function in FZ-Lite allows users to output and store images and measurement values to computers over a network, not limited to internal or only to USB memory. Connecting a large-capacity hard drive enables long-term image logging. It can also be used for storage of configuration data. Back-up and restore of any data over the network is also supported. Applicable PLCs OMRON CS, CJ, CP, and NSJ Series Mitsubishi Electric Q Series Computer Hard drive Network logging HUB Reading and writing I/O memory areas can be easily set on the special menu screen. Uploading and downloading scene data Controller 7 Ordering Information Controllers Appearance Type Model Two-camera controllers Lite Controllers Four-camera controllers Remarks NPN FZ3-L350 PNP FZ3-L355 ----- NPN FZ3-L350-10 --- PNP FZ3-L355-10 --- Model Remarks Cameras Appearance Type Wide View (Short-distance) @100mm Color Intelligent Compact Cameras FZ-SQ100N Wide View (Long-distance) @100mm Color FZ-SQ100F Standard @50mm Color FZ-SQ050F Narrow View @10mm Color FZ-SQ010F Wide field of vision Color FZ-SLC100 Camera + Zoom, Autofocus Lens + Intelligent Lighting Intelligent Cameras Narrow field of vision Color FZ-SLC15 Wide field of vision Color FZ-SZC100 Narrow field of vision Color FZ-SZC15 Color FZ-SC2M Monochrome FZ-S2M Color FZ-SC Monochrome FZ-S Color FZ-SFC Monochrome FZ-SF Color FZ-SPC Monochrome FZ-SP Color FZ-SHC Monochrome FZ-SH Camera + Zoom, Autofocus Lens Autofocus Cameras Digital Cameras Digital Cameras Small Digital Cameras Small Digital Cameras High-speed Cameras Camera +Lens + High-power Lighting 2 million pixels 300,000-pixels Lens required 300,000-pixel flat type 300,000-pixel pen type 300,000-pixels Cameras peripheral devices Appearance Type Model CCTV Lenses Remarks --- 3Z4S-LE Series Extension Tubes --- Low-distortion Lenses FZ-LEH5/LEH8/LEH12/LEH16/ LEH25/LEH35/LEH50/LEH75/ LEH100 Low distortion lens for 2-million Pixel Cameras Lenses for Small Camera FZ-LES3/LES6/LES16/LES30 Lens for 300,000-pixel Small Cameras Extension Tubes for Small Camera FZ-LESR Extension Tubes for 300,000-pixel Small Cameras Wide field of vision FZ-SLC100-DL --- Narrow field of vision FZ-SLC15-DL --- Intelligent Camera Diffusion Plate 8 Ordering Information Cables Appearance Type Cable length: Model Remarks Camera Cable 2m, 5m, 10m (See note 2) FZ-VS --- Bend resistant Camera Cables 2m, 5m, 10m (See note 3) FZ-VSB --- Right-angle Camera Cable (See note 1) 2m, 5m, 10m (See note 2) FZ-VSL --- Long-distance Camera Cable 15m (See note 4) FZ-VS2 --- Long-distance Right-angle Camera Cable 15m (See note 4) FZ-VSL2 --- Cable Extension Unit Maximum cable length: 45 m (Up to two Extension Units and three Cables can be connected.) FZ-VSJ --- Monitor Cable 2m, 5m FZ-VM --- 2m, 5m FZ-VP --- 2m, 5m, Connector-type FZ-VPX (See note 5) --- Parallel Cable Note: 1. 2. 3. 4. 5. This Cable has an L-shaped connector on the Camera end. The 10-m Cable cannot be used for the Intelligent Camera and Autofocus Camera. The 10-m Cable cannot be used for the Intelligent Camera, Autofocus Camera and 2 Million-pixel Camera. The 15-m Cable cannot be used for the Intelligent Camera and Autofocus Camera. Connector-Terminal Block Conversion Units can be connected (Recommended Products: OMRON XW2B-50G4/50G5, XE2D50G6). Peripheral devices Appearance Type LCD Monitor FZ-M08 USB Memory FZ-MEM1G Strobe Controller Strobe Controller ----- Model Mouse External Lighting For 3Z4S-LT Series Remarks --- Capacity: 1 GB One channel Manufactured by MORITEX Corporation 3Z4S-LT MLEK-C100E1TS2 One channel FZ-LTA100 Two channels FZ-LTA200 Required to control external lighting from a Controller For FZ-LT Series --- --- 3Z4S-LT Series --- FZ-LT Series --- 9 Ratings and Performance Lite Controller Model NPN FZ3-L350 PNP FZ3-L355 No. of Cameras Processing resolution 2 With Intelligent Compact Camera 752 (H) x 480 (V) When connected to a 300,000-pixel camera 640 (H) x 480 (V) When connected to a 2 million-pixel camera Processing Items Main functions 1600 (H) x 1200 (V) Inspections / Measurement Image Capturing Camera image Input, Camera Image Input HDR, Camera Image Input HDR Lite, Camera Switching, Measurement Image Switching Correcting images Position Compensation, Filtering, Backgrond Suppression, Color Gray Filter, Extract Color Filter, Anti Color Shading, Polar Transformation Assisting inspections / measurement Calculation, Line Regression, Circle Regression, Set Unit Data, Get Unit Data, Set Unit Figure, Get Unit Figure, Trend Monitor, Image Logging, Data Logging, Elapsed Time, Wait, Focus, Iris Branching processing Conditional Branch, End, DI Branch Outputting results Serial data output, Parallel data output, Parallel judgement output, Fieldbus data output Displaying results onthe monitor Result Display, Display Image File, Display Last NG Image Number of simultaneous inspections1 No limit to setting (as permitted by memory capacity) Position compensation Yes (flexible combination with processing items for inspections and measurements) With Intelligent Compact Camera When connected to a 300,000-pixel camera When connected to a 2 million-pixel camera I/O specifications FZ3-L355-10 4 Search, Flexible Search, Sensitive Search, ECM Search, Ec Circle Search, Classification, Edge Position, Edge Pitch, Scan Edge Position, Scan Edge Width, Color Data, Gravity and Area, Labeling, Label Data, Defect, Precise Defect, Fine Matching, Character Inspection, Date Verification, Model Dictionary, Circle Angle Number of registered scenes Number of logged images (See note 1.) FZ3-L350-10 32 Connected to 1 camera 214 Connected to 2 cameras 107 Connected to 3 cameras 71 Connected to 4 cameras 53 Connected to 1 camera Color Camera: 250, Monochrome Camera: 252 Connected to 2 cameras Color Camera: 125, Monochrome Camera: 126 Connected to 3 cameras Color Camera: 83, Monochrome Camera: 84 Connected to 4 cameras Color Camera: 62, Monochrome Camera: 63 Connected to 1 camera Color Camera: 40, Monochrome Camera: 40 Connected to 2 cameras Color Camera: 20, Monochrome Camera: 20 Connected to 3 cameras Color Camera: 13, Monochrome Camera: 13 Connected to 4 cameras Color Camera: 10, Monochrome Camera: 10 Serial communications RS-232C 1CH Network communications Ethernet 1000BASE-T/100BASE-TX/10BASE-T EtherNet/IP Ethernet port baud rate: 100 Mbps (100Base-TX) Parallel I/O 11 inputs (RESET, STEP, DSA, and DI 0 to 7), 26 outputs (RUN, BUSY, GATE, OR, READY, ERROR, STGOUT 0 to 3, and DO 0 to 15) Monitor interface Analog RGB video output, 1 channel (Resolution: XGA 1,024 x 768 dots) USB interface 2 channels (supports USB 1.1 and 2.0) Operation Mouse or similar device Settings Create series of processing steps by editing the flowchart (Help messages provided). Power supply voltage (See note 2.) 20.4 to 26.4 VDC With Intelligent Compact Camera Ratings Current consumption (See note 3.) (at 24.0 VDC) When connected to a intelligent or autofocus camera When connected to a 300,000-pixel camera When connected to a 2 millionpixel camera Environmental immunity 4.0 A max. 5.5 A max. 2.6 A max. 2.9 A max. Ambient temperature range Operating: 0 to 50 C, Storage: -25 to 65 C (with no icing or condensation) Ambient humidity range Operating and storage: 35% to 85% (with no condensation) Ambient atmosphere No corrosive gas Degree of protection IEC 60529 IP20 Materials Plating steel board Weight Approx. 1.8kg Accessories Instruction Manual Note: 1. The number of logged images will vary when connecting multiple Cameras with different models. 2. Do not ground the positive terminal of the 24-VDC power supply to the Lite Controller. If the positive terminal is grounded, electrical shock may occur when an SG (0-V) part, such as the case of the Controller or Camera, is touched. 3. The current consumption when the maximum number of Cameras supported by each Controller are connected. If a strobe Controller model is connected to a lamp, the current consumption is as high as when an Intelligent Camera is connected. 10 Ratings and Performance LCD Monitor Monitor Cable Model FZ-M08 Model FZ-VM Vibration resistiveness 10 to 150 Hz single amplitude 0.15 mm 3 directions, 8 strokes, 4 times Ambient temperature range Operation: 0 to +50 C, Storage: -20 to +65 C (with no icing or condensation) Ambient humidity range Operation and storage: 35% to 85%RH (with no condensation) Approx. 0.7 A max. Ambient atmosphere No corrosive gases Operating: 0 to 50 C, Storage: -25 to 65 C (with no icing or condensation) Material Cable sheath: heat-resistant PVC Connector: PVC Size 8.4 inches Type Liquid crystal color TFT Resolution 1,024x768 dots Input signal Analog RGB video input, 1 channel Power supply voltage 21.6 to 26.4 VDC Current consumption Ambient temperature range Ambient humidity range Operating and storage: 35% to 85% (with no condensation) Weight Approx. 1.2 kg Accessories Instruction Sheet and 4 mounting brackets Minimum bending radius 75 mm Weight approx.170 g Intelligent Compact Camera Model FZ-SQ010F Field of vision Installation distance Image input Lighting FZ-SQ050F FZ-SQ100F FZ-SQ100N 7.5x4.7 to 13x8.2 mm 13x8.2 to 53x33 mm 53x33 to 240x153 mm 29x18 to 300x191 mm 38 to 60 mm 56 to 215 mm 220 to 970 mm 32 to 380 mm Image processing method Real color Image elements 1/3-inch color CMOS Shutter 1/250 to 1/32258 Processing resolution 752 (H) x 480 (V) Partial function 8 to 752 lines Lighting method Pulse Lighting color White LED class Class 2 Ambient temperature range Operating: 0 to 50 C, Storage: -25 to 65 C (with no icing or condensation) Environmental immunity Ambient humidity range Operating and storage: 35% to 85% (with no condensation) Ambient atmosphere No corrosive gas Degree of protection IEC 60529 IP40 (with Polarizing Filter Attachment mounted.) Materials Camera: PBT, PC, SUS Mounting Bracket: PBT Polarizing Filter Attachment: PBT, PC Weight Approx. 160 g * * * * Accessories Approx. 150 g Mounting Bracket (FQ-XL) (1) Polarizing Filter Attachment (FQ-XF1) (1) Instruction Manual Member registration sheet System configuration Input device Mouse USB connection PC RS-232C Ethernet Analogue RGB RGB Monitor Parallel I/O PLC Camera connected Dimensions (Unit: mm) Controllers FZ3-L35@ FZ3-L35@-10 12 197 80 182.3 The 2-camera type has only two camera connectors on its left side. Intelligent Compact Camera Narrow View and Standard Wide View FZ-SQ010F FZ-SQ050F FZ-SQ100F (Long-distance) FZ-SQ100N (Short-distance) 44 1 46 (94.8) 20 9 3 (49) 8 20 Mounting Hole Dimensions Note. The Mounting Bracket can be mounted to either side. Mounting Hole Dimensions 200.1 s ole o, Tw dia. h 4.5 1/4-20UNC Depth: 6 Four-M4 Depth: 6 s ole o, Tw dia. h 4.5 Tightening torque: 1.2 N.m 200.1 20 (4.8) 8 32 20 1/4-20UNC Depth: 6 Four-M4 Depth: 6 9 (57) (4.8) 11 Mounting Bracket (See Note.) Polarizing Filter Attachment 67 (94.8) 32 Polarizing Filter Attachment 44 45 Mounting Bracket (See Note.) 45 67 Optical axis 1 46 Optical axis Tightening torque: 1.2 N.m Note. The Mounting Bracket can be mounted to either side. LCD Monitor FZ-M08 Mountable plate thickness: 1.6 to 5.0 mm (6) 40 (103.5) (31.5) 75 (12.5) Four, M4 26 (38) (129.4) 171 75 161 (185) (173.4) (85.5) (130) (90) (172) 230 220 Refer to the FZ3-900-series Catalog (Cat. No. Q171-E1) for information on the ratings and performance of Intelligent Cameras, High-speed Cameras, Compact Digital Cameras, Camera Cables, and Peripheral Devices. 11 12 Optical Chart Intelligent Compact Camera Narrow View Standard Wide View (Long-distance) Narrow View (Short-distance) FZ-SQ010F FZ-SQ050F FZ-SQ100F FZ-SQ100N 300 240 Field of vision 13 7.5 Field of vision Field of vision 191 153 33 13 8.2 8.2 4.7 60 38 to 0 53 Field of vision 56 0 to 29 53 33 215 0 970 18 32 to 220 0 380 to Intelligent Cameras, Autofocus Cameras Narrow View FZ-SLC15 FZ-SZC15 Field of vision 13.8 to 14.9 Field of vision 13.8 to 14.9 2.9 to 3.1 2.9 to 3.1 13.8 to 14.9 0 2.9 to 3.1 55 35 to 0 13.8 to 14.9 2.9 to 3.1 67.5 to 47.5 Wide View FZ-SLC100 FZ-SZC100 29 to 100 29 to 100 Field of vision Field of vision 29 to 100 12.6 to 52 12.6 to 52 to 0 70 29 to 100 12.6 to 52 190 0 12.6 to 52 to 77.5 197.5 * Field of Vision The images displayed on the monitor will be rectangular images of 640x480 pixels. The valid processing area for measurements is the 480x480-pixel area in the middle. The above figures show the dimensions of the middle 480x480 pixels. 13 2 Million-pixel Digital Camera FZ-S@2M 10000 FZ-LEH5 FZ-LEH8 FZ-LEH12 FZ-LEH16 FZ-LEH25 FZ-LEH35 t0 t0 FZ-LEH50 FZ-LEH75 FZ-LEH100 t1 t2 t0 t5 t0 Camera distance (mm) t10 1000 t15 t20 t10 t25 t35 t30 t45 t40 t15 t50 t20 t25 t40 t35 t30 t5 t10 t1 t25 t15 t2 t1 t20 t30 t5 t2 t10 t15 t20 t5 t2 t10 t5 t1 t0 t2 t0 t0 t0 t1 t0 t1 t0.5 t15 100 t5 t2 t10 t5 t10 t5 7 t0.5 t1 t1.5 30 t1 t2 10 100 1000 Field of vision (mm) The 5-mm Extension Tubes (3Z4S-LE ML-EXR) cannot be used with FZ-LEH25 Lenses. 300,000-pixel Small Digital Cameras FZ-SF@, FZ-SP@ 10000 FZ-LES30 FZ-LES16 FZ-LES6 FZ-LES3 WD (See Note.1) (mm) t0 t0 1000 t0 t0 t5 t10 100 t15 t30 t25 t40 t35 t50 t45 t55 t60 t20 t5 t10 t15 t20 10 1 10 100 Field of vision (mm) Note: 1. The vertical axis represents WD, not installation distance. 1000 Optical Chart 300,000-pixel High-speed Camera, and Digital Camera FZ-SH@, FZ-S@ 10000 t0 t0 t0 1000 t60 t50 t50 100 t45 t40 t0 t10 t15 t2 t20 t15 t10 t30 t25 t45 t40 t35 t20 t15 t40 t35 t30 t25 t10 t15 t5 t25 t20 t10 t20 t15 t5 t10 ML-0614 ML-0813 ML-1214 ML-1614 ML-2514 ML-3519 ML-5018 ML-7527 ML-10035 t2 t5 t25 t20 t35 t30 3Z4S-LE t0 t0 t2 Camera distance (mm) 14 t10 t5 t5 t5 t1 t1.5 t0.5 t1.5 t2 t1 t1.5 t2 t1 t1.5 t2 t1 t0 t0.5 t1 t0 t0.5 t0 t0.5 t0.5 t0.5 t1.5 t2 t1.5 t1 t0.5 t1 30 3 10 100 1000 Field of vision (mm) Meaning of Optical Chart The X axis of the optical chart shows the field of vision (mm) (Note1), and the Y axis of the optical chart shows the camera installation distance (mm) (Note2). Camera Extension Tube thickness: t (mm) Lens Camera distance (mm) WD (mm) Field of vision (mm) Y Field of vision X Note: 1. The lengths of the fields of vision given in the optical charts are the lengths of the Y axis. 2. The vertical axis represents WD for small cameras. READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69-2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 (c) OMRON Corporation 2009 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Printed in Japan Cat. No. Q182-E1-01 1210 (1210) (W)