3MTM Surfacemount Header .100 x .100 High Temp N4600 Series * Compliant gull wing leads make a reliable surface mount connection which is easily inspectable * Optional ejector latches * Shrouded to prevent physical and chemical pin damage * High temperature plastic for vapor phase reflow process * Slotted mounting flanges for securing header to board * Raised body for easy inspection and repair * Leads are protected within the body shadow * See regulatory information appendix (RIA) for chemical compliance information Date Modified: February 5, 2007 TS-0168-16 Sheet 1 of 3 Physical Insulator Material: Glass Filled Polyester (PCT) Flammability: UL 94V-0 Color: Beige or Black (RB plating suffix) Contact Material: Copper Alloy Plating Underplating: 100 [ 2.54 m ] Nickel Wiping Area: 30 [ 0.76 m ] Gold Solder Tails: 200 [ 5.08 m ] 60/40 Tin Lead or 300 " [ 7.62 m ] Matte Tin (see ording information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 1 A Insulation Resistance: >1 x 109 at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C Processing: Maximum 260C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Surfacemount Header .100 x .100 High Temp N4600 Series -22XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -20XX Header with no Ejector/Latch -23XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief .56 [14.2] .41 [10.4] .22 Ref [5.6] .37 Ref [9.4] A B C 2X R .06 [1.5] (See Note 2) D .155 .010 [3.94] .33 [8.4] Position 1 Position 1 Orientation Triangle .165 [4.19] .25 [6.4] .100 Ref [2.54] Optional Ejector Latch .17 [4.3] A .100 Ref [2.54] .243 Ref [6.17] .25 Ref [6.4] .025 Sq Typ [0.64] .525 [13.34] Notch A (See Table 1 & Note 1) A .100 Typ Ref [2.54] Notch B (See Table 1) .235 [5.97] .150 [3.81] Section A-A Notch C (See Table 1 & Note 1) In ch [m m ] T ole ra nc e U nles s N o te d in c h Notes: 1. Notches A and C will accommodate 3M Polarization Keys N3518. 2. Accepts a #4, #2, or 3 mm Panhead Machine Screw and Nut. 3. Mounting ears provide mechanical protection to solder joints and are recommended. For applications where there is not room for mounting ears, ejector/latches should be used. 3M Interconnect Solutions http://www.3M.com/interconnects/ .0 .0 0 .1 .01 .0 05 .00 0 [ ] D im e n sio n s fo r R e fe re n c e O n ly TS-0168-16 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Surfacemount Header .100 x .100 High Temp N4600 Series Table 1 Pin Quantity Part Number 10 14 16 20 26 34 40 50 60 N4610 N4614 N4616 N4620 N4626 N4634 N4640 N4650 N4660 Dimensions Polarization Notches A B C D 1.50 [38.2] 1.70 [43.2] 1.80 [45.8] 2.00 [50.9] 2.30 [58.5] 2.70 [68.6] 3.00 [76.3] 3.50 [89.0] 4.00 [101.7] 1.20 [30.5] 1.40 [35.6] 1.50 [38.2] 1.70 [43.2] 2.00 [50.9] 2.40 [61.0] 2.70 [68.6] 3.20 [81.3] 3.70 [94.0] 0.90 [22.9] 1.10 [28.0] 1.20 [30.5] 1.40 [35.6] 1.70 [43.2] 2.10 [53.4] 2.40 [61.0] 2.90 [73.7] 3.40 [86.4] 0.71 [18.0] 0.91 [23.1] 1.01 [25.6] 1.21 [30.7] 1.51 [38.3] 1.91 [48.5] 2.21 [56.1] 2.71 [68.8] 3.21 [81.5] B BC ABC ABC ABC ABC ABC ABC ABC Breakaway Tab Table 2 3M Part Number Latch Descr. Latch/Ejector Dimensions F G N3505-22 Short 0.335 [ 8.51] 0.726 [18.44] N3505-23 Long 0.484 [12.29] 0.875 [22.23] 3518 .34 Ref [8.6] .15 [3.8] .177 [4.50] .200 [5.08] .09 [2.3] .02 [0.5] 3M Part No. N3518 Polarizing Key Material: Black LCP .080 Typ [2.03] G F .195 [4.95] .043 [ 1.09 ] .100 Typ [2.54] .098 [2.48] .162 [4.11] .115 [ 2.92 ] 2x O .116 [2.95] (See Note 1) Latch/Ejector Material: Glass FilledPolyester (PCT) .375 [9.53] .050 [1.27] Recommended Printed Circuit Board Pattern Ordering Information Ejector Latch (Order Separately) X46XX-20XX-XX Plating suffix: blank = tin-lead solder tails (App. E3 & C2 Apply) RB = matte tin solder tails (App. E1 & C1 Apply) N = High Temp. Beige (PCT) blank Pltg. Suffix N = High Temp. Black (PCT) RB Pltg. Req'd. Pin Qty (See Table 1) Polarization: 0 = for pin qty 14 to 60 5 = for pin qty 10 Polarizing Key (Order Separately) N3518 (black only) Body style: 0 = with mounting ears 1 = without mounting ears 3M Interconnect Solutions http://www.3M.com/interconnects/ N3505-22 (short, beige) N3505-22B (short, black) N3505-23 (long, beige) N3505-23B (long, black) TS-0168-16 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-A (c) 3M 2007