16-3
FRONTIER
ELECTRONICS CO., LTD.
1A SURFACE MOUNT BRIDGE RECTIFIERS
FEATURES
! PLASTIC MATERIAL USED CARRIES UNDERWRITERS
LABORATORY RECOGNITION 94V-0
! GLASS PASSIVATED CHIP
! IDEAL FOR PRINTED CIRCUIT BOARD
! HIGH TEMP ERATU RE SOLDERI NG GUARANTEED:
260℃/10S AT 5 LBS., (2.3KG) TENSION
MECHANICAL DATA
! CASE:MOLDED PLASTI C
! TERMINALS:LEAD SOLDERABLE PER MIL-STD-202,
METHOD 208
! P OLARITY:POLARITY SYMBOLS MARKED ON BODY
! MOUNTING POSITION:ANY
! WEIGHT:1.0 GRAMS CASE-DFS
DIMENSIONS IN INCHES AND (MILLIMETERS)
MAXIMUM RATINGS AND ELEC TRIC AL CHARACTER ISTICS
RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD.
FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS SYMBOL DF005S DF01S DF02S DF04S DF06S DF08S DF10S UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 200 400 600 800 1000 V
MAXIMUM RMS VOLTAGE VRMS 35 70 140 280 420 560 700 V
MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 200 400 600 800 1000 V
MAXIMUM AVER AGE FORWAR D OU TPUT RE CTIFIED
CURRENT AT TA=40°CIO1.0 A
PEAK FORWARD SURGE CURRENT SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD IFSM 50 A
TYPICAL JUNCTION CAPACITANCE PER ELEMENT (NOTE 1) CJ25 PF
STORAGE TEMPERATURE RANGE TSTG - 55 TO + 150 ℃
OP ER ATING TEMPER ATURE RANGE TOP - 55 TO + 150 ℃
ELECTRICAL CHARACTERIST I CS (A T TA =25 °
°°
°C UNLESS OTHE RWISE NOTED)
CHARACTERISTICS SYMBOL DF005S DF01S DF02S DF04S DF06S DF08S DF10S UNITS
MAXIMUM INSTANTANEOUS FORWARD VOLTAGE DROP PER
ELEMENT AT 1.0A VF1.1 1.2 V
MAXIMUM REVERSE CURRENT T
A=25℃
AT RATED DC BLOCKING VOLTAGE PER ELEMENT TA=125℃IR10
0.5 µA
mA
NOTE︰
1. MEASURED AT 1.0 MHZ AND APPLIED REVERSE V OLTAGE OF 4.0 VOLTS
DF005S
THRU
DF10S
0.130(3.3)
0.120(3.05)
0.335(8.51)
0.320(8.13)
+
0.205(5.2)
0.195(5.0)
0.047(1.20)
0.040(1.02)
~
-
~
0.404(10.3)
0.386(9.80)
0.060(1.524)
0.040(1.016)
0.255(6.5)
0.245(6.2)
0.013(0.330)
0.009(0.241)