MC78L05ACDR2G - ON SEMICONDUCTOR

© Semiconductor Components Industries, LLC, 2007

September, 2007 - Rev. 13

1Publication Order Number:

MC78L00A/D

MC78L00A Series,

NCV78L00A

100 mA Positive Voltage

Regulators

The MC78L00A Series of positive voltage regulators are

inexpensive, easy-to-use devices suitable for a multitude of

applications that require a regulated supply of up to 100 mA. Like

their higher powered MC7800 and MC78M00 Series cousins, these

regulators feature internal current limiting and thermal shutdown

making them remarkably rugged. No external components are

required with the MC78L00 devices in many applications.

These devices offer a substantial performance advantage over the

traditional zener diode-resistor combination, as output impedance

and quiescent current are substantially reduced.

Features

•Wide Range of Available, Fixed Output Voltages

•Low Cost

•Internal Short Circuit Current Limiting

•Internal Thermal Overload Protection

•No External Components Required

•Complementary Negative Regulators Offered (MC79L00A Series)

•Pb-Free Packages are Available

•NCV Prefix for Automotive and Other Applications Requiring Site

and Control Changes

Figure 1. Representative Schematic Diagram

15k

Q3 Q5 Input

Output

Ground

Q11

Q12

3.0

0-25k

2.85k

5.0k

Q10

3.8k Q4 Q6

1.2k 1.9k 19k 2.2k Q9

1.0k

420

Z1 Q2

Figure 2. Standard Application

A common ground is required between the input and the output voltages. The

input voltage must remain typically 2.0 V above the output voltage even during

the low point on the input ripple voltage.

* Cin is required if regulator is located an appreciable distance from power

supply filter.

** CO is not needed for stability; however, it does improve transient response.

MC78LXXA

Input

Cin*

0.33mFCO**

Output

TO-92

P SUFFIX

CASE 029

See detailed ordering and shipping information in the package

dimensions section on page 9 of this data sheet.

ORDERING INFORMATION

Pin: 1. Output

2. Ground

3. Input

PIN CONNECTIONS

(Top View)

VOUT

GND

VIN

GND

SOIC-8*

D SUFFIX

CASE 751

*SOIC-8 is an internally modified SO-8 package. Pins

2, 3, 6, and 7 are electrically common to the die attach

flag. This internal lead frame modification decreases

package thermal resistance and increases power

dissipation capability when appropriately mounted on

a printed circuit board. SOIC-8 conforms to all ex‐

ternal dimensions of the standard SO-8 package.

See general marking information in the device marking

section on page 15 of this data sheet.

DEVICE MARKING INFORMATION

http://onsemi.com

123

BENT LEAD

TAPE & REEL

AMMO PACK

STRAIGHT LEAD

BULK PACK

MC78L00A Series, NCV78L00A

http://onsemi.com

MAXIMUM RATINGS (TA = +125°C, unless otherwise noted.)

Rating Symbol Value Unit

Input Voltage (2.6 V-8.0 V)

Input Voltage (12 V-18 V)

Input Voltage (24 V)

VI30

Vdc

Storage Temperature Range Tstg -65 to +150 °C

Operating Junction Temperature Range TJ-40 to +150 °C

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

*This device series contains ESD protection and exceeds the following tests:

Human Body Model 2000 V per MIL-STD-883, Method 3015

Machine Model Method 200 V

ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, -40°C < TJ < +125°C (for MC78LXXAB,

NCV78L05A), 0°C < TJ < +125°C (for MC78LXXAC), unless otherwise noted.)

MC78L05AC, AB, NCV78L05A

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO4.8 5.0 5.2 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

7.0 Vdc ≤ VI ≤ 20 Vdc

8.0 Vdc ≤ VI ≤ 20 Vdc

Regline

150

100

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

5.0

Output Voltage

(7.0 Vdc ≤ VI ≤ 20 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(VI = 10 V, 1.0 mA ≤ IO ≤ 70 mA)

4.75

5.25

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

3.8

6.0

5.5

Input Bias Current Change

(8.0 Vdc ≤ VI ≤ 20 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 40 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 8.0 Vdc ≤ VI ≤ 18 V, TJ = +25°C)

RR 41 49 - dB

Dropout Voltage (TJ = +25°C) VI - VO- 1.7 - Vdc

NOTE: NCV78L05A: Tlow = -40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring

site and change control.

MC78L00A Series, NCV78L00A

http://onsemi.com

ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, -40°C < TJ < +125°C (for MC78LXXAB),

0°C < TJ < +125°C (for MC78LXXAC), unless otherwise noted.)

MC78L08AC, AB

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO7.7 8.0 8.3 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

10.5 Vdc ≤ VI ≤ 23 Vdc

11 Vdc ≤ VI ≤ 23 Vdc

Regline

175

125

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

8.0

Output Voltage

(10.5 Vdc ≤ VI ≤ 23 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(VI = 14 V, 1.0 mA ≤ IO ≤ 70 mA)

7.6

8.4

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

3.0

6.0

5.5

Input Bias Current Change

(11 Vdc ≤ VI ≤ 23 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 60 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 12 V ≤ VI ≤ 23 V, TJ = +25°C)

RR 37 57 - dB

Dropout Voltage (TJ = +25°C) VI - VO- 1.7 - Vdc

ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, -40°C < TJ < +125°C (for MC78LXXAB),

0°C < TJ < +125°C (for MC78LXXAC), unless otherwise noted.)

MC78L09AC, AB

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO8.6 9.0 9.4 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

11.5 Vdc ≤ VI ≤ 24 Vdc

12 Vdc ≤ VI ≤ 24 Vdc

Regline

175

125

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

8.0

Output Voltage

(11.5 Vdc ≤ VI ≤ 24 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(VI = 15 V, 1.0 mA ≤ IO ≤ 70 mA)

8.5

9.5

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

3.0

6.0

5.5

Input Bias Current Change

(11 Vdc ≤ VI ≤ 23 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 60 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 13 V ≤ VI ≤ 24 V, TJ = +25°C)

RR 37 57 - dB

Dropout Voltage

(TJ = +25°C)

VI - VO- 1.7 - Vdc

MC78L00A Series, NCV78L00A

http://onsemi.com

ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, -40°C < TJ < +125°C (for MC78LXXAB),

0°C < TJ < +125°C (for MC78LXXAC), unless otherwise noted.)

MC78L12AC, AB

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO11.5 12 12.5 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

14.5 Vdc ≤ VI ≤ 27 Vdc

16 Vdc ≤ VI ≤ 27 Vdc

Regline

120

100

250

200

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

100

Output Voltage

(14.5 Vdc ≤ VI ≤ 27 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(VI = 19 V, 1.0 mA ≤ IO ≤ 70 mA)

11.4

12.6

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

4.2

6.5

6.0

Input Bias Current Change

(16 Vdc ≤ VI ≤ 27 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 80 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = +25°C)

RR 37 42 - dB

Dropout Voltage

(TJ = +25°C)

VI - VO- 1.7 - Vdc

ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, -40°C < TJ < +125°C (for MC78LXXAB),

S 0°C < TJ < +125°C (for MC78LXXAC), unless otherwise noted.)

MC78L15AC, AB / NCV78L15A

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO14.4 15 15.6 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

17.5 Vdc ≤ VI ≤ 30 Vdc

20 Vdc ≤ VI ≤ 30 Vdc

Regline

130

110

300

250

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

150

Output Voltage

(17.5 Vdc ≤ VI ≤ 30 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(VI = 23 V, 1.0 mA ≤ IO ≤ 70 mA)

14.25

15.75

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

4.4

6.5

6.0

Input Bias Current Change

(20 Vdc ≤ VI ≤ 30 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 90 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V, TJ = +25°C)

RR 34 39 - dB

Dropout Voltage

(TJ = +25°C)

VI - VO- 1.7 - Vdc

MC78L00A Series, NCV78L00A

http://onsemi.com

ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 0 °C < TJ < +125°C, unless otherwise noted.)

MC78L18AC

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO17.3 18 18.7 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

21.4 Vdc ≤ VI ≤ 33 Vdc

20.7 Vdc ≤ VI ≤ 33 Vdc

22 Vdc ≤ VI ≤ 33 Vdc

21 Vdc ≤ VI ≤ 33 Vdc

Regline -

325

275

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

170

Output Voltage

(21.4 Vdc ≤ VI ≤ 33 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(20.7 Vdc ≤ VI ≤ 33 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(VI = 27 V, 1.0 mA ≤ IO ≤ 70 mA)

17.1

18.9

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

3.1

6.5

6.0

Input Bias Current Change

(22 Vdc ≤ VI ≤ 33 Vdc)

(21 Vdc ≤ VI ≤ 33 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 150 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 23 V ≤ VI ≤ 33 V, TJ = +25°C)

RR 33 48 - dB

Dropout Voltage

(TJ = +25°C)

VI - VO- 1.7 - Vdc

MC78L00A Series, NCV78L00A

http://onsemi.com

ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 0 °C < TJ < +125°C, unless otherwise noted.)

MC78L24AC

Characteristics Symbol Min Typ Max Unit

Output Voltage (TJ = +25°C) VO23 24 25 Vdc

Line Regulation

(TJ = +25°C, IO = 40 mA)

27.5 Vdc ≤ VI ≤ 38 Vdc

28 Vdc ≤ VI ≤ 80 Vdc

27 Vdc ≤ VI ≤ 38 Vdc

Regline

300

350

Load Regulation

(TJ = +25°C, 1.0 mA ≤ IO ≤ 100 mA)

(TJ = +25°C, 1.0 mA ≤ IO ≤ 40 mA)

Regload

200

100

Output Voltage

(28 Vdc ≤ VI ≤ 38 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(27 Vdc ≤ VI ≤ 38 Vdc, 1.0 mA ≤ IO ≤ 40 mA)

(28 Vdc ≤ VI = 33 Vdc, 1.0 mA ≤ IO ≤ 70 mA)

(27 Vdc ≤ VI ≤ 33 Vdc, 1.0 mA ≤ IO ≤ 70 mA)

22.8

25.2

Vdc

Input Bias Current

(TJ = +25°C)

(TJ = +125°C)

IIB

3.1

6.5

6.0

Input Bias Current Change

(28 Vdc ≤ VI ≤ 38 Vdc)

(1.0 mA ≤ IO ≤ 40 mA)

DIIB

1.5

0.1

Output Noise Voltage

(TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)

Vn- 200 - mV

Ripple Rejection (IO = 40 mA,

f = 120 Hz, 29 V ≤ VI ≤ 35 V, TJ = +25°C)

RR 31 45 - dB

Dropout Voltage

(TJ = +25°C)

VI - VO- 1.7 - Vdc

MC78L00A Series, NCV78L00A

http://onsemi.com

PD, POWER DISSIPATION (mW)

IIB, INPUT BIAS CURRENT (mA)

IIB, INPUT BIAS CURRENT (mA) VO, OUTPUT VOLTAGE (V)

Figure 3. Dropout Characteristics Figure 4. Dropout Voltage versus

Junction Temperature

Figure 5. Input Bias Current versus

Ambient Temperature

Figure 6. Input Bias Current

versus Input Voltage

Figure 7. Maximum Average Power Dissipation versus

Ambient Temperature - TO-92 Type Package

VI, INPUT VOLTAGE (V)

0 2.0 4.0 6.0 8.0 10

, INPUT/OUTPUT DIFFERENTIAL VOLTAGE (V)

TJ, JUNCTION TEMPERATURE (°C)

0 25 50 75 100 125

-VV

Dropout of Regulation is

defined as when

VO = 2% of VO

TA, AMBIENT TEMPERATURE (°C)

0 25 50 75 100 125 VI, INPUT VOLTAGE (V)

0 5.0 10 15 20 25 30 35 40

TA, AMBIENT TEMPERATURE (°C)

25 50 75 100 125 150

No Heatsink

8.0

6.0

4.0

2.0

2.5

2.0

1.5

1.0

0.5

4.2

4.0

3.8

3.6

3.4

3.2

3.0

5.0

4.0

3.0

2.0

1.0

10,000

1000

100

MC78L05AC

Vout = 5.0 V

TJ = 25°C

MC78L05AC

Vout = 5.0 V

IO = 40 mA

TJ = 25°C

RqJA = 200°C/W

PD(max) to 25°C = 625 mW

IO = 1.0 mA

IO = 40 mA IO = 100 mA

IO = 70 mA

IO = 1.0 mA

IO = 40 mA

MC78L05AC

VI = 10 V

VO= 5.0 V

IO = 40 mA

110

130

150

0.4

0.8

1.2

1.6

2.0

2.4

2.8

02030504010 L, LENGTH OF COPPER (mm)

170 3.2

RqJA

R , THERMAL RESISTANCE

JAθJUNCTION‐TO‐AIR ( C/W)°

, MAXIMUM POWER DISSIPATION (W)

ÎÎÎ

2.0 oz.

Copper

Graph represents symmetrical layout

3.0 mmL

Figure 8. SOIC-8 Thermal Resistance and Maximum

Power Dissipation versus P.C.B. Copper Length

PD(max) for TA = 50°C

MC78L00A Series, NCV78L00A

http://onsemi.com

APPLICATIONS INFORMATION

Design Considerations

The MC78L00A Series of fixed voltage regulators are

designed with Thermal Overload Protection that shuts

down the circuit when subjected to an excessive power

overload condition. Internal Short Circuit Protection limits

the maximum current the circuit will pass.

In many low current applications, compensation

capacitors are not required. However, it is recommended

that the regulator input be bypassed with a capacitor if the

regulator is connected to the power supply filter with long

wire lengths, or if the output load capacitance is large. The

input bypass capacitor should be selected to provide good

high-frequency characteristics to insure stable operation

under all load conditions. A 0.33 mF or larger tantalum,

mylar, or other capacitor having low internal impedance at

high frequencies should be chosen. The bypass capacitor

should be mounted with the shortest possible leads directly

across the regulators input terminals. Good construction

techniques should be used to minimize ground loops and

lead resistance drops since the regulator has no external

sense lead. Bypassing the output is also recommended.

Figure 9. Current Regulator

Figure 10. ± 15 V Tracking Voltage Regulator

The MC78L00 regulators can also be used as a current source

when connected as above. In order to minimize dissipation the

MC78L05C is chosen in this application. Resistor R determines

the current as follows:

For example, a 100 mA current source would require R to be a

50W, 1/2 W resistor and the output voltage compliance would be

the input voltage less 7 V.

IO = 5.0 V + IB

IIB = 3.8 mA over line and load changes

Input

0.33mFR

MC78L05A

Constant

Current to

Grounded Load

MC1741

+20V

0.33mFMC78L15A +VO

10k

-VO

6.5

20V MPS A70

MPS U55

0.33mF

+VI

-VI

MC78LXXA

MC79LXXA

+VO

-VO

0.33mF

0.1mF

Figure 11. Positive and Negative Regulator

MC78L00A Series, NCV78L00A

http://onsemi.com

ORDERING INFORMATION

Device Output Voltage

Operating

Temperature Range Package Shipping†

MC78L05ABD

5.0 V TJ = -40° to +125°C

SOIC-8 98 Units/Rail

MC78L05ABDG SOIC-8 98 Units/Rail

MC78L05ABDR2 SOIC-8 2500 Tape & Reel

MC78L05ABDR2G SOIC-8 (Pb-Free) 2500 Tape & Reel

NCV78L05ABDR2* SOIC-8 2500 Tape & Reel

NCV78L05ABDR2G* SOIC-8 (Pb-Free) 2500 Tape & Reel

MC78L05ABP TO-92 2000 Units/Bag

MC78L05ABPG TO-92 (Pb-Free) 2000 Units/Bag

NCV78L05ABPG* TO-92 (Pb-Free) 2000 Units/Bag

MC78L05ABPRA TO-92 2000 Tape & Reel

MC78L05ABPRAG TO-92 (Pb-Free) 2000 Tape & Reel

NCV78L05ABPRAG* TO-92 (Pb-Free) 2000 Tape & Reel

MC78L05ABPRE TO-92 2000 Tape & Reel

MC78L05ABPREG TO-92 (Pb-Free) 2000 Tape & Reel

NCV78L05ABPREG* TO-92 (Pb-Free) 2000 Tape & Reel

MC78L05ABPRM TO-92 2000 Ammo Pack

MC78L05ABPRMG TO-92 (Pb-Free) 2000 Ammo Pack

NCV78L05ABPRMG* TO-92 (Pb-Free) 2000 Ammo Pack

NCV78L05ABPRPG* TO-92 (Pb-Free) 2000 Ammo Pack

MC78L05ACD

5.0 V TJ = 0° to +125°C

SOIC-8 98 Units/Rail

MC78L05ACDG SOIC-8 (Pb-Free) 98 Units/Rail

MC78L05ACDR2 SOIC-8 2500 Tape & Reel

MC78L05ACDR2G SOIC-8 (Pb-Free) 2500 Tape & Reel

MC78L05ACP TO-92 2000 Units/Bag

MC78L05ACPG TO-92 (Pb-Free) 2000 Units/Bag

MC78L05ACPRA TO-92 2000 Tape & Reel

MC78L05ACPRAG TO-92 (Pb-Free) 2000 Tape & Reel

MC78L05ACPRE TO-92 2000 Tape & Reel

MC78L05ACPREG TO-92 (Pb-Free) 2000 Tape & Reel

MC78L05ACPRM TO-92 2000 Ammo Pack

MC78L05ACPRMG TO-92 (Pb-Free) 2000 Ammo Pack

MC78L05ACPRP TO-92 2000 Ammo Pack

MC78L05ACPRPG TO-92 (Pb-Free) 2000 Ammo Pack

*NCV78L05A: Tlow = -40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MC78L00A Series, NCV78L00A

http://onsemi.com

ORDERING INFORMATION (continued)

Device Output Voltage

Operating

Temperature Range Package Shipping†

MC78L08ABD

8.0 V

TJ = -40° to +125°C

SOIC-8 98 Units/Rail

MC78L08ABDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L08ABDR2 SOIC-8 2500 Tape & Reel

MC78L08ABDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

NCV78L08ABDR2* SOIC-8 2500 Tape & Reel

NCV78L08ABDR2G* SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L08ABP TO-92 2000 Units/Bag

MC78L08ABPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L08ABPRA TO-92 2000 Tape & Reel

MC78L08ABPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L08ABPRP TO-92 2000 Ammo Pack

MC78L08ABPRPG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L08ACD

TJ = 0° to +125°C

SOIC-8 98 Units/Rail

MC78L08ACDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L08ACDR2 SOIC-8 2500 Tape & Reel

MC78L08ACDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L08ACP TO-92 2000 Units/Bag

MC78L08ACPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L08ACPRA TO-92 2000 Tape & Reel

MC78L08ACPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L08ACPRE TO-92 2000 Tape & Reel

MC78L08ACPREG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L08ACPRP TO-92 2000 Ammo Pack

MC78L08ACPRPG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L00A Series, NCV78L00A

http://onsemi.com

ORDERING INFORMATION (continued)(continued)

Device Shipping†

Package

Operating

Temperature Range

Output Voltage

MC78L09ABD

9.0 V TJ = -40° to +125°C

SOIC-8 98 Units/Rail

MC78L09ABDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L09ABDR2 SOIC-8 2500 Tape & Reel

MC78L09ABDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L09ABPRA TO-92 2000 Tape & Reel

MC78L09ABPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L09ABPRP TO-92 2000 Ammo Pack

MC78L09ABPRPG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L09ACD

9.0 V TJ = 0° to +125°C

SOIC-8 98 Units/Rail

MC78L09ACDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L09ACDR2 SOIC-8 2500 Tape & Reel

MC78L09ACDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L09ACP TO-92 2000 Units/Bag

MC78L09ACPG TO-92

(Pb-Free)

2000 Units/Bag

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MC78L00A Series, NCV78L00A

http://onsemi.com

ORDERING INFORMATION (continued)

Device Output Voltage

Operating

Temperature Range Package Shipping†

MC78L12ABD

12 V

TJ = -40° to +125°C

SOIC-8 98 Units/Rail

MC78L12ABDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L12ABDR2 SOIC-8 2500 Tape & Reel

MC78L12ABDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

NCV78L12ABDG* SOIC-8

(Pb-Free)

98 Units/Rail

NCV78L12ABDR2* SOIC-8 2500 Tape & Reel

NCV78L12ABDR2G* SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L12ABP TO-92 2000 Units/Bag

MC78L12ABPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L12ABPRP TO-92 2000 Ammo Pack

MC78L12ABPRPG TO-92

(Pb-Free)

2000 Ammo Pack

NCV78L12ABPG* TO-92

(Pb-Free)

2000 Units/Bag

MC78L12ACD

TJ = 0° to +125°C

SOIC-8 98 Units/Rail

MC78L12ACDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L12ACDR2 SOIC-8 2500 Tape & Reel

MC78L12ACDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L12ACP TO-92 2000 Units/Bag

MC78L12ACPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L12ACPRA TO-92 2000 Tape & Reel

MC78L12ACPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L12ACPRE TO-92 2000 Tape & Reel

MC78L12ACPREG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L12ACPRM TO-92 2000 Ammo Pack

MC78L12ACPRMG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L12ACPRP TO-92 2000 Ammo Pack

MC78L12ACPRPG TO-92

(Pb-Free)

2000 Ammo Pack

*NCV78L12A: Tlow = -40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MC78L00A Series, NCV78L00A

http://onsemi.com

ORDERING INFORMATION (continued)

Device Output Voltage

Operating

Temperature Range Package Shipping†

MC78L15ABD

15 V

TJ = -40° to +125°C

SOIC-8 98 Units/Rail

MC78L15ABDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L15ABDR2 SOIC-8 2500 Tape & Reel

MC78L15ABDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

NCV78L15ABDR2G* SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L15ABP TO-92 2000 Units/Bag

MC78L15ABPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L15ABPRA TO-92 2000 Tape & Reel

MC78L15ABPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L15ABPRP TO-92 2000 Ammo Pack

MC78L15ABPRPG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L15ACD

TJ = 0° to +125°C

SOIC-8 98 Units/Rail

MC78L15ACDG SOIC-8

(Pb-Free)

98 Units/Rail

MC78L15ACDR2 SOIC-8 2500 Tape & Reel

MC78L15ACDR2G SOIC-8

(Pb-Free)

2500 Tape & Reel

MC78L15ACP TO-92 2000 Units/Bag

MC78L15ACPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L15ACPRA TO-92 2000 Tape & Reel

MC78L15ACPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L15ACPRP TO-92 2000 Ammo Pack

MC78L15ACPRPG TO-92

(Pb-Free)

2000 Ammo Pack

*NCV78L15A: Tlow = -40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MC78L00A Series, NCV78L00A

http://onsemi.com

ORDERING INFORMATION (continued)

Device Output Voltage

Operating

Temperature Range Package Shipping†

MC78L18ABP

18 V

TJ = -40° to +125°C

TO-92 2000 Units/Bag

MC78L18ABPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L18ACP

TJ = 0° to +125°C

TO-92 2000 Units/Bag

MC78L18ACPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L18ACPRA TO-92 2000 Tape & Reel

MC78L18ACPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L18ACPRM TO-92 2000 Ammo Pack

MC78L18ACPRMG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L18ACPRP TO-92 2000 Ammo Pack

MC78L18ACPRPG TO-92

(Pb-Free)

2000 Ammo Pack

MC78L24ABP

24 V

TJ = -40° to +125°C

TO-92 2000 Units/Bag

MC78L24ABPG TO-92

(Pb-Free)

2000 Units/Bag

NCV78L24ABPRPG* TO-92

(Pb-Free)

2000 Units/Bag

MC78L24ACP

TJ = 0° to +125°C

TO-92 2000 Units/Bag

MC78L24ACPG TO-92

(Pb-Free)

2000 Units/Bag

MC78L24ACPRA TO-92 2000 Tape & Reel

MC78L24ACPRAG TO-92

(Pb-Free)

2000 Tape & Reel

MC78L24ACPRP TO-92 2000 Ammo Pack

MC78L24ACPRPG TO-92

(Pb-Free)

2000 Ammo Pack

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MC78L00A Series, NCV78L00A

http://onsemi.com

ALYWB

8LxxA

SOIC-8

D SUFFIX

CASE 751

xx = 05, 08, 09, 12, or 15

A = Assembly Location

L = Wafer Lot

Y = Year

W = Work Week

B, C = Temperature Range

G= Pb-Free Package

MARKING DIAGRAMS

MC78L

zzABP

ALYWWG

zz = 05, 08, 09, 12, 15, 18 or 24

A = Assembly Location

L = Wafer Lot

Y = Year

WW = Work Week

G= Pb-Free Package

(Note: Microdot may be in either location)

TO-92

P SUFFIX

CASE 029

ALYWC

8LxxA

MC78L

zzACP

ALYWWG

123

MC78L00A Series, NCV78L00A

http://onsemi.com

PACKAGE DIMENSIONS

SOIC-8 NB

D SUFFIX

CASE 751-07

ISSUE AJ

SEATING

PLANE

X 45_

NOTES:

1. DIMENSIONING AND TOLERANCING PER

ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

3. DIMENSION A AND B DO NOT INCLUDE

MOLD PROTRUSION.

4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)

PER SIDE.

5. DIMENSION D DOES NOT INCLUDE DAMBAR

PROTRUSION. ALLOWABLE DAMBAR

PROTRUSION SHALL BE 0.127 (0.005) TOTAL

IN EXCESS OF THE D DIMENSION AT

MAXIMUM MATERIAL CONDITION.

6. 751-01 THRU 751-06 ARE OBSOLETE. NEW

STANDARD IS 751-07.

0.10 (0.004)

DIM

MIN MAX MIN MAX

INCHES

4.80 5.00 0.189 0.197

MILLIMETERS

B3.80 4.00 0.150 0.157

C1.35 1.75 0.053 0.069

D0.33 0.51 0.013 0.020

G1.27 BSC 0.050 BSC

H0.10 0.25 0.004 0.010

J0.19 0.25 0.007 0.010

K0.40 1.27 0.016 0.050

M0 8 0 8

N0.25 0.50 0.010 0.020

S5.80 6.20 0.228 0.244

-X-

-Y-

0.25 (0.010)

-Z-

0.25 (0.010) ZSXS

____

1.52

0.060

7.0

0.275

0.6

0.024

1.270

0.050

4.0

0.155

ǒmm

inchesǓ

SCALE 6:1

*For additional information on our Pb-Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

MC78L00A Series, NCV78L00A

http://onsemi.com

PACKAGE DIMENSIONS

TO-92 (TO-226)

P SUFFIX

CASE 29-11

ISSUE AM

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. CONTOUR OF PACKAGE BEYOND DIMENSION R

IS UNCONTROLLED.

4. LEAD DIMENSION IS UNCONTROLLED IN P AND

BEYOND DIMENSION K MINIMUM.

SECTION X-X

SEATING

PLANE DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.175 0.205 4.45 5.20

B0.170 0.210 4.32 5.33

C0.125 0.165 3.18 4.19

D0.016 0.021 0.407 0.533

G0.045 0.055 1.15 1.39

H0.095 0.105 2.42 2.66

J0.015 0.020 0.39 0.50

K0.500 --- 12.70 ---

L0.250 --- 6.35 ---

N0.080 0.105 2.04 2.66

P--- 0.100 --- 2.54

R0.115 --- 2.93 ---

V0.135 --- 3.43 ---

NOTES:

1. DIMENSIONING AND TOLERANCING PER

ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION:

MILLIMETERS.

3. CONTOUR OF PACKAGE BEYOND

DIMENSION R IS UNCONTROLLED.

4. LEAD DIMENSION IS UNCONTROLLED IN

P AND BEYOND DIMENSION K MINIMUM.

SECTION X-X

SEATING

PLANE DIM MIN MAX

MILLIMETERS

A4.45 5.20

B4.32 5.33

C3.18 4.19

D0.40 0.54

G2.40 2.80

J0.39 0.50

K12.70 ---

N2.04 2.66

P1.50 4.00

R2.93 ---

V3.43 ---

STRAIGHT LEAD

BULK PACK

BENT LEAD

TAPE & REEL

AMMO PACK

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any

liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental

damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over

time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under

its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,

or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death

may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees,

subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of

personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.

SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

MC78L00A/D

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800-282-9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81-3-5773-3850

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada

Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loca

Sales Representative