IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
2
IXYS IC Division
IXYS IC Division
IXYS Integrated Circuits Division
IXYS Integrated Circuits Division is a wholly owned subsidiary of IXYS Corporation. Located near Boston, Massachusetts, USA, IXYS Integrated Circuits Division designs,
manufactures, and markets a wide variety of semiconductor devices, and is a major provider of optically isolated electronic components.
IXYS Integrated Circuits Division’s unique mix of high voltage wafer fab, isolation barrier expertise, multi-chip packaging experience, and expertise in analog, power, and mixed
signal design, points the way to more functionality in a smaller footprint at lower cost for your designs.
• IGBT and MOSFET Drivers: High voltage and low-side IGBT and MOSFET drivers, many of which are AEC-Q100 qualifi ed.
• High Voltage ICs: High voltage 8-channel and 16-channel analog switches for the medical and imaging markets, high voltage LED drivers, and others.
• Solid State Relays (SSR): One of the industry’s broadest lines of optically isolated SSRs, available in a wide selection of confi gurations, blocking voltages, and load currents.
• Power Market: Power solid state relays; SCR-based AC power switches (zero-cross & rapid turn-on); and N-channel, depletion-mode, fi eld effect transistors (FET).
• Lighting: High voltage LED drivers.
• High Speed Digital Optical Isolators: New high speed isolators that pass DC signals, require no refresh clocking, and provide 3750Vrms of galvanic isolation.
• I2C Optically Isolated Bus Repeaters: New high speed repeaters that buffer both I2C signals, require no refresh clocking, and provide 3750Vrms of galvanic isolation.
• Portable reader devices: Drivers for ePaper readers and displays.
• RFID Devices: Read-Only and HDX devices for single transponder applications operating in the low frequency (134.2 kHz) range, and supporting ISO 11784/85 standards.
• Non-volatile Digitally Programmable Capacitor: Provides capacitive offset trimming for capacitance sensitive circuits.
• Telecommunications: a broad range of products:
LITELINK® silicon Data Access Arrangement (DAA)
Phone-line interface and monitoring devices
LCAS: Line Card Access Switch products
DC Termination devices for xDSL and ISDN applications
Cybergate™ DAA
Clare, Inc., founded by Carl P. Clare in 1937 as C. P. Clare & Company, was purchased by IXYS Corporation in 2002, and is now known as
IXYS Integrated Circuits Division (as of April, 2012).
Products and Markets
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
3
Table of Contents
Table of Contents
Note: Drawings and photographs of IXYS Integrated Circuits Division products shown in this catalog are for illustrative purposes only
and do not necessarily portray accurate physical details, marking, or branding. They exist solely to provide additional useful information.
TABLE OF CONTENTS
PART NUMBER INDEX
NUMERICAL INDEX TO ALL PRODUCT CATALOG DEVICES ...............................4
SOLID STATE RELAYS
1-FORM-A RELAYS (NORMALLY OPEN) .....................................................7
1-FORM-B RELAYS (NORMALLY CLOSED) ...............................................10
MISCELLANEOUS RELAYS ...................................................................... 11
FAULT PROTECTED RELAYS
CURRENT LIMITING SSRS WITH VTS AND THM.......................................13
OPTICALLY ISOLATED POWER RELAYS
1-FORM-A POWER RELAYS ..................................................................15
1-FORM-B POWER RELAYS ..................................................................15
OPTICALLY ISOLATED AC POWER SWITCHES
OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT ≤1A .............16
OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT >1A .............17
MULTIFUNCTION PRODUCTS: SSR/OPTOCOUPLER
GENERAL PURPOSE MULTIFUNCTION PRODUCTS ....................................... 18
TELECOM MULTIFUNCTION PRODUCTS ..................................................... 43
FIELD EFFECT TRANSISTORS
N-CHANNEL DEPLETION MODE FETS ....................................................19
IGBT & MOSFET GATE DRIVERS
LOW-SIDE GAT E DRIVERS ....................................................................20
600V HIGH SIDE & LOW SIDE GAT E DRIVER ..........................................21
HIGH VOLTAGE HALF-BRIDGE GAT E DRIVER ............................................21
600V HIGH SIDE IGBT & MOSFET GAT E DRIVER ...............................22
1200V HIGH AND LOW SIDE GAT E DRIVER ............................................23
2.5A OUTPUT OPTICALLY COUPLED GAT E DRIVER ...................................23
2.5A OUTPUT HI SPEED GAT E DRIVER OPTOCOUPLER .............................23
OPTICALLY ISOLATED LOAD-BIASED GAT E DRIVERS ...................................24
OPTICALLY ISOLATED PHOTOVOLTAIC GAT E DRIVERS ..................................24
HIGH VOLTAGE PRODUCTS
HIGH VOLTAGE ANALOG SWITCH ARRAYS ................................................25
HIGH VOLTAGE ISOLATED ANALOG SWITCHES ...........................................26
HIGH SPEED DIGITAL OPTICAL ISOLATORS
OPTICALLY ISOLATED I2C BUS REPEATERS ..............................................28
SINGLE-CHANNEL EACH DIRECTION DIGITAL OPTICAL ISOLATOR ..................29
DUAL HIGH SPEED DIGITAL OPTICAL ISOLATOR ........................................29
OPTOCOUPLERS
SINGLE & DUAL OPTOCOUPLERS ...........................................................30
LINEAR OPTOCOUPLERS .......................................................................31
OPTICALLY ISOLATED ERROR AMPLIFIERS ................................................32
LIGHTING & DISPLAY PRODUCTS
HIGH VOLTAGE LED DRIVERS ............................................................... 33
EPAPER GAT E & SOURCE DRIVERS .......................................................34
TELECOMMUNICATIONS PRODUCTS
LITELINK™ SILICON DAA PHONE LINE INTERFACE ...............................36
VOLTAGE MONITOR DEVICES .................................................................37
SINGLE-CHANNEL VOICE-BAND CODEC ..................................................38
CALL PROGRESS TONE DETECTOR .........................................................38
DC TERMINATION ICS (XDSL, ISDN) ...................................................39
LINE CARD ACCESS SWITCHES (LCAS) .................................................40
LCAS FOR RINGING SLIC ..................................................................41
CYBERGATE™ DATA ACCESS ARRANGEMENT (DAA) MODULES ..................41
LINE SENSE RELAY .............................................................................42
TELECOM MULTIFUNCTION PRODUCTS ..................................................... 43
RFID PRODUCTS
RFID TAGS .......................................................................................44
DIGITALLY PROGRAMMABLE CAPACITORS
NON-VOLATILE DIGITAL PROGRAMMABLE CAPACITORS ...............................45
OTHER SEMICONDUCTOR PRODUCTS
HALL-EFFECT SWITCHES ...................................................................... 47
LOAD DRIVER .....................................................................................47
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
4
Part Number IndexPart Number Index
CPC1001N 30
CPC1002N 11
CPC1004N 11
CPC1006N 7
CPC1008N 7
CPC1009N 7
CPC1010N 7
CPC1014N 7
CPC1016N 7
CPC1017N 7
CPC1018N 7
CPC1019N 7
CPC1020N 7
CPC1025N 7
CPC1030N 7
CPC1035N 7
CPC1106N 10
CPC1114N 10
CPC1117N 10
CPC1125N 10
CPC1130N 10
CPC1135N 10
CPC1150N 10
CPC1215 11
CPC1217 11
CPC1218 11
CPC1219 12
CPC1225N 8
CPC1230N 8
CPC1231N 10
CPC1301 30
CPC1302 30
CPC1303 30
CPC1317 7
CPC1330 7
CPC1333 10
CPC1335 7
CPC1390 7
CPC1393 7
CPC1394 7
CPC1465 39
CPC1466 39
CPC1510 7, 13
CPC1511 7, 13
CPC1540 7, 13
CPC1560 7, 13
CPC1563 7, 13
CPC1580 24
CPC1590 24
CPC1593 7, 13
CPC1705Y 15
CPC1706Y 15
CPC1708J 15
CPC1709J 15
CPC1718J 15
CPC1726Y 15
CPC1727J 15
CPC1777J 15
CPC1779J 15
CPC1786J 15
CPC1788J 15
CPC1906Y 15
CPC1907B 15
CPC1908J 15
CPC1909J 15
CPC1916Y 15
CPC1918J 15
CPC1926Y 15
CPC1927J 15
CPC1943 16
CPC1945G 16
CPC1945Y 16
CPC1961 16
CPC1963 16
CPC1964B 17
CPC1964BX6 17
CPC1965G 16
CPC1965Y 16
CPC1966 17
CPC1966B 17
CPC1966BX8 17
CPC1966YX6 17
CPC1966YX8 17
CPC1967J 15
CPC1968J 15
CPC1972 16
CPC1973Y 15
CPC1976 17
CPC1976YX6 17
CPC1977J 15
CPC1978J 15
CPC1979J 15
CPC1981Y 15
CPC1983B 15
CPC1983Y 15
CPC1983YE 15
CPC1986J 15
CPC1988J 15
CPC1998J 17
CPC2014N 9
CPC2017N 9
CPC2025N 9
CPC2030N 9
CPC2125N 10
CPC2317N 11
CPC2330N 11
CPC2907B 15
CPC3701 19
CPC3703 19
CPC3708 19
CPC3710 19
CPC3714 19
CPC3720 19
CPC3730 19
CPC3902 19
CPC3909 19
CPC3960 19
CPC3980 19
CPC3982 19
CPC40055ST 17
PC5001 29
CPC5002 29
CPC5602 19
CPC5603 19
CPC5620 36
CPC5621 36
CPC5622 36
CPC5710 37
CPC5712 37
CPC5750 38
CPC5902 28
CPC5903 28
CPC7220 25
CPC7232 25
CPC7512 27
CPC7514 26
CPC7524 26
CPC7591 40
CPC7592 40
CPC7601 25
CPC7691 40
CPC7692 40
CPC7695 40
CPC7701 25
CPC9909 33
CYG2000 41
CYG2011 41
CYG2020 41
CYG2100 41
CYG2110 41
CYG2111 41
CYG2217 41
CYG2218 41
CYG2320 41
FDA215 24
FDA217 24
IAA110 18
IAB110 18
IAD110 18
IBB110 18
ITC117 43
ITC117L 43
ITC135 43
ITC137 43
IX2113 21
IX2120 23
IX2127 22
IX21844 21
IX3120 23
IX3180 23
IX4340 20
IX4423 20
IX4424 20
IX4424G 20
IX4425 20
IX4426 20
IX4427 20
IX4428 20
IX9908 33
PART NUMBER INDEX
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 5
Part Number Index
Part Number Index
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXD_602 20
IXD_604 20
IXD_604SI 20
IXD_604SIA 20
IXD_609 20
IXD_609SI 20
IXD_614 20
IXD_614SI 20
IXD_630 20
IXD_630M 20
IXEP1400 34
IXEP2300 34
LAA100 9
LAA100L 9
LAA108 9
LAA110 9
LAA110L 9
LAA120 9
LAA120L 9
LAA125 9
LAA125L 9
LAA127 9
LAA127L 9
LAA710 9
LBA110 11
LBA110L 11
LBA120 11
LBA120L 11
LBA127 11
LBA127L 11
LBA710 11
LBA716 11
LBB110 10
LBB120 10
LBB126 10
LBB127 10
LCA100 7
LCA100L 7
LCA110 7
LCA110L 7
LCA120 7
LCA120L 7
LCA125 7
LCA125L 7
LCA127 8
LCA127L 8
LCA129 8
LCA182 8
LCA210 12
LCA210L 12
LCA220 12
LCA701 8
LCA710 8
LCA712 8
LCA715 8
LCA717 8
LCB110 10
LCB111 10
LCB120 10
LCB126 10
LCB127 10
LCB710 10
LCB716 10
LCB717 10
LCC110 12
LCC120 12
LDA100 30
LDA101 30
LDA102 30
LDA110 30
LDA111 30
LDA200 30
LDA201 30
LDA202 30
LDA203 30
LDA210 30
LDA211 30
LDA212 30
LDA213 30
LIA120 32
LIA130 32
LIA135 32
LIA136 32
LOC110 31
LOC111 31
LOC112 31
LOC117 31
LOC210 31
LOC211 31
M-949-11 42
M-980-02 38
MX860 35
MX877 47
MX887D 47
MX887P 47
MXEI1480 35
MXEI2240 34
MXHV9910 33
NCD1015ZP 44
NCD1015M 44
NCD2100 46
NCD2400M 45
OAA160 9
OMA160 8
PAA110 9
PAA110L 9
PAA127 9
PAA132 9
PAA140 9
PAA140L 9
PAA150 9
PAA190 9
PAA191 9
PAA193 9
PBA150 11
PBB150 10
PBB190 10
PD1201 16
PD2401 16
PD2601 16
PLA110 8
PLA110L 8
PLA132 8
PLA134 8
PLA140 8
PLA140L 8
PLA143 8
PLA150 8
PLA160 8
PLA170 8
PLA171 8
PLA190 8
PLA191 8
PLA192 8
PLA193 8
PLA194 8
PLB150 10
PLB171 10
PLB190 10
PM1204 16
PM1205 16
PM1206 16
PS1201 16
PS2401 16
PS2601 16
TS117 18
TS117L 18
TS118 18
TS120 18
TS190 18
TS190L 18
XAA117 9
XAA170 9
XBB170 10
XCA170 8
XCB170 10
XS170 18
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
6For data sheets, go to www.ixysic.com/Products/ProdList.htm
Solid State Relays
Solid State Relays
Features:
• Low drive current
• High reliability
• No EMI/RFI generation
• Arc-free with no snubbing circuits
• AC or DC switching
• Current limiting devices available
• FCC compatible
• Low off-state leakage
Applications:
• Telecommunications/data communications
• Instrumentation
• Multiplexers
• Data acquisition/electronic switching
• Meters (Watt-hour, water, gas)
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
10
21
43
12
22
44
14
41
17
61
20
42
62
4-Pin SOP
8-Pin Flatpack
4-Pin Surface Mount
6-Pin Surface Mount
8-Pin Surface Mount
4-Pin V-DIP
6-Pin DIP
4-Pin SIP (8-Pin Body)
8-Pin SOP
4-Pin DIP (14-Pin Body)
8-Pin DIP
4-Pin DIP
6-Pin Flatpack (8-Pin Body)
Packages are referenced by number in the accompanying solid state relay selection tables.
SOLID STATE RELAYS
Type BI (Bidirectional) relays conduct load current in both directions.
Type BI+ (BI confi guration) relays conduct load current in both directions.
Type BI+ (UNI confi guration) relays, with output MOSFETs wired in parallel, enable higher load
current from positive terminal to negative terminal only.
Type UNI (Unidirectional) relays conduct load current from the positive terminal to the negative
terminal only.
The accompanying SSR tables reference these types (BI, BI+, & UNI) for all devices listed.
4-Pin
V-DIP
6-Pi
n DI
P
8
-
Pi
n
DI
P
4-
Pi
n
DIP
• Replace electromechanical relays
• Replace mechanical switches
• Implement computer control
of electromechanical circuits Polarity Dependent
± Load
± Load
Polarity Independent
Type BI
Control
Input
Load
Current
Load
Voltage
± Load
Do Not
Use
± Load
Type BI+ (BI)
+ Load
– Load
Type BI+ (UNI)
Load+
Load–
Type UNI
All waveforms are into a resistive load
0V
0A
+ Load
- Load
0A
Control
Input
Load
Current
Load
Voltage
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 7
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Solid State Relays
Solid State Relays
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
CPC1006N BI 60 75 10 0.5 10 / 10 1500 1 10 Low IF , EN 50130-4
CPC1008N BI 100 150 8 2 2 / 1 1500 1 10
CPC1009N BI 100 150 8 2 2 / 0.5 1500 0.02 10 Very low off-state ILEAK ≤ 20nA
CPC1010N BI 250 170 11.5 2 3 / 3 1500 1 10
CPC1014N BI 60 400 2 2 2 / 1 1500 1 10 EN 50130-4
CPC1016N BI 100 100 16 2 2 / 1 1500 1 10
CPC1017N BI 60 100 16 1 10 / 10 1500 1 10 Low IF , EN 50130-4
CPC1018N BI 60 600 0.8 1 3 / 2 1500 1 10 Low IF , EN 50130-4
CPC1019N BI 60 750 0.6 2 3 / 3 1500 1 10
CPC1020N BI 30 1200 0.25 2 3 / 3 1500 1 10 High load current, very low on-resistance
CPC1025N BI 400 120 30 2 2 / 1 1500 1 10
CPC1030N BI 350 120 30 2 2 / 1 1500 1 10
CPC1035N BI 350 100 35 2 2 / 1 1500 1 10
CPC1225N BI 400 120 30 2 2 / 1 1500 1 10 EN/IEC 60950-1 Supplementary Insulation (0.4mm distance through insulation)
CPC1230N BI 350 120 30 2 2 / 1 1500 1 10 EN/IEC 60950-1 Supplementary Insulation (0.4mm distance through insulation)
CPC1317 BI 70 150 16 1 2.5 / 2.5 3750 1 21 EN 50130-4 (installation class 3), transient voltage suppression (TVS)
CPC1330 BI 350 120 30 2 2 / 1 5000 1 42, 43 Enhanced isolation voltage
CPC1335 BI 350 100 35 1 10 / 10 3750 1 21 Low IF , EN 50130-4 (installation class 3), transient voltage suppression (TVS)
CPC1390 BI 400 140 22 2 1 / 1 5000 1 42, 43, 44 Enhanced isolation voltage
CPC1393 BI 600 90 50 2 5 / 5 5000 1 42, 43, 44 Enhanced isolation voltage
CPC1394 BI 600 120 35 2 5 / 3 5000 1 42, 43, 44 Enhanced isolation voltage
CPC1510 BI+ 250 200 15 2 2 / 2 3750 1 12, 14 Current limiting with thermal management - see page 13
CPC1511 BI 230 450 4 2.5 4 / 2 3750 1 36 Current limiting with thermal management - see page 13
CPC1540 BI+ 350 120 25 2 2 / 2 3750 1 12, 14 Current limiting with thermal management - see page 13
CPC1560 BI+ 60 300 5.6 1.1 0.1 / 0.4 3750 1 20, 22 Current limiting with thermal management - see page 13
CPC1563 BI+ 600 120 35 2 2 / 2 3750 1 12, 14 Current limiting with thermal management - see page 13
CPC1593 BI+ 600 120 35 2 2 / 2 3750 1 12, 14 Current limiting, thermal management, voltage triggered shutdown - see page 13
LCA100 BI+ 350 120 25 5 5 / 5 3750 1 12, 14
LCA100L BI+ 350 120 25 5 5 / 5 3750 1 12, 14 Current limiting
LCA110 BI+ 350 120 35 2 3 / 3 3750 1 12, 14
LCA110L BI+ 350 120 35 2 3 / 3 3750 1 12, 14 Current limiting
LCA120 BI+ 250 170 20 5 3 / 3 3750 1 12, 14
LCA120L BI+ 250 150 20 5 3 / 3 3750 1 12, 14 Current limiting
LCA125 BI+ 300 170 16 5 5 / 5 3750 1 12, 14
LCA125L BI+ 300 170 20 5 5 / 5 3750 1 12, 14 Current limiting
1-Form-A Relays: Single-Pole
• 1-FORM-A RELAYS (NORMALLY OPEN)
BI BI+
NEW!
NEW!
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
8
Solid State Relays
Solid State Relays
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
LCA127 BI+ 250 200 10 55 / 5 3750 1 12, 14
LCA127L BI+ 250 170 15 55 / 5 3750 1 12, 14 Current limiting
LCA129 BI+ 250 170 20 28 / 8 3750 1 12, 14
LCA182 BI+ 350 120 35 0.25 3 / 3 3750 1 12, 14 Very Low IF
LCA701 BI+ 100 1500 0.3 24 / 1 3750 1 12, 14 High Load Current
LCA710 BI+ 60 1000 0.5 10 2.5 / 0.25 3750 1 12, 14 High Load Current
LCA712 BI+ 60 1000 0.5 10 2.5 / 0.35 3750 0.01 12, 14 High Load Current, Low ILEAK
LCA715 BI+ 60 2200 0.15 52.5 / 0.25 3750 1 12, 14 High Load Current
LCA717 BI+ 30 2000 0.15 23 / 3 3750 1 12, 14 High Load Current
OMA160 BI+ 250 50 100 10 0.125 / 0.125 3750 0.025 12, 14 Low ILEAK , Fast Switching Times
PLA110 BI+ 400 150 22 51 / 0.5 3750 1 12, 14
PLA110L BI+ 400 150 25 51 / 0.25 3750 - 12, 14 Current Limiting
PLA132 BI+ 60 600 1 25 / 2 3750 1 12, 14
PLA134 BI+ 100 350 3 55 / 5 3750 1 12, 14
PLA140 BI+ 400 250 8 53 / 1 3750 1 12, 14
PLA140L BI+ 400 200 13 55 / 3 3750 1 12, 14 Current Limiting
PLA143 BI+ 600 100 50 25 / 5 4000 1 12, 14 Enhanced Isolation Voltage
PLA150 BI+ 250 250 7 52.5 / 0.5 3750 1 12, 14
PLA160 BI+ 300 50 100 10 0.05 / 0.05 3750 0.025 12, 14 Low ILEAK , Fast Switching Times
PLA170 BI+ 800 100 50 55 / 5 3750 1 12, 14
PLA171 BI 800 100 50 25 / 5 5000 1 62 Enhanced Isolation Voltage, High Blocking Voltage (Output Pins 7mm Separation)
PLA190 BI+ 400 150 22 51 / 0.5 5000 1 12, 14 Enhanced Isolation Voltage
PLA191 BI+ 400 250 8 53 / 1 5000 1 12, 14 Enhanced Isolation Voltage
PLA192 BI+ 600 150 22 55 / 5 5000 1 12, 14 Enhanced Isolation Voltage, PLA192E is DIN EN 60747-5-5 Certifi ed
PLA193 BI+ 600 100 50 55 / 5 5000 1 12, 14 Enhanced Isolation Voltage, PLA193E is DIN EN 60747-5-5 Certifi ed
PLA194 BI+ 600 130 35 23 / 2 5000 1 12, 14 Enhanced Isolation Voltage
XCA170 BI+ 350 100 50 55 / 5 3750 1 12, 14
1-Form-A Relays: Single-Pole (continued) BI BI+
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 9
Solid State Relays
Solid State Relays
For data sheets, go to www.ixysic.com/Products/ProdList.htm
1-Form-A Relays: Dual Single-Pole
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
CPC2014N BI 60 400 2 2 2 / 1 1500 1 17 EN 50130-4
CPC2017N BI 60 120 16 1 3 / 3 1500 1 17 Low IF , EN 50130-4
CPC2025N BI 400 120 30 2 2 / 1 1500 1 17
CPC2030N BI 350 120 30 2 2 / 1 1500 1 17
LAA100 BI 350 120 25 5 5 / 5 3750 1 20, 21, 22
LAA100L BI 350 120 25 5 5 / 5 3750 1 20, 21, 22 Current Limiting
LAA108 BI 100 300 8 2 3 / 3 3750 1 20, 21, 22
LAA110 BI 350 120 35 5 3 / 3 3750 1 20, 21, 22
LAA110L BI 350 120 35 5 3 / 3 3750 1 20, 21, 22 Current Limiting
LAA120 BI 250 170 20 5 5 / 5 3750 1 20, 21, 22
LAA120L BI 250 150 25 5 5 / 5 3750 1 20, 21, 22 Current Limiting
LAA125 BI 350 170 16 5 5 / 5 3750 1 20, 21, 22
LAA125L BI 350 150 18 5 5 / 5 3750 1 20, 21, 22 Current Limiting
LAA127 BI 250 200 10 5 5 / 5 3750 1 20, 21, 22
LAA127L BI 250 170 15 5 5 / 5 3750 1 20, 21, 22 Current Limiting
LAA710 BI 60 1000 0.5 10 2.5 / 0.25 3750 1 20, 22
OAA160 BI 250 50 100 3 0.125 / 0.125 3750 0.025 20, 21, 22 Very Low ILEAK , Fast Switching Times
PAA110 BI 400 150 22 5 1 / 0.25 3750 1 20, 21, 22
PAA110L BI 400 150 25 5 1 / 0.5 3750 1 20, 21, 22 Current Limiting
PAA127 BI 280 200 10 3 0.5 / 0.5 3750 0.025 20, 21, 22 Very Low ILEAK , Fast Switching Times
PAA132 BI 60 600 1 2 5 / 2 3750 1 20, 22
PAA140 BI 400 250 8 5 3 / 1 3750 1 20, 21, 22
PAA140L BI 400 200 13 5 5 / 3 3750 1 20, 22 Current Limiting
PAA150 BI 250 250 7 5 2.5 / 0.5 3750 1 20, 21, 22
PAA190 BI 400 150 22 5 1 / 0.5 5000 1 20, 22 Enhanced Isolation Voltage
PAA191 BI 400 250 8 5 3 / 1 5000 1 20, 22 Enhanced Isolation Voltage
PAA193 BI 600 100 50 5 5 / 5 5000 10 20, 22 Enhanced Isolation Voltage
XAA117 BI 60 150 16 1 5 / 5 3750 1 20, 21, 22 Low IF
XAA170 BI 350 100 50 5 5 / 5 3750 1 20, 21, 22
BI
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
10
Solid State Relays
Solid State Relays
For data sheets, go to www.ixysic.com/Products/ProdList.htm
1-Form-B Relays: Dual Single-Pole
1-Form-B Relays: Single-Pole
• 1-FORM-B RELAYS (NORMALLY CLOSED)
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
CPC1106N BI 60 75 10 0.5 10 / 10 1500 1 10 Low IF , EN 50130-4
CPC1114N BI 60 400 2 2 2 / 5 1500 1 10
CPC1117N BI 60 150 16 1 10 / 10 1500 1 10 Low IF , EN 50130-4
CPC1125N BI 400 100 35 2 2 / 2 1500 5 10
CPC1130N BI 350 120 30 2 2 / 2 1500 5 10
CPC1135N BI 350 120 35 2 2 / 2 1500 5 10
CPC1150N BI 350 120 50 2 1 / 2 1500 5 10
CPC1231N BI 350 120 30 2 2 / 2 1500 5 10 EN/IEC 60950-1 Supplementary Insulation (0.4mm distance through insulation)
CPC1333 BI 350 130 30 2 2 / 3 5000 1 42, 43 Enhanced Isolation Voltage
LCB110 BI+ 350 120 35 5 3 / 3 3750 1 12, 14
LCB111 BI+ 350 120 35 2 5 / 5 3750 1 12, 14
LCB120 BI+ 250 170 20 5 5 / 5 3750 1 12, 14
LCB126 BI+ 250 170 15 5 5 / 5 3750 1 12, 14
LCB127 BI+ 250 200 10 5 5 / 5 3750 1 12, 14
LCB710 BI+ 60 1000 0.6 2 3 / 3 3750 1 12, 14 High Load Current
LCB716 BI+ 60 500 2 2 3 / 3 3750 1 12, 14
LCB717 BI+ 30 1500 0.3 2 2 / 5 3750 1 12, 14 High Load Current
PLB150 BI+ 250 250 7 5 1 / 2.5 3750 1 12, 14
PLB171 BI 800 80 55 2 5 / 5 5000 1 62 Enhanced Isolation Voltage, High Blocking Voltage (Output Pins 7mm Separation)
PLB190 BI+ 400 130 25 2 1 / 2.5 5000 1 12, 14 Enhanced Isolation Voltage
XCB170 BI+ 350 100 50 5 5 / 5 3750 1 12, 14
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
CPC2125N BI 400 100 35 2 2 / 2 1500 5 17
LBB110 BI 350 120 35 5 3 / 3 3750 1 20, 21, 22
LBB120 BI 250 170 20 5 5 / 5 3750 1 20, 22
LBB126 BI 250 170 15 5 5 / 5 3750 1 20, 21, 22
LBB127 BI 250 200 10 5 5 / 5 3750 1 20, 21, 22
PBB150 BI 250 250 7 5 2.5 / 2.5 3750 1 20, 21, 22
PBB190 BI 400 130 25 2 1 / 2.5 5000 1 20, 22
XBB170 BI 350 100 50 5 5 / 5 3750 1 20, 21, 22
BI
BI BI+
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 11
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Solid State Relays
Solid State Relays
1-Form-A & 1-Form-B Combination Relays
1-Form-A Relays: Single-Pole, Unidirectional (DC-only)
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
μA)
Package
Type
(Page 6)
Features and Comments
CPC1002N UNI 60 700 0.55 2 5 / 2 1500 1 10 EN 50130-4
CPC1004N UNI 100 300 4 2 3 / 1 1500 1 10 Extended Operating Temperature Range: -40ºC to +110ºC
• MISCELLANEOUS RELAYS
UNI
1-Form-A Relays: Single-Pole, Voltage-Controlled
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
A/B
(μA)
Package
Type
(Page 6)
Features and Comments
CPC2317N BI 60 120 16 1 3 / 3 1500 1 / 1 17 Low IF
CPC2330N BI 350 120 30 2 3 / 3 1500 1 / 5 17
LBA110 BI 350 120 35 2 3 / 3 3750 1 / 1 20, 21, 22
LBA110L BI 350 120 35 5 3 / 3 3750 1 / 1 20, 21, 22 Current Limiting
LBA120 BI 250 170 20 5 5 / 5 3750 1 / 1 20, 21, 22
LBA120L BI 250 150 25 5 5 / 5 3750 1 / 1 20, 22 Current Limiting
LBA127 BI 250 200 10 5 5 / 5 3750 1 / 1 20, 21, 22
LBA127L BI 250 150 15 5 5 / 5 3750 1 / 1 20, 22 Current Limiting
LBA710 BI 60 1000 0.6 2 5 / 5 3750 1 / 1 20, 22 High Load Current
LBA716 BI 60 1000 0.4 2 5 / 5 3750 1 / 1 20, 22 High Load Current
PBA150 BI 250 250 7 5 2.5 / 2.5 3750 1 / 1 20, 22
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Voltage
(V)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
CPC1215 BI 400 500 6 5 - 12 5 / 3 3750 1 61 Direct drop-in reed relay replacement
CPC1217 BI 60 200 16 5 - 12 5 / 5 2500 1 41 EN 50130-4, direct drop-in reed relay replacement
CPC1218 BI 60 600 1.1 5 - 12 5 / 5 2500 1 41 EN 50130-4, direct drop-in reed relay replacement
BI
BI
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
12 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Solid State Relays
Solid State Relays
2-Form-A Relays: Double-Pole, Single-Throw
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
LCA210 BI 350 85 35 8 3 / 3 3750 1 20, 22
LCA210L BI 350 85 35 8 4 / 4 3750 1 20, 22 Current limiting
LCA220 BI 250 120 20 10 5 / 5 3750 1 20, 22
1-Form-C Relays: Common Input, Single-Pole, Double-Throw
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
LCC110 BI 350 120 35 8 4 / 4 3750 1 20, 21, 22
LCC120 BI 250 170 20 10 5 / 5 3750 1 20, 22
1-Form-B Relays: Single-Pole, Voltage-Controlled
Part
Number
Relay
Type
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input
Control
Voltage
(V)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 6)
Features and Comments
CPC1219 BI 60 200 16 5 - 12 5 / 5 2500 1 41 EN 50130-4, direct drop-in reed relay replacement
BI
BI
BI
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 13
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Fault Protected Relays
Fault Protected Relays
Thermal
Management
Gate Drive
Control
Voltage
Triggered
Shutdown
(VTS)
S1
S2
OUT1
OUT2
OUT1
OUT2
S1
S2
CPC1540, CPC1563, CPC1593
Applications:
• Telephony hook switch
• VoIP gateways
• I/O subsystems
• Electronic switching
• Medical equipment
(Patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
* Deactivates the switch when the load voltage exceeds the VTH threshold while the switch is in current limit.
•
Active current-limiting circuitry
•
Integrated thermal management (ThM)
•
Voltage triggered shutdown (VTS)
20
12
6-Pin Surface Mount
8-Pin DIP
8-Pin
DI
P
22
14
6-Pin DIP
8-Pin Surface Mount
FAULT PROTECTED RELAYS
• Provide excellent power-cross immunity
• Ideal for use in electromagnetically noisy environments
• Resumes normal operation after faults are removed
V
TH
I
LMT
Voltage Threshold Shutdown Delay
Voltage Threshold Reactivation Delay
Current Through Switch
Time
Line Voltage
V
TH
I
LMT
Note: Performance into resistive load.
Voltage Threshold
• CURRENT LIMITING SSRS WITH VOLTAGE TRIGGERED SHUTDOWN & THERMAL MANAGEMENT
36
Power SIP
NEW!
NEW!
Part Number Blocking
Voltage
Input Control
Current
On-Resistance
(Maximum)
Load Current
(Maximum)
Current Limit
(Maximum)
* VTS
Threshold
Switching
Speed
Isolation
Voltage
Package
Type
Features & Comments
DC-Only AC DC-Only AC DC-Only AC (VTH)(t
on / toff)
(VP) (mA) (Ω)(Ω) (mA) (mA) (mAP) (mAP) (V) (ms) (Vrms)
CPC1510 250 2 3.75 15 350 200 920 450 - 2 / 2 3750 12, 14 Industrial applications
CPC1511 230 2.5 - 4 - 450 - 1400 - 4 / 2 3750 36 Industrial applications
CPC1540 350 2 6.75 25 250 120 570 285 100 2 / 2 3750 12, 14 PSTN hook switch applications
CPC1560 60 1.1 1.4 5.6 600 300 1500 900 - 0.1 / 0.4 3750 20, 22 Fast switching speeds
CPC1563 600 2 11.75 35 250 120 570 285 100 2 / 2 3750 12, 14 High blocking voltage
CPC1593 600 2 11.75 35 250 120 570 285 21 2 / 2 3750 12, 14 Power supply start-up
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
14 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Optically Isolated Power Relays
Optically Isolated Power Relays
Applications:
• Robotics
• Medical equipment
• Railroad/traffi c controls
• Consumer appliances
• Industrial control
• Test and measurement equipment
66 - Power SOIC 36 - Power SIP 29 - i4-PAC
29
- i4-PA
C
OPTICALLY ISOLATED POWER RELAYS
•
Blocking voltage up to 1000V
Blocking voltage up to 1000V
P
P
•
On-resistance as low as 0.05 Ohms
On-resistance as low as 0.05 Ohms
•
On/off times from 1ms to 25ms
On/off times from 1ms to 25ms
•
MOSFET-based AC/DC and DC-only power relays
•
Load current up to 22.8A
Load current up to 22.8A
DC
DC (with 5ºC/W heat sink)
•
2500V
2500V
rms
rms
to 5000V
to 5000V
rms
rms isolation from input to output and
to DCB substrate
to DCB substrate
Features:
• Isolated, low thermal impedance
pad for heat sink applications
pad for heat sink applications
• Low input control current
• Low thermal impedances, junction to case (θJC):
0.30°C/W - ISOPLUS-264
0.35°C/W - i4-PAC
1.50°C/W - Power SIP
37 - ISOPLUS-264
Metallized, external, Direct Copper Bond (DCB) surface
for heat sink applications
for heat sink applications
ayay
s
sink
sink
)
ut
p
t and ut
pu
t and
Mt
M
e
t
a
1-Form-B
Unidirectional
1-Form-A
Unidirectional
1-Form-A
Bidirectional
Dual 1-Form-A
Bidirectional
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 15
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Optically Isolated Power Relays
Optically Isolated Power Relays
• 1-FORM-A POWER RELAYS: SINGLE-POLE - UNIDIRECTIONAL
• 1-FORM-A POWER RELAYS: SINGLE-POLE - BIDIRECTIONAL
Part Number Relay
Type
Blocking
Voltage
(VP)
Load Current
(A)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 16)
Features & Comments
Without
Heat Sink
5ºC/W
Heat Sink
TC=25ºC
CPC1706Y UNI 60 4 - - 0.09 5 5 / 2 2500 1 36
CPC1708J UNI 60 4 11.85 24 0.08 10 20 / 5 2500 1 29
CPC1709J UNI 60 9 22.8 32 0.05 10 20 / 5 2500 1 37
CPC1718J UNI 100 6.75 17.5 32 0.075 10 20 / 5 2500 1 37
CPC1726Y UNI 250 1 - - 0.75 10 5 / 2 2500 1 36
CPC1727J UNI 250 3.4 8.6 20 0.09 10 20 / 5 2500 1 37
CPC1777J UNI 600 1.5 4.6 15 0.5 10 20 / 5 2500 1 29
CPC1779J UNI 600 1.65 4.12 15 0.4 10 20 / 5 2500 1 37
CPC1786J UNI 1000 0.65 1.75 6.9 2 10 20 / 5 2500 1 29
CPC1788J UNI 1000 1 2.45 10.3 1.25 10 20 / 5 2500 1 37
CPC2907B BI 60 2 - - 0.15 5 2.5 / 0.25 4000 1 66 DUAL Power Relay
• DUAL 1-FORM-A POWER RELAY: BIDIRECTIONAL
CPC1705Y UNI 60 3.25 - - 0.09 5 2 / 12 2500 1 36 Normally CLOSED Power Relay
• 1-FORM-B POWER RELAY: SINGLE-POLE - UNIDIRECTIONAL
NEW!
NEW!
Part Number Relay
Type
Blocking
Voltage
(VP)
Load Current
(Arms)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
(Vrms)
Off-State
Leakage
(μA)
Package
Type
(Page 16)
Features & Comments
Without
Heat Sink
5ºC/W
Heat Sink
TC=25ºC
CPC1906Y BI 60 2 - - 0.3 10 10 / 5 2500 1 36
CPC1907B BI 60 6 - - 0.06 5 5 / 1 5000 1 66 Enhanced isolation voltage
CPC1908J BI 60 3.5 8.5 15 0.3 10 20 / 5 2500 1 29
CPC1909J BI 60 6.5 15 15 0.1 10 25 / 10 2500 1 37
CPC1916Y BI 100 2.5 - - 0.34 10 5 / 3 2500 1 36
CPC1918J BI 100 5.25 13 15 0.1 10 25 / 10 2500 1 37
CPC1926Y BI 250 0.7 - - 1.4 10 10 / 10 2500 1 36
CPC1927J BI 250 2.7 6.7 15 0.2 10 25 / 10 2500 1 37
CPC1967J BI 400 1.35 3.35 13.15 0.85 10 20 / 5 2500 1 29
CPC1968J BI 500 2 5 15 0.35 10 20 / 5 2500 1 37
CPC1973Y BI 400 0.35 - - 5 10 5 / 3 2500 1 36
CPC1977J BI 600 1.25 3.1 12.25 1 10 20 / 5 2500 1 29
CPC1978J BI 800 0.75 1.85 7.25 2.3 10 20 / 5 2500 1 29
CPC1979J BI 600 1.4 3.5 14.5 0.75 10 25 / 5 2500 1 37
CPC1981Y BI 1000 0.18 - - 18 10 10 / 5 2500 1 36
CPC1983B BI 600 0.5 - - 6 5 5 / 2 5000 1 66 Enhanced isolation voltage
CPC1983Y BI 600 0.5 - - 6 5 5 / 2 2500 1 36
CPC1983YE BI 600 0.5 - - 6 5 5 / 2 4000 1 36 Enhanced isolation voltage
CPC1986J BI 1000 0.65 1.6 6.5 3 10 20 / 5 2500 1 29
CPC1988J BI 1000 0.9 2.25 9.4 2.5 10 20 / 5 2500 1 37
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
16 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Optically Isolated AC Power Switches
Optically Isolated AC Power Switches
Features:
• Load current up to 1Arms
• Blocking voltage up to 800VP
• 5mA input sensitivity
• Zero-cross turn on ≤ ½ Cycle
• Low EMI and RFI generation
• DC control, AC switching
• Optically isolated
• TTL and CMOS compatible
• High noise immunity
• Machine insertable, wave solderable
ZC
Zero-Cross Turn-On
• Contactors
• Solenoids
• Motor controls
• Heater controls
Applications:
• Programmable controls
•Process control
• Power control panels
• Remote switching
• Gas pump electronics
• Large relay control circuits
• OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT ≤1A
OPTICALLY ISOLATED AC POWER SWITCHES
2
14
16
22
12
15
20
23
4-Pin DIP (16-Pin Body)
6-Pin DIP
6-Pin Power DIP Surface Mount
8-Pin Surface Mount
6-Pin Surface Mount
6-Pin Power DIP
8-Pin DIP
4-Pin SIP (8-Pin Body)
6-Pi
n DI
P
6-Pi
n Po
wer
DIP
8
-
Pi
n
DI
P
•
Blocking voltage from 400VP to 800VP
•
SCR-based AC power switches
•
Maximum load current up to 1Arms
Part Number Blocking
Voltage
(VP)
Load
Current
(Arms)
Input
Control
Current
(mA)
Operating
Frequency
Min / Max
(Hz)
Isolation
Voltage
(Vrms)
Package
Type
CPC1943 400 0.5 5 20 - 500 3750 15, 16
CPC1945G 400 1 5 20 - 400 3750 2
CPC1945Y 400 1 5 20 - 400 3750 23
CPC1961 Dual 600 0.25 15 20 - 500 3750 20, 22
CPC1963 600 0.5 5 20 - 500 3750 15, 16
CPC1965G 600 1 5 20 - 400 3750 2
CPC1965Y 600 1 5 20 - 400 3750 23
CPC1972 800 0.25 5 20 - 500 3750 12, 14
PD1201 400 1 5 20 - 500 3750 2
PD2401 500 1 5 20 - 500 3750 2
PD2601 600 1 5 20 - 500 3750 2
PM1204 400 0.5 5 20 - 500 3750 15, 16
PM1205 500 0.5 5 20 - 500 3750 15, 16
PM1206 600 0.5 5 20 - 500 3750 15, 16
PS1201 400 1 5 20 - 500 3750 23
PS2401 500 1 5 20 - 500 3750 23
PS2601 600 1 5 20 - 500 3750 23
1 Maximum continuous load current of a single pole or the sum of the load currents with both poles operating simultaneously.
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 17
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Optically Isolated AC Power Switches
Optically Isolated AC Power Switches
• OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT >1A
64 - SuperSIP 66 - Power SOIC
36 - Power SIP
29 - i4-PAC
29 - i4-PAC
64 - SuperSIP
Rapid turn-on (non-zero-cross)
Rapid turn-on devices turn on when the control input goes true regardless of
the phase of the load voltage, and turn off when the load voltage crosses zero.
*
*
*
• Blocking voltages of 600VP and 800VP
• SCR-based AC power switches
• Zero-cross and Rapid turn-on (non-zero-cross) versions
*
Metallized, external, Direct Copper Bond (DCB) surfaceMetallized, external, Direct Copper Bond (DCB) surface
for heat sink applicationsfor heat sink applications
*
*
Part
Number
Blocking
Voltage
(VP)
Load Current Input
Control
Current
(mA)
Input
Control
Voltage
(V)
Operating
Frequency
Min / Max
(Hz)
Turn-On:
Zero-Cross
or
Rapid
Switching
Speed
ton / toff
(max)
Isolation
Voltage
(Vrms)
Package
Type
Features
No
Heat Sink
(Arms)
5ºC/W
Heat Sink
(Arms)
TC=25ºC
(Arms)
CPC1964B 800 1.5 - - 5 - 20 - 500 Zero-Cross ½ Cycle 5000 66 Enhanced isolation voltage, 12.5mm creepage
CPC1964BX6 600 1.5 - - 5 - 20 - 500 Rapid 500μs / ½ Cycle 5000 66 Rapid turn-on, enhanced isolation voltage
CPC1966 600 3 - - 5 - 20 - 500 Zero-Cross ½ Cycle 3750 36
CPC1966B 800 3 - - 5 - 20 - 500 Zero-Cross ½ Cycle 5000 66 Enhanced isolation voltage, 12.5mm creepage
CPC1966BX8 800 2 - - 5 - 20 - 500 Rapid **45μs / ½ Cycle 3750 66 Rapid turn-on, 5.7mm creepage
CPC1966YX6 600 3 - - 5 - 20 - 500 Rapid 500μs / ½ Cycle 3750 36 Rapid turn-on
CPC1966YX8 800 1.75 - - 5 - 20 - 500 Rapid **45μs / ½ Cycle 3750 36 Rapid turn-on
CPC1976 600 2 - - 5 - 20 - 500 Zero-Cross ½ Cycle 3750 36
CPC1976YX6 600 2 - - 5 - 20 - 500 Rapid 500μs / ½ Cycle 3750 36 Rapid turn-on
CPC1998J 800 5 20 50 5 - 20 - 500 Zero-Cross ½ Cycle 2500 29 High load current
CPC40055ST 800 5 20 40 5 - 20 - 500 Zero-Cross ½ Cycle 2500 64 High load current, 9.5mm creepage
** Typical turn-on values.
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
18 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Multifunction Products: SSR/Optocouplers
Multifunction Products: SSR/Optocouplers
ABCD
EFG
22
8-Pin Surface Mount
21
8-Pin Flatpack
20
8-Pin DIP
4
16-Pin Low-Profi le SOIC
Features:
• 3750Vrms input-to-output isolation
• Multiple functionality in a single package
• Current limiting (part numbers with “L” suffi x)
• Machine insertable, wave solderable
• TTL and CMOS compatible
Applications:
• Telecommunication/datacommunication
• Instrumentation
• I/O subsystems/electronic switching
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
The OptoMOS line of Multifunction Products combines a number of discrete, optically isolated functions into a single package. These products mix and match solid state relays,
optocouplers, and Darlington transistors to create highly functional circuits in a single, small package. Multifunction devices allow designers to consolidate circuit functions into
a single device, thus freeing up valuable board space and reducing component count.
MULTIFUNCTION PRODUCTS: SSR/OPTOCOUPLERS
• GENERAL PURPOSE MULTIFUNCTION PRODUCTS (TELECOM MULTIFUNCTION PRODUCTS - PAGE 43)
Part
Number
Style SSR Characteristics Optocoupler Characteristics Isolation
Voltage
(Vrms)
Package
Type
Features and Comments
Blocking
Voltage
(VP)
Current
Handling
(mA)
On
Resistance
(Ω)
Input
Control
Current
(mA)
Breakdown
Voltage
(V)
Current
Transfer
Ratio
(%)
Saturation
Voltage
(V)
Input
Control
Current
(mA)
IAA110 B 350 100 35 5 20 33 0.5 6 3750 4 Two 1-Form-A relays, one optocoupler
IAB110 C 350 100 35 5 20 33 0.5 6 3750 4 One 1-Form-A relay, one 1-Form-B relay, one optocoupler
IAD110 A 350 100 35 5 20 33 0.5 6 3750 4 One 1-Form-A relay, two optocouplers
IBB110 D 350 100 35 5 20 33 0.5 6 3750 4 Two 1-Form-B relays, one optocoupler
TS117 E 350 120 35 2 20 33 0.5 6 3750 20, 21, 22 One 1-Form-A relay, one optocoupler
TS117L E 350 120 35 2 20 33 0.5 6 3750 20, 21, 22 One current-limiting 1-Form-A relay, one optocoupler
TS118 F 350 120 35 5 20 33 0.5 6 3750 20, 21, 22 One 1-Form-B relay, one optocoupler
TS120 G 350 120 35 5 20 300 0.8 2 3750 20, 21, 22 One 1-Form-A relay, one darlington optocoupler
TS190 E 400 150 22 5 20 33 0.5 6 3750 20, 21, 22 One 1-Form-A relay, one optocoupler
TS190L E 400 150 25 5 20 33 0.5 6 3750 21 One current-limiting 1-Form-A relay, one optocoupler
XS170 E 350 100 50 2 20 33 0.5 6 3750 20, 22 One 1-Form-A relay, one optocoupler
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 19
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Field Effect Transistors
Field Effect Transistors
N-Channel Depletion Mode MOSFET as Pre-Regulator
Voltage
Regulator VDC
VAC
Features:
• Normally on depletion mode devices offer low RDS(on) at cold temperatures
• Low on-resistance
• High input impedance
• Low VGS(off) voltage
Applications:
• Power fail switches
• Discrete normally closed relays
• Constant current, high brightness LED drivers
• High voltage pre-regulators
• Power inverters
• Power supplies
FIELD EFFECT TRANSISTORS
•
Normally on MOSFETs present low resistance with no power applied
•
Ideal for security applications
•
IGBT speed enhancement
•
LED drivers
SOT-223
SOT-89
SOT-23
See Application Note AN-500
“Depletion-Mode Power MOSFETs and Applications”
• N-CHANNEL DEPLETION MODE FETS
Part Number V(BR)DSX
(V)
ID
Min (mA)
RDS(on)
Max (Ω)
VGS(off)
Min (V)
VGS(off)
Max (V)
Package Type Features & Comments
CPC3701 60 600 1 -1.4 -3.1 SOT-89
CPC3703 250 360 4 -1.6 -3.9 SOT-89
CPC3708 350 130 14 -2 -3.6 SOT-89, SOT-223
CPC3710 250 220 10 -1.6 -3.9 SOT-89
CPC3714 350 240 14 -1.6 -3.9 SOT-89
CPC3720 350 130 22 -1.6 -3.9 SOT-89
CPC3730 350 140 35 -1.6 -3.9 SOT-89
CPC3902 250 400 2.5 -1.4 -3.1 SOT-89, SOT-223
CPC3909 400 300 6 -1.4 -3.1 SOT-89, SOT-223
CPC3960 600 100 44 -1.4 -3.1 SOT-223
CPC3980 800 100 45 -1.4 -3.1 SOT-223
CPC3982 800 20 380 -1.4 -3.1 SOT-23 Very small package
CPC5602 350 130 14 -2 -3.6 SOT-223 Designed for use with LITELINK designs
CPC5603 415 130 14 -2 -3.6 SOT-223 Designed for use with LITELINK designs
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
20 For data sheets, go to www.ixysic.com/Products/ProdList.htm
IGBT & MOSFET Gate Drivers
IGBT & MOSFET Gate Drivers
• LOW-SIDE GATE DRIVERS
Features:
• 1.5A to 30A peak source/sink drive current
• Wide operating voltage range: 4.5V to 35V
• -40°C to +125°C extended operating temperature range
• Logic input withstands negative swing of up to -5V
• Matched rise and fall times
• Low propagation delay time
• Low 10μA supply current
• Low output impedance
Applications:
• Effi cient power MOSFET and IGBT switching
• Switch mode power supplies
• Motor controls
• DC to DC converters
• Class-D switching amplifi ers
• Pulse transformer driver
20
8-Pin DIP
8
-
Pin
DI
P
53
8-Pin Power SOIC
54
8-Pin SOIC
56
8-Pin DFN
57
5-Pin TO-220
58
5-Pin TO-263
IXD_604SI & SIA, IXD_609SI, and IXD_614SI
are AEC-Q100 qualifi ed!
NEW!
NEW!
AEC-Q100 Qualifi ed Low-Side Gate Drivers
EN
IN OUT
IN OUT IN OUT
INA
INB
AOUTA
OUTB
B
INA
INB
OUTA
OUTB
B
AINA
INB
OUTA
OUTB
A
B
ENB
INB
OUTA
OUTB
A
B
ENA
INA
FIND
IGBT & MOSFET GATE DRIVERS
NEW!
NEW!
Part
Number
Output
Type
IPEAK
TC=25ºC
(AP)
Output
Resistance
(Ω)
Available
Logic
Confi gurations
Enable
Function
Under-voltage
Lockout
(V)
Package Type
IX4340 DUAL 5 1.5 D •VCC < 3.8 53, 54
IX4423 DUAL 3 4 I --54
IX4424 DUAL 3 4 N --54
IX4424G DUAL 3 4 N --20
IX4425 DUAL 3 4 F --54
IX4426 DUAL 1.5 8 I -- 54, 56
IX4427 DUAL 1.5 8 N -- 54, 56
IX4428 DUAL 1.5 8 F -- 54, 56
IXD_602 DUAL 2 4 F, I, N -- 20, 53, 54, 56
IXD_604 DUAL 4 2.5 F, I, N, D •- 20, 53, 54, 56
IXD_609 SINGLE 9 1 I, N, D •- 20, 53, 54, 56, 57, 58
IXD_614 SINGLE 14 0.8 I, N, D •- 20, 53, 57, 58
IXD_630 SINGLE 30 0.4 I, N, D •VCC < 12.5 57, 58
IXD_630M SINGLE 30 0.4 I, N, D •VCC < 9 57, 58
Part
Number
Output
Type
IPEAK
TC=25ºC
(AP)
Output
Resistance
(Ω)
Available
Logic
Confi gurations
Enable
Function
Package
Type
IXD_604SI DUAL 4 2.5 F, I, N, D •53
IXD_604SIA DUAL 4 2.5 F, I, N, D •54
IXD_609SI SINGLE 9 1 I, N, D •53
IXD_614SI SINGLE 14 0.8 I, N, D •53
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 21
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IGBT & MOSFET Gate Drivers
IGBT & MOSFET Gate Drivers
• 600V HIGH-SIDE & LOW-SIDE GATE DRIVER: IX2113
Level
Shift
VDD / VCC
VSS / COM
LS Delay
Control
Level
Shift
VDD / VCC
VSS / COM
UVLO
High
Voltage
Level
Shift
UVLO
Pulse
Generator R
R
S
QBuffer
VDD
HIN
SD
LIN
VSS
VB
HO
VS
VCC
LO
COM
Input Control Logic
&
Cycle-by-Cycle
Edge-Triggered
Shutdown
Buffer
IX2113
Features:
• Floating channel for bootstrap operation up to 600V with an
absolute maximum rating of 700V
• Outputs capable of sourcing and sinking 2A
• Gate drive supply range from 10V to 20V
• Tolerant to negative voltage transients: dV/dt immune
• 3.3V logic compatible
• Under-voltage lockout for both high-side and low-side outputs
• Matched propagation delays
•
High-side channel can drive an N-channel power MOSFET or IGBT 600V from the common reference
•
Configured with independent high-side and low-side referenced output channels
• HIGH VOLTAGE HALF-BRIDGE GATE DRIVER: IX21844
Applications:
• Switch mode power supplies
• Motor driver inverters
• DC/DC converters
• Uninterruptable power supplies (UPS)
IX21844 Typical Application
Features:
• Floating channel for bootstrap operation to 600V with
an absolute maximum rating of 700V
• Outputs can source 1.4A and sink 1.8A
• Gate drive supply range from 10V to 20V
• Tolerant to negative voltage transients: dV/dt immune
• 3.3V and 5V logic compatible
• Under-voltage lockout for both high-side and low-side outputs
• Matched propagation delays
•
Programmable dead-time can be set between 400ns and 5ms
•
Floating high-side channel can drive an N-channel power MOSFET or IGBT 600V from the common reference
VCC VCC
IN IN
DT
VSS VSS
COM
LO
VS
VB
HO
LOAD
up to 600V
SD SD
RDT
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
22 For data sheets, go to www.ixysic.com/Products/ProdList.htm
IGBT & MOSFET Gate Drivers
IGBT & MOSFET Gate Drivers
VCC
IN
FAULT
COM
VB
HO
VS
CS
Buffer
Comparator
Delay
Undervoltage Lockout
Data LatchTransmitter
High-Low
Level Shift
Low-High
Level Shift ReceiverTransmitterData Latch
Receiver
Low Side High Side
QR
S
Enable
Enable
Blanking
Signal
+
_
• 600V HIGH SIDE IGBT & MOSFET GATE DRIVER: IX2127
•
Stable operation in high dV/dt noise environments
•
Outputs typically source 250mA and sink 500mA
Features:
• Floating channel designed for bootstrap operation up to 600V
• Tolerant to negative transient voltages; dV/dt immune
• Under-voltage lockout
• 3.3V, 5V, and 12V input logic compatible
• Open-drain FAULT indicator pin shows over-current shutdown
• Output in Phase with the Input
Applications:
• High speed gate driver
• Motor drive inverter
IX2127
8-Pin SOIC
8-Pin DIP
8
-
Pi
n
DIP
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 23
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IGBT & MOSFET Gate Drivers
IGBT & MOSFET Gate Drivers
• 2.5A OUTPUT OPTICALLY COUPLED GATE DRIVER: IX3120
Applications:
• Isolated IGBT/MOSFET gate drive
• Switch mode power supplies
• Industrial inverters
• Motor drivers
ANODE
CATHODE
VCC
VO
VEE
N/C
N/C
VO
2
3
1
4
7
6
8
5
IX3120
• 2.5A OUTPUT HI SPEED GATE DRIVER OPTOCOUPLER: IX3180
ANODE
CATHODE
VCC
VO
VEE
N/C
N/C
VO
2
3
1
4
7
6
8
5
IX3180
•
2.5A maximum peak output current
•
Wide operating voltage range: 15V to 30V
Ideally suited for use in motor control and inverter applications due to its low input
LED current, high output peak current, and high noise immunity (25kV/μs).
Features:
• 25kV/µs minimum common-mode rejection (CMR) at 1500VCM
• Under-voltage lockout with hysteresis
• 3750Vrms input-to-output isolation
• Wide temperature range: -40°C to +100°C
Applications:
• High performance DC/DC converters
• High performance switching power supplies
• Motor control inverter applications
• Motor drivers
Features:
• 200ns maximum propagation delay over temperature range
• 20ns typical pulse width distortion
• 10kV/µs minimum common-mode rejection (CMR) at 1500VCM
• Wide operating voltage range: 10V to 20V
• Under-voltage lockout with hysteresis
• 3750Vrms input-to-output isolation
• Wide temperature range: -40°C to +100°C
•
2.5A maximum peak output current
•
Wide operating voltage range: 10V to 20V
• 1200V HIGH AND LOW SIDE GATE DRIVER: IX2120
•
Floating Channel for Bootstrap Operation to +1200V
•
Outputs Capable of Sourcing and Sinking 2A
Features:
• Gate Drive Supply Range From 15V to 20V
• Enhanced Robustness due to SOI Process
• Tolerant to Negative Voltage Transients: dV/dt Immune
• 3.3V Logic Compatible
• Undervoltage Lockout for Both High-Side and Low-Side Outputs
Level
Shift
VDD / VCC
VSS / COM
LS Delay
Control
Level
Shift
VDD / VCC
VSS / COM
UVLO
High
Voltage
Level
Shift
UVLO
Pulse
Generator
C
R
S
QBuffer
VDD
HIN
SD
LIN
VSS
VB
HO
VS
VCC
LO
COM
Input Control
Logic
&
Cycle-by-Cycle
Edge-Triggered
Shutdown
Buffer
Mid
Voltage
Level
Shift
VBM
VSM
IX2120 Functional Block Diagram
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
24 For data sheets, go to www.ixysic.com/Products/ProdList.htm
IGBT & MOSFET Gate Drivers
IGBT & MOSFET Gate Drivers
Features:
• No external IC power supply
• Low drive power requirements (TTL/CMOS compatible)
• Load voltages up to 200V
• Fast switching times - 40μsec on, 400μsec off
Applications:
• Instrumentation
• Multiplexers
• I/O subsystems
• Meters (Watt-Hour, water, gas)
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
CPC1590 Application Diagram
Part Number Input Control Current
(mA)
Gate Voltage @ IF=5mA
(VG)
Blocking Voltage
(VP)
Regulated Capacitor Voltage
(VCAP-MAX)
Switching Speeds
ton / toff (μs)
Isolation Voltage
(Vrms)
CPC1580 2.5 7.5 - 12 65 VDS - 0.2V 40 / 400 3750
CPC1590 2.5 7.5 - 12 200 16 40 / 400 3750
• OPTICALLY ISOLATED LOAD-BIASED GATE DRIVERS
8-Pin Flatpack
•
High speed, optically isolated gate driver ICs
•
Output driver powered from load voltage; no external power supply required
•
On-chip circuitry charges an external capacitor whose charge enables fast turn-on
Part Number Input Control Current
(mA)
Nominal Open-Circuit
Voltage VOC (V)
Nominal Short-Circuit
Current ISC (μA)
Switching Speeds
ton / toff (ms)
Isolation Voltage
(Vrms)
Package Type
FDA215 5 5.5 2.5 5 / 5 3750 8-pin DIP, 8-pin surface mount
FDA217 5 11.75 4.5 2 / 0.5 3750 8-pin DIP, 8-pin surface mount
• OPTICALLY ISOLATED PHOTOVOLTAIC GATE DRIVERS
Input Output
Input Output
PV
PV
Features:
• Isolated 5.5V to 12V photovoltaic output
• Floating outputs for parallel or series confi guration
Applications:
• MOSFET driver
• Isolated fl oating power source
8-Pin Surface Mount
8-Pin DIP
8
-
Pin
DIP
•
Dual optically isolated photovoltaic devices
•
Well suited for use in discrete solid state relay designs
2
3
1
4
NC
NC
8
5
6
7
CAP
+VLOAD
G
-VLOAD
CST
A
B
RLED
VIN
LOAD
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 25
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Part
Number
Number of
Channels
Channel
On-Resistance
(Ω)
Bleed
Resistors
(kΩ)
Clock
Frequency
(MHz)
Turn-On
Time
(μs)
Turn-Off
Time
(μs)
Package
Type
CPC7220 8 20 - 5 5 5 50, 51
CPC7232 8 21 20 - 50 5 5 5 50, 51
CPC7601 16 25 - 8 5 5 50
CPC7701 16 25 20 - 50 8 5 5 50
D
CL
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
LE
V
NN
V
PP
L0
L7
L1
L2
L3
L4
L5
L6
LATCHES
8-BIT
SHIFT
REGISTER
SWITCHES
LEVEL
SHIFTERS
D
IN
CLK
D
OUT
SW0
SW1
SW2
SW3
SW4
SW5
SW6
SW7
V
NN
V
PP
CL
D
IN
CLK
D
OUT
8-BIT
SHIFT
REGISTER LATCHES OUTPUT
SWITCHES
LE
RGND
SW0
CL
D
LE
SW1
CL
D
LE
SW2
CL
D
LE
SW3
CL
D
LE
SW4
CL
D
LE
SW5
CL
D
LE
SW6
CL
D
LE
SW7
CL
D
LE
LEVEL
SHIFTERS
D
CL
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
CL
D
LE
SW0
SW1
SW2
SW3
SW4
SW5
SW6
SW15
CL
LE
V
NN
V
PP
L0
L15
L1
L2
L3
L4
L5
L6
LATCHES
16-BIT
SHIFT
REGISTER
SWITCHES
LEVEL
SHIFTERS
D
IN
CLK
D
OUT
V
NN
V
PP
CL
D
IN
CLK
D
OUT
16-BIT
SHIFT
REGISTER
LATCHES OUTPUT
SWITCHES
LE
RGND
SW0
CL
D
LE
SW1
CL
D
LE
SW2
CL
D
LE
SW3
CL
D
LE
SW4
CL
D
LE
SW5
CL
D
LE
SW6
CL
D
LE
SW15
CL
D
LE
LEVEL
SHIFTERS
CPC7220 CPC7232 CPC7601 CPC7701
Features:
• Flexible high voltage supplies up to VPP - VNN=200V
• Output switch on-resistance typically 20Ω
• Low charge injection, low capacitance analog switches
Applications:
• Piezoelectric transducer drivers
• Ultrasound imaging
• Printers
• Industrial controls and measurement
• Very low quiescent current: 30nA typical
• -58dB off-isolation at 5MHz
• Internal bleed resistors: CPC7232 & CPC7701
50
48-Pin LQFP
8 Switches
16 Switches
• HIGH VOLTAGE ANALOG SWITCH ARRAYS
28-Pin PLCC
51
HIGH VOLTAGE PRODUCTS
High Voltage Products
High Voltage Products
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
26 For data sheets, go to www.ixysic.com/Products/ProdList.htm
High Voltage Products
High Voltage Products
• HIGH VOLTAGE ISOLATED ANALOG SWITCHES
VDD = 3.3V
Channel 1-2
S1
S2
S2*
S1*
S1B
S2B
S2A
S1A
TSD1
LATCH1
IN1
IN2
Channel 1-2
Switch
Control
Logic
L
A
T
C
H
1
Channel 3-4
S3
S4
S4*
S3*
S3B
S4B
S4A
S3A
TSD2
LATCH2
IN3
IN4
Channel 3-4
Switch
Control
Logic
L
A
T
C
H
2
* ±320V
Features:
• Low, matched RON
• Switch voltage up to ±320V
• 320V logic-input-to-switch-output isolation
• 110dB switch-to-switch isolation at 5kHz
• Flexible switch confi gurations
• Smart logic for power-up/hot-plug state control
• 3.3V operation with very low power consumption
• Switch current limiting protects against fault conditions
• Thermal shutdown protects against fault conditions
• Latched TTL logic level inputs
• Clean, bounce-free switching
• Monolithic IC reliability
3.3V Supply!
3.3V Supply!
Applications:
• Instrumentation
• Industrial controls and monitoring
• Automatic test equipment (ATE)
• Battery charging circuits
• Telephony
VoIP gateways
Central offi ce (CO) and remote terminal (RT)
Concentrators
PBX systems
Optical network terminals (ONT)
Optical network units (ONU)
Hybrid fi ber coax (HFC)
CPC7514: 320V Quad High Voltage Isolated Analog Switch Array
CPC7514
20-Pin SOIC
2
0-Pin SOI
C
•
Provides single-ended or differential access to high voltage networks
•
Self-biasing - no external high-voltage supplies required
CPC7524: 600V Quad High Voltage Isolated Analog Switch Array
•
Provides flexible single-ended or differential access to high voltage networks
•
Configured as two sets of matched, paired switches for improved differential performance
Features:
• Switch voltage up to 600V
• 110dB switch-to-switch isolation at 5kHz
• Flexible switch confi gurations
• Smart logic for power-up/hot-plug state control
• 3.3V operation with very low power consumption
• Switch current limiting and thermal shutdown
protect against fault conditions
• TTL logic-level Inputs
• Input latch
• Matched RON
• Clean, bounce-free switching
• Monolithic IC reliability
• 28-pin SOIC package
Applications:
• Instrumentation
• Industrial controls and monitoring
• Automatic test equipment (ATE)
• Battery monitoring and charging circuits
• Worldwide AC mains monitor
DGND
VDD = 3.3V
CHANNEL 1-2
S1
S2
S2*
S1*
S1B
S2B
S2A
S1A
TSD1-2
LATCH1-2
IN1
IN2
Channel 1-2
Switch
Control
Logic
L
A
T
C
H
1-2
CHANNEL 3-4
S3
S4
S4*
S3*
S3B
S4B
S4A
S3A
TSD3-4
LATCH3-4
IN3
IN4
Channel 3-4
Switch
Control
Logic
L
A
T
C
H
3-4
* ±600V
GND2
CPC7524
3.3V Supply!
3.3V Supply!
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 27
For data sheets, go to www.ixysic.com/Products/ProdList.htm
High Voltage Products
High Voltage Products
Features:
• Low, matched RON
• Guaranteed break-before-make (BBM)
• Switch voltage up to ±320V
• 60dB off-isolation at 1MHz
• Smart logic for power-up/hot-plug state control
• 5V operation with very low power consumption
• Thermal shutdown protects against fault conditions
• Latched TTL logic level inputs
Applications:
• Instrumentation
• Industrial controls and monitoring
• Multiplexed ultrasonic transducer switching
• Automatic test equipment (ATE)
• Battery monitoring and charging
CPC7512: 320V Dual Shunt-Isolated High Voltage High Frequency Analog Switch
S1B
S1C
S1COM
S1A
TSD
LATCH1
S1Sel0
S1Sel1
Switch 1
Control
Logic
L
A
T
C
H
S2B
S2C
S2COM
S2A
LATCH2
Switch 2
Control
Logic
L
A
T
C
H
S2Sel0
S2Sel1
SW1ASW1B
SW1C
SW2ASW2B
SW2C
CPC7512
20-Pin SOIC
2
0-Pin SOI
C
•
Provides single-ended or differential access to high voltage networks
•
Self-biasing - no external high-voltage supplies required
Frequency
1kHz 10kHz 100kHz 1MHz 10MHz 100MHz
Transfer Gain (dB)
-140
-120
-100
-80
-60
-40
-20
0
Cross Talk into 50Ω
Frequency (Hz)
1.0E+03 1.0E+04 1.0E+05 1.0E+06 1.0E+07 1.0E+08
Transfer Gain (dB)
-140
-120
-100
-80
-60
-40
-20
0
Open Circuit Transfer Gain into 50Ω
Frequency
1kHz 10kHz 100kHz 1MHz 10MHz 100MHz 1GHz
Loss (dB)
10
8
6
4
2
0
Insertion Loss Into 50Ω
VM
+
VS50Ω
+20 log VS
VM
Insertion Loss = AB
COpen Circuit =
+20 log VM
VS
VM
+
VS50Ω
AB
C
Crosstalk =
+20 log VM
VS
VM
+
50Ω
VS
Open
Open
AB
C
AB
C
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
28 For data sheets, go to www.ixysic.com/Products/ProdList.htm
High Speed Digital Optical Isolators
High Speed Digital Optical Isolators
HIGH SPEED DIGITAL OPTICAL ISOLATORS
Applications:
• Power-over-Ethernet (POE)
• I2C bus length extender
• Isolated control and signal monitoring
• Power supply high-side interface
• I2C logic level translation
CPC5903 Features:
• Bidirectionally buffers SDA I2C signal
• Side A extends and isolates I2C interfaces
• Standard-mode and fast-mode I2C
• Side B fast-mode compliant: VDDB > 4.5V
• Operates on 2.7V to 5.5V
• No internal clock - low EM & RF generation
• Voltage level translation
• Slew-limited drivers reduce EMI
• Power down to Hi-Z does not load I2C bus
• 3750Vrms galvanic isolation
•
•
No internal clock - minimal EM & RF emissions
No internal clock - minimal EM & RF emissions
•
•
Immune to external EMI and RFI
Immune to external EMI and RFI
•
•
High voltage isolation
High voltage isolation
• OPTICALLY ISOLATED I²C BUS REPEATERS: CPC5902 & CPC5903
CPC5903
CPC5903
Optical
Isolation
Barrier
I2C
Master
I2C
Slave
I2C
Slave
I2C
Slave
SCL_A
SDA_A
SCL_B
SDA_B
VDDA VDDA
VDDA VDDB
VDDB VDDB
GNDAGNDB
CPC5902
Optical
Isolation
Barrier
I2C
Master
I2C
Slave
I2C
Master
I2C
Slave
SCL_A
SDA_A
SCL_B
SDA_B
VDDA VDDA
VDDA VDDB
VDDB VDDB
GNDAGNDB
CPC5902
CPC5902 Features:
• Bidirectionally buffers both I2C signals
• Extends and isolates I2C interfaces
• Supports standard and fast mode I2C (400kbps)
• Side B fast-mode compliant: VDDB > 4.5V
• Supports I2C clock stretching
• Operates on 2.7V to 5.5V
• Supports DC logic level buffering without refresh
• Glitch-free operation
• Power down to Hi-Z does not load I2C bus
• Slew-limited drivers reduce EMI
•
CPC5902 bidirectionally buffers clock and data signals
•
CPC5903 bidirectionally buffers data signal, unidirectionally buffers clock signal
•
Logic level translation for levels as low as 2.7V or as high as 5.5V
•
Passes DC signals - no refresh clock needed - no clock noise generated
See Application Note TB-101
“Optically Isolating an I
2
C Interface”
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 29
For data sheets, go to www.ixysic.com/Products/ProdList.htm
LED
LED
1
2
3
4
8
7
6
5
VDD
OUT1
OUT2
GND
ANO1
CAT1
CAT2
ANO2
10 Mbaud!
10 Mbaud!
• SINGLE-CHANNEL EACH DIRECTION DIGITAL OPTICAL ISOLATOR: CPC5001
• DUAL HIGH SPEED DIGITAL OPTICAL ISOLATOR: CPC5002
Features:
• Isolates one signal in each direction
• Operates from 2.7V to 5.5V
• Buffered inputs - no external LED drive required
• Hysteresis at inputs for noise rejection
• Slew-limited drivers reduce EMI
• 3750Vrms galvanic isolation from input to output
• Power down to Hi-Z Does Not Load Outputs
• 5Mbaud data rate
Applications:
• Isolated signal monitoring and control
• Power-over-Ethernet, POE
• Power supply high-side interface
• Logic level translation
• Microprocessor system interface
• Inter integrated circuit (I2C) interface
• Serial peripheral interface
• Full duplex communication
• Isolated line receiver
• Isolated data acquisition systems
A
GNDA
B
GNDB
VDDA
A
VDDA
CHANNEL2
VDDB
LED INB2
VDDA
OUTA2
A
VDDA
LED
INA1
VDDB
OUTB1
B
B
VDDB
VDDB
CHANNEL1
1
2
3
4
8
7
6
5
CPC5001
CPC5002
•
Logic level translation for levels as low as 2.7V or as high as 5.5V
•
Passes DC signals - no refresh clock needed
Features:
• Dual optics isolate two signals
• Operates over 2.7V < VDD < 5.5V
• Power down to Hi-Z does not load outputs
• Low-power CMOS reduces supply current
• LED drive current only 1.5mA
• High speed: 10Mbaud typical
Applications:
• Isolated line receiver
• Ground loop elimination
• ADC/DAC digital noise isolation
• 4-wire I2C bus isolation
•
3750Vrms galvanic isolation from input to output
•
Passes DC signals - no refresh clock needed
High Speed Digital Optical Isolators
High Speed Digital Optical Isolators
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
30
Optocouplers
Optocouplers
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Features:
• AC and DC compatible inputs
• Machine insertable, wave solderable
Applications:
• Modem switching (laptops, notebooks, PDAs)
• Voltage detection
• TIP/RING circuits
• Ringing detection
• Loop detection
• Current sensing
• Telecom switching
• SINGLE & DUAL OPTOCOUPLERS
Confi gurations
4-Pin SOP
10 6-Pin DIP
14
4
8-Pin DIP
20
8Pin
DI
P
6-Pin Surface Mount
12
8-Pin Surface Mount
22 4-Pin Surface Mount
43
4-Pin DIP
42
•
Single-transistor output or Darlington transistor output for higher current gain
•
Single-LED for unidirectional input signal or dual-LED input for bidirectional input signal
•
Input-to-output isolation: 1500Vrms, 3750Vrms, or 5000Vrms
OPTOCOUPLERS
AB
CD E F
GHI J
KL MN
4-Pin Package
6-Pin Package
8-Pin Package
Part
Number
Minimum
Breakdown
Voltage
(BVCEO)
Typical
Current Transfer
Ratio
(%)
Maximum
Saturation
Voltage
(V)
Input
Control
Current
(mA)
Minimum
Isolation
Voltage
(Vrms)
Package
Type
Confi guration
CPC1001N 30 330 0.3 0.2 1500 10 A
CPC1301 350 5500 1.2 1 5000 42, 43 B
CPC1302 350 5500 1.2 1 3750 20, 22 I
CPC1303 30 1000 0.5 0.2 5000 42, 43 A
LDA100 30 300 0.5 1 3750 12, 14 E
LDA101 30 300 0.5 1 3750 12, 14 C
LDA102 30 350 0.5 1 3750 12, 14 C
LDA110 30 8500 1 1 3750 12, 14 F
LDA111 30 8500 1 1 3750 12, 14 D
LDA200 30 300 0.5 1 3750 20, 22 L
LDA201 30 300 0.5 1 3750 20, 22 K
LDA202 30 300 0.5 1 3750 20, 22 H
LDA203 30 300 0.5 1 3750 20, 22 G
LDA210 30 8500 1 1 3750 20, 22 N
LDA211 30 8500 1 1 3750 20, 22 M
LDA212 30 8500 1 1 3750 20, 22 J
LDA213 30 8500 1 1 3750 20, 22 I
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 31
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Optocouplers
Optocouplers
• LINEAR OPTOCOUPLERS
Part
Number
Servo Gain
K1=I1/IF
(Min - Max)
Forward Gain
K2=I2/IF
(Min - Max)
Transfer Gain
K3=K2/K1
(Min - Max)
Input Control
Current
(mA)
Isolation
Voltage
(Vrms)
Package
Type
LOC110 0.004 - 0.03 0.004 - 0.03 0.668 - 1.179 2 - 10 3750 20, 21, 22
LOC111 0.008 - 0.03 0.006 - 0.03 0.733 - 1.072 2 - 10 3750 20, 21, 22
LOC112 0.004 - 0.03 0.004 - 0.03 0.733 - 1.072 2 - 10 3750 20, 21, 22
LOC117 0.008 - 0.03 0.006 - 0.03 0.887 - 1.072 2 - 10 3750 20, 21, 22
LOC210 0.004 - 0.03 0.004 - 0.03 0.773 - 1.072 2 - 10 3750 4
LOC211 0.008 - 0.03 0.006 - 0.03 0.773 - 1.072 2 - 10 3750 4
– LED
+ LED
C1
A1
C2
A2
C2
A2
C1
A1
– LED
+ LED
– LED
+ LED
C1
A1
C2
A2
LOC21xLOC11x
Features:
• Couples analog & digital signals
• 3750Vrms input-to-output isolation
• Bandwidth >200kHz in photoconductive mode
• Bandwidth 40kHz in photovoltaic mode
• High gain stability
• Low input-to-output capacitance
• Low power consumption
• 0.01% servo linearity
• THD 87dB typical
• Machine insertable, wave solderable
Applications:
• Power supply feedback voltage/current
• Medical sensor interfacing
• Isolation of process control transducers
• Isolated 4-20mA converters
• Digital telephone isolation
Photoconductive Mode:
• Wide bandwidth (>200kHz)
• 8-bit linearity
Photovoltaic Mode:
• 14-bit linearity
• 40kHz bandwidth
Two Fundamental
Operating Confi gurations:
Isolation Amplifi er (Photovoltaic Mode)
4
20
21
22
8-Pin Surface Mount
8-Pin DIP
8-Pin Flatpack
16-Pin SOIC
8-Pi
n DI
P
VOUT
VIN
VCC
I1
IF
I2 = K3I1
LOC110, LOC111
LOC112, or LOC117
1
2
4
8
7
6
5
3
+
–
+
–
•
Input LED drives two photodiodes: (1) isolated output (2) feedback to correct for the input LED’s non-linearity
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
32 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Optocouplers
Optocouplers
Part
Number
Reference
Voltage
(V)
VREF Tolerance Isolation
Voltage
(Vrms)
Package
Type
25ºC
(%)
-40ºC to +85ºC
(%)
-40ºC to +110ºC
(%)
LIA120 1.240 1 2.5 - 3750 8-pin surface mount
LIA130 1.240 1 1.5 - 3750 8-pin DIP, 8-pin surface mount
LIA135 1.299 0.5 1 - 3750 8-pin DIP, 8-pin surface mount
LIA136 1.299 0.5 - 1.5 3750 8-pin DIP, 8-Pin surface mount
8-Pin Surface Mount
8-Pin DIP
• OPTICALLY ISOLATED ERROR AMPLIFIERS
Features:
• Low voltage operation:
1.6V: LIA135 & LIA136
2.7V: LIA120 & LIA130
• Optocoupler, precision reference, and error amplifi er in a single package
• LIA120: 70dB linearity typical
Application:
• SMPS feedback loops
• Power supply feedback
LIA120 LIA130 LIA135 LIA136
GND
COMP
C
LED
FB
E
K
A
GND
COMP
LED
FB
+
_
+
_
GND
COMP
LED
FB
C
E
+
_
+
_
GND
COMP
LED
FB
C
E
B
LIA136
+
_
+
_
+VOUT
VIN
PWM
Control R1
R2
+
COMP
LED
FB
GND
C
E
B
Optical Feedback for Ultra-Low-Voltage Power Supplies
K = Cathode, A = Anode
C = Collector, E = Emitter, B = Base
LED = LED Anode, COMP = Compensation, FB = Feedback, GND = Ground
Low 1.6V Operation!
LIA135 and LIA136
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 33
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Lighting & Display Products
Lighting & Display Products
CPC9909: High Effi ciency, High Brightness Off-Line LED Driver
Features:
• >90% effi ciency
• Stable operation at >50% duty cycle
• Regulated LED current
• Resistor-programmable minimum off-time
• Drives external power MOSFET, enabling high LED output current applications
• Buck or boost confi guration
IX9908: High Voltage, Dimmable LED Driver with PFC Control
Features:
• Single stage, primary control with PFC and dimming features
• >90% effi ciency
• >98% power factor
• Wide operating voltage range: up to 600V
• Digital soft start
• Cycle-by-cycle peak current control
IX9908
Typical Application
SNUBBER
AC
CIN
RIN1
RIN2
DVR
CVR
RCS
Q1
CC
DOUT
COUT
T1
Aux
LEDs
DVCC
CVCC
RZCV1
CZCV
RZCV2
VCC ZCV HV GD
CS
GNDVR
IX9908
+
-
8-Pin SOIC
8-Pin Power SOIC
8 Pin
Power
SOIC
LIGHTING & DISPLAY PRODUCTS
•
Ideal for quasi-resonant flyback LED bulb designs
•
Supports phase-cut dimming and power factor correction
•
Multiple safety features ensure full system protection
•
8V to 550V input voltage range
•
Linear or PWM brightness control inputs
•
Drives multiple LEDs in series/parallel
MXHV9910: High Voltage, Off-Line LED Driver
Features:
• 8V to 450V input voltage range
• >90% effi ciency
• Drives multiple LEDs in series/parallel combinations
• Regulated LED drive current
• Linear or PWM brightness control inputs
• Resistor-programmable oscillator frequency
•
Signage, decorative LED lighting
•
Flat-panel display RGB backlighting
•
DC & AC/DC LED driver applications
NEW! Application Notes:
AN-302: IX9908 Design Considerations (nominal 115Vrms - 60Hz)
AN-303: IX9908 Design Considerations (nominal 230Vrms - 50Hz)
AN-304: IX9908 Design Calculator
• HIGH VOLTAGE LED DRIVERS
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
34 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Lighting & Display Products
Lighting & Display Products
...
...
...
WALK0
TEST1
MODE1
MODE2
CE1
CE2
R/L
SPV
CKV
LEVEL TRANSLATORS
CONTROLLER
SHIFT REGISTER / PULSE GENERATOR
BIT1 BIT2 BIT240
VBIAS
GENERATOR LS/AMP LS/AMP LS/AMP
BUFFER/
DRIVER
BUFFER/
DRIVER
BUFFER/
DRIVER
OG1 OG2 OG240
ESD
DIODES
V
DD
V
EE
V
DD
V
EE
V
DD
V
EE
MXEI2240
Features:
• CMOS technology
• Drives segment or active matrix displays
• 16V to 57V output drive (VDD to VEE)
• Selectable output shift direction and polarity
MXEI2240: 240-Output ePaper Gate Driver
•
Perfect for driving eBook and eReader displays, portable handheld devices, smart cards
•
Output switching modes: one pulse, continuous two pulse, jumping two pulse, no pulse
•
May be cascaded up to four deep
•
Available as gold-bumped die in wafer form or waffle pack
Features:
• 300 output gate driver
• 42V HV output drive capable (VDD to VEE)
• 3.3V logic operation
• Internal pattern generator
• Reset, blanking, polarity inversion
• Bypass function
• Cascadable with bidirectional shift control
IXEP2300: 300-Output ePaper Gate Driver
Applications:
• eBooks & eReaders
• Electronic shelf labels & point-of-purchase displays
• Mobile phones & portable handheld devices
• Smart cards
• Signage
Level Translators & Drivers
Data Inversion & Overwrite
Bidirectional Shift Registers
HV Out
o[1:300]
INV/, BLANK/
HALF
tknl
CK, mode[1:2],
DCR, UP, RST/,
BYPASS
tknr
Pattern Generator
& Control Bias Control
1 300
ON/
IXEP2300
Features:
• +/-15V output driver supply voltage
• Drives segment or active matrix displays
• 3-level gray scale
• 50MHz clock frequency
• Bidirectional data transfer
• 2.7V to 5.5V logic supply voltage
• Cascadable
IXEP1400: 400-Channel ePaper Source Driver
Applications:
• eBooks & eReaders
• Electronic shelf labels & point-of-purchase displays
• Mobile phones & portable handheld devices
• Smart cards
• Signage
IXEP1400
VPOS
VSS2
VNEG
OE
LE
D(7_0)
SHR
CE
CL
RST
OUT1 OUT2 OUT399 OUT400
Clock
Direction
LEVEL SHIFTER/DRIVER
DECODE
LATCH
4x(1-100)
4-way Interleaved
2-bit Register
Stages
Data path when
SHR=1
Data path when
SHR=0
CONTROL LOGIC
VDD
VSS
• EPAPER GATE & SOURCE DRIVERS
•
8-bit data bus inputs four 2-bit words at a time
•
400-bit long, 2-bit wide serial-input parallel-output digital shift register
•
Operating temperature range: -40ºC to +85ºC
•
Available as gold-bumped die in wafer form or waffle pack
•
Internal pattern generator enables minimal controller interface
•
Global blanking and inversion facilitates power-up and power-down
•
Token-passing capability
•
Sleep mode reduces power consumption
•
Available as gold-bumped die in wafer form or waffle pack
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 35
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Lighting & Display Products
Lighting & Display Products
LEVEL SHIFTER / DRIVER
DECODE
LATCH
4-WAY INTERLEAVED
2-BIT REGISTER
STAGES
4 x (1-60) 65-67
DATA PATH WHEN
SHR = 1
WHEN SHR = 0
MODE 240 268
CONTROL LOGIC
OUT267 OUT268OUT1 OUT2
CLOCK
DIRECTION
D(7...0)
SHR
MODE1
MODE0
CE
CL
V
POS
V
SS
V
NEG
OE
LE
61-64
256
MX860
MXEI1480
MXEI1480: ±15V Selectable 400/800 Channel ePaper Source Driver
MX860: ±15V ePaper Source Driver
Features:
• CMOS technology
• ±15V output driver supply voltage
• Drives segment or active matrix displays
• 4-level gray scale
• 25MHz clock frequency
• Bidirectional data transfer
• Selectable register length
• 2.7V to 5.5V logic supply voltage
• Cascadable
Features:
• CMOS technology
• ±15V output driver supply voltage
• Drives segment or active matrix displays
• 4-level gray scale
• 25MHz clock frequency
• Bidirectional data transfer
• Selectable register length
• 2.7V to 5.5V logic supply voltage
LEVEL SHIFTER / DRIVER
DECODE
LATCH
4-WAY INTERLEAVED
2-BIT REGISTER
STAGES
4 x (1-100) 101-120
DATA PATH WHEN
SHR = 1
WHEN SHR = 0
MODE 400 480
CONTROL LOGIC
OUT479 OUT480OUT1 OUT2
CLOCK
DIRECTION
D(7...0)
SHR
MODE
CE
CL
V
POS
V
SS
V
NEG
OE
LE
•
Perfect for driving eBook and eReader displays, portable handheld devices, smart cards
•
Output switching modes: one pulse, continuous two pulse, jumping two pulse, no pulse
•
May be cascaded up to four deep
•
Available as gold-bumped die in wafer form or waffle pack
•
Selectable 240-bit, 256-bit, 268-bit long, 2-bit wide serial-in, parallel-out shift register
•
Level conversion on each output converts 2 digital bits into VPOS, VSS, or VNEG output
•
Available as gold-bumped die in wafer form or waffle pack
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
36 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
TELECOMMUNICATIONS PRODUCTS
The 3kVrms internal isolation barrier exceeds all worldwide regulatory requirements. The LITELINK application circuit is capable of surviving 6kV (10μsec x 700μsec)
lightning surge waveforms making it the most robust silicon DAA on the market.
LITELINK offers the lowest operational phone line quiescent current. The device easily interfaces to commonly available standard single-ended or differential voice and
modem codecs on the market. Contact IXYS Integrated Circuits Division for information on codec reference designs that offer programmable AC termination impedance for
global applications. LITELINK complies with international PSTN agency requirements.
Applications:
• Computer telephony
• VoIP gateways
• PBXs
• Satellite set-top box
• V.92 modems
• Fax machines
• Voice mail systems
• Embedded modems
• Vending machines
• Automated banking
• Remote metering
• Surveillance
• Security systems
Features:
• Voice and data applications
• Modem DAA for speeds up to V.92
• Half-wave or full-wave ringing detection
• Worldwide telephone network compatibility
• Caller-ID reception
• Line side powered from telephone line
• 3.3V to 5V power supply
• Easy interface with modem ICs and
voice codecs
• High power transmit option for
voice applications (>3dBm)
• Small 32-pin SOIC package
• LITELINK™ SILICON DAA PHONE LINE INTERFACE
Part
Number
Isolation
Voltage
(Vrms)
Power
Supply
(V)
Caller ID Ringing Detect
CPC5622 3000 3.3 - 5 Continuous Half-wave & full-wave
CPC5621 3000 3.3 - 5 Selectable (CID=0) Full-wave (CID=1)
CPC5620 3000 3.3 - 5 Selectable (CID=0) Half-wave (CID=1)
TIP
RING
Tx+
Tx-
OH
RING
MODE
RING2
Rx+
Rx-
Ringing Detect Outputs
Transconductance
Stage
2-4 Wire Hybrid
AC/DC Termination
Hook Switch
TX
Gain
Tr i m
RX
Gain
Tr i m
Transmit
Diff.
Amplifier
Receive
Diff.
Amplifier
Transmit
Isolation
Amplifier
Receive
Isolation
Amplifier
Snoop
Amplifier
RX MUX
&
Ringing Det. C
SNOOP
C
SNOOP
R
SNOOP
R
SNOOP
Half Wave
Full Wave
Isolation Barrier
CPC5622
32-Pin SOIC
•
Industry’s only single-package silicon Data Access Arrangement (DAA)
•
Ideal for both voice and data (V.22bis to V.90/V.92) applications in particularly dense circuit environments
•
Internal optical isolation barrier eliminates high-cost transformer or capacitive isolation circuits
•
Saves cost through reduced passive component count and smaller printed circuit board space
•
Available in a thin 32-pin SOIC surface mount package
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 37
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
• VOLTAGE MONITOR DEVICES
CPC5712
•
Special-purpose “Voltage Monitor with Detectors” integrated circuit used in high voltage telephony applications
•
Derives two voltage level detects, polarity information, and a scaled, linear representation of the phone line voltages
•
Non-telephony applications include instrumentation and industrial controls; virtually undetectable in use
Features:
• 2 independent, programmable level-detectors with programmable hysteresis
• Fixed-level polarity detector with hysteresis
• Differential linear output
• Excellent common-mode rejection ratio (CMRR)
• Worldwide telephone network compatibility
• Minimum external components
• High differential input impedance, very low common-mode input impedance
• Fixed gain
• 3V to 5.5V operation
• Low power consumption
• CMOS logic level output (TTL compatible)
Applications:
• VoIP gateways, IP-PBX, xDSL
• TIP/RING monitoring: polarity detection for caller ID, enhanced 911,
line-in-use, battery detection, PSTN check
16-Pin SOP
DET1
DET2
POLARITY
+
-
IN+
IN-
TIP
RING OUT -
OUT+
VCC
10 1312119
1
14
7
8
4
5
6
3
2
RDIFF
R1 R5R4R3R2
VREF VL1 VH1 VL2 VH2
G = 5
V+
Voltage Level Detect 2
Voltage Level Detect 1
Polarity Output
+ Analog Output
- Analog Output
RIN2
RIN1
GND
1516
CPC5712
CPC5710
•
Telephone line monitor circuit provides linear representation of phone line signal and a ringing detect signal
•
Ringing detect signal is set by external resistor network
•
Virtually undetectable in use
Features:
• Differential or single-ended linear output
• Full-wave ringing level detector comparator with internal threshold,
large hysteresis, and TTL logic level output
• High common-mode rejection ratio (CMRR)
• Worldwide telephone network compatibility
• High differential input impedance, very low common-mode input impedance
• Fixed gain
• 3V to 5.5V operation
• CMOS logic level output (TTL compatible)
Applications:
• Display feature (caller ID) signal buffering
• Line-in-use detection (another-phone-off-hook)
• Battery presence monitoring
• TIP/RING voltage monitoring
• Line polarity
IN+
IN-
VDD
VSS
CMPOUT
LINOUT+
LINOUT-
+
+
-
-
-
+
1.625V
1.25V
A=6
V
3
6
7
1
2
5
4
GND
8
GND
+
-
+
-
50k:
LIN/CMP
VDD
0V
2V
Switch shown
in Detector Mode
VDD
VDD
8-Pin SOIC
8
-
Pin
SO
IC
CPC5710
Resistors set the Voltage Level Detect Thresholds
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
38 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
POR
AIN+
AIN- ADC
VREF
BAND GAP BUF
BUF
AOUT+
AOUT-
ALB
DAC
DLB
FIR
Filter
Control
Register
D0
D1
SPI
Interface
SCLK
SDI
SDO
P-law/A-law
Encoder
PCM/IOM-2
Interface
Logic
FS
DTX
DRX
PCLK
SFSEL
m-law/A-law
Decoder
+
-
+
-
FIR
Filter
0.22PF
Noise
Shaper
D2
D3
RST
VEE
MUTE
CS
VDD
VDD
Features:
• μ-law and A-law ITU G.711 companding codec
• Operates on +3.3V power
• Differential analog signal paths
• Programmable transmit and receive gain, +/-12dB in 0.1dB increments
• Transmit path 60Hz rejection fi lter
• Differential amplifi er drives +3.2dBm into 600Ω
• Stable gain over temperature
• PCM and IOM-2 GCI telecommunication interfaces
• Short and long frame syncs supported
• Independent transmit and receive programmable time slots
• Accepts PCLK from 512kHz to 8.192MHz
• SPI serial interface for control in PCM mode
• Programmable power down-mode, IDD = 20μA
• Analog and digital loopback modes for testing
• SINGLE-CHANNEL VOICE-BAND CODEC: CPC5750 CPC5750 Block Diagram
16-Pin SOIC
8-Pin DIP
Ref
Gen
Level
Sense Digital
Control
Bandpass
Filter
Clock Gen
Osc
Detect
Enable
XOUT
XIN
SIGIN
VREF VDD
VSS
M-980-02: Call Progress Tone Detector
Part
Number
Function
(315 - 640Hz)
Package Types
M-980-02 Tone detector 16-pin SOIC, 8-pin DIP
Applications:
• PBX circuits
• Billing systems
• Test equipment
• Point-of-sale terminals
Features:
• Receive common call progress tones
• The M-980-02 operates with a single 3-5 volt supply
• Linear input (detector)
• Inexpensive band detector with wide dynamic range (>38dB)
• Low power consumption
• CALL PROGRESS TONE DETECTOR: M-980-02
•
Detects common call progress tones including busy tone, dial tone, call waiting tones, and others
•
Operates on a 3V to 5V supply
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 39
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
CPC1465: SHDSL/ISDN
CPC1466: Broadband ADSL/VDSL
Features:
• Integrated bridge rectifi er for polarity correction
• Uses inexpensive optocoupler for DC signaling
• Electronic inductor, breakover, and latch circuits
• Current limiting and excess power protection circuits
• ANSI SHDSL and ISDN compatible
• MLT and SARTS compatible
• Excellent linearity (70dB typ.)
Applications:
• ADSL/VDSL broadband modems
• Router and bridge customer premises equipment
• Leased line equipment
• Mechanized loop test (MLT) networks
• Switched access remote test systems (SARTS) networks
Applications:
• G.SHDSL
• ISDN
• Router and bridge customer premises equipment
• Leased line equipment
• T1/E1 network line cards and repeaters
• Network termination 1 (NT1) equipment
• Mechanized loop test (MLT) networks
• Switched access remote test system (SARTS) networks Digital
Control
Circuitry
Transceiver
TIP
RING
2.2k
5%
:
4W
PR+
NC
NC
TIP
RING
NC
NC
PR-
TC
NC
NC
RS
PD
NC
NC
COM
DC
Blocking
Capacitor
1Fm
68
1%
:
1/4W
1
2
3
6
5
4
75k:
VCC
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
Electronic
Inductor,
Breakover,
Latch, and
Opto Driver
Bridge
Rectifier
Current Limit
and Excess
Power Protection
CPC1465 & Application Circuit
CPC1466
PR+
NC
NC
TIP
RING
NC
NC
PR-
TC
NC
NC
RS
PD
NC
NC
COM
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
Electronic
Inductor,
Breakover,
Latch, and
Opto Driver
Bridge
Rectifier
Current Limit
and Excess
Power Protection
16-Pin SOIC
16-Pin DFN
16-Pin SOIC
16-Pin DFN
• DC TERMINATION ICS (XDSL, ISDN)
Features:
• Meets wetting (sealing) current requirements per ITU-T G.992.3
• Integrated bridge rectifi er for polarity correction
• Uses inexpensive optocoupler for DC sealing current monitoring
• Electronic inductor, breakover, and latch circuits
• Current limiting and excess power protection circuits
• ADSL/VDSL compatible with low-pass fi lter network
• MLT and SARTS compatible
• Compatible with portable test sets
•
Polarity-insensitive DC termination for wetting (sealing) current on the CPE side
•
Conforms to ITU-T G.991.2 to eliminate corrosion on G.SHDSL/ISDN lines
•
Well controlled turn-on and turn-off minimizes injecting impulse noise into the G.SHDSL channel
•
DC Termination IC for broadband ADSL/VDSL applications
•
Eliminates phone line corrosion on DSL twisted-pair, broadband-only lines
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
40 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
Features:
• Monolithic IC reliability
• Impulse noise reduction
• Low, matched on-resistance
• Built-in zero-cross ringing switching
• Small surface mount SOIC packages
• Ultra-low power consumption of <10.5mW
• Robust power-cross and lightning surge performance
• Current limiting, thermal shutdown, and SLIC protection
• CPC75282: dual, 6-pole device
Applications:
• PBX systems
• VoIP gateways
• Channel banks
• Pair gain systems
• Central offi ces (CO)
• Fiber in the loop (FITL)
• Hybrid fi ber coax (HFC)
• Digital loop carriers (DLC)
• Digitally added main line (DAML)
• LINE CARD ACCESS SWITCHES (LCAS)
34 20-Pin SOIC
32 16-Pin SOIC
828-Pin SOIC
CPC7695xx
CPC75282KA, CPC7592BC,
CPC7692Bx
6 Switch - Ringing/Break
+ Line Test/Test Out
TIP
RING
SLIC
Ringing
Return
Break
Codec PCM
Highway
Test
Out
Test
Out Ringing
Access
Ringing
Test
Test
In
Test
In
Ringing
Test Return
Optional
Feature
SCR
and
Trip
Circuit
CPC7594BA
CPC7591Bx
CPC7691Bx
4 Switch - Ringing/Break 10 Switch - Ringing/Break
+ Line Test/Test-Out
+ Test-In
+ Ringer Test
6 Switch - Ringing/Break
+ Channel Test/Test-In
Part
Number
Minimum
1500V/μs
dV/dt
Switch Pairs Zero-Cross
Switching
Protection Features Logic
States
Package
Type
#
Switches Break Ringing
Test
Out
Test
In
Ringing
Test
Current
Limit
Diode
Bridge
Protection
SCR
Minimum Hold
Current (mA)
CPC7691BA •4•• • • • • 110 3 32
CPC7691BB •4•• • • • 332
CPC7692BA •6•• • • • • • 110 4 32
CPC7692BC •6•• • • • • • 110 5 32
CPC7695xA •10 •• • • • • • • • 110 7 8, 34
CPC7695xB •10 •• • • • • • • 7 8, 34
CPC7695xC •10 •• • • • • • • • 110 8 8, 34
CPC7591BA 4 •• • • • • 110 3 32
CPC7591BB 4 •• • • • 332
CPC7592BC 6 •• • • • • • 110 5 32
46 44-Pin TQFP
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 41
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
• LCAS FOR RINGING SLIC: CPC7508
Applications:
• Fiber to the home (FTTH)
• Fiber in the loop (FITL)
• VoIP gateways
• PBX systems
• Digitally added main line (DAML)
• Hybrid fi ber coax (HFC)
Features:
• TTL logic level inputs for 3.3V logic interfaces
• Smart logic for power-up & hot-plug state control
• Monolithic IC reliability
• Low, matched RON
• Clean, bounce-free switching
• Tertiary protection consisting of integrated current
limiting and thermal shutdown for SLIC protection
TLINE
RLINE
TBAT
VDD
RBAT
GND
INA
INB
TSD
LATCH
6
11
5
1
32
12
16
15
13
L
A
T
C
H
Switch
Control
Logic
+12VDC
Ringing
SLIC
8
XSW5
T(T )
TEST_IN CHAN_TEST
9
XSW6
R(R )
TEST_IN CHAN_TEST
7
X
T(T)
TEST_OUT DROP_TEST
SW3
X
X
SW2
SW1
Secondary
Protection
Tip
Ring
10
XSW4
R(R)
TEST_OUT DROP_TEST
X
X
SW7
SW8
INC
14
16-Pin SOIC
CPC7508
•
Next generation LCAS device used with ringing SLICs
•
Replaces the two 2-Form-C electromechanical test relays used in fiber-to-the-home and optical network deployments
•
Provides TIP and RING line break, drop test, and channel test functionality
•
Requires only a single +12V supply
• CYBERGATE™ DATA ACCESS ARRANGEMENT (DAA) MODULES
Applications:
• Modems
• Remote data acquisition
• Fax machines
• Security/metering
• Computer telephony
• PBX
• Voice mail systems
Features:
• 28.8kbps
• Optional caller ID and loop current sense
• Ringing detection
• Low power hook switch
• Surge protection
• Gyrator circuitry
• Meets most regulatory agency requirements
Part
Number
Region Features
Ringing Detection
Caller
ID
Loop Current
Detect
2-4 Wire
Conversion
Full
Wave
Half
Wave
CYG2000 N. America, Asia •
CYG2011 N. America, Asia ••
CYG2020 N. America, Asia ••
CYG2100 European Union
Except France & Spain •
CYG2110 France •
CYG2111 CTR-21 •
CYG2217 N. America, Asia ••
CYG2218 N. America, Asia ••
CYG2320 Australia •
Small Package Size!
1.07" x 1.07" x 0.4"
27.18mm x 27.18mm x 10.16mm
•
Completely functional V.34 DAA circuit in a 1.07” x 1.07” x 0.4” plastic module
•
Surge protection, transient protection Zener diodes, ringing detection, hook switch, gyrator, and a transformer
•
Caller-ID (CID) and loop current detection are also available as options
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
42 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
• LINE SENSE RELAY: M-949-11
M-949-11 Balanced Dual Coil Telephone Line Current Sensing Relay
• Senses telephone line current from 15mA to 200mA
• Used by control circuitry for:
On-hook/off-hook monitoring
Switch hook fl ash detection
Rotary dial pulse
• Meets high isolation voltage requirement of 4000V
• Meets UL and British Standard Specifi cations
• Includes 1-Form-A relay contact
Other Circuit
(Dial Pulse
Counter)
Note: These relays are not polarity
sensitive. The Positive and Negative
indicators show the series-aiding
coil conguration.
M-949
2
65
Tip
CO PBX
Switching Equipment
DATA
Strobe
O-hook
Ring
LC
+
+
+
-
-
-1
34
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 43
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Telecommunications Products
Telecommunications Products
• TELECOM MULTIFUNCTION PRODUCTS (GENERAL PURPOSE MULTIFUNCTION PRODUCTS - PAGE 18)
The OptoMOS line of Telecom Multifunction Products combines a number of discrete optically isolated functions into a single package. These products mix and match
solid state relays, optocouplers, bridge rectifi ers, Darlington transistors, and Zener diodes to create highly functional circuits in a single, small package. Multifunction
devices allow designers to consolidate circuit functions into a single device, freeing up valuable board space and reducing component count. Designed specifi cally for the
telecommunications industry, the Integrated Telecom Circuit (ITC) series is well suited for voice telephony and modem applications, providing most of the major functions
required when designing DAA (Data Access Arrangement) or voice (FXO) line interface circuits. Available in a 16-pin SOIC package.
Features:
• 3750Vrms input-to-output isolation
• Multiple functionality in a single package
• Current limiting (part numbers with “L” suffi x)
• Machine insertable, wave solderable
• TTL and CMOS compatible
Applications:
• Telecommunication/datacommunication
• Instrumentation
• I/O subsystems
• Electronic switching
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
16-Pin SOIC
PV
Zener Protection
Unidirectional Opto-Input
Zener Protection
Bidirectional Opto-Input
PVPV
No Zener Protection
Bidirectional Opto-Input
(1-Form-A) (1-Form-A)
(1-Form-A)
ITC117(L) ITC135 ITC137
Part
Number
Relay Parameters Optocoupler Parameters Isolation
Voltage
(Vrms)
Package
Type
Features
Blocking
Voltage
(VP)
Load
Current
(mA)
On
Resistance
(Ω)
Input Control
Current
(mA)
Breakdown
Voltage
(V)
Current
Transfer
Ratio (%)
Saturation
Voltage
(V)
Input Control
Current
(mA)
ITC117 350 120 15 5 20 33 0.5 6 3750 16-Pin SOIC Full-wave ringing detect
ITC117L 350 120 20 5 20 33 0.5 6 3750 16-Pin SOIC Full-wave ringing detect, current limiting
ITC135 350 120 15 5 20 33 0.5 6 3750 16-Pin SOIC Half-wave ringing detect
ITC137 350 120 15 5 20 33 0.5 6 3750 16-Pin SOIC Full-wave ringing detect
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
44 For data sheets, go to www.ixysic.com/Products/ProdList.htm
RFID Products
RFID Products
The passive transponder uses the applied RF signal to obtain the energy needed to send the 64-bit ID code to the reader. Return data transmission from the transponder
to the reader utilizes FSK encoded modulation.
NCD1015ZP: Low Frequency, Half-Duplex, Robust 50mm Transponder
• RFID TAGS
NCD1015M: Low Frequency, Half-Duplex RFID Integrated Circuit
The NCD1015M contains an ASIC and 2 internal capacitors: one, a resonant capacitor, and the other a storage capacitor. The ASIC contains 3 memory blocks of 32 bits
each, based on fi eld programmable, non-volatile EEPROM. Each block contains 32 data bits. Blocks 1 and 2 are referred to as the 64-bit identifi cation data page 1, which
is secured by an associated 16-bit CRC. Block 0 offers the option to lock the RFID device. Once the device is locked, it is compatible with ISO 11784/85 standards.
The HDX transponder IC receives Write-Block requests from the reader as a pulse interval encoded, 100% amplitude modulated data signal.
Return data transmission from the transponder to the reader utilizes FSK encoded modulation. This is achieved by a serial data stream controlled Frequency Shift Keying
(FSK) of the transponder’s resonant circuit oscillation with an additional on-chip modulation capacitor between the two transponder terminals HF and GND. The passive
transponder uses the supplied RF signal to obtain the energy needed to send the 64-bit ID code to the reader.
Air interface •
Radio frequency center frequency •
Tag-to-reader transmission •
Tag-to-reader data rate •
On-chip 16-bit CRC generator •
Identifi cation data page •
Contact-less, sequential power & data transmission (HDX)
134.2 kHz
FSK modulation, NRZ: “0” ~ 134.4kHz; “1” ~ 124.2kHz
RF/16 (~8kbits/sec)
Reverse CRC-CCITT as used in ISO/IEC 11785
64 bits data + 16 bits CRC
Air interface •
Radio frequency center frequency •
Reader-to-tag transmission •
Tag-to-reader transmission •
Tag-to-reader data rate •
On-chip 16-bit CRC generator •
Identifi cation data •
Contact-less, sequential power & data transmission (HDX)
134.2 kHz typically
Pulse interval encoding (PIE) ~1 to 2kBits/s
FSK modulation, NRZ: “0” ~134.2kHz; “1” ~124.2kHz
RF/16 (~8kbits/sec)
Reverse CRC-CCITT as used in ISO/IEC 11785
64 bits data + 16 bits CRC
RFID PRODUCTS
•
Read-Only RFID device for single transponder applications in the area of electronic identification
•
Supports ISO 11784 and ISO 11785 standards
•
HDX (R/W) RFID device for single transponder applications in the area of electronic identification
•
Supports ISO 11784/85 standards
50mm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 45
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Digitally Programmable Capacitors
Digitally Programmable Capacitors
DIGITALLY PROGRAMMABLE CAPACITORS
• WIDE CAPACITANCE RANGE, NON-VOLATILE, DIGITAL PROGRAMMABLE CAPACITOR: NCD2400M
The NCD2400M is a dedicated electronic calibrator for oscillators, with reliable performance at 105ºC as required by OCXO applications.
This product can be used in series or shunt confi guration, to support a wide variety of tuning circuit topologies.
Digitally controlled capacitance trimming information is communicated via a 2-wire (I2C compatible) interface. The calibration value can be stored in the internal,
re-programmable, non-volatile memory..
Features:
• 2-wire (I2C compatible) serial interface
• 9-bit 512-state digital programmable capacitor
• Cshunt = 12.5pF to 194pF (15.6:1 tuning ratio) in discrete 355fF steps
• Cseries = 1.7pF to 194pF in discrete 376fF steps
• Wide power supply range (2.5 to 5.5V)
• EEPROM non-volatile memory
• Series or shunt confi guration supported
• Operation at 105ºC
• 2 x 2 x 0.65 mm 6-pin DFN package, MSL 1
Applications:
• OCXOs
• VCXOs
• Crystal oscillators
• Tunable RF stages
• RFID tags
• Industrial wireless control
• Capacitor sensor trimming
DFN Package: 2mm x 2mm
NCD2400M
NEW!
NEW!
SDA
SCL
VDD
NCD2400M
DIGITAL
INTERFACE
AND
MEMORY
GND
CP
CN
V+
V+
V+
Cmin
IXYS Integrated Circuits Division − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
46 For data sheets, go to www.ixysic.com/Products/ProdList.htm
Digitally Programmable Capacitors
Digitally Programmable Capacitors
• NON-VOLATILE DIGITAL PROGRAMMABLE CAPACITOR: NCD2100
The NCD2100 is an EEPROM-based digitally programmable variable capacitor that provides capacitive offset trimming for capacitance sensitive circuits. Programming the
non-volatile EEPROM register value or implementing on demand capacitance value changes are easily accomplished by means of the simple two-wire serial bus.
Providing 1024 discrete capacitance values over a nominal value range of 6.6pF to 37.553pF with very small step sizes, the NCD2100 is well suited to ensure proper
operation of capacitive critical circuits. Additionally, to ensure interoperability over a broad array of design environments, the device is rated for operation with supply
voltages of 2.5V to 5.5V across the temperature range of -40ºC to +85ºC.
Features:
• Very small CDAC3 capacitance step size: 0.063pF
• 1024 programmable capacitance values
• Operating frequency up to 250MHz
(contact the factory for operation at higher frequencies)
• Operating supply voltage: 2.5V to 5.5V
• Operating temperature range: -40ºC to +85ºC
• Device size: 2mm x 2mm (DFN-6), 2.9mm x 2.8mm (TSOT-6)
Applications:
• VCXOs
• Crystal oscillators
• Tunable RF stages
• RFID tags
• Industrial wireless control
• Capacitor sensor trimming
DFN Package: 2mm x 2mmTSOT Package: 2.8mm x 2.9mm
NCD2100
DA
CLK
PV
VDD
X1
DIGITAL
INTERFACE
VSS
CDAC1
CDAC2
CDAC3
C0
Capacitance range: 6.6pF to 37.553pF
Capacitance range: 6.6pF to 37.553pF
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900 47
For data sheets, go to www.ixysic.com/Products/ProdList.htm
Other Semiconductor Products
Other Semiconductor Products
• HALL-EFFECT SWITCHES: MX887D & MX887P
Hall
Sensor
Offset Cancellation
Power Management Logic
Ground
Output
Latch
V
SUPPLY
Output
Switch
Hall
Sensor
Offset Cancellation
Power Management Logic
Ground
Output
Latch
V
SUPPLY
Output
Switch
MX887D MX887P
The MX887D and MX887P integrated Hall-Effect switches target the requirements of low-power portable devices with battery operating voltages from 2.5V to 5.5V. On-chip
power management circuitry reduces the effective average current to just 5µA at 3V supply voltage.
Both devices turn on when either a north or south magnetic pole is applied, and turn off when the magnetic fi eld is removed. The MX887D switches between GND and
high-impedance state, while the output of the MX887P switches between the supply voltage and GND.
MX887D and MX887P are ideal reed relay replacements, especially in low-power portable device applications. Available in a TSOT-23 package.
Applications:
• Handheld portable devices
• White goods
• Automotive - body systems
• Security systems
• High-reliability reed switch replacement
The MX877, with push-pull output confi guration, can drive up to 80mA at 60V. Outputs can
be paralleled for increased drive current up to a device total of 400mA sink or source.
Features:
• 6V to 60V drive supply voltage
• 2.7V to 5.5V logic supply range
• 3-wire serial interface plus chip select
• Captures serial and parallel input data
• Outputs can be paralleled
• Small 28-pin QFN package
Applications:
• White goods
• Automatic test equipment (ATE)
• Industrial equipment
• Automotive relay control
I/O
Register
Latch
Register
Parallel
In & Out
Level
Translator
Parallel
Inputs
Shift
Direction
Driver
VCC
GND
VPWR
OUT7
OUT6
OUT5
OUT4
OUT3
OUT2
OUT1
OUT0
SDO
IN7
IN6
IN5
IN4
IN3
IN2
IN1
IN0
CS
SCK
SDI
OE
• LOAD DRIVER: MX877
28-Pin QFN
28 P
in Q
FN
•
8-channel, high voltage switch with 8-bit parallel or serial input control
•
3-wire serial interface connects directly to a microprocessor using an industry standard protocol
•
Designed to operate over a temperature range of -40ºC to +85ºC
OTHER SEMICONDUCTOR PRODUCTS
