P4SMAJ SERIES 1 of 5 © 2002 Won-Top Electronics
P4SMAJ SERIES
400W SURFACE MOUNT TRANSIENT VOLTAGE SU PPRESSORS
Features
! Glass Passivated Die Construction
! 400W Peak Pulse Power Dissipation B
! 5.0V – 170V Standoff Voltage
! Uni- and Bi-Directional Versions Available D
! Excellent Clamping Capability A
! Fast Response Time F
! Plastic Case Material has UL Flammability
Classification Rating 94V-O C H G
E
Mechanical Data
! Case: JEDEC DO-214AC Low Profile Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking:
Unidirectional – Device Code and Cathode Band
Bidirectional – D evice Code Only
! Weight: 0.064 grams (approx.)
“C” Suffi x Designates Bi-directional Devices
“A” Suffix Designates 5% Tolerance Devi ces
No Suffix Designat es 10% Tolerance Devices
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic Symbol Value Unit
Peak Pulse Power Diss i pation at T A = 25°C (Note 1, 2, 5) Figure 3 PPPM 400 Minimum W
Peak Forward Surge Current (Not e 3) IFSM 40 A
Peak Pulse Current on 10/1000µS Waveform (Not e 1) Figure 4 IPPM See Table 1 A
Steady Stat e Power Diss i pati on (Not e 4) PM(AV) 1.0 W
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
Note: 1. Non-repetit i ve current pulse, per Figure 4 and derat ed above TA = 25°C per Figure 1.
2. Mounted on 5.0mm2 copper pads to each terminal.
3. 8.3ms single half sine-wave duty c ycle = 4 pulses per minutes maximum.
4. Lead temperature at 75°C = TL .
5. Peak pulse power waveform is 10/1000µS.
WTE
PO WER SEM IC ONDUC TORS
SMA/DO-214AC
Dim Min Max
A2.50 2.90
B4.00 4.60
C1.40 1.60
D0.152 0.305
E4.80 5.28
F2.00 2.44
G0.051 0.203
H0.76 1.52
All Dimensions in mm