IRFP460B, SiHG460B www.vishay.com Vishay Siliconix D Series Power MOSFET FEATURES PRODUCT SUMMARY * Optimal Design VDS (V) at TJ max. 550 RDS(on) max. at 25 C () VGS = 10 V Qg max. (nC) 170 Qgs (nC) 14 Qgd (nC) - Reduced Capacitive Switching Losses - High Body Diode Ruggedness - Avalanche Energy Rated (UIS) * Optimal Efficiency and Operation - Low Cost - Simple Gate Drive Circuitry - Low Figure-of-Merit (FOM): Ron x Qg 28 Configuration Single D TO-247AC - Fast Switching * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 G S D G - Low Area Specific On-Resistance - Low Input Capacitance (Ciss) 0.25 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. S N-Channel MOSFET APPLICATIONS * Consumer Electronics - Displays (LCD or Plasma TV) * Server and Telecom Power Supplies - SMPS * Industrial - Welding - Induction Heating - Motor Drives * Battery Chargers * SMPS - Power Factor Correction (PFC) ORDERING INFORMATION Package Lead (Pb)-free TO-247AC IRFP460BPbF Lead (Pb)-free and Halogen-free SiHG460B-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER Drain-Source Voltage Gate-Source Voltage Gate-Source Voltage AC (f > 1 Hz) Continuous Drain Current (TJ = 150 C) LIMIT VDS 500 20 30 20 13 62 2.2 281 278 - 55 to + 150 24 0.36 300c VGS VGS at 10 V TC = 25 C TC = 100 C Pulsed Drain Currenta Linear Derating Factor Single Pulse Avalanche Energyb Maximum Power Dissipation Operating Junction and Storage Temperature Range Drain-Source Voltage Slope TJ = 125 C Reverse Diode dV/dtd Soldering Recommendations (Peak Temperature) for 10 s Notes a. Repetitive rating; pulse width limited by maximum junction temperature. b. VDD = 50 V, starting TJ = 25 C, L = 10 mH, Rg = 25 , IAS = 7.5 A. c. 1.6 mm from case. d. ISD ID, starting TJ = 25 C. S12-0812-Rev. B, 16-Apr-12 SYMBOL ID IDM EAS PD TJ, Tstg dV/dt UNIT V A W/C mJ W C V/ns C Document Number: 91502 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFP460B, SiHG460B www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 40 Maximum Junction-to-Case (Drain) RthJC - 0.45 UNIT C/W SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage (N) VDS VGS = 0 V, ID = 250 A 500 - - V VDS/TJ Reference to 25 C, ID = 250 A - 0.56 - V/C VGS(th) VDS = VGS, ID = 250 A 2 - 4 V Gate-Source Leakage IGSS VGS = 20 V - - 100 nA Zero Gate Voltage Drain Current IDSS VDS = 500 V, VGS = 0 V - - 1 VDS = 400 V, VGS = 0 V, TJ = 125 C - - 10 A - 0.2 0.25 gfs VDS = 50 V, ID = 10 A - 12 - S Input Capacitance Ciss 3094 - Coss - 152 - Reverse Transfer Capacitance Crss VGS = 0 V, VDS = 100 V, f = 1 MHz - Output Capacitance - 13 - Effective output capacitance, energy relateda Co(er) - 131 - Effective output capacitance, time relatedb Co(tr) - 189 - - 85 170 - 14 - - 28 - Drain-Source On-State Resistance Forward Transconductance RDS(on) VGS = 10 V ID = 10 A Dynamic pF VGS = 0 V, VDS = 0 V to 400 V Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Turn-On Delay Time td(on) - 24 50 tr - 31 62 - 117 176 Rise Time Turn-Off Delay Time td(off) Fall Time tf Gate Input Resistance Rg VGS = 10 V ID = 10 A, VDS = 400 V VDD = 400 V, ID = 10 A, VGS = 10 V, Rg = 9.1 f = 1 MHz, open drain nC ns - 56 112 - 1.8 - - - 20 - - 80 - - 1.2 V - 437 - ns - 5.9 - C - 25 - A Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Current ISM Diode Forward Voltage VSD Reverse Recovery Time trr Reverse Recovery Charge Qrr Reverse Recovery Current IRRM MOSFET symbol showing the integral reverse p - n junction diode D A G S TJ = 25 C, IS = 10 A, VGS = 0 V TJ = 25 C, IF = IS = 10 A, dI/dt = 100 A/s, VR = 20 V Notes a. Coss(er) is a fixed capacitance that gives the same energy as Coss while VDS is rising from 0 % to 80 % VDS. b. Coss(tr) is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 % to 80 % VDS. S12-0812-Rev. B, 16-Apr-12 Document Number: 91502 2 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFP460B, SiHG460B www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 80 60 TJ = 25 C RDS(on), Drain-to-Source On Resistance (Normalized) ID, Drain-to-Source Current (A) 15 V 14 V 13 V 12 V 11 11 V V 10 V 9V 8V 7V 6V BOTTOM 5 V 3 TOP 40 20 2.5 2 1.5 1 VGS = 10 V 0.5 0 0 5 10 15 20 25 ID = 10 A 0 - 60 - 40 - 20 0 30 VDS, Drain-to-Source Voltage (V) 20 40 60 80 100 120 140 160 TJ, Junction Temperature (C) Fig. 4 - Normalized On-Resistance vs. Temperature Fig. 1 - Typical Output Characteristics 40 10 000 15 V 14 V 13 V 12 V 11 V V 11 10 V 9V 8V 7V 6V BOTTOM 5 V 30 TJ = 150 C Capacitance (pF) ID, Drain-to-Source Current (A) TOP 20 Ciss 1000 100 Coss 10 10 Crss 1 0 0 5 10 15 20 25 0 30 VDS, Drain-to-Source Voltage (V) 100 200 300 400 500 VDS, Drain-to-Source Voltage (V) Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 2 - Typical Output Characteristics 24 VGS, Gate-to-Source Voltage (V) 80 ID, Drain-to-Source Current (A) VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd TJ = 25 C 60 TJ = 150 C 40 20 VDS = 400 V VDS = 250 V VDS = 100 V 20 16 12 8 4 0 0 0 5 10 15 20 VGS, Gate-to-Source Voltage (V) Fig. 3 - Typical Transfer Characteristics S12-0812-Rev. B, 16-Apr-12 25 0 30 60 90 120 150 180 Qg, Total Gate Charge (nC) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Document Number: 91502 3 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFP460B, SiHG460B www.vishay.com Vishay Siliconix 20 ISD, Reverse Drain Current (A) 100 ID, Drain Current (A) TJ = 150 C TJ = 25 C 10 1 16 12 8 4 VGS = 0 V 0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 25 1.6 VSD, Source-Drain Voltage (V) 75 100 125 150 TJ, Case Temperature (C) Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 9 - Maximum Drain Current vs. Case Temperature 1000 625 Operation in this area limited by RDS(on) 600 VDS, Drain-to-Source Brakdown Voltage (V) ID, Drain Current (A) 50 100 10 100 s Limited by RDS(on)* 1 ms 1 TC = 25 C TJ = 150 C Single Pulse 550 525 500 BVDSS Limited 10 ms 0.1 475 - 60 - 40 - 20 0 1 10 100 1000 VDS, Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 20 40 60 80 100 120 140 160 TJ, Junction Temperature (C) Fig. 8 - Maximum Safe Operating Area Normalized Effective Transient Thermal Impedance 575 Fig. 10 - Temperature vs. Drain-to-Source Voltage 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.02 0.05 Single Pulse 0.01 0.0001 0.001 0.01 0.1 1 Pulse Time (s) Fig. 11 - Normalized Thermal Transient Impedance, Junction-to-Case S12-0812-Rev. B, 16-Apr-12 Document Number: 91502 4 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFP460B, SiHG460B www.vishay.com Vishay Siliconix RD VDS QG 10 V VGS D.U.T. RG QGS + - VDD QGD VG 10 V Pulse width 1 s Duty factor 0.1 % Charge Fig. 12 - Switching Time Test Circuit Fig. 16 - Basic Gate Charge Waveform Current regulator Same type as D.U.T. VDS 90 % 50 k 12 V 0.2 F 0.3 F + 10 % VGS D.U.T. td(on) td(off) tf tr - VDS VGS 3 mA Fig. 13 - Switching Time Waveforms IG ID Current sampling resistors Fig. 17 - Gate Charge Test Circuit L Vary tp to obtain required IAS VDS D.U.T RG + - IAS V DD 10 V 0.01 tp Fig. 14 - Unclamped Inductive Test Circuit VDS tp VDD VDS IAS Fig. 15 - Unclamped Inductive Waveforms S12-0812-Rev. B, 16-Apr-12 Document Number: 91502 5 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFP460B, SiHG460B www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations * Low stray inductance * Ground plane * Low leakage inductance current transformer + - - Rg * * * * + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor "D" D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 18 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91502. S12-0812-Rev. B, 16-Apr-12 Document Number: 91502 6 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-247AC (High Voltage) A A 4 E B 3 R/2 E/2 7 OP O k M DBM A2 S (Datum B) OP1 A D2 Q 4 4 2xR (2) D1 D 1 2 4 D 3 Thermal pad 5 L1 C L A See view B 2 x b2 3xb 0.10 M C A M 4 E1 0.01 M D B M View A - A C 2x e A1 b4 Planting Lead Assignments 1. Gate 2. Drain 3. Source 4. Drain D DE (b1, b3, b5) Base metal E C (c) C c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B MILLIMETERS DIM. MIN. MAX. A 4.58 5.31 A1 2.21 2.59 A2 1.17 2.49 b 0.99 1.40 b1 0.99 1.35 b2 1.53 2.39 b3 1.65 2.37 b4 2.42 3.43 b5 2.59 3.38 c 0.38 0.86 c1 0.38 0.76 D 19.71 20.82 D1 13.08 ECN: X13-0103-Rev. D, 01-Jul-13 DWG: 5971 INCHES MIN. MAX. 0.180 0.209 0.087 0.102 0.046 0.098 0.039 0.055 0.039 0.053 0.060 0.094 0.065 0.093 0.095 0.135 0.102 0.133 0.015 0.034 0.015 0.030 0.776 0.820 0.515 - DIM. D2 E E1 e Ok L L1 N OP O P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.72 5.46 BSC 0.254 14.20 16.25 3.71 4.29 7.62 BSC 3.51 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.540 0.215 BSC 0.010 0.559 0.640 0.146 0.169 0.300 BSC 0.138 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Contour of slot optional. 3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body. 4. Thermal pad contour optional with dimensions D1 and E1. 5. Lead finish uncontrolled in L1. 6. O P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154"). 7. Outline conforms to JEDEC outline TO-247 with exception of dimension c. 8. Xian and Mingxin actually photo. Revision: 01-Jul-13 Document Number: 91360 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000