Rev. D
AH 2007
08
01
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
TAITRON C OMPONENTS INCORPO R ATED www.taitroncomponents.com
Page 1 of 6
Tel: (800)
247
2232 (800)
TAITRON (661)
257
6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
SMAJ5.0A~170CA
400W Surface Mount Transient Voltage Suppressor
Features
z Stand-off voltage from 5.0 to 170 volts
z 400W Peak Pulse Power capability on 10/1000 µs waveform
repetition rate(duty cycle): 0.01%
z Ideal for ESD protection of data lines in accordance with
IEC 1000-4-2 (IEC801-2)
z Ideal for EFT protection of data lines in accordance with
IEC 1000-4-4 (IEC801-4)
z Fast response time: typically less than 1.0ps from 0v to VBR
z Low incremental surge resistance, excellent clamping capability
z Typical IR less than 1 uA above 10V
z High temperature soldering guaranteed:
250°C/10 seconds at terminals
z This series is UL recognized under component index. File number E315008
z RoHS Compliant
Maximum Ratings (T
Ambient
=25ºC unless noted otherwise)
Symbol Description Value Unit Conditions
V WM Stand-Off Voltage 5.0 to 170 V
PPPM Peak Pulse Power Dissipation
on 10/ 1000 us waveform Minimum 400 W Non-repetitive current pulse
IPPM Peak Pulse current
on 10/ 1000 us waveform See Table A Non-repetitive current pulse
PM(AV) Steady State Power Dissipation 1.0 W At TL(Lead Temperature)=75°C (Note 1)
IFSM Peak Forward Surge Current 40.0 A 8.3ms single half sine-wave superimposed
on rated load (uni-direction only), TL=75°C
V F Maximum Instantaneous
Forward Voltage 3.5 V
8.3ms single half sine-wave
(uni-direction only), TL=75°C
TJ,TSTG Operating Junction and Storage
Temperature Range -55 to 150 ° C
Note: (1) Mounted on copper pad area of 0.2" x 0.2" (5.0mmx5.0mm).
SMA