P16, PA16 www.vishay.com Vishay Sfernice Knob Potentiometer FEATURES * Test according to CECC 41000 or IEC 60393-1 * P16 - Version for professional and industrial applications (cermet) 1 W at 40 C * PA16 - Version for professional audio applications (conductive plastic) 0.5 W at 40 C * Compact (integrated) * High dielectric strength: 2500 VRMS The P16 is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance. * Fully sealed and panel sealed * Metallic or plastic knob options * Custom knob on request * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters ( 0.5 mm) P16NP P16NM Thickness nut 2 mm washer 1.5 mm Thickness nut 2 mm washer 1.5 mm Panel sealing ring 12 wrench Thread M10 x 0.75 9.6 8.8 Panel Cutout 10.2 9.4 Panel sealing ring 12 wrench Thread M10 x 0.75 + 0.1 8.1 + 0 7.2 13.5 1 15.5 1 7.2 13.5 1 15.5 1 b Reference mark 1.8 o 10 + 0.1 +0 3 terminals Panel thickness max.: 3 mm 0.3 30 a c 8 Revision: 06-Mar-17 O 16 Document Number: 51036 1 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P16, PA16 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS P16 PA16 Cermet Conductive plastic 270 10 270 10 Resistive element Electrical travel 1.25 P16 LIN. TAPER "A" " RATED POWER IN W 1.00 P16 LOG. TAPER "L & F" NM Power rating chart 0.75 0.50 0.25 NP & PA16 LIN. TAPER 0 NP NP 40 20 0 NM NM PA16 LOG. TAPER 60 80 120 100 140 AMBIENT TEMPERATURE IN C a Circuit diagram c (1) (3) b (2) cw 100 80 % TOTAL RESISTANCE F Taper 60 A L 40 20 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION Resistance range Linear taper Logarithmic taper Standard series E3 Tolerance 22 to 10 M 1 k to 1 M 100 to 2.2 M 470 to 500 k 1 - 2.2 - 4.7 and on request 1 - 2 - 5 1 - 2.2 - 4.7 Standard 20 % 20 % On request 10 % 10 % (1 k to 100 k) 1 W at +40 C 0.5 W at +40 C 0.5 W at +40 C 0.25 W at +40 C 150 ppm/C 500 ppm/C Dielectric strength (RMS) 2500 V 2500 V Limiting element voltage (linear law) 350 V 350 V 3 % Rn or 3 2 % Rn or 3 Power rating Temperature coefficient (typical) Contact resistance variation End resistance (typical) Insulation resistance (500 VDC) Revision: 06-Mar-17 Linear Logarithmic 1 1 106 M 106 M Document Number: 51036 2 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P16, PA16 www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical travel 300 5 Operating torque 2 Ncm typical End stop torque 25 Ncm maximum Max. tightening torque of mounting nut 180 Ncm maximum Unit Weight 4.5 g typical ENVIRONMENTAL SPECIFICATIONS Temperature range METALLIC KNOB PLASTIC KNOB -40 C to +125 C -40 C to +85 C 40/100/56 40/85/56 Climatic category Sealing Sealed container and panel sealed Protection grades IP67 MARKING CONTROL KNOB * Ohmic value code, tolerance code and taper * Manufacturing date code Black metallic knob (NM). Black plastic knob (NP). For white and blue color see ordering information. Other dimensions, shapes, colors of control knobs are manufactured on request - please consult Vishay. Other reference marks (shapes, colors) and legends can be printed on plastic knob on request - please consult Vishay. PACKAGING * Carton box of 20 pieces P16 STANDARD RESISTANCE ELEMENT DATA PA16 STANDARD RESISTANCE ELEMENT DATA LINEAR TAPER LOG TAPER STANDARD MAX. MAX. MAX. MAX. RESIS- POWER MAX. CUR. POWER MAX. CUR. TANCE AT VOLTAGE THROUGH AT VOLTAGE THROUGH VALUES 40 C WIPER 40 C WIPER LINEAR TAPER LOG TAPER STANDARD MAX. MAX. MAX. MAX. RESIS- POWER MAX. CUR. POWER MAX. CUR. TANCE AT VOLTAGE THROUGH AT VOLTAGE THROUGH VALUES 40 C WIPER 40 C WIPER W V mA 22 47 100 220 470 1K 2.2K 4.7K 10K 22K 47K 100K 220K 470K 1M 2.2M 4.7M 10M 1 1 1 1 1 1 1 1 1 1 1 1 0.56 0.26 0.12 0.05 0.02 0.01 4.69 6.85 10 14.8 21.7 31.6 46.9 68.5 100 148 217 316 350 350 350 350 350 350 213 146 100 67.4 46.1 31.6 21.3 14.6 10 6.74 4.61 3.16 1.59 0.75 0.35 0.16 0.07 0.012 Revision: 06-Mar-17 W 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.26 0.12 0.056 V 7.1 10.5 15.3 22.4 33.2 48.5 70.7 105 153 224 332 350 350 350 mA 71 48 32.6 22.4 15.1 10.3 7.07 4.77 3.26 2.24 1.51 0.74 0.35 0.16 W V mA 470 1K 2.2K 4.7K 10K 22K 47K 100K 220K 470K 1M 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.26 0.12 22.4 33.2 48.5 70.7 105 153 224 332 350 350 22.4 15.1 10.3 7.07 4.77 3.26 2.24 1.51 0.74 0.35 W V mA 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 10.8 15.8 23.5 34.3 50.0 74 108 158 235 343 23.1 16 11 7 5.0 3.4 2.3 1.6 1.1 0.7 Document Number: 51036 3 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P16, PA16 www.vishay.com Vishay Sfernice PERFORMANCE TESTS TYPICAL VALUES AND DRIFTS CONDITIONS Electrical endurance RT/RT (%) R1-2/R1-2 (%) OTHER 5% - Insulation resistance: > 104 M Contact res. variation: < 2 % Rn 56 days 40 C, 93 % HR 2% 1% 1000 h at rated power 90'/30' cycle at +40 C Damp heat, steady state Mechanical endurance Shock Vibration Insulation resistance: > 104 M 50 000 cycles 5% - Contact res. variation: < 2 % Rn 50 g's at 11 ms 3 successive shocks in 3 directions 0.2 % 0.5 % - 10 Hz to 55 Hz 0.75 mm or 10 g's during 6 h 0.2 % - V1-2/V1-3 0.5 % Note * Nothing stated herein shall be construed as a guarantee of quality or durability. ORDERING INFORMATION P 1 6 N P 2 2 3 M A B 1 5 MODEL STYLE OHMIC VALUE TOLERANCE TAPER P16 = cermet NM: metallic black NP: plastic black WM: metallic white WP: plastic white BP: plastic blue 223 = 22 k for ohmic value range see electrical specification M = 20 % A: linear L: clockwise logarithmic F: inverse clockwise logarithmic PA16 = conductive plastic On request: K = 10 % PACKAGING CODE SPECIAL NUMBER B15 = box of 20 pieces (If applicable) Given by Vishay for custom design PART NUMBER DESCRIPTION (for information only) P16 NP 22 k 20 % A MODEL STYLE VALUE TOLERANCE TAPER BO SPECIAL PACKAGING e3 SPECIAL LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 06-Mar-17 Document Number: 51036 4 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000