SANbox 5200 (R) The Industry's First Fibre Channel Stackable Switch 10 Gb SANbox 5200 t hFe IBRE CHANNEL S T AF C L AEN NSEW I BKR A E BC H L I STWCI THC H E S * * * * * * * * Stackable Switch The benefits of stackable IP switches are now available for SANs. The SANbox 5200 stackable switch delivers seamless scalability and performance of a chassis switch, in an easy-to-manage, pay-as-you-grow solution. With sixteen 2Gb ports plus a four-pack of high-speed 10Gb ISL ports, and entry as low as 8 ports with 4-port software-keyed increments, and included graphical user interface (GUI) wizards, each 5200 stackable switch provides maximum flexibility for configuring, managing and scaling SANs. SANbox 5200 Fibre Channel Stackable Switches * 8, 12 or 16 auto detecting 2Gb /1Gb device ports with 4-port incremental upgrade with software license available * (4) 10Gb ports for high-speed stacking links. * Stacking of up to 4 units for 64 available user ports. * Non-Disruptive Code Load and Activation (NDCLA) * Configuration wizard software tool * * * * to simplify switch installation and fabric scaling. Interoperable with all FC SW-2 compliant Fibre Channel switches Full-fabric, public-loop or switch-toswitch connectivity on 2Gb or 1Gb front ports. Full-fabric or switch-to-switch connectivity on 10Gb ports Auto-sensing, self-configuring ports * Non-blocking full-bandwidth * * * * architecture I/O StreamGuard for RSCN suppression "No-Wait" routing - guaranteed maximum performance independent of data traffic Industry's lowest latency for maximum performance SFP (small form pluggable) connectivity - 16 front ports in a 1U full-width rack form-factor * SANbox ManagerTM Open Management System - designed for seamless operation with higherlevel third-party management applications * In-band, out-of-band, Telnet and SNMP management access * ASIC-embedded memory - faster, more scalable and more reliable than shared memory architecture BREAKTHROUGH EASE OF USE. The first Fibre Channel stackable PERVASIVE INTEROPERABILITY. Interoperable with popular servers, switches to be configured and zoned with simple wizards. Plus, storage and networking products from major manufacturers including SANsurfer Management SuiteTM makes stack management easy ADIC, Brocade, Cisco, Computer Associates, Dell, EMC, Emulex, HDS, HP, throughout your SAN lifecycle by helping you install, configure, monitor, IBM, LSI, McDATA, Microsoft, Quantum, StorageTek, Sun, VERITAS, and diagnose and upgrade your QLogic HBAs and switches - all from one many others. application. BLAZING 10Gb PERFORMANCE. The first SAN product to support trafINCREDIBLY LOW COST. Starting at 8 ports, SANbox 5200 stackable fic between switches, servers and storage at up to 10Gb per second, six switches offer an entry point affordable to the smallest business. And times faster than 2Gb networks being deployed today. A single, 10Gb with an easy-to-use graphical user interface (GUI), you won't have to hire inter-switch link (ISL) ensures low latency between switches and elimi- a SAN expert to manage your stack. nates the cost and complexity of trunking up to six 2Gb ports. MODULAR SCALABILITY. Grow by adding ports in 8, 12, and 16-port increments up to 64 ports in a single stack. Of course you can add, change or delete switches without disrupting your storage network. SANbox 5200 10 Gb * * * * * * * * T E C H N I C A L S P E C I F I C AT I O N S SANbox 5200 Fibre Channel Stackable Switches * Physical & Signaling Interface Rev. 4.3 (FC-PH) * Physical & Signaling Interface-2 (FC-PH-2) * Physical & Signaling Interface-3 (FC-PH-3) * Fabric Generic Requirements (FC-FG) * Generic Services (FC-GS) * Generic Services-2 (FC-GS-2) * Generic Services-3 (FC-GS-3) * Switch Fabric (FC-SW-2) * Arbitrated Loop Rev. 4.6 (FC-AL) * Arbitrated Loop-2 Rev. 7(FC-AL-2) * Fibre Loop Attachment (FC-FLA) * Tape Technical Report (FC-Tape) * Virtual Interface Architecture Mapping (FC-VI) * Element MIB Specification * Fibre Alliance MIB Specification Fibre Channel Classes of Service * Classes 2, 3 connectionless Mechanical Media Type * Hot-pluggable, industry-standard SFPs (Small Form Pluggable) for 2Gb and 1Gb ports * Hot-pluggable, industry-standard XPAK cables for 10Gb ports Dimensions - Width: 432 mm (17") 19" rack mountable - Height: 43.2 mm (1.70" )(1U) - Depth: 305 mm (12") Fabric Port Speed * 2 Gb/s, Full-Duplex, auto-negotiating for compatibility with existing 1Gb devices * 10 Gb/s, Full-Duplex, Interoperability * Compatible with FC-SW-2 compliant switches * Management interoperability with leading SAN management applications Fabric Latency * Less than 0.4 s (best case, no contention) * Cut-through routing Management Processor * Pentium class Processor Fabric Aggregate Bandwidth * Single chassis: Up to 144 Gb/s (full-duplex) end-to-end * Non-blocking architecture Maximum Frame Sizes * 2148 bytes (2112 byte payload) Power Supply/Cooling * Integral Power Supply with industry-standard IEC connector * Orderable front-to-back or back-to-front air pattern Environmental Operating * Temperature: * Humidity: * Altitude: * Vibration: * Shock: Non-Operating * Temperature: * Humidity: * Altitude: * Vibration: Fabric Management Fabric Point-to-Point Bandwidth * 412 MB/s Full-Duplex on 2 Gb ports * 2400+ MB/s Full-Duplex on 10Gb ports Enclosure Types and Options * Secure stacking with rubber feet or rack mounting brackets (both included) * Optional rail mounting kit. Weight - 4.08 kg (9 lbs) Supported SFP Types * Shortwave (optical) * Longwave (optical) Cable Types (2Gb Ports) * 50/62.5 micron multimode fiber optic * 9 micron single-mode fiber optic Performance Features SANbox 5200 Fibre Channel Stackable Switches Fabric Port Types * All ports can assume the following states: - F_port: Fabric - FL_port: Fabric loop (public loop) - E_port: Switch-to-switch * Ports are auto-discovering, self-configuring Media Transmission Ranges (2Gb Ports) * Optical - Shortwave: 500 m (1,640 ft.) - Longwave: 10 km (6.2 mi.) Modes of Operation * Fabric * Public loop Stackable Switch Management Methods * SANbox Manager management tools (standard and private brand versions) * SNMP, Telnet, GS-3 * Shock: +5C to +40C (41 to 104F) 15% to 80% non-condensing 0 to +10,000 feet IEC 68-2 5-500 Hz, random, 0.21 G rms, 10 minutes IEC 68-2 4g, 11ms, 20 repetitions -40C to +70C (-40 to 158 F) 25% to 90% non-condensing 0 to +50,000 feet IEC 68-2 5 to 500 Hz, random, 2.09 G rms, 10 minutes IEC 68-2 30g, 292 ips, 3 repetitions, 3 axis Electrical Per-port Buffering * ASIC-embedded memory (non-shared) * Each port has a guaranteed 16-credit zero wait state buffer for full performance up to 10km @ 2Gb and 2.5Km @ 10Gb Scalability Ports Per Chassis * (8 to 16) 2Gb / 1Gb ports upgradeable in 4-port increments * (4) 10Gb XPAK MSA-compliant ports Multi Switch Fabrics * Supports all topologies, including: stack, cascade, cascaded loop, mesh and Multi-stageTM with E_Port * Supports multiple links between switches * In-order delivery of frames in all Multi-switch and multi-link configurations Access Methods * In-band * Ethernet 10/100 BaseT with RJ45 Diagnostics * Power-up self-test of all functionality except media modules * Field-selectable full self-test including media modules Fabric Services * Simple Name Server * Fabric Zoning - Hardware-based - Access Control List (port) - Name Server (WWN) - Orphan Zoning - All zoning assigned on per-node basis, even across Multi-stage fabrics * Registered State Change Notification (RSCN) * I/O StreamGuard * Multi-chassis in-order delivery * Automatic path selection in Multi-stage configurations User Interface * LED indicators, command console, and web-based utilities Operating Voltage * 100-240V Power Source Loading * 140VA Heat Output * 100W maximum (with full-optics configuration) Regulatory Safety Standards: * UL 60950 (USA) * CSA 22.2 No.60950 (Canada) * EN60950 (EC) * CB Scheme-IEC 60950 Emissions Standards * FCC Part 15B Class A (USA) * VCCI Class A ITE (Japan) * ICES-03 Issue 3 (Canada) * EN55022 Level A (EC) Harmonics * EN 61000-3-2 Immunity * EN 55024:1998 Marking * UL (United States) * cUL (Canada) * TUV * VCCI * CE Voltage Fluctuations * EN 61000-3-3 For a list of authorized resellers, visit www.qlogic.com/buyqlogic/home_buy.asp TM SN0058017-00 Rev B 1/04 Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 Europe Headquarters QLogic (UK) LTD. Surrey Technology Centre 40 Occam Road Guildford Surrey GU2 7YG UK +440(0)1483 295825 WWW.QLOGIC.COM (c)2004 QLogic Corporation. All rights reserved. QLogic, Powered by QLogic, SANbox and SANsurfer are registered trademarks of QLogic Corporation. The QLogic logo, the Powered by logo, SANbox 5200, SANsurfer Management Suite, SANbox Manager and Multi-stage are trademarks of QLogic Corporation, which may be registered in some jurisdictions. All other brands and product names are trademarks or registered trademarks of their respective holders. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.