TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 FEATURES APPLICATIONS * * * * * * * * * * * * Parameters Specified at 2.7-V, 5-V, and 15-V Supplies Supply Current 7 A (Typ) at 5 V Response Time 4 s (Typ) at 5 V Push-Pull Output Input Common-Mode Range Beyond VCC- and VCC+ Low Input Current D PACKAGE (TOP VIEW) NC IN- IN+ VCC- 1 2 8 7 3 6 4 5 Battery-Powered Products Notebooks and PDAs Mobile Communications Alarm and Security Circuits Direct Sensor Interface Replaces Amplifiers Used as Comparators With Better Performance and Lower Current DCK PACKAGE (TOP VIEW) DBV PACKAGE (TOP VIEW) NC VCC+ OUT NC OUT VCC+ IN+ 1 5 OUT VCC+ IN+ VCC- 2 3 4 IN- 1 6 2 5 3 4 NC VCC- IN- NC - No internal connection DESCRIPTION/ORDERING INFORMATION The TLV7211 and TLV7211A are micropower CMOS comparators available in the space-saving SOT-23-5 package. This makes the comparators ideal for space- and weight-critical designs. The TLV7211A features an input offset voltage of 5 mV, and the TLV7211 features an input offset voltage of 15 mV. The main benefits of the SOT-23-5 package are most apparent in small portable electronic devices, such as mobile phones, pagers, notebook computers, personal digital assistants, and PCMCIA cards. The rail-to-rail input voltage makes the TLV7211 or TLV7211A a good choice for sensor interfacing, such as light detector circuits, optical and magnetic sensors, and alarm and status circuits. The SOT-23-5 package's small size allows it to fit into tight spaces on PC boards. ORDERING INFORMATION TA VOS (MAX) PACKAGE (1) SOIC - D 5 mV SOT-23-5 - DBV SOT (SC-70) - DCK -40C to 85C SOIC - D 15 mV SOT-23-5 - DBV SOT (SC-70) - DCK (1) (2) ORDERABLE PART NUMBER Reel of 2500 TLV7211AIDR Tube of 75 TLV7211AID Reel of 3000 TLV7211AIDBVR Reel of 3000 TLV7211AIDCKR Reel of 250 TLV7211AIDCKT Reel of 2500 TLV7211IDR Tube of 75 TLV7211ID Reel of 3000 TLV7211IDBVR Reel of 3000 TLV7211IDCKR Reel of 250 TLV7211IDCKT TOP-SIDE MARKING (2) 7211AI YBN_ Y8_ TY7211 YBK_ Y7_ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2006-2007, Texas Instruments Incorporated TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 FUNCTIONAL BLOCK DIAGRAM IN- OUT IN+ Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN VCC+ - VCC- MAX Supply voltage (2) UNIT 16 V Supply voltage V VID Differential input voltage (3) VI Input voltage range (any input) VCC- - 0.3 VCC+ + 0.3 V VO Output voltage range VCC- - 0.3 VCC+ + 0.3 V ICC Supply current 40 mA II Input current 5 mA IO Output current 30 mA D package JA Package thermal impedance (4) (5) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) (4) (5) 97 DBV package 206 DCK package 259 -65 C/W 150 C 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND. Differential voltages are at IN+ with respect to IN-. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. ESD Protection Human-Body Model TYP UNIT 2000 V Recommended Operating Conditions 2 MIN MAX VCC+ - VCC- Supply voltage 2.7 15 V TJ Operating virtual junction temperature -40 85 C Submit Documentation Feedback UNIT TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 2.7-V Electrical Characteristics VCC+ = 2.7 V, VCC- = GND, VCM = VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS TJ TLV7211A MIN 25C TLV7211 TYP MAX 3 5 MIN TYP MAX 3 15 UNIT VOS Input offset voltage TCVOS Input offset voltage temperature drift 25C 1 1 Input offset voltage average drift (1) 25C 3.3 3.3 V/month IB Input current 25C 0.04 0.04 pA IOS Input offset current 25C 0.02 0.02 pA CMRR Common-mode rejection ratio 0 VCM 2.7 V 25C 75 75 dB PSRR Power-supply rejection ratio 2.7 V VCC+ 15 V 25C 80 80 dB AV Voltage gain 100 dB -40C to 85C 25C CMRR > 55 dB CMVR Input common-mode voltage range VOH High-level output voltage Iload = 2.5 mA VOL Low-level output voltage Iload = 2.5 mA -40C to 85C 2.7 3 -0.3 3 -0.2 -0.3 0 25C 2.4 -40C to 85C 2.3 25C 2.5 25C 25C -40C to 85C -0.2 0.2 0.3 2.5 0.2 0.4 7 12 V 10 12 0.3 0.4 7 14 5 V 0 2.4 2.3 -40C to 85C Supply current 2.9 mV V/C 2.7 -40C to 85C VOUT = High-Idle (1) 2.9 -40C to 85C VOUT = Low 18 100 25C 25C CMRR > 55 dB ICC 8 12 14 5 V 10 A 12 Input offset voltage average drift is calculated by dividing the accelerated operating life VOS drift by the equivalent operational time. This represents worst-case input conditions and includes the first 30 days of drift. Submit Documentation Feedback 3 TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 5-V Electrical Characteristics VCC+ = 5 V, VCC- = GND, VCM = VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS TLV7211A MIN 25C TLV7211 TYP MAX 3 5 MIN TYP MAX 3 15 UNIT VOS Input offset voltage TCVOS Input offset voltage temperature drift 25C 1 1 Input offset voltage average drift (1) 25C 3.3 3.3 V/month IB Input current 25C 0.04 0.04 pA IOS Input offset current 25C 0.02 0.02 pA CMRR Common-mode rejection ratio 25C 75 75 dB PSRR Power-supply rejection ratio 25C 80 80 dB AV Voltage gain 100 dB -40C to 85C 5 V VCC+ 10 V 25C -40C to 85C Input common-mode voltage range VOH High-level output voltage Iload = 5 mA VOL Low-level output voltage Iload = 5 mA 5.3 -0.3 5.3 -0.3 0 25C 4.6 -40C to 85C 4.45 25C 4.8 0.2 7 4.8 0.4 0.2 5 -40C to 85C V 0.4 0.55 14 7 18 25C V 0 4.6 0.55 25C -0.2 4.45 -40C to 85C VOUT = High-Idle -0.2 mV V/C 5 -40C to 85C Supply current 5.2 5 -40C to 85C VOUT = Low 18 100 5.2 25C CMRR > 55 dB ICC 8 25C CMRR > 55 dB CMVR 14 18 10 5 13 V 10 A 13 IOH Short-circuit output current Isource 25C 30 30 mA IOL Short-circuit output current Isink, VO < 12 V (2) 25C 45 45 mA (1) (2) 4 TJ Input offset voltage average drift is calculated by dividing the accelerated operating life VOS drift by the equivalent operational time. This represents worst-case input conditions and includes the first 30 days of drift. Do not short circuit the output to V+ if V+ is >12 V. Submit Documentation Feedback TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 15-V Electrical Characteristics VCC+ = 15 V, VCC- = GND, VCM = VO = VCC+/2, and RL > 1 M (unless otherwise noted) PARAMETER TEST CONDITIONS TJ TLV7211A MIN 25C TLV7211 TYP MAX 3 5 MIN TYP MAX 3 15 UNIT VOS Input offset voltage TCVOS Input offset voltage temperature drift 25C 4 4 V/C Input offset voltage average drift (1) 25C 4 4 V/month IB Input current 25C 0.04 0.04 pA IOS Input offset current 25C 0.02 0.02 pA CMRR Common-mode rejection ratio 25C 82 82 dB PSRR Power-supply rejection ratio 25C 80 80 dB AV Voltage gain 100 dB -40C to 85C 5 V VCC+ 10 V 25C CMRR > 55 dB CMVR Input common-mode voltage range CMRR > 55 dB VOH High-level output voltage Iload = 5 mA VOL Low-level output voltage Iload = 5 mA IOL (1) (2) Short-circuit output current 15.3 -40C to 85C Isink, VO < 12 V (2) -0.2 -0.3 0 25C 14.6 -40C to 85C 14.45 14.8 7 14.8 0.4 0.2 -40C to 85C V 0.4 0.55 14 7 18 5 V 0 14.6 0.55 25C -0.2 14.45 0.2 mV 15.3 15 -0.3 -40C to 85C Isource 15.2 15 25C 25C Supply current Short-circuit output current -40C to 85C 18 100 15.2 25C VOUT = High-Idle IOH 25C -40C to 85C VOUT = Low ICC 8 14 18 12 5 14 V 12 A 14 25C 30 30 mA 25C 45 45 mA Input offset voltage average drift is calculated by dividing the accelerated operating life VOS drift by the equivalent operational time. This represents worst-case input conditions and includes the first 30 days of drift. Do not short circuit the output to V+ if V+ is >12 V. Submit Documentation Feedback 5 TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 Switching Characteristics TJ = 25C, VCC+ = 5 V, VCC- = GND, VCM = VO = VCC+/2, and RL > 1 M (unless otherwise noted) TYP UNIT trise Rise time PARAMETER f = 10 kHz, CL = 50 pF (1), Overdrive = 10 mV TEST CONDITIONS 0.3 s tfall Fall time f = 10 kHz, CL = 50 pF (1), Overdrive = 10 mV 0.3 s f = 10 kHz, CL = 50 pF (1) tPHL Propagation delay time, high to low (2) VCC+ = 2.7 V, f = 10 kHz, CL = 50 pF (1) f = 10 kHz, CL = 50 pF (1) tPLH Propagation delay time, low to high (2) VCC+ = 2.7 V, f = 10 kHz, CL = 50 pF (1) (1) (2) 6 CL includes probe and jig capacitance. Input step voltage for propagation delay measurement is 2 V. Submit Documentation Feedback 10 mV 10 100 mV 4 10 mV 10 100 mV 4 10 mV 6 100 mV 4 10 mV 7 100 mV 4 s s TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE (SOURCING) SUPPLY CURRENT vs SUPPLY VOLTAGE (SINKING) 18 7 TA = -40C 6 TA = -40C 16 TA = 25C TA = 25C 4 Supply Current - A Supply Current - A 14 5 TA = 85C 3 TA = 125C 2 10 TA = 125C 8 6 4 Positive Input = 0.1 V Negative Input = 0 V 1 Positive Input = 0 V Negative Input = 0.1 V 2 0 0 0 1 2 3 4 5 6 7 8 0 9 10 11 12 13 14 15 1 2 3 4 SUPPLY CURRENT vs TEMPERATURE (SOURCING) 6 7 8 9 10 11 12 13 14 15 SUPPLY CURRENT vs TEMPERATURE (SINKING) 18 6 VCC = 15 V 16 VCC = 2.7 V 15 V Supply Current - A 14 Supply Current - A 5 Supply Voltage - V Supply Voltage - V 5 TA = 85C 12 4 VCC = 5 V 3 2 12 5V 10 8 6 2.7 V 4 1 Positive Input = 0.1 V Negative Input = 0 V 0 -40 -25 -10 5 20 35 50 65 80 95 Positive Input = 0 V Negative Input = 0.1 V 2 0 -40 -25 -10 5 20 35 50 65 80 95 110 125 110 125 Temperature - C Temperature - C Submit Documentation Feedback 7 TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 TYPICAL CHARACTERISTICS (continued) OUTPUT SOURCING CURRENT vs SUPPLY VOLTAGE OUTPUT SINKING CURRENT vs SUPPLY VOLTAGE 80 120 Positive Input = 0.1 V Negative Input = 0 V 70 Positive Input = 0.1 V Negative Input = 0 V 100 Sinking Current - mA Source Current - mA 60 TA = -40C 50 40 TA = 25C 30 20 TA = 85C 80 TA = -40C 60 TA = 25C 40 TA = 85C 20 10 TA = 125C TA = 125C 0 0 1 2 3 4 5 6 7 8 9 0 10 11 12 0 1 2 3 Supply Voltage - V OUTPUT VOLTAGE vs OUTPUT SOURCING CURRENT 5 6 7 8 9 10 11 12 OUTPUT VOLTAGE vs OUTPUT SINKING CURRENT 900 1200 VCC = 5 V VCC = 5 V 800 Output Voltage to GND - mV 1000 OutputVoltage Voltage to to VCCCC- - mV Output mV 4 Supply Voltage - V 800 TA = 125C 600 TA = 85C 400 TA = 25C 200 700 600 TA = 125C 500 TA = 85C 400 300 TA = 25C 200 100 TA = -40C 0 TA = -40C 0 0 0 1 2 3 4 5 6 7 8 9 10 Output Sourcing Current - mA 8 Submit Documentation Feedback 1 2 3 4 5 6 7 Output Sinking Current - mA 8 9 10 TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 TYPICAL CHARACTERISTICS (continued) OUTPUT VOLTAGE vs OUTPUT SOURCING CURRENT OUTPUT VOLTAGE vs OUTPUT SINKING CURRENT 1600 900 VCC = 15 V VCC = 15 V 800 Output Voltage to GND - mV OutputVoltage Voltage to to VCCCC- mV Output - mV 1400 1200 1000 TA = 125C 800 TA = 85C 600 TA = 25C 400 700 600 TA = 125C 500 TA = 85C 400 TA = 25C 300 200 100 200 TA = -40C TA = -40C 0 0 0 1 2 3 4 5 6 7 8 9 0 10 1 3 4 5 6 7 8 9 10 Output Sinking Current - mA Output Sourcing Current - mA Response Time (tPLH) for Various Input Overdrives (VCC = 2.7 V) 20 mV 2 Response Time (tPHL) for Various Input Overdrives (VCC = 2.7 V) 10 mV 100 mV 100 mV 20 mV 10 mV 5 mV 1 V per Division 1 V per Division 5 mV Input 2 s per Division 2 s per Division Submit Documentation Feedback 9 TLV7211,, TLV7211A CMOS COMPARATORS WITH RAIL-TO-RAIL INPUT AND PUSH-PULL OUTPUT www.ti.com SLCS149B - AUGUST 2006 - REVISED JANUARY 2007 TYPICAL CHARACTERISTICS (continued) Response Time (tPHL) for Various Input Overdrives (VCC = 5 V) 100 mV 20 mV 10 mV 5 mV 100 mV 20 mV 10 mV 5 mV 1 V per Division 1 V per Division Response Time (tPLH) for Various Input Overdrives (VCC = 5 V) Input Input 2 s per Division 2 s per Division Response Time (tPLH) for Various Input Overdrives (VCC = 15 V) 100 mV 20 mV 10 mV 5 mV 3 V per Division 3 V per Division 100 mV 20 mV 10 mV 5 mV Response Time (tPHL) for Various Input Overdrives (VCC = 15 V) Input Input 2 s per Division 10 2 s per Division Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 25-Jan-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV7211AID ACTIVE SOIC D 8 TLV7211AIDBVR ACTIVE SOT-23 DBV TLV7211AIDBVRG4 ACTIVE SOT-23 TLV7211AIDCKR ACTIVE TLV7211AIDCKRG4 75 Lead/Ball Finish MSL Peak Temp (3) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211AIDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211AIDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211ID ACTIVE SOIC D 8 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDCKRG4 ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDCKT ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDCKTG4 ACTIVE SC70 DCK 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV7211IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 75 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 25-Jan-2007 TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 9-Jul-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TLV7211AIDBVR SOT-23 DBV 5 3000 178.0 9.0 TLV7211AIDCKR SC70 DCK 6 3000 180.0 TLV7211AIDCKT SC70 DCK 6 250 180.0 TLV7211AIDR SOIC D 8 2500 TLV7211IDBVR SOT-23 DBV 5 TLV7211IDCKR SC70 DCK TLV7211IDCKT SC70 DCK TLV7211IDR SOIC D 3.23 3.17 1.37 4.0 8.0 Q3 8.4 2.25 2.4 1.22 4.0 8.0 Q3 8.4 2.25 2.4 1.22 4.0 8.0 Q3 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 6 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 6 250 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 W Pin1 (mm) Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 9-Jul-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV7211AIDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV7211AIDCKR SC70 DCK 6 3000 202.0 201.0 28.0 TLV7211AIDCKT SC70 DCK 6 250 202.0 201.0 28.0 TLV7211AIDR SOIC D 8 2500 340.5 338.1 20.6 TLV7211IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV7211IDCKR SC70 DCK 6 3000 202.0 201.0 28.0 TLV7211IDCKT SC70 DCK 6 250 202.0 201.0 28.0 TLV7211IDR SOIC D 8 2500 340.5 338.1 20.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated