MBR2040CTL - NEWARK ELECTRONICS

ILLUMINATION

RoHS

COMPLIANT

The LUXEON Rebel general purpose white line of LEDs are ideal for all

lighting and illumination applications. These ux dierentiated parts,

like all other LUXEON Rebel LEDs, provide the industry’s best lumen

maintenance, superior reliability and quality white light that make them

the most widely used power LEDs today.

LUXEON Rebel

General purpose white

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Deliver more usable light and higher ux density Outdoor

Optimize applications to reduce size and cost Specialty

Small footprint to tightly pack the LEDs for mixing

Utilize standard FR4 PCB technology for simplify manufacturing

through the use of surface mount technology

UL-recognized component [E327436]

General Product Information .....................................................................................................................................3

Product Nomenclature .........................................................................................................................................3

Average Lumen Maintenance Characteristics .................................................................................................3

Environmental Compliance ..................................................................................................................................3

Luminous Flux Characteristics ...................................................................................................................................4

Flux Performance, Binning, and Supportability ................................................................................................4

Optical Characteristics ................................................................................................................................................5

Electrical Characteristics .............................................................................................................................................6

Absolute Maximum Ratings .................................................................................................................................7

JEDEC Moisture Sensitivity ..................................................................................................................................7

Reﬂow Soldering Characteristics ..............................................................................................................................8

Mechanical Dimensions ...............................................................................................................................................9

Pad Conﬁguration ...................................................................................................................................................... 10

Solder Pad Design ............................................................................................................................................... 10

Wavelength Characteristics ..................................................................................................................................... 11

Typical Light Output Characteristics over Temperature ................................................................................... 12

Typical Forward Current Characteristics ............................................................................................................. 13

Typical Relative Luminous Flux ............................................................................................................................... 14

Current Derating Curves ......................................................................................................................................... 15

Typical Radiation Patterns ........................................................................................................................................ 17

Emitter Pocket Tape Packaging ................................................................................................................................ 18

Emitter Reel Packaging ............................................................................................................................................. 19

Product Binning and Labeling .................................................................................................................................. 20

Luminous Flux Bins .................................................................................................................................................... 21

Cool-White Bin Structure ................................................................................................................................ 22

Neutral-White Bin Structure ........................................................................................................................... 24

Forward Voltage Bins ................................................................................................................................................. 25

Table of Contents

Product Nomenclature

LUXEON Rebel is tested and binned at 350 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept

at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and

thermal pad temperature are the same.

The part number designation is explained as follows:

L X M L - A B C D - E F G H

Where:

A — designates radiation pattern (value P for Lambertian)

B — designates color (W = White)

C — designates tint variant (C = Cool-White or N = Neutral-White)

D — designates test current (value 1 for 350 mA)

E — reserved for future product offerings

FGH — minimum luminous ﬂux (lm)

Therefore products tested and binned at 350 mA follow the part numbering scheme:

L X M L - P W x 1 - 0 x x x

Average Lumen Maintenance Characteristics

Lumen maintenance for solid-state lighting devices (LEDs) is typically deﬁned in terms of the percentage of initial light output remaining after a

speciﬁed period of time. Lumileds projects that LUXEON Rebel products will deliver, on average, 70% lumen maintenance (L70) at 50,000

hours of operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature

maintained at or below 135°C. This performance is based on independent test data, Lumileds historical data from tests run on similar

material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this

projected lumen maintenance.

Environmental Compliance

Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel is compliant to the

European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH and RoHS directives. Lumileds

will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated

biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

General Product Information

Luminous Flux Characteristics for LUXEON Rebel,

Thermal Pad Temperature=25°C

Table 1.

Performance at Test Current Typical Performance

at Indicated Current

Color Part Number Minimum Luminous Test Typical Luminous Drive

Flux (lm) Current Flux (lm) Current

[1] (mA) FV

[2] (mA)

LXML-PWC1-0090 90 350 160 700

LXML-PWC1-0100 100 350 180 700

LXML-PWC1-0110 110 350 200 700

LXML-PWC1-0120 120 350 220 700

LXML-PWN1-0090 90 350 160 700

LXML-PWN1-0100 100 350 180 700

LXML-PWN1-0110 110 350 200 700

LXML-PWN1-0120 120 350 220 700

Notes for Table 1:

1. Minimum luminous ﬂux performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ± 6.5%

on ﬂux measurements.

2. Typical luminous ﬂux performance when device is operated within published operating conditions.

Flux Performance, Binning, and Supportability

LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of ﬂux performance that is approximately

Gaussian in nature. In order to provide customers with ﬁne granularity within the overall ﬂux distribution, Lumileds separates LEDs into ﬁxed, easy

to design with, minimum luminous ﬂux bins. To verify supportability of parts chosen for your application design, please consult your

Lumileds representative.

Luminous Flux Characteristics

Cool White

Neutral-White

Volume

Luminous Flux Bins

Lambertian LUXEON Rebel at Test Current [1]

Thermal Pad Temperature = 25°C

Table 2.

Typical

Total Typical

Included Viewing

Color Temperature [2, 3, 4] Angle

[6] Angle

[7]

CCT (degrees) (degrees)

Color [7, 8] Min. Typ. Max. u0.90V

[5] 2u 1/2

Cool-White 4500K 6500K 10,000K 160 120

Neutral-White 3500K 4100K 4500K 160 120

Notes for Table 2:

1. Test current is 350 mA for all LXML-PWx1-0xxx products.

2. CCT ±5% tester tolerance.

3. Typical CRI (Color Rendering Index) for cool-white and neutral-white is 70.

4. Minimum CRI (Color Rendering Index) for cool-white and neutral-white is 65.

5. Total angle at which 90% of total luminous ﬂux is captured.

6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.

7. All white products are built with Indium Gallium Nitride (InGaN).

8. Cool-white and neutral-white power light sources represented here are IEC825 class 2 for eye safety.

Optical Characteristics

Electrical Characteristics at 350 mA for LUXEON Rebel,

Part Numbers LXML-PWx1-0xxx, Thermal Pad Temperature = 25ºC

Table 3.

Typical Temperature Typical Thermal

Coefﬁcient of Resistance

Forward Voltage Vf [1] Forward Voltage [2] Junction to

(V) (mV/°C) Thermal Pad (°C/W)

Color Min. Typ. Max. DVf / DTJ Ru J-C

Cool-White 2.55 3.00 3.99 -2.0 to -4.0 10

Neutral-White 2.55 3.00 3.99 -2.0 to -4.0 10

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C = TJ = 110°C at If = 350 mA.

Typical Electrical Characteristics at 700 mA for LUXEON Rebel,

Part Numbers LXML-PWx1-0xxx, Thermal Pad Temperature = 25ºC [2]

Table 4.

Typical Forward Voltage Vf

[1]

Color (V)

Cool-White 3.20

Neutral-White 3.20

Notes for Table 4:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C = TJ = 110°C at If = 700 mA.

Electrical Characteristics

Absolute Maximum Ratings

Table 5.

Parameter Cool-White/Neutral-White

DC Forward Current (mA) 1000

Peak Pulsed Forward Current (mA) 1000

Average Forward Current (mA) 1000

ESD Sensitivity < 8000V Human Body Model (HBM)

Class 2 JESD22-A114-B

< 400V Machine Model (MM)

Class 2 JESD22-A115-B

LED Junction Temperature [1] 150°C

Operating Case Temperature at 350 mA -40°C - 135°C

Storage Temperature -40°C - 135°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reﬂow Cycles 3

Autoclave Conditions 121°C at 2 ATM

100% Relative Humidity for 96 Hours Maximum

Reverse Voltage (Vr) See Note 2

Notes for Table 5:

1. Proper current derating must be observed to maintain junction temperature below the maximum.

2. LUXEON Rebel LEDs are not designed to be driven in reverse bias.

JEDEC Moisture Sensitivity

Table 6.

Soak Requirements

Level Floor Life Standard

Time Conditions Time Conditions

1 unlimited [ 30°C / 168h 85°C / 85%

85% RH + 5 / -0 RH

Table 7.

Proﬁle Feature Lead Free Assembly

Ramp-Up Rate (TL to Tp) 3°C / second max

Preheat Temperature Min (Tsmin) 150°C

Preheat Temperature Max (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 - 180 seconds

Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 60 - 150 seconds

Peak / Classiﬁcation Temperature (TP) 260°C

Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds

Ramp-Down Rate (Tp to TL) 6°C / second max

Time 25°C to Peak Temperature 8 minutes max

Notes for Table 7:

- All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.

Reﬂow Soldering Characteristics

JEDEC 020c

Mechanical Dimensions

Figure 1. Package outline drawing.

Notes for Figure 1:

- Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by

excessive force to the lens.

- Drawings not to scale.

- All dimensions are in millimeters.

- The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.

Pad Conﬁguration

Note for Figure 2:

- The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.

Solder Pad Design

Note for Figure 3:

- The photograph below shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal

resistance of 7K/W.

- Application Brief AB32 provides extensive details for this layout. In addition, the .dwg ﬁles are available at www.lumileds.com.

Figure 2. Pad conﬁguration.

Figure 3. Solder pad layout.

TOP

BOTTOM 3THERMAL

2ANODE

1CATHODE

PADFUNCTION

Wavelength Characteristics

Cool-White at Test Current

Thermal Pad Temperature = 25°C

Neutral-White at Test Current

Thermal Pad Temperature = 25ºC

0.8

istribution

0.4

0.6

0.8

e Spectral Power Distribution

0.2

0.4

0.6

0.8

350 400 450 500 550 600 650 700 750 800

Wavelength (nm)

Relative Spectral Power Distribution

0.2

0.4

0.6

0.8

350 400 450 500 550 600 650 700 750 800

Wavelength (nm)

Relative Spectral Power Distribution

Figure 4a. Cool-white color spectrum of typical CCT part, integrated measurement

0.8

istribution

0.2

0.4

0.6

0.8

e Spectral Power Distribution

0.2

0.4

0.6

0.8

350 400 450 500 550 600 650 700 750 800

Wavelength (nm)

Relative Spectral Power Distribution

0.2

0.4

0.6

0.8

350 400 450 500 550 600 650 700 750 800

Wavelength (nm)

Relative Spectral Power Distribution

Figure 4b. Neutral-white color spectrum of typical CCT part, integrated measurement.

Typical Light Output Characteristics over Temperature

Cool-White and Neutral-White at Test Current

1.2

0.8

inous Flux

0.6

Relative Lu

Neutral-White

0.4 Cool-White

0.2

-20 0 20 40 60 80 100 120 140

Thermal Pad Temperature °C

Figure 5. Relative luminous ﬂux vs. thermal pad temperature.

Typical Forward Current Characteristics

Cool-White and Neutral-White

Thermal Pad Temperature = 25ºC

400

600

800

1000

1200

Forward Current mA

200

2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6

Forward Voltage V

Figure 6. Forward current vs. forward voltage.

Typical Relative Luminous Flux

Typical Relative Luminous Flux vs. Forward Current for Cool-White and

Neutral-White Thermal Pad Temperature = 25°C

0.00

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

2.50

Forward Current (mA)

Normalized Luminous Flux

0 200 400 600 800 1000 1200

Figure 7. Relative luminous ﬂux or radiometric power vs. forward current for cool-white and

neutral-white, Thermal Pad = 25ºC maintained.

Current Derating Curves

Current Derating Curve for 350 mA Drive Current

Cool-White and Neutral-White

Current Derating Curve for 700 mA Drive Current

Cool-White and Neutral-White

1. Current derating curves represent constant current operation condition.

300

350

400

(mA)

100

150

200

250

300

350

400

- Forward Current (mA)

15°C/W

25°C/W

35°C/W

C/W

100

150

200

250

300

350

400

0 25 50 75 100 125 150 175

IF- Forward Current (mA)

TA- Ambient Temperature (°C)

15°C/W

25°C/W

35°C/W

45°C/W

100

150

200

250

300

350

400

0 25 50 75 100 125 150 175

IF- Forward Current (mA)

TA- Ambient Temperature (°C)

15°C/W

25°C/W

35°C/W

45°C/W

Figure 8. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.

700

800

400

500

600

700

800

ward Current (mA)

15°C/W

C/W

100

200

300

400

500

600

700

800

IF- Forward Current (mA)

15°C/W

25°C/W

35°C/W

100

200

300

400

500

600

700

800

0 25 50 75 100 125 150 175

IF- Forward Current (mA)

TA- Ambient Temperature (°C)

15°C/W

25°C/W

35°C/W

Figure 9. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.

Current Derating Curve for 1000 mA Drive Current

Cool-White and Neutral-White

1000

1200

)

600

800

1000

1200

orward Current (mA)

C/W

200

400

600

800

1000

1200

IF- Forward Current (mA)

15°C/W

25°C/W

200

400

600

800

1000

1200

0 25 50 75 100 125 150 175

IF- Forward Current (mA)

TA- Ambient Temperature (°C)

15°C/W

25°C/W

Figure 10. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC.

Typical Radiation Patterns

Typical Spatial Radiation Pattern for Cool-White and

Neutral-White Lambertian

Typical Polar Radiation Pattern for White Lambertain

Angular Displacement (deg)

Relative Intensity (%)

Figure 11a. Typical representative spatial radiation pattern for cool-white and neutral-white lambertian.

0 20% 40% 60% 80% 100%

0º

30º

60º

90º

- 30º

- 60º

- 90º

Figure 11b. Typical polar radiation pattern for cool-white and neutral-white lambertian.

Emitter Pocket Tape Packaging

Figure 13. Emitter pocket tape packaging

1000

Emitter Reel Packaging

Figure 14. Emitter reel packageing

Product Binning and Labeling

Purpose of Product Binning

In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets.

For this reason, Lumileds bins the LED components for luminous ﬂux, color and forward voltage (Vf ).

Decoding Product Bin Labeling

LUXEON Rebel emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a

single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum

mixing and matching of products for consistency in a given application.

Reels of Cool-White and Neutral-White emitters are labeled with a four digit alphanumeric CAT code following the format below.

ABCD

A = Flux bin (J, K, L, M etc.)

B and C = Color bin (W0, U0, V0 etc.)

D = Vf bin (D, E, F, G etc.)

Luminous Flux Bins

Table 8 lists the standard photometric luminous ﬂux bins for LUXEON Rebel emitters (tested and binned at 350 mA).

Although several bins are outlined, product availability in a particular bin varies by production run and by product performance.

Not all bins are available in all colors.

Table 8.

Flux Bins

Minimum Photometric Flux Maximum Photometric Flux

Bin Code (lm) (lm)

H 50 60

J 60 70

K 70 80

L 80 90

M 90 100

N 100 110

X 110 120

P 120 130

Y 130 140

Q 140 150

R 150 160

Cool-White Bin Structure

Figure 15. Cool-White bin structure.

Cool-White LUXEON Rebel emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 4,500K to 10,000K.

Table 9.

Cool-White Bin Coordinates

Typical CCT Typical CCT

Bin Code X Y (K) Bin Code X Y (K)

0.274238 0.300667 0.318606 0.310201

Y0 0.303051 0.332708 8000 WQ 0.329393 0.320211 6000

0.307553 0.310778 0.329544 0.310495

0.282968 0.283772 0.319597 0.301303

0.282968 0.283772 0.328636 0.368952

YA 0.307553 0.310778 8000 VM 0.348147 0.385629 5300

0.311163 0.293192 0.346904 0.371742

0.289922 0.270316 0.328823 0.356917

0.301093 0.342244 0.328823 0.356917

XM 0.313617 0.354992 6700 VN 0.346904 0.371742 5300

0.314792 0.344438 0.345781 0.359190

0.303051 0.332708 0.329006 0.345092

XN 0.314792 0.344438 6700 V0 0.345781 0.359190 5300

0.316042 0.333222 0.344443 0.344232

0.305170 0.322386 0.329220 0.331331

X0 0.316042 0.333222 6700 VP 0.344443 0.344232 5300

0.317466 0.320438 0.343352 0.332034

0.307553 0.310778 0.329393 0.320211

0.307553 0.310778 0.348147 0.385629

XP 0.317466 0.320438 6700 UM 0.367294 0.400290 4750

0.319597 0.301303 0.364212 0.382878

0.311163 0.293192 0.346904 0.371742

0.313617 0.354992 0.346904 0.371742

WM 0.328636 0.368952 6000 UN 0.364212 0.382878 4750

0.328823 0.356917 0.362219 0.371616

0.314792 0.344438 0.345781 0.359190

WN 0.328823 0.356917 6000 U0 0.362219 0.371616 4750

0.329006 0.345092 0.359401 0.355699

0.316042 0.333222 0.344443 0.344232

W0 0.329006 0.345092 6000 UP 0.359401 0.355699 4750

0.329220 0.331331 0.357079 0.342581

0.317466 0.320438 0.343352 0.332034

0.317466 0.320438

WP 0.329220 0.331331 6000

0.329393 0.320211

0.318606 0.310201

Note for Table 9:

- Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.

Neutral-White Bin Structure

Neutral-White LUXEON Rebel emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 3,500K to 4,500K.

Table 10.

Neutral-White Bin Coordinates

Typical CCT Typical CCT

Bin Code X Y (K) Bin Code X Y (K)

0.367294 0.400290 0.378264 0.382458

TM 0.385953 0.412995 4300 S0 0.392368 0.390932 3950

0.381106 0.393747 0.387071 0.373899

0.364212 0.382878 0.374075 0.365822

TN 0.381106 0.393747 4300 SP 0.387071 0.373899 3950

0.378264 0.382458 0.382598 0.359515

0.362219 0.371616 0.370582 0.351953

0.362219 0.371616 0.402270 0.422776

T0 0.378264 0.382458 4300 RM 0.420940 0.432618 3650

0.374075 0.365822 0.414776 0.416097

0.359401 0.355699 0.396279 0.403508

TP 0.374075 0.365822 4300 RN 0.414776 0.416097 3650

0.370582 0.351953 0.408593 0.399525

0.357079 0.342581 0.392368 0.390932

0.385953 0.412995 0.392368 0.390932

SM 0.402270 0.422776 3950 R0 0.408593 0.399525 3650

0.396279 0.403508 0.402113 0.382156

0.381106 0.393747 0.387071 0.373899

SN 0.396279 0.403508 3950 RP 0.402113 0.382156 3650

0.392368 0.390932 0.396564 0.367284

0.378264 0.382458 0.382598 0.359515

Note for Table 10:

- Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.

Figure 16. Neutral-White bin structure.

Forward Voltage Bins

Table 11 lists minimum and maximum Vf bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by

production run and by product performance.

Table 11.

Vf Bins

Minimum Forward Voltage Maximum Forward Voltage

Bin Code (V) (V)

B 2.55 2.79

C 2.79 3.03

D 3.03 3.27

E 3.27 3.51

F 3.51 3.75

G 3.75 3.99

DS64 LUXEON Rebel General Purpose

Product Datasheet 20160427

LUXEON is a registered trademark of the Lumileds Holding B.V.

in the United States and other countries.

lumileds.com

Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,

indirect or consequential, resulting from the use of the provided information and data. Although

Lumileds Holding B.V. has attempted to provide the most accurate information and data, the

materials and services information and data are provided “as is” and Lumileds Holding B.V.

neither warranties, nor guarantees the contents and correctness of the provided information

and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user

agree to this disclaimer and user agreement with the download or use of the provided materials,

information and data.

About Lumileds

Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking

LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.

With a rich history of industry “rsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by

maintaining an unwavering focus on quality, innovation and reliability.

To learn more about our portfolio of light engines, visit lumileds.com.