HALL EFFECT
PROPORTIONAL OUTPUT THUMBWHEEL HALL EFFECT
THUMBWHEEL
HTW
Specifications Subject To Change Without Notice www.ottoexcellence.com 46
3 MILLION CYCLE ROTATIONAL LIFE
The HTW Hall Effect Proportional Output Thumbwheel is a
spring-return-to-center, single axis thumbwheel with an actuator
that provides linear change in voltage output in either direction
from the center. Available with eight output options, including
increasing and decreasing voltage output from the center
position to the full travel position and single or dual (redundant)
outputs. The HTW snaps into a 1.47” x 0.710” panel opening with
rocker switch style mounting. A durable switch providing three
million cycle rotational life, sealed to IP68S and excellent EMI
immunity per MIL-STD-46 ID/SAE J1113-22, and will withstand
RFI of 100V/M 14Hz to 1GHz.
Features:
• 8 output options
• Spring-return-to-center single axis actuator
• Snaps into 1.47” x 0.710” panel opening
• Rocker switch style mounting
• 3 million cycle rotational life
• Electronics sealed to IP68S
• Excellent EMI/RFI immunity
• Detent options available
• RoHS/WEEE/Reach compliant
Paddle
Wheel Style
(with Pins)
Knurled
Wheel Style
(with Wires)
Standard Characteristics/Ratings:
MECHANICAL:
Mechanical Life: 3,000,000 full forward to full back
Mechanical Detent Cycle Life Per Detent: 100,000 (detent @ +/- 21°, full travel is +/- 30° max)
Max Allowable Radial Load: 30.0 lbs.
ELECTRICAL RATINGS: Rated at Vcc = 5V @ 25°C Load = 1mA (4.7KΩ)
Electrical Units Min Typ Max
Supply Voltage VDC 4.5 5 5.5
Output Voltage Tolerance VDC -0.15 N/A +0.15
at Center (see graph for output values) @ 5V Vcc
Output Voltage Tolerance VDC -0.25 N/A +0.25
at Center (for detent version A only) @ 5V Vcc
Output Voltage Tolerance VDC -0.25 N/A +0.25
Full Travel (see graph for output values) @ 5V Vcc
Supply Current Per Sensor mA N/A N/A 10
Reverse Voltage Protection: -5VDC max
ELECTRONICS:
Seal Integrity: Electronics IP68S
ENVIRONMENTAL:
Operating Temp Range: -40°C to +85°C
Humidity: 96% RH, 70°C, 96 hours
Vibration: Per MIL-810F minimum integrity
Sand/Dust: Per SAE J1455
EMI: Withstand per MIL-STD-461D/SAE J1113-22
RFI: Withstand 100V/M 14Hz to 1GHz
MATERIALS:
Button: Thermoplastic
Bezel: Thermoplastic
Snap Arms: Stainless steel
Wires: 18 AWG