CE RS1A THRU RS1K
CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 800 Volts
Forward Current - 1.0Ampere
FEATURES
. For surface mounted applications
. Low profile package
. Built-in strain relief , ideal for automated placement
. Fast switching speed
. Plastic package has Underwrites Laboratory Flammability
Classification 94V-0
. Glass passivated chip junction
. High temperature soldering guaranteed: 250 /10 seconds, at terminals
MECHANICAL DATA
. Case: JEDEC SMA(DO-214AC) molded plastic
. Terminals: Plated axial leads,solderable per MIL-STD-750,method 2026
. Polarity: Color band denotes cathode end
. Weight: 0.002 ounce, 0.064 gram Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive)
load. For capacitive load,derate current by 20%)
Symbols RS1A RS1B RS1D RS1G RS1J Units
Maximum Recurrent peak reverse voltage VRRM 50 100 200 400 600 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 Volts
Maximum average forward
current of TL=90
Peak forward surge current (8.3ms single half
sing wave superimposed on rated load
(JEDEC method) at TL=90
Maximum instantaneous forward voltage at 1.0 A VFVolts
Maximum reverse recovery time(Note 1) TA=25
current at rated DC Blocking Voltage TA=125
R JL
R JA
Typical reverse recovery time(Note 2) Trr 250 500 nS
Notes: 1.Test conditions:IF=0.5A,IR=1.0A,Irr=0.25A.
2.Measured at 1MHz and applied reverse voltage of 4.0 Volts.
3.Thermal resistance from junction to ambient and from junction to lead mounted on PCB mounted on
0.2 X 0.2"(5.0 X 5.0mm) copper pad areas.
IR
I(AV) 1.0 Amp
IFSM Amps
Operating and storage temperature range TJ TSTG -55 to +150
A
50
Typical Thermal Resistance( Note 3) 27.0 30.0 /W
25.0
RS1K
800
560
800
30.0
5.0
150.0
85.0
1.30
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2
CE RS1A THRU RS1K
CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 800 Volts
Forward Current - 1.0Ampere
RATINGS AND CHARACTERISTIC CURVES RS1A THRU RS1K
FLG.1-FORWARD CURRENT FIG.2-MAXIMUM NON-REPETITIVE
DERATING CURVE FORWARD SURGE CURRENT
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS FIG.4-TYPICAL JUNCTION CAPACITANCE
FIG.2-TYPICAL REVERSE CHARACTERISTICS FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2
