74AC14, 74ACT14 Hex Inverter with Schmitt Trigger Input Features General Description ICC reduced by 50% The 74AC14 and 74ACT14 contain six inverter gates each with a Schmitt trigger input. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have a greater noise margin than conventional inverters. Outputs source/sink 24mA 74ACT14 has TTL-compatible inputs The 74AC14 and 74ACT14 have hysteresis between the positive-going and negative-going input thresholds (typically 1.0V) which is determined internally by transistor ratios and is essentially insensitive to temperature and supply voltage variations. Ordering Information Order Number Package Number Package Description 74AC14SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74AC14SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC14MTC 74ACT14SC 74ACT14MTC MTC14 M14A MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input February 2011 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Description In Inputs On Outputs (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 Function Table Input Output A O L H H L www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Parameter Rating Supply Voltage -0.5V to +7.0V DC Input Diode Current VI -0.5V -20mA VI VCC + 1.5 +20mA VI DC Input Voltage -0.5V to VCC + 1.5V IOK DC Output Diode Current VO -0.5V -20mA VO VCC + 0.5V +20mA VO DC Output Voltage -0.5V to VCC + 0.5V IO DC Output Source or Sink Current 50mA ICC or IGND DC VCC or Ground Current per Output Pin Storage Temperature TSTG TJ 50mA -65C to +150C Junction Temperature 140C Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Rating Supply Voltage AC 2.0V to 6.0V ACT 4.5V to 5.5V VI Input Voltage 0V to VCC VO Output Voltage 0V to VCC TA Operating Temperature (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 -40C to +85C www.fairchildsemi.com 3 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input Absolute Maximum Ratings TA +25C VCC Symbol VOH Parameter (V) Minimum HIGH Level 3.0 Output Voltage 4.5 Conditions IOUT -50A 5.5 VOL IIN(3) Vt+ Vt- VH(MAX) Maximum LOW Level Output Voltage ICC 2.9 4.49 4.4 4.4 5.4 5.4 2.56 2.46 4.5 IOH 24mA 3.86 3.76 5.5 IOH 24mA 4.86 4.76 3.0 IOUT 50A (1) 0.002 0.1 0.1 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 0.36 0.44 Units V V 3.0 IOL 12mA 4.5 IOL 24mA 0.36 0.44 5.5 IOL 24mA(1) 0.36 0.44 Maximum Input Leakage Current 5.5 VI VCC, GND 0.1 1.0 A Maximum Positive Threshold 3.0 TA Worst Case V Minimum Negative Threshold Maximum Hysteresis 2.2 2.2 4.5 3.2 3.2 5.5 3.9 3.9 0.5 0.5 4.5 0.9 0.9 5.5 1.1 1.1 1.2 1.2 1.4 1.4 3.0 3.0 TA Worst Case TA Worst Case Minimum Hysteresis 3.0 TA Worst Case 5.5 (3) 2.9 5.49 4.5 IOHD 2.99 IOH 12mA 5.5 IOLD Guaranteed Limits 3.0 4.5 VH(MIN) Typ TA -40C to +85C Minimum Dynamic Output Current (2) Maximum Quiescent 1.6 1.6 0.3 0.3 0.4 0.4 0.5 0.5 V V V 5.5 VOLD 1.65V Max. 75 mA 5.5 VOHD 3.85V Min. -75 mA 5.5 VIN VCC or GND 20.0 A 2.0 Supply Current Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0ms, one output loaded at a time. 3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 4 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input DC Electrical Characteristics for AC VCC (V) Symbol Parameter VIH Minimum HIGH Level Input Voltage 4.5 Maximum LOW Level Input Voltage 4.5 Minimum HIGH Level Output Voltage VIL VOH TA +25C Conditions Typ. TA -40C to +85C Guaranteed Limits VOUT 0.1V or VCC - 0.1V 1.5 2.0 2.0 1.5 2.0 2.0 VOUT 0.1V or VCC - 0.1V 1.5 0.8 0.8 5.5 1.5 0.8 0.8 4.5 IOUT -50A 4.49 4.34 4.4 5.49 5.4 5.4 3.86 3.76 4.86 4.76 0.1 0.1 5.5 5.5 4.5 VIN VIL or VIH, Units V V V IOH -24mA 5.5 VIN VIL or VIH, IOH -24mA(4) VOL Maximum LOW Level Output Voltage 4.5 IOUT 50A 0.001 5.5 4.5 0.001 VIN VIL or VIH, 0.1 0.1 0.36 0.44 0.36 0.44 V IOL 24mA 5.5 VIN VIL or VIH, IOL 24mA(4) IIN VH(MAX) Maximum Input Leakage Current 5.5 VI VCC, GND 0.1 1.0 A Maximum Hysteresis 4.5 TA Worst Case 1.4 1.4 V 1.6 1.6 0.4 0.4 0.5 0.5 2.0 2.0 2.0 2.0 0.8 0.8 5.5 TA Worst Case Minimum Hysteresis 4.5 Maximum Positive Threshold 4.5 Vt- Minimum Negative Threshold 4.5 ICCT Maximum ICC/Input 5.5 VI VCC - 2.1V IOLD Minimum Dynamic Output Current(5) 5.5 Maximum Quiescent Supply Current VH(MIN) 5.5 Vt+ IOHD ICC TA Worst Case 5.5 TA Worst Case 5.5 0.8 0.6 V V V 0.8 1.5 mA VOLD 1.65V Max. 75 mA 5.5 VOHD 3.85V Min. -75 mA 5.5 VIN VCC or GND 20.0 A 2.0 Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time. (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 5 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input DC Electrical Characteristics for ACT TA +25C, CL 50pF Symbol tPLH tPHL Parameter TA -40C to +85C, CL 50pF VCC (V)(6) Min. Typ. Max. Min. Max. Units 3.3 1.5 9.5 13.5 1.5 15.0 ns 5.0 1.5 7.0 10.0 1.5 11.0 3.3 1.5 7.5 11.5 1.5 13.0 5.0 1.5 6.0 8.5 1.5 9.5 Propagation Delay Propagation Delay ns Note: 6. Voltage range 3.3 is 3.3V 0.3V. Voltage range 5.0 is 5.0V 0.5V. AC Electrical Characteristics for ACT TA +25C, CL 50pF Symbol Parameter TA -40C to +85C, CL 50pF VCC (V)(7) Min. Typ. Max. Min. Max. Units tPLH Propagation Delay 5.0 3.0 8.0 10.0 3.0 11.0 ns tPHL Propagation Delay 5.0 3.0 8.0 10.0 3.0 11.0 ns Note: 7. Voltage Range 5.0 is 5.0V 0.5V. Capacitance Symbol Parameter Conditions CIN Input Capacitance VCC OPEN CPD Power Dissipation Capacitance VCC 5.0V AC ACT (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 Typ Units 4.5 pF 25.0 pF 80 www.fairchildsemi.com 6 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input AC Electrical Characteristics for AC 8.75 8.50 0.65 A 7.62 14 8 B 5.60 4.00 3.80 6.00 PIN ONE INDICATOR 1 1.70 7 0.51 0.35 1.27 0.25 (0.33) 1.75 MAX 1.50 1.25 1.27 LAND PATTERN RECOMMENDATION M C B A SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD GAGE PLANE FLASH OR BURRS. D) LANDPATTERN STANDARD: SOIC127P600X145-14M 0.36 E) DRAWING CONFORMS TO ASME Y14.5M-1994 F) DRAWING FILE NAME: M14AREV13 0.50 X 45 0.25 R0.10 R0.10 8 0 0.90 0.50 (1.04) SEATING PLANE DETAIL A SCALE: 20:1 Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 7 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input Physical Dimensions 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input Physical Dimensions (Continued) Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 8 0.65 0.43 TYP 1.65 6.10 0.45 12.00 TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 9 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input Physical Dimensions (Continued) 74AC14, 74ACT14 -- Hex Inverter with Schmitt Trigger Input (c)1988 Fairchild Semiconductor Corporation 74AC14, 74ACT14 * Rev. 1.7.2 www.fairchildsemi.com 10