Vector Signal Analysis Software for PC SignalVu-PC Datasheet Analyze Extensive time-correlated, multi-domain displays connect problems in time, frequency, phase, and amplitude for quicker understanding of cause and effect when troubleshooting Power measurements and signal statistics help you characterize components and systems: ACLR, Multicarrier ACLR, Power vs. Time, CCDF, and OBW/EBW WLAN spectrum and modulation transmitter measurements based on IEEE 802.11 a/b/g/j/p/n/ac standards (Option SV23, SV24, and SV25, or the bundle option SV2C) SignalVu-PC vector signal analysis software helps you easily validate wideband designs. Using the signal analysis engine of the RSA5000/6000 Series and RSA306 USB real-time signal analyzers on your computer or Windows tablet, you can now move your analysis of acquisitions off the instrument, and anywhere. Whether your design validation needs include wideband radar, high data rate satellite links, wireless LAN or frequency-hopping communications, SignalVu-PC vector signal analysis software can speed your time-to-insight by showing you the time-variant behavior of these wideband signals. Key features PC-based multi-domain vector signal analysis for waveforms acquired by Tektronix real-time signal analyzers and oscilloscopes: Tektronix real-time and mixed-domain oscilloscopes (MSO/ DPO3000, MDO/MSO/DPO4000, MSO/DPO5000, DPO7000, DPO/ DSA/MSO70000 Series) Tektronix real-time signal analyzers (RSA3000, RSA5000, RSA6000, SPECMON Series, and RSA306) Turn the MDO4000B into the industry's only 1 GHz Vector Signal Analyzer using the Live Link option (Option CON) Analyze without acquisition hardware present Analyze wideband designs Free up instruments for further use while analysis occurs offline Enable analysis at multiple sites without purchasing additional hardware Bluetooth(R) Transmitter Measurements (Option SV27) based on Bluetooth SIG RF specifications for Basic Rate and Low Energy. Some support of Enhanced Data Rate. Settling time measurements, frequency, and phase (Option SVT) for characterization of wideband frequency-agile oscillators Advanced signal analysis suite (Option SVP) - automated pulse measurements including rise time, pulse width, and pulse-to-pulse phase provide deep insight into pulse train behavior General purpose digital modulation analysis (Option SVM) provides modulation analysis of 23 modulation types Flexible OFDM analysis (Option SVO) of custom OFDM signals Frequency offset control for analyzing baseband signals with nearzero intermediate frequencies (IF) AM/FM/PM modulation and audio measurements (Option SVA) for characterization of analog transmitters and audio signals Simple and complete APCO Project 25 transmitter compliance testing and analysis for Phase 1 (C4FM) and Phase 2 (TDMA) (Opt. SV26) Applications Wideband radar and pulsed RF signals Frequency agile communications Broadband satellite and microwave backhaul links Wireless LAN, Bluetooth, Commercial Wireless Land Mobile Radio (LMR), APCO P25 Education Use your Windows tablet or your powerful PC workstation Windows 7 (64 bit), and Windows 8 (64 bit) versions available www.tektronix.com 1 Datasheet Capture with a variety of tools Analyze Capture once - make multiple measurements without recapturing. Using oscilloscopes, up to four channels can be captured simultaneously; each of which can be independently analyzed by SignalVu-PC software. Channels can be RF, I and Q, or differential inputs. You can also apply math functions to the acquisition before analysis by SignalVu-PC. Acquisition lengths vary depending upon the selected capture bandwidth: fullbandwidth acquisitions can range from 1 ms to 25 ms depending upon model and option selections. Real-time signal analyzer captures range from up to 7.15 seconds at maximum acquisition bandwidth to several hours at reduced bandwidths. SignalVu-PC vector signal analysis software uses the same analysis capabilities found in the RSA5000 and RSA6000 Series real-time signal analyzers. Once captured into memory, SignalVu provides detailed analysis in multiple domains. The spectrogram display (left panel) shows the frequency of an 800 MHz wide LFM pulse changing over time. By selecting the point in time in the spectrogram during the On time of the pulse, the chirp behavior can be seen as it sweeps from low to high (lower right panel). Live Link with the MDO4000B With the Live Link option (Option CON), SignalVu-PC extends the functionality of the Mixed Domain Oscilloscope MDO4000B and turns it into the industry's only 1 GHz Vector Signal Analyzer. SignalVu-PC controls the MDO4000B RF section, acquires the vector-calibrated I/Q data, and makes wide-band, time-correlated, multi-domain measurements. You can analyze, correlate and troubleshoot issues in time, frequency, phase, amplitude, and even modulation without having to sweep since you can acquire up to 1 GHz of bandwidth in one shot. You can leverage the MDO4000B triggering capability and extend your debugging work into system-level troubleshooting of your embedded RF devices. 2 www.tektronix.com Time-correlated measurements can be made of frequency, phase, amplitude, and modulation versus time. This is ideal for signal analysis that includes frequency hopping, pulse characteristics, modulation switching, settling time, bandwidth changes, and intermittent signals. Acquisitions from the RSA306 Spectrum Analyzer and all Tektronix MDO/ MSO/DPO Series oscilloscopes, including the spectrum analyzer in the Mixed Domain Oscilloscope can be analyzed with SignalVu-PC, adding deep analysis capabilities to these broadband acquisition systems. Signals acquired with RSAs and Specmon can also be analyzed with all of the postacquisition analysis capabilities of those instruments. Time-correlated, multi-domain view provides a new level of insight into design or operational problems not possible with conventional analysis solutions. Here, the hop patterns of a narrowband signal can be observed using Spectrogram (lower left) and its hop characteristics can be precisely measured with Frequency vs Time display (upper left). The time and frequency responses can be observed in the two views on the right as the signal hops from one frequency to the next. All of the analysis shown above is available in the free base version of SignalVu-PC. SignalVu-PC Vector Signal Analysis Software Options tailored for your wideband applications The basic SignalVu-PC enables spectrum analysis, RF power and statistics, spectrograms, amplitude, frequency and phase vs. time, and analog modulation measurements. Options are available for WLAN, settling time, audio, modulation, pulse, and OFDM analysis. WLAN transmitter testing With the WLAN measurement options, you can perform standards-based transmitter measurements in the time, frequency, and modulation domains. Option SV23 supports IEEE 802.11a, b, g, j and p signals Option SV24 supports 802.11n 20 MHz and 40 MHz SISO signals Option SV25 802.11ac 20/40/80/160 MHz SISO signals Option SV2C is a bundle of the live link option CON to MDO4000B and all the WLAN measurement options described above (SV23, SV24 and SV25) All modulation formats, as shown in the following table can be measured. Standard Std PHY Wideband satellite and point-to-point microwave links can be directly observed with SignalVu-PC analysis software. Here, General Purpose Digital Modulation Analysis (Option SVM) is demodulating a 16QAM backhaul link running at 312.5 MS/s. Freq band(s) Signal Modulation formats Bandwidth (max) 802.112012 sect ion 802.11b DSSS HR/ 2.4 GHz DSSS DSSS/ CCK 111 Mbps DBSK, 20 MHz DQPSK CCK5.5M, CCK11M 16 & 17 802.11g ERP 2.4 GHz DSSS/ CCK/ PBCC 133 Mbps BPSK DQPSK 20 MHz 17 802.11a OFDM 5 GHz OFDM 64 BPSK <54 Mbps QPSK 16QAM 64QAM 20 MHz 18 20 MHz 19 5, 10, 20 MHz 18 20 802.11g 2.4 GHz 802.11j/p 5 GHz 802.11n HT 2.4 GHz & OFDM 64, 5 GHz 128 150 Mbps BPSK QPSK 16QAM 64QAM 20 , 40 MHz 802.11ac VHT 5 GHz BPSK QPSK 16QAM 64QAM 256QAM 20, 40, 80, 22 160 MHz OFDM 64, 128, 256, 512 867 Mbps Settling time measurements (Option SVT) are easy and automated. The user can select measurement bandwidth, tolerance bands, reference frequency (auto or manual), and establish up to 3 tolerance bands vs. time for Pass/Fail testing. Settling time may be referenced to external or internal trigger, and from the last settled frequency or phase. In the illustration, frequency settling time for a hopped oscillator is measured from an external trigger point from the device under test. www.tektronix.com 3 Datasheet The WLAN presets make the Error Vector Magnitude (EVM), Constellation, and Spectral Emission Mask (SEM) measurements push-button. In addition, you can download the WLAN pre-compliance wizard to easily and quickly prepare for compliance regulatory tests. The Wizard automatically measures Transmit Power, Occupied Bandwidth, Spectral Power Density, Spectral Emission Mask and Spurious Emission Mask. The WLAN RF transmitter measurements are defined by the IEEE 802.112012 revision of the standard. 4 www.tektronix.com SignalVu-PC Vector Signal Analysis Software BluetoothTransmitterTesting With Option SV27, you can perform Bluetooth SIG standard-based transmitter RF measurements in the time, frequency, and modulation domains. This option supports Basic Rate and Low Energy Transmitter measurements defined by Bluetooth SIG Test Specification RF.TS.4.1.1 for Basic Rate and RF-PHY.TS.4.1.1 for Bluetooth Low Energy. Option SV27 also automatically detects Enhanced Data Rate packets, demodulates them and provides symbol information. Pass/Fail results are provided with customizable limits and the Bluetooth presets make the different test set-ups push-button. Below is a summary of the measurements that are automated with option SV27 (unless noted): Bluetooth Low Energy Transmitter Measurements Output power at NOC TRM-LE/CA/01/C and at EOC TRM-LE/CA/ 02/C In-band emission at NOC TRM-LE/CA/03/C and at EOC TRM-LE/ CA/04/C Modulation characteristics TRM-LE/CA/05/C Carrier frequency offset and drift at NOC TRM-LE/CA/06/C and at EOC TRM-LE/CA/07/C Basic Rate Transmitter Measurements Output power TRM/CA/01/C Power Density TRM/CA/02/C (no preset) Power Control TRM/CA/03/C (no preset) Tx output Spectrum - Frequency Range TRM/CA/04/C (no preset) Tx output spectrum - 20dB Bandwidth TRM/CA/05/C Tx output spectrum - Adjacent Channel Power TRM/CA/06/C Modulation characteristics TRM/CA/07/C Initial carrier frequency tolerance TRM/CA/08/C Carrier frequency-drift TRM/CA/09/C The following additional information is also available with Option SV27: symbol table with color coded field information, constellation, eye diagram, frequency deviation vs time with highlighted packet and octet, frequency offset and drift detailed table as well as packet header field decoding. Markers can be used to cross-correlate the time, vector and frequency information. Easy analysis of WLAN 802.11ac transmitter with a WLAN preset that provides spectral emission mask, constellation diagram, and decoded burst information. www.tektronix.com 5 Datasheet Easy validation of Bluetooth transmitter with push button preset, pass/fail information and clear correlation between displays. Education license Qualified educational facilities can cost-effectively use SignalVu-PC in teaching environments. The specially priced education version includes all available analysis options standard and provides results watermarked 'Education Version'. APCO P25 compliance testing and analysis application (Opt. SV26) Complete set of push-button TIA-102 standard-based transmitter measurements with pass/fail results including ACPR, transmitter power and encoder attack times, transmitter throughput delay, frequency deviation, modulation fidelity, symbol rate accuracy, and transient frequency behavior, as well as HCPM transmitter logical channel peak ACPR, off slot power, power envelope, and time alignment. Bluetooth Basic LE TX SIG measurements (Opt. SV27) Presets for transmitter measurements defined by Bluetooth SIG for Basic Rate and Bluetooth Low Energy. Results also include Pass/Fail information. Application also provides Packet Header Field Decoding and can automatically detect the standard including Enhanced Data Rate. AM/FM/PM modulation and audio measurements (Opt. SVA) Carrier power, frequency error, modulation frequency, modulation parameters (peak, peak-peak/2, RMS), SINAD, modulation distortion, S/N, THD, TNHD, hum and noise Settling time (frequency and phase) (Opt. SVT) Measured frequency, Settling time from last settled frequency, Settling time from last settled phase, Settling time from trigger. Automatic or manual reference frequency selection. User-adjustable measurement bandwidth, averaging, and smoothing. Pass/Fail mask testing with 3 user-settable zones Advanced signal analysis (Opt. SVP) Average on power, Peak power, Average transmitted power, Pulse width, Rise time, Fall time, Repetition interval (seconds), Repetition interval (Hz), Duty factor (%), Duty factor (ratio), Ripple (dB), Ripple (%), Droop (dB), Droop (%), Overshoot (dB), Overshoot (%), PulsePulse frequency difference, Pulse-Pulse phase difference, RMS frequency error, Max frequency error, RMS phase error, Max phase error, Frequency deviation, Phase deviation, Impulse response (dB), Impulse response (time), Time stamp Measurement functions Spectrum analyzer measurements (base software) Channel power, Adjacent channel power, Multicarrier adjacent channel Power/Leakage ratio, Occupied bandwidth, xdB down, Marker measurements of power, delta power, integrated power, power density, dBm/ Hz, and dBc/Hz Time domain and statistical measurements (base software) RF IQ vs time, Amplitude vs time, Power vs time, Frequency vs time, Phase vs time, CCDF, Peak-to-Average ratio, Amplitude, Frequency, and Phase modulation analysis WLAN 802.11a/b/g/j/p measurement application (Opt. SV23) All of the RF transmitter measurements as defined in the IEEE standard, and a wide range of additional scalar measurements such as Carrier Frequency error, Symbol Timing error, Average/peak burst power, IQ Origin Offset, RMS/Peak EVM, and analysis displays, such as EVM and Phase/ Magnitude Error vs time/frequency or vs symbols/ subcarriers, as well as packet header decoded information and symbol table. Option SV24 requires option SV23. Option SV25 requires option SV24. WLAN 802.11n measurement application (Opt. SV24) WLAN 802.11ac measurement application (Opt. SV25) 6 www.tektronix.com SignalVu-PC Vector Signal Analysis Software Flexible OFDM analysis (Opt. SVO) OFDM analysis with support for WLAN 802.11a/g/j and WiMAX 802.16-2004. Constellation, Scalar measurement summary, EVM or power vs carrier, Symbol table (Binary or Hexadecimal) General purpose digital modulation analysis (Opt. SVM) Error vector magnitude (EVM) (RMS, Peak, EVM vs Time), Modulation error ratio (MER), Magnitude Error (RMS, peak, mag error vs time),Phase error (RMS, Peak, Phase error vs time), Origin offset, Frequency error, Gain imbalance, Quadrature error, Rho, Constellation, Symbol table. FSK only: Frequency deviation, Symbol timing error The Advanced Signal Analysis package (Option SVP) provides 27 individual measurements to automatically characterize long pulse trains. An 800 MHz wide LFM chirp centered at 18 GHz is seen here with measurements for pulses 7 through 18 (upper right). The shape of the pulse can be seen in the Amplitude vs Time plot shown in the upper left. Detailed views of pulse #8's frequency deviation and parabolic phase trajectory are shown in the lower two views. www.tektronix.com 7 Datasheet Specifications Performance (typical) The following is typical performance of SignalVu-PC analyzing acquisitions from any MSO/DPO5000, DPO7000, or DPO/DSA/MSO70000 Series oscilloscopes. Vector modulation analysis is provided for the MDO4000B spectrum analyzer acquisitions. All other MDO spectrum analysis specifications are available in the MDO4000 datasheet. No published performance is available for MSO/DPO3000/2000 and MDO4000 Series oscilloscope acquisitions. Performance for SignalVu-PC when used with the RSA306 USB real time spectrum analyzer is shown in the RSA306 datasheet. Frequency-related Frequency range See appropriate oscilloscope data sheet Initial center frequency setting Equal to time-base accuracy of oscilloscope accuracy Center frequency setting resolution 0.1 Hz Frequency offset range 0 Hz to the maximum bandwidth of the oscilloscope Frequency marker readout accuracy (Reference Frequency Error x Marker Frequency + 0.001 x Span + 2) Hz Span accuracy 0.3% Reference frequency error Equal to oscilloscope reference frequency accuracy, aging, and drift. Refer to appropriate DPO/DSA/MSO data sheet. 3rd order inter-modulation distortion 1 Center frequency MSO/DPO5000 DPO7000 DPO/DSA/MSO70000 2 GHz -38 dBc -40 dBc -55 dBc 10 GHz -- -- -48 dBc 18 GHz -- -- -50 dBc Span MSO/DPO5000 DPO7000 DPO/DSA/MSO70000 DC - 500 MHz -94 dBm -100 dBm -103 dBm >500 MHz - 3.5 GHz - -102 dBm -103 dBm >3.5 GHz - 14 GHz - - -101 dBm >14 GHz - 20 GHz - - -88 dBm >20 GHz - 25 GHz - - -87 dBm >25 GHz - 33 GHz - - -85 dBm Residual responses 2 DPO/DSA/ MSO70000 series (all spans) DPO7000 series (all spans) MSO/DPO5000 series (all spans) Displayed average noise level 3 -60 dBm -65 dBm -70 dBm 1 Conditions: Each signal level -5 dBm, reference level 0 dBm, 1 MHz tone separation. Math traces off. DPO7054/7104 and MSO/DPO5034/5054/5104 performance not listed. 2 Conditions: RF input terminated, reference level 0 dBm, measurements made after specified oscilloscope warm-up and SPC calibration. Does not include zero Hz spur. 3 Conditions: RF input terminated, 10 kHz RBW, 100 averages, reference level -10 dBm, trace detection average. Measurements made after specified oscilloscope warm-up and SPC calibration. MSO/DPO5034 and MSO/DPO5054 performance not listed. 8 www.tektronix.com SignalVu-PC Vector Signal Analysis Software Performance (typical) Acquisition-related Maximum acquisition time will vary based on the oscilloscope available memory and analog bandwidth. The following table highlights the single-channel capabilities for each model given maximum available memory configuration. Model 4 Max span Max acquisition time at max sample rate Min RBW at max sample rate Min IQ time resolution Max number of FastFrames 5 DPO/DSA73304D 33 GHz 2.5 ms 1.2 kHz 20 ps 65,535 DPO/DSA72504D 25 GHz DPO/DSA/ MSO72004C 20 GHz DPO/DSA/ MSO71604C 16 GHz DPO/DSA/ MSO71254C 12.5 GHz DPO/DSA/ MSO70804C 8 GHz 5 ms 600 Hz 80 ps DPO/DSA/ MSO70604C 6 GHz DPO/DSA/ MSO70404C 4 GHz DPO7354C 3.5 GHz 12.5 ms 300 Hz 50 ps DPO7254C 2.5 GHz DPO7104C 1 GHz DPO7054C 500 MHz MSO/DPO5204 2 GHz MSO/DPO5104 1 GHz MSO/DPO5054 500 MHz MSO/DPO5034 350 MHz 100 ps 25 ms 100 Hz 200 ps 400 ps MDO4000B 3 GHz or 6 GHz 4 Spectrum Analyzer 20 ms 111 Hz 200 ps MSO/DPO/ MDO4000 1 GHz 4 ms 557 Hz 2 ns MSO/DPO2000 200 MHz 1 ms 2.23 kHz 2 ns MSO/DPO3000 500 MHz 2 ms 1.11 kHz 800 ps 4 Maximum span when used as a spectrum analyzer is the entire frequency range of the instrument. 5 Maximum number of frames available will depend upon the oscilloscope record length, sample rate, and the acquisition length settings. Not available www.tektronix.com 9 Datasheet Performance (typical) Analysis-related Frequency (base software) Spectrum (amplitude vs linear or log frequency) Spectrogram (amplitude vs frequency over time) Time and statistics (base software) Amplitude vs time Frequency vs time Phase vs time Amplitude modulation vs time Frequency modulation vs time Phase modulation vs time RF IQ vs time Time overview CCDF Peak-to-Average ratio Settling time, frequency, and phase (Opt. SVT) Frequency settling vs time Advanced measurements suite (Opt. SVP) Pulse results table Phase settling vs time Pulse trace (selectable by pulse number) Pulse statistics (trend of pulse results, FFT of trend, and histogram) Digital demod (Opt. SVM) Constellation diagram EVM vs Time Symbol table (binary or hexadecimal) Magnitude and phase error vs time, and signal quality Demodulated IQ vs time Eye diagram Trellis diagram Frequency deviation vs time Flexible OFDM (Opt. SVO) EVM vs Symbol, vs Subcarrier Subcarrier power vs symbol, vs subcarrier Subcarrier constellation Symbol data table Mag error vs Symbol, vs Subcarrier Phase error vs Symbol, vs Subcarrier Channel frequency response 10 www.tektronix.com SignalVu-PC Vector Signal Analysis Software Performance (typical) WLAN measurements (Opt. SV23, SV24, SV25 or SV2C) Burst index Burst power Peak to average burst power IQ origin offset Frequency error Common pilot error Symbol clock error RMS and Peak EVM for Pilots/Data Peak EVM located per symbol and subcarrier Packet header format information Average power and RMS EVM per section of the header WLAN power vs Time or vs Symbol Burst Width WLAN symbol table WLAN Constellation Spectrum emission mask Spurious EVM vs symbol (or time), vs subcarrier (or frequency) Mag error vs symbol (or time), vs subcarrier (or frequency) Phase error vs symbol (or time), vs subcarrier (or frequency) WLAN channel frequency response vs symbol (or time), vs subcarrier (or frequency) WLAN spectral flatness vs symbol (or time), vs subcarrier (or frequency) APCO P25 measurement application (Opt. SV26) RF output power, operating frequency accuracy, modulation emission spectrum, unwanted emissions spurious, adjacent channel power ratio, frequency deviation, modulation fidelity, frequency error, eye diagram, symbol table, symbol rate accuracy, transmitter power and encoder attack time, transmitter throughput delay, frequency deviation vs. time, power vs. time, transient frequency behavior, HCPM transmitter logical channel peak adjacent channel power ratio, HCPM transmitter logical channel off slot power, HCPM transmitter logical channel power envelope, HCPM transmitter logical channel time alignment, cross-correlated markers Bluetooth Basic LE Tx Measurements (Opt. SV27) Peak Power, Average Power, Adjacent Channel Power or InBand Emission mask, -20dB Bandwidth, Frequency Error, Modulation Characteristics including F1avg (11110000), F2avg (10101010), F2 > 115 kHz, F2/F1 ratio, frequency deviation vs. time with packet and octet level measurement information, Carrier Frequency f0, Frequency Offset (Preamble and Payload), Max Frequency Offset, Frequency Drift f1-f0, Max Drift Rate fn-f0 and fn-fn-5, Center Frequency Offset Table and Frequency Drift table, color-coded Symbol table, Packet header decoding information, eye diagram, constellation diagram, editable limits www.tektronix.com 11 Datasheet RF and spectrum analysis performance Resolution bandwidth Resolution bandwidth (spectrum analysis) 1, 2, 3, 5 sequence, auto-coupled, or user selected (arbitrary) Resolution bandwidth shape Approximately Gaussian, shape factor 4.1:1 (60:3 dB) 10%, typical Resolution bandwidth accuracy 1% (auto-coupled RBW mode) Alternative resolution bandwidth types Kaiser window (RBW), -6 dB Mil, CISPR, Blackman-Harris 4B window, Uniform window (none), flat-top window (CW ampl.), Hanning window Video bandwidth Video bandwidth range Dependent on oscilloscope record length setting. approximately 500 Hz to 5 MHz RBW/VBW maximum 10,000:1 RBW/VBW minimum 1:1 Resolution 5% of entered value Accuracy (typical) 10% Time domain bandwidth (amplitude vs. time display) Time domain bandwidth range At least 1/2 to 1/10,000 of acquisition bandwidth Time domain bandwidth shape Approximately Gaussian, shape factor 4.1:1(60:3 dB), 10% typical Shape factor <2.5:1 (60:3 dB) typical for all bandwidths Time domain bandwidth accuracy 10% Spectrum display traces, detectors, and functions Traces Three traces + 1 math trace + 1 trace from spectrogram for spectrum display Detector Peak, -peak, average, CISPR peak Trace functions Normal, Average, Max Hold, Min Hold Spectrum trace length 801, 2401, 4001, 8001, or 10401 points AM/FM/PM modulation and audio measurements (Opt. SVA) 6 Analog demodulation 7 Carrier frequency range 1 kHz or (1/2 x audio analysis bandwidth) to maximum input frequency Maximum audio frequency span 10 MHz Audio filters Low pass (kHz) 0.3, 3, 15, 30, 80, 300, and user-entered up to 0.9 x audio bandwidth High pass (Hz) 20, 50, 300, 400, and user-entered up to 0.9 x audio bandwidth Standard CCITT, C-Message De-emphasis (s) 25, 50, 75, 750, and user-entered File User-supplied .TXT or .CSV file of amplitude/frequency pairs. Maximum 1000 pairs. 6 All published performance based on conditions of Input Signal: 0 dBm, Input Frequency: 100 MHz, RBW: Auto, Averaging: Off, Filters: Off. Sampling and input parameters optimized for best results. 7 Sampling rates of the oscilloscope are recommended to be adjusted to no more than 10X the audio carrier frequency for modulated signals, and 10X the audio analysis bandwidth for direct input audio. This reduces the length of acquisition required for narrow-band audio analysis. 12 www.tektronix.com SignalVu-PC Vector Signal Analysis Software AM/FM/PM modulation and audio measurements (Opt. SVA) FM modulation analysis FM measurements, Carrier power, carrier frequency error, audio frequency, deviation (+peak, -peak, peak-peak/2, RMS), SINAD, modulation distortion, S/N, total harmonic distortion, total non-harmonic distortion, hum and noise FM deviation accuracy 1.5% of deviation FM rate accuracy 1.0 Hz Carrier frequency accuracy 1 Hz + (transmitter frequency x reference frequency error) Residuals (FM) (rate: 1 kHz to 10 kHz, deviation: 5 kHz) THD 0.2% (MSO/DPO7000, 70000 Series) 1.0% (MSO/DPO5000 Series) 1.0% (MDO4000B Series) SINAD 44 dB (MSO/DPO7000, 70000 Series) 38 dB (MSO/DPO5000 Series) 38 dB (MDO4000B Series) AM modulation analysis AM measurements Carrier power, audio frequency, modulation depth (+peak, -peak, peak-peak/2), RMS, SINAD, modulation distortion, S/N, total harmonic distortion, total non-harmonic distortion, hum and noise AM depth accuracy (rate: 1 kHz, depth: 50%) 1% + 0.01 x measured value AM rate accuracy (rate: 1 kHz, depth: 50%) 1.0 Hz Residuals (AM) THD 0.3% (MSO/DPO7000, 70000 Series) 1.0% (MSO/DPO5000 Series) 1.0% (MDO4000B Series) SINAD 48 dB (MSO/DPO7000, 70000 Series) 43 dB (MSO/DPO5000 Series) 43 dB (MDO4000B Series) PM modulation analysis PM measurement Carrier power, carrier frequency error, audio frequency, deviation (+peak, -peak, peak-peak/2, RMS), SINAD, modulation distortion, S/N, total harmonic distortion, total non-harmonic distortion, hum and noise PM deviation accuracy (rate: 1 kHz, deviation: 0.628 rad) 100% x (0.01 + (rate / 1 MHz)) PM rate accuracy (rate: 1 kHz, deviation: 0.628 rad) 1 Hz Residuals (PM) THD 0.1% (MSO/DPO7000, 70000 Series) 0.5% (MSO/DPO5000 Series) 0.5% (MDO4000B Series) SINAD 48 dB (MSO/DPO7000, 70000 Series) 43 dB (MSO/DPO5000 Series) 43 dB (MDO4000B Series) www.tektronix.com 13 Datasheet AM/FM/PM modulation and audio measurements (Opt. SVA) Direct audio input Audio measurements Signal power, audio frequency (+peak, -peak, peak-peak/2, RMS), SINAD, modulation distortion, S/N, total harmonic distortion, total non-harmonic distortion, hum and noise Direct input frequency range 1 Hz to 10 MHz (for audio measurements only) Maximum audio frequency span 10 MHz Audio frequency accuracy 1 Hz Residuals (PM) THD 1.5% SINAD 38 dB Minimum audio analysis bandwidth and RBW vs. oscilloscope memory and sample rate (Opt. SVA) Model Sample rate: 1 GS/s Standard memory Maximum memory Standard memory Maximum memory Min. Aud. BW RBW (Auto) Min. Aud. BW RBW (Auto) Min. Aud. BW RBW (Auto) Min. Aud. BW RBW (Auto) MSO/ DPO 5034 MSO/DPO 5054 200 kHz 400 Hz 20 kHz 40 Hz 1 MHz 2 kHz 100 kHz 200 hz MSO/DPO 5104 MSO/DPO 5204 100 kHz 200 Hz 10 kHz 20 hz 1 MHz 2 kHz 100 kHz 200 Hz DPO 7000 50 kHz 100 Hz 50 kHz 100 Hz 2 MHz 4 kHz 2 MHz 4 kHz DPO/DSA/ 200 kHz MSO 70000 12.5 GHz BW 400 Hz 10 kHz 20 Hz not recommended >4 kHz 1 MHz 2 kHz DPO/DSA/ 200 kHz MSO 70000 <12.5 GHz BW 400 Hz 20 kHz 40 Hz not recommended >4 kHz 500 kHz 1 kHz Minimum audio analysis bandwidth for MDO4000B RF input 7.8 kHz Minimum audio analysis RBW for MDO4000B RF input 15 Hz (Span set to minimum 1 kHz) 14 www.tektronix.com Sample rate: maximum SignalVu-PC Vector Signal Analysis Software Settling time, frequency, and phase (Opt. SVT) 8 Settled frequency uncertainty, Measurement frequency: 1 GHz Measurement frequency: 9 GHz Averages Frequency uncertainty at stated measurement bandwidth 1 GHz 100 MHz 10 MHz 1 MHz Single measurement 20 kHz 2 kHz 500 Hz 100 Hz 100 averages 10 kHz 500 Hz 200 Hz 50 Hz 1000 averages 2 kHz 200 Hz 50 Hz 10 Hz Averages Frequency uncertainty at stated measurement bandwidth 1 GHz 100 MHz 10 MHz 1 MHz Single Measurement 20 kHz 5 kHz 2 kHz 200 Hz 100 Averages 10 kHz 2 kHz 500 Hz 50 Hz 1000 Averages 2 kHz 500 Hz 200 Hz 20 Hz Averages Phase uncertainty at stated measurement bandwidth Settled phase uncertainty, Measurement frequency: 1 GHz Measurement frequency: 9 GHz 1 GHz 100 MHz 10 MHz 1 MHz Single measurement 2 2 2 2 100 averages 0.5 0.5 0.5 0.5 1000 averages 0.2 0.2 0.2 0.2 Averages Phase uncertainty at stated measurement bandwidth 1 GHz 100 MHz 10 MHz 1 MHz Single measurement 5 5 5 5 100 averages 2 2 2 2 1000 averages 0.5 0.5 0.5 0.5 Advanced measurement suite (Opt. SVP) General characteristics 8 Measurements Average On Power, Peak Power, Average Transmitted Power, Pulse Width, Rise Time, Fall Time, Repetition Interval (seconds), Repetition Interval (Hz), Duty Factor (%), Duty Factor (ratio), Ripple (dB), Ripple (%), Droop (dB), Droop (%), Overshoot (dB), Overshoot (%), Pulse-Pulse Frequency Difference, Pulse-Pulse Phase Difference, RMS Frequency Error, Max Frequency Error, RMS Phase Error, Max Phase Error, Frequency Deviation, Phase Deviation, Impulse Response (dB), Impulse Response (time), Time Stamp Number of pulses 1 to 10,000 System rise time (typical) Equal to oscilloscope rise time Settled Frequency or Phase at the measurement frequency. Measured signal level > -20 dBm, Attenuator: Auto. www.tektronix.com 15 Datasheet Advanced measurement suite (Opt. SVP) Minimum pulse width for detection 9 Model Minimum PW DPO/DSA72004B MSO72004 400 ps DPO/DSA71604B MSO71604 500 ps DPO/DSA71254B MSO71254 640 ps DPO/DSA70804B MSO70804 1 ns DPO/DSA70604B MSO70604 1.3 ns DPO/DSA70404B MSO70404 2 ns DPO7354 2.25 ns DPO7254 3 ns DPO7104 8 ns DPO7054 16 ns MSO/DPO5204 4 ns MSO/DPO5104 8 ns MSO/DPO5054 16 ns MSO/DPO5034 25 ns MDO4000B 5 ns Pulse measurement accuracy (typical) 10 Average on power 0.3 dB + Absolute Amplitude Accuracy of oscilloscope Average transmitted power 0.4 dB + Absolute Amplitude Accuracy of oscilloscope Peak power 0.4 dB + Absolute Amplitude Accuracy of oscilloscope Pulse width (3% of reading + 0.5 x sample period) Pulse repetition rate (3% of reading + 0.5 x sample period) Digital modulation analysis (Opt. SVM) Modulation formats /2DBPSK, BPSK, SBPSK, QPSK, DQPSK, /4DQPSK, D8PSK, 8PSK, OQPSK, SOQPSK, CPM, 16/32/64/128/256QAM, MSK, GMSK, GFSK, 2-FSK, 4-FSK, 8-FSK, 16-FSK, C4FM, D16PSK, 16APSK, and 32APSK Analysis period Up to 80,000 samples Measurement filters Square-root raised cosine, raised cosine, Gaussian, rectangular, IS-95, IS-95 EQ, C4FM-P25, half-sine, None, User Defined Reference filters Raised cosine, Gaussian, rectangular, IS-95, SBPSK-MIL, SOQPSK-MIL, SOQPSK-ARTM, None, User Defined Alpha/B x T range 0.001 to 1, 0.001 step Constellation, Error vector magnitude (EVM) vs time, Modulation error ratio (MER), Magnitude error vs time, Phase error vs time, Signal quality, Symbol table rhoFSK only: Frequency deviation, Symbol timing error 9 Conditions: Approximately equal to 10/(IQ sampling rate). IQ sampling rate is the final sample rate after digital down conversion from the oscilloscope. Pulse measurement filter set to max bandwidth. 10 Conditions: Pulse Width > 450 ns, S/N Ratio 30 dB, Duty Cycle 0.5 to 0.001, Temperature 18 C to 28 C. 16 www.tektronix.com SignalVu-PC Vector Signal Analysis Software Digital modulation analysis (Opt. SVM) Symbol rate range 1 kS/s to (0.4 * Sample Rate) GS/s (modulated signal must be contained entirely within the acquisition bandwidth) Adaptive equalizer Type Linear, decision-directed, feed-forward (FIR) equalizer with coefficient adaptation and adjustable convergence rate Modulation types supported /2 DBPSK, BPSK, SBPSK, QPSK, DQPSK, /4 DQPSK, D8PSK, 8PSK, D16PSK, OQPSK, SOQPSK, CPM, 16/32/64/128/256QAM, MSK, 2-FSK, 4-FSK, 8-FSK, 16-FSK, C4FM Reference filters for all modulation types except OQPSK Raised Cosine, Rectangular, None Reference filters for OQPSK Raised Cosine, Half Sine Filter length 1-128 taps Taps/symbol: raised cosine, half sine, no filter 1, 2, 4, 8 Taps/symbol: rectangular filter 1 Equalizer controls 16QAM Residual EVM (typical) for DPO7000 and DPO/DSA/MSO70000 series 11 16QAM Residual EVM (typical) for MSO/DPO5000 series 12 Off, Train, Hold, Reset Symbol Rate RF IQ 100 MS/s <2.0% <2.0% 312.5 MS/s <3.0% <3.0% Symbol Rate RF IQ 10 MS/s 1.5% 1.0% 100 MS/s 4.0% 2.0% OFDM residual EVM, 802.11g Signal at 2.4 GHz, input level optimized for best performance DPO7000 Series -33 dB DPO/DSA/MSO70000 Series -38 dB QPSK Residual EVM (typical) for MDO4000B RF Input 13 Single Carrier, measured at 1GHz 0.1 MSymbols/sec rate 0.26% 10 MSymbols/sec rate 0.28 % 100 MSymbols/sec rate 1.0 % 312.5 MSymbols/sec rate 3.0 % 11 CF = 1 GHz, Measurement Filter = root raised cosine, Reference Filter = raised cosine, Analysis Length = 200 symbols. 12 Carrier frequency 700 MHz. MSO/DPO5054 and MSO/DPO5034 performance not listed. Use of external reference will degrade EVM performance. 13 Measurement filter = root raised cosine, reference filter = raised cosine, analysis Length = 400 symbols, 20 averages www.tektronix.com 17 Datasheet WLAN IEEE802.11a/b/g/j/p (Opt. SV23) General characteristics Modulation formats DBPSK (DSSS1M), DQPSK (DSSS2M), CCK5.5M, CCK11M , OFDM (BPSK, QPSK, 16 or 64QAM) Measurements and displays Burst Index, Burst Power, Peak to Average Burst Power, IQ Origin Offset, Frequency Error, Common Pilot Error, Symbol Clock Error RMS and Peak EVM for Pilots/Data, Peak EVM located per Symbol and Subcarrier Packet Header Format Information Average Power and RMS EVM per section of the header WLAN Power vs Time, WLAN Symbol Table, WLAN Constellation Spectrum Emission Mask 14, Spurious Error Vector Magnitude (EVM) vs Symbol (or Time), vs Subcarrier (or Frequency) Mag Error vs Symbol (or Time), vs Subcarrier (or Frequency) Phase Error vs Symbol (or Time), vs Subcarrier (or Frequency) WLAN Channel Frequency Response vs Symbol (or Time), vs Subcarrier (or Frequency) WLAN Spectral Flatness vs Symbol (or Time), vs Subcarrier (or Frequency) Typical residual EVM - 802.11b RMS-EVM over 1000 chips, EQ On (CCK-11Mbps) with 1.04% (2.4 GHz) MDO4000B 15 Typical residual EVM -44 dB (2.4 GHz) 802.11a/g/j (OFDM, 20 MHz, 64-43 dB (5.8 GHz) QAM), with MDO4000B 15 (RMS-EVM averaged over 20 bursts, 16 symbols each) 14 SEM is specified with noise reduction and at least 30 averages for 802.11a/n/ac signals in 5 GHz band. Residual noise performance of the MDO4000B may exceed SEM mask at frequency above 5.85 GHz 15 Signal input power optimized for best EVM 18 www.tektronix.com SignalVu-PC Vector Signal Analysis Software WLAN IEEE802.11n (Opt. SV24) General characteristics Modulation formats SISO, OFDM (BPSK, QPSK, 16 or 64QAM) Measurements and displays Burst Index, Burst Power, Peak to Average Burst Power, IQ Origin Offset, Frequency Error, Common Pilot Error, Symbol Clock Error, RMS and Peak EVM for Pilots/Data, Peak EVM located per Symbol and Subcarrier Packet Header Format Information Average Power and RMS EVM per section of the header WLAN Power vs Time, WLAN Symbol Table, WLAN Constellation Spectrum Emission Mask 16, Spurious Error Vector Magnitude (EVM) vs Symbol (or Time), vs Subcarrier (or Frequency) Mag Error vs Symbol (or Time), vs Subcarrier (or Frequency) Phase Error vs Symbol (or Time), vs Subcarrier (or Frequency) WLAN Channel Frequency Response vs Symbol (or Time), vs Subcarrier (or Frequency) WLAN Spectral Flatness vs Symbol (or Time), vs Subcarrier (or Frequency) Typical residual EVM - 802.11n -41 dB typical (5.8 GHz) (40 MHz QAM) with -42 dB (2.4 GHz) MDO4000B 17 (RMS-EVM averaged over 20 bursts, 16 symbols each) WLAN IEEE802.11ac (Opt. SV25) General characteristics Modulation formats SISO, OFDM (BPSK, QPSK, 16/64/256QAM) Measurements and displays Burst Index, Burst Power, Peak to Average Burst Power, IQ Origin Offset, Frequency Error, Common Pilot Error, Symbol Clock Error, RMS and Peak EVM for Pilots/Data, Peak EVM located per Symbol and Subcarrier Packet Header Format Information Average Power and RMS EVM per section of the header WLAN Power vs Time, WLAN Symbol Table, WLAN Constellation Spectrum Emission Mask 18, Spurious Error Vector Magnitude (EVM) vs Symbol (or Time), vs Subcarrier (or Frequency) Mag Error vs Symbol (or Time), vs Subcarrier (or Frequency) Phase Error vs Symbol (or Time), vs Subcarrier (or Frequency) WLAN Channel Frequency Response vs Symbol (or Time), vs Subcarrier (or Frequency) WLAN Spectral Flatness vs Symbol (or Time), vs Subcarrier (or Frequency) Typical residual EVM 802.11ac (160 MHz 256-QAM) with MDO4000B 19 -37.3 dB (5.8 GHz), RMS-EVM averaged over 20 bursts, 16 symbols each 16 SEM is specified with noise reduction and at least 30 averages for 802.11a/n/ac signals in 5 GHz band. Residual noise performance of the instrument may exceed SEM mask at frequency above 5.85 GHz 17 Signal input power optimized for best EVM 18 SEM is specified with noise reduction and at least 30 averages for 802.11a/n/ac signals in 5 GHz band. Residual noise performance of the instrument may exceed SEM mask at frequency above 5.85 GHz 19 Signal input power optimized for best EVM www.tektronix.com 19 Datasheet APCO P25 (Opt. SV26) Modulation formats Phase 1 (C4FM), Phase 2 (HCPM, HDQPSK) Measurements and displays RF output power, operating frequency accuracy, modulation emission spectrum, unwanted emissions spurious, adjacent channel power ratio, frequency deviation, modulation fidelity, frequency error, eye diagram, symbol table, symbol rate accuracy, transmitter power and encoder attack time, transmitter throughput delay, frequency deviation vs. time, power vs. time, transient frequency behavior, HCPM transmitter logical channel peak adjacent channel power ratio, HCPM transmitter logical channel off slot power, HCPM transmitter logical channel power envelope, HCPM transmitter logical channel time alignment Residual modulation fidelity (with MDO4000B) Phase 1 (C4FM) 1.0% typical Phase 2 (HCPM) 0.5% typical Phase 2 (HDQPSK) 0.5% typical Adjacent channel power ratio 25 kHz offset from the center and bandwidth of 6 kHz 20 Phase 1 (C4FM): -76 dBc typical Phase 2 (HCPM): -74 dBc typical Phase 2 (HDQPSK): -74 dBc typical 62.5 kHz offset from the center Phase 1 (C4FM): -77 dBc typical and bandwidth of 6 kHz Phase 2 (HCPM): -78 dBc typical Phase 2 (HDQPSK): -76 dBc typical Bluetooth (Opt. SV27) Modulation formats Basic Rate, Bluetooth Low Energy, Enhanced Data Rate - Revision 4.1.1 Measurements and displays Peak Power, Average Power, Adjacent Channel Power or InBand Emission mask, -20 dB Bandwidth, Frequency Error, Modulation Characteristics including F1avg (11110000), F2avg (10101010), F2 > 115 kHz, F2/F1 ratio, frequency deviation vs. time with packet and octet level measurement information, Carrier Frequency f0, Frequency Offset (Preamble and Payload), Max Frequency Offset, Frequency Drift f1-f0, Max Drift Rate fn-f0 and fn-fn-5, Center Frequency Offset Table and Frequency Drift table, color-coded Symbol table, Packet header decoding information, eye diagram, constellation diagram Output power (Average and Peak Power) Level uncertainty Refer to instrument amplitude and flatness specification Measurement range Signal level > -70 dBm (for RSA306) and -60 dBm (for MDO4000B) Modulation Characteristics (F1avg, F2avg, F2avg/F1avg, F2max 115 kHz) Deviation range 280 kHz Deviation uncertainty (at 0 dBm) < 2 kHz + instrument frequency uncertainty (Basic Rate) < 3 kHz + RSA306 frequency uncertainty (for RSA306 and Low Energy) < 4 kHz + MDO4000B frequency uncertainty (for MDO4000B and Low Energy) 20 Measured with test signal amplitude adjusted for optimum performance if necessary. Measured with Averaging, 10 waveforms. 20 www.tektronix.com SignalVu-PC Vector Signal Analysis Software Measurement resolution 10 Hz Measurement range Nominal channel frequency 100 kHz Initial Carrier Frequency Tolerance (ICFT) Measurement uncertainty (at 0 dBm) < 1 kHz + RSA306 frequency uncertainty (for RSA306) Measurement resolution 10 Hz Measurement range Nominal channel frequency 100 kHz < 1.5 kHz + MDO4000B frequency uncertainty (for MDO4000B) Carrier Frequency Drift (Max freq. offset, drift f1- f0, max drift fn-f0, max drift fn-fn-5 (50 s)) Measurement uncertainty < 2 kHz + instrument frequency uncertainty Measurement resolution 10 Hz Measurement range Nominal channel frequency 100 kHz In-band Emissions and ACP Level uncertainty Refer to instrument amplitude and flatness specification Mapping and field strength (Option MAP) RF field strength Signal strength indicator Located at right-side of display Measurement bandwidth Up to 165 MHz, dependent on span and RBW setting Tone type Variable frequency Mapping Map types directly supported Pitney Bowes MapInfo (*.mif), Bitmap (*.bmp) Saved measurement results Measurement data files (exported results) Map file used for the measurements Google earth KMZ file Recallable results files (trace and setup files) MapInfo-compatible MIF/MID files General characteristics Option CON Update rate Programmatic interface Provides the Live Link to the MDO4000B < 0.2 /sec (802.11ac EVM, acq BW: 200 MHz, record length: 400 s) SCPI-compliant command set. Requires installation of Tektronix Virtual Instrument Software Architecture (VISA) drivers www.tektronix.com 21 Datasheet System requirements Operating systems Windows 8 x64 Windows 7 Service Pack 1 x64 Disk space 6 GB free on C: drive RAM 1 GB (4 GB recommended) Operation with the RSA306 USB real-time spectrum analyzer has additional requirements. See the RSA306 data sheet for details. Instruments and file types supported Instrument family Oscilloscopes File type .WFM Performance: MSO/DPO5000 DPO7000 DPO/DSA/ MSO70000 .ISF X X Mixed-domain: MDO4000 & MDO4000B X Bench: MSO/ DPO2000/3000 MSO/DPO4000 X Real-time signal analyzers .TIQ .MAT .IQT .MAT X 22 File type .WFM .ISF .TIQ RSA3000 X RSA5000/ 6000 Other X X File type .WFM .ISF 3rd party waveforms in MATLAB Level 5 format SignalVu-PC vs. SignalVu .IQT 21 .TIQ .IQT .MAT X SignalVu for oscilloscopes is a separate product made to run directly on Tektronix performance oscilloscopes. SignalVu directly controls the acquisition settings of the oscilloscopes and automatically transfers data from the oscilloscope acquisition channel to the SignalVu software. SignalVu-PC runs on a separate PC. Files from oscilloscopes and signal analyzers can be opened and analyzed. SignalVu-PC does not communicate with the acquisition instrument or control its acquisition settings. 21 .TIQ files can be created on performance oscilloscopes with SignalVu installed. SignalVu is a separate product from SignalVu-PC. 22 The MDO RF channel saves waveforms in the .TIQ format. MDO oscilloscope waveforms are stored in .ISF format. 22 www.tektronix.com SignalVu-PC Vector Signal Analysis Software Ordering information SignalVu-PC SVE is a free program and is available for download at www.tektronix.com/downloads and is required for all options. SignalVu-PCEDU is a separate version that includes all analysis options for educational institutions. Purchasing, licensing and activation SignalVu-PC is available for download at www.tektronix.com/downloads. Purchasers can specify whether to receive option activation keys electronically or through physical media. Purchasers of SignalVu-PC options receive activation codes for each option purchased. Activation of purchased licenses requires internet access. In secure applications, activation can be performed on an internet-enabled PC and applied to a secure PC without internet access. SignalVu-PCEDU education licenses require internet access by the PC on which they are installed. Licensing is perpetual and no maintenance contract is offered or required. Licenses can be deactivated and re-applied to a new PC should you need to move the software. Owners of SignalVu-PC and SignalVu-PCEDU can download any bug fixes or enhancements to existing products free of charge. New options with new measurements may become available and upgrades can be purchased to add the new functionality. Demonstration Version of SignalVu-PC SignalVu-PC demonstration software is available at www.tektronix.com/downloads. Demonstration licenses can be activated immediately with no internet connection required and are valid for 30 days after activation. SignalVu-PC-SVE Vector Signal Analysis Software SignalVu-PC-SVE is available as a free download from Tektronix.com. The options shown below can be added to any copy of SignalVu-PC. Opt. CON SignalVu-PC live link to the MDO4000B series Opt. SV23 WLAN 802.11a/b/g/j/p measurement application Opt. SV24 WLAN 802.11n measurement application (requires opt SV23) Opt. SV25 WLAN 802.11ac measurement application (requires opt SV24) Opt. SV2C Live Link to MDO4000B and WLAN 802.11a/b/g/j/p/n/ac measurements (includes options CON, SV23, SV24 and SV25) Opt. SV26 APCO P25 measurement application Opt. SV27 Bluetooth Basic LE Tx measurements Opt. SVP Advanced signal analysis (including pulse measurements) Opt. SVM General purpose digital modulation analysis Opt. SVT Settling time, frequency, and phase Opt. SVO Flexible OFDM with support for 802.11a/j/g and 802.16-2044 (fixed WiMAX) modulation types Opt. SVA AM/FM/PM modulation and audio measurements Opt. MAP Mapping and signal strength SHIP Activation keys, software CD, and instructions shipped in hard copy. Activation keys are also e-mailed. NO SHIP Software and support materials are downloaded from Tektronix.com and activation keys are e-mailed. SignalVu-PCEDU Vector Signal Analysis Software, Education Version SignalVu-PCEDU is required. SHIP Activation keys, software CD, and instructions shipped in hard copy. Activation keys are also e-mailed NO SHIP Software and support materials are downloaded from Tektronix.com and activation keys are e-mailed www.tektronix.com 23 Datasheet SVPCUP SignalVu-PC upgrades SignalVu-PC-SVE is required. Opt. SV23 WLAN 802.11a/b/g/j/p measurement application Opt. SV24 WLAN 802.11n measurement application (requires opt SV23) Opt. SV25 WLAN 802.11ac measurement application (requires opt SV24) Opt. SV26 APCO P25 measurement application Opt. SV27 Bluetooth Basic LE Tx measurements Opt. CON SignalVu-PC live link to the MDO4000B series Opt. SVP Advanced signal analysis (including pulse measurements) Opt. SVM General purpose digital modulation analysis Opt. SVT Settling time, frequency, and phase Opt. SVO Flexible OFDM with support for 802.11a/j/g and 802.16-2044 (fixed WiMAX) modulation types Opt. SVA AM/FM/PM modulation and audio measurements Opt. MAP Mapping and signal strength SHIP Activation keys, software CD, and instructions shipped in hard copy (activation keys are also e-mailed) NO SHIP Software and support materials are downloaded from Tektronix.com and activation keys are e-mailed Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. ASEAN / Australasia (65) 6356 3900 Belgium 00800 2255 4835* Central East Europe and the Baltics +41 52 675 3777 Finland +41 52 675 3777 Hong Kong 400 820 5835 Japan 81 (3) 6714 3010 Middle East, Asia, and North Africa +41 52 675 3777 People's Republic of China 400 820 5835 Republic of Korea 001 800 8255 2835 Spain 00800 2255 4835* Taiwan 886 (2) 2656 6688 Austria 00800 2255 4835* Brazil +55 (11) 3759 7627 Central Europe & Greece +41 52 675 3777 France 00800 2255 4835* India 000 800 650 1835 Luxembourg +41 52 675 3777 The Netherlands 00800 2255 4835* Poland +41 52 675 3777 Russia & CIS +7 (495) 6647564 Sweden 00800 2255 4835* United Kingdom & Ireland 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Canada 1 800 833 9200 Denmark +45 80 88 1401 Germany 00800 2255 4835* Italy 00800 2255 4835* Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Norway 800 16098 Portugal 80 08 12370 South Africa +41 52 675 3777 Switzerland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com. Copyright (c) Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 10 Feb 2015 www.tektronix.com 37W-27973-4