FEATURES
*Low Collector-Emitter Saturation Voltage
*Fast Switching Speeds
*Complementary Pairs Simplifies Designs
VCE(sat) = 1.0 V (max.) @8.0A
* ...for general purpose power amplification and switching
such as output or driver stages in applications such as
switching regulators, converter and power ampifiers.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25OC ambient temperature unless otherwise specified.
10 AMPERES COMPLEMENTARY
SILICON POWER TRANSISTORS 60,80 VOLTS
VD 2007-11
MAXIMUM RATINGES ( @ TA = 25oC unless otherwise noted )
RATINGS
Collector-Emitter voltage
Emitter-Base voltage
Collector current-Continutious
-Peak (Note 1)
Collector Power dissipation @TC=25OC
@TA=25OC
SYMBOL
RqJA
TJ, Tstg
Pd
VCEO
VEB
D44H or D45H UNITS
75
60
8 10, 11
80
A
V
V5
Operating and Storage Junction Temperature Range
Notes: 1. Pulse Width < 6.0mS, Duty Cycle < 50%
2. "Fully RoHS Compliant", "100% Sn Plating (Pb-free)".
Thermal Resistance
IC
W
10
20
5.0
1.67
-55 to +150
oC/W
RqJC 2.5
oC
TL
Lead Temperature for Soldering Purposes:
1/8" from case for 5 sec. 260 oC
TO-220AB
Dimensions in inches and (millimeters)
.147 (3.73)
.405 (10.28)
.120 (3.04)
.100 (2.54)
.155 (3.93)
.110 (2.80)
1 2 3
1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
4
.060 (1.52)
.045 (1.15)
.380 (9.66) .160 (4.07)
.055 (1.39)
.045 (1.15)
.620 (15.75)
.562 (14.27)
.210 (5.33)
.190 (4.83)
.570 (14.48)
.255 (6.47)
.235 (5.97)
.050 (1.27)
.000 (0.00)
.110 (2.79)
.080 (2.04)
.500 (12.70)
.045 (1.15)
min.
.025 (0.64)
.018 (0.46)
.190 (4.82)
.142 (3.61)
.035 (0.88)
.025 (0.64)
.105 (2.66)
.095 (2.42)
NPN
D44H SERIES
PNP
D45H SERIES
VD 2007-11
ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted )
Collector-emitter saturation voltage (IC= 8.0Adc,IB= 0.4Adc)
(IC= 8.0Adc,IB= 0.8Adc)
DC current gain (VCE= 1.0V,IC= 2.0Adc)
D44H10,D45H10
D44H8,11 D45H8,11
DC current gain (VCE= 1.0V,IC= 4.0Adc)
CHARACTERISTICS SYMBOL UNITS
100
-
uA
uA
Emitter cutoff current (VEB= 5Vdc)
Collector cutoff current (VCE= Rated VCEO,VBE= 0)
IEBO
hFE
VCE(sat)
ICES
MAX
-
35
60
MIN
- 10
- 1.0
-
-
-
V
Base-emitter saturation voltage (IC= 8.0Adc,IB= 0.8Adc) VBE(sat)
- 1.5
V
D44H10,D45H10
D44H8,11 D45H8,11
D44H/D45H8,11
D44H/D45H10
-
hFE
20
40
-
-
-
-
TYP
-
-
- 1.0
V
-
Collector Capacitance (VCB= 10V, ftest= 1.0 MHz) pF
Ccb
- -130
pF- -230
-
-
-
-
-
D44H Series
D45H Series
Gain Bandwidth Product (IC= 0.5Adc, VCE= 10Vdc, f=20 MHz) MHz
fT
- -50
MHz- -40
D44H Series
D45H Series
Delay and Rise Times (IC= 5.0Adc, IB1= 0.5Adc) nS
td + tr
- -300
nS- -135
D44H Series
D45H Series
Storage Time (IC= 5.0Adc, IB1=IB2= 0.5Adc) nS
ts
- -500
nS- -500
D44H Series
D45H Series
Fall Time (IC= 5.0Adc, IB1=IB2= 0.5Adc) nS
tf
- -140
nS- -100
D44H Series
D45H Series
RATING AND CHARACTERISTICS CURVES (D44H and D45H Series)
Figure Maximum Rated Forward Bias
Safe Operating Area
V
CE,
COLLECTOR-EMITTER VOLTAGE, (V)
1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100
I
C,
COLLECTOR CURRENT, (A)
0.2
0.5
1.0
2.0
5.0
10
20
50
200
100
100uS
10uS
1mS
1.0uS
T
J
=150
O
C
DC
D44H/45H8
T
C
< 70OC
DUTY CYCLE < 50%
D44H/45H10,11
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
