AMSC N/A FSC 5935
INCH-POUND
MIL-DTL-24308/2T
w/AMENDMENT 1
28 June 2012
SUPERSEDING
MIL-DTL-24308/2T
2 March 2009
DETAIL SPECIFICATION SHEET
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE,
POLARIZED SHELL, RACK AND PANEL, RECEPTACLE, SOCKET CONTACTS,
GENERAL PURPOSE, CLASS D AND G, CRIMP TYPE
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24308.
FIGURE 1. Shell, receptacle, crimp type.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
2
Detail
Shell
Dimensions
(See note10)
size
A
B
C
D
E
F
G
H
J
K
L
1
1.228
(31.19)
1.198
(30.43)
.648
(16.46)
.638
(16.21)
.989
(25.12)
.979
(24.87)
.316
( 8.03)
.302
( 7.67)
.509
(12.93)
.479
(12.17)
.439
(11.15)
.419
(10.64)
.248
(6.30)
.238
(6.05)
.769
(19.53)
.749
(19.02)
.432
(10.97)
.412
(10.46)
.060
(1.52)
.035
(.89)
.040
(1.02)
.020
(.51)
2
1.556
(39.52)
1.526
(38.76)
.976
(24.79)
.966
(24.54)
1.317
(33.45)
1.307
(33.20)
.316
( 8.03)
.302
( 7.67)
.509
(12.93)
.479
(12.17)
.439
(11.15)
.419
(10.64)
.248
(6.30)
.238
(6.05)
1.093
(27.76)
1.073
(27.25)
.432
(10.97)
.412
(10.46)
.060
(1.52)
.035
(.89)
.040
(1.02)
.020
(.51)
A
3
2.103
(53.42)
2.073
(52.65)
1.516
(38.51)
1.506
(38.25)
1.857
(47.17)
1.847
(46.91)
.316
( 8.03)
.302
( 7.67)
.509
(12.93)
.479
(12.17)
.439
(11.15)
.419
(10.64)
.248
(6.30)
.238
(6.05)
1.635
(41.53)
1.615
(41.02)
.432
(10.97)
.412
(10.46)
.060
(1.52)
.035
(.89)
.049
(1.25)
.029
(.74)
4
2.744
(69.70)
2.714
(68.94)
2.164
(54.97)
2.154
(54.71)
2.505
(63.63)
2.495
(63.37)
.316
( 8.03)
.302
( 7.67)
.509
(12.93)
.479
(12.17)
.439
(11.15)
.419
(10.64)
.248
(6.30)
.238
(6.05)
2.282
(57.96)
2.262
(57.45)
.432
(10.97)
.412
(10.46)
.060
(1.52)
.035
(.89)
.049
(1.25)
.029
(.74)
5
2.650
(67.31)
2.620
(66.55)
2.069
(52.55)
2.059
(52.30)
2.411
(61.24)
2.401
(60.99)
.428
(10.87)
.418
(10.62)
.620
(15.75)
.590
(14.99)
.439
(11.15)
.419
(10.64)
.248
(6.30)
.238
(6.05)
2.188
(55.58)
2.168
(55.07)
.544
(13.82)
.524
(13.31)
.060
(1.52)
.035
(.89)
.049
(1.25)
.029
(.74)
6
2.744
(69.70)
2.714
(68.94)
2.194
(55.73)
2.184
(55.47)
2.505
(63.63)
2.495
(63.37)
.490
(12.45)
.480
(12.19)
.683
(17.35)
.653
(16.59)
.439
(11.15)
.419
(10.64)
.248
(6.30)
.238
(6.05)
2.312
(58.72)
2.292
(58.22)
.606
(15.39)
.586
(14.88)
.060
(1.52)
.035
(.89)
.049
(1.25)
.029
(.74)
1
Same as detail A, shell size 1 except in accordance with detail B.
2
Same as detail A, shell size 2 except in accordance with detail B.
B
3
Same as detail A, shell size 3 except in accordance with detail B.
(See note 11)
4
Same as detail A, shell size 4 except in accordance with detail B.
5
Same as detail A, shell size 5 except in accordance with detail B.
6
Same as detai l A, shell size 6 except in accordance with det ail B.
1
Same as detail A, shell size 1 except in accordance with detail C.
2
Same as detail A, shell size 2 except in accordance with detail C.
C
3
Same as detail A, shell size 3 except in accordance with detail C.
(See note 11)
4
Same as detail A, shell size 4 except in accordance with detail C.
5
Same as detail A, shell size 5 except in accordance with detail C.
6
Same as detail A, shell size 6 except in accordance with detail C.
1
Same as detai l A, shell size 1 except in accordance with det ail D.
2
Same as detail A, shell size 2 except in accordance with detail D.
D
3
Same as detail A, shell size 3 except in accordance with detail D.
4
Same as detail A, shell size 4 except in accordance with detail D.
5
Same as detail A, shell size 5 except in accordance with detail D.
6
Same as detail A, shell size 6 except in accordance with detail D.
FIGURE 1. Shell, receptacle, crimp type - Continued.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
3
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only .
3. Insulator may project .375 (9.53) maximum.
4. Wire insulation .072 (1.83) maximum for arrangements, (see MIL-DTL-24308, Append ix A), A-1-1,
A-2-1, A-3-1, A-4-1,and A-5-1. Wire insulation .054 (1.37) maximum for arrangements,
(see MIL-DTL-243 08, App e ndix A) ,A-1-2, A-2-2, A-3-2, A-4-2, A-5-2, and A-6-1.
5. To accommodate a .040 (1.02) diameter pin for arrangements, (see MIL-DTL-24308, Appendix A),
A-1-1, A-2-1, A-3-1, A-4-1, and A-5-1. To accommodate a .030 (.76) diameter pin for
arrangements, (see MIL-DTL-24308, Appendix A),A-1-2, A-2-2, A-3-2, A-4-2, A-5-2, and A-6-1.
6. Use .041/.039 (1.04/.99) diameter pin for arrangements, (see MIL-DTL-24308, Appendix A),A-1.1, A-
2.1, A-3.1, A-4.1,a nd A-5.1. Use .0305/.0295 (.77/.75) diameter pin for arrangements,
(see MIL-DTL-243 08, App e ndix A) , A-1-2, A-2-2, A-3-2, A-4-2, A-5-2, and A-6-1.
7. Patent notice. The government has a royalty free license under the U.S. Patents listed below for the
benefit of manufacturers of the items disclosed and described herein, either for the government of
for use in equipment delivered to the government.
2790153 expires April 23, 1974
3110093 expires November 12, 1980
3158424 expires November 24, 1981
8. Copyright notice. All information disclosed in this military specification sheet which is or may be
copyrighted by ITT Cannon Electric is reproduced herein with the express permission of the
copyright o wner .
9. Indentation on the ends of the termination side of the shell, for the purpose of securing the insulator
in the shell, is permitted. This may result in the “F” dimension being undersized in these areas.
However the “F” dimension shall be maintained for the remainder of the connector.
10. See table II for supersession data.
11. Details B and C are inactive for new design, use detail D.
FIGURE 1. Shell, receptacle, crimp type - Continued.
Inches
mm
.004
.10
.005
.13
.008
.20
.010
.25
.031
.79
.040
1.02
.041
1.04
.062
1.57
.070
1.78
.086
2.18
.092
2.34
.097
2.46
.103
2.62
.115
2.92
.120
3.05
.125
3.18
.129
3.28
.143
3.63
.375
9.53
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
4
REQUIREMENTS:
The connectors shall conform to figure 1 and the specification Part or Identifying Numbers (PIN)
indicated in table I.
TABLE I. Design standards. 1/
(PIN)
Class G
PIN
Class D
Shell
size
Shell
detail
(see figure1)
Insert
arrangement
reference
number
6/
Contact
PIN
PIN
mark ed on
connector
class G
PIN
mark ed on
connector
class D
M24308/2-1
M24308/2-516
1
A
A-1-1
M39029/63-368
M24308/2-1
M24308/2-516
M24308/2-2
M24308/2-517
2
A
A-2-1
M39029/63-368
M24308/2-2
M24308/2-517
M24308/2-3
M24308/2-518
3
A
A-3-1
M39029/63-368
M24308/2-3
M24308/2-518
M24308/2-4
M24308/2-519
4
A
A-4-1
M39029/63-368
M24308/2-4
M24308/2-519
M24308/2-5
M24308/2-520
5
A
A-5-1
M39029/63-368
M24308/2-5
M24308/2-520
M24308/2-6
M24308/2-521
Connec tor kit: M24308/2-1 connector with applicable tool
2/
M24308/2-1
M24308/2-516
M24308/2-7
M24308/2-522
Connec tor kit: M24308/2-2 connector with applicable tool
2/
M24308/2-2
M24308/2-517
M24308/2-8
M24308/2-523
Connec tor kit: M24308/2-3 connector with applicable tool
2/
M24308/2-3
M24308/2-518
M24308/2-9
M24308/2-524
Connec tor kit: M24308/2-4 connector with applicable tool
2/
M24308/2-4
M24308/2-519
M24308/2-10
M24308/2-525
Connec tor kit: M24308/2-5 connector with applicable tool
2/
M24308/2-5
M24308/2-520
M24308/2-11
M24308/2-526
1
A
A-1-2
M39029/57-354
M24308/2-11
M24308/2-526
M24308/2-12
M24308/2-527
2
A
A-2-2
M39029/57-354
M24308/2-12
M24308/2-527
M24308/2-13
M24308/2-528
3
A
A-3-2
M39029/57-354
M24308/2-13
M24308/2-528
M24308/2-14
M24308/2-529
4
A
A-4-2
M39029/57-354
M24308/2-14
M24308/2-529
M24308/2-15
M24308/2-530
5
A
A-5-2
M39029/57-354
M24308/2-15
M24308/2-530
M24308/2-16
M24308/2-531
6
A
A-6-1
M39029/57-354
M24308/2-16
M24308/2-531
M24308/2-17
M24308/2-532
Connec tor kit: M24308/2-11 connector with applicable tool
3/
M24308/2-11
M24308/2-526
M24308/2-18
M24308/2-533
Connec tor kit: M24308/2-12 connector with applicable tool
3/
M24308/2-12
M24308/2-527
M24308/2-19
M24308/2-534
Connec tor kit: M24308/2-13 connector with applicable tool
3/
M24308/2-13
M24308/2-528
M24308/2-20
M24308/2-535
Connec tor kit: M24308/2-14 connector with applicable tool
3/
M24308/2-14
M24308/2-529
M24308/2-21
M24308/2-536
Connec tor kit: M24308/2-15 connector with applicable tool
3/
M24308/2-15
M24308/2-530
M24308/2-22
M24308/2-537
Connec tor kit: M24308/2-16 connector with applicable tool
3/
M24308/2-16
M24308/2-531
See footnotes at end of table.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
5
TABLE I. Design standards - Continued. 1/
PIN
class G
PIN
class D
Shell
size
Shell
detail
(see figure 1)
Insert
arrangement
reference
number
6/
Contact
PIN
PIN
mark ed on
connector
class G
PIN
mark ed on
connector
class D
4/
M24308/2-23
4/
M24308/2-538
1
B
A-1-1
M39029/63-368
M24308/2-23
M24308/2-538
M24308/2-24
M24308/2-539
2
B
A-2-1
M39029/63-368
M24308/2-24
M24308/2-539
M24308/2-25
M24308/2-540
3
B
A-3-1
M39029/63-368
M24308/2-25
M24308/2-540
M24308/2-26
M24308/2-541
4
B
A-4-1
M39029/63-368
M24308/2-26
M24308/2-541
M24308/2-27
M24308/2-542
5
B
A-5-1
M39029/63-368
M24308/2-27
M24308/2-542
M24308/2-28
M24308/2-543
1
B
A-1-2
M39029/57-354
M24308/2-28
M24308/2-543
M24308/2-29
M24308/2-544
2
B
A-2-2
M39029/57-354
M24308/2-29
M24308/2-544
M24308/2-30
M24308/2-545
3
B
A-3-2
M39029/57-354
M24308/2-30
M24308/2-545
M24308/2-31
M24308/2-546
4
B
A-4-2
M39029/57-354
M24308/2-31
M24308/2-546
M24308/2-32
M24308/2-547
5
B
A-5-2
M39029/57-354
M24308/2-32
M24308/2-547
M24308/2-33
M24308/2-548
6
B
A-6-1
M39029/57-354
M24308/2-33
M24308/2-548
4/
M24308/2-34
M24308/2-549
Connec tor kit: M24308/2-23 connector with applicable tool
2/
M24308/2-23
M24308/2-549
M24308/2-35
M24308/2-550
Connec tor kit: M24308/2-24 connector with applicable tool
2/
M24308/2-24
M24308/2-550
M24308/2-36
M24308/2-551
Connec tor kit: M24308/2-25 connector with applicable tool
2/
M24308/2-25
M24308/2-551
M24308/2-37
M24308/2-552
Connec tor kit: M24308/2-26 connector with applicable tool
2/
M24308/2-26
M24308/2-552
M24308/2-38
M24308/2-553
Connec tor kit: M24308/2-27 connector wi th applicable tool
2/
M24308/2-27
M24308/2-553
M24308/2-39
M24308/2-554
Connec tor kit: M24308/2-28 connector with applicable tool
2/
M24308/2-28
M24308/2-554
M24308/2-40
M24308/2-555
Connec tor kit: M24308/2-29 connector with applicable tool
2/
M24308/2-29
M24308/2-555
M24308/2-41
M24308/2-556
Connec tor kit: M24308/2-30 connector with applicable tool
2/
M24308/2-30
M24308/2-556
M24308/2-42
M24308/2-557
Connec tor kit: M24308/2-31 connector with applicable tool
2/
M24308/2-31
M24308/2-557
M24308/2-43
M24308/2-558
Connec tor kit: M24308/2-32 connector with applicable tool
2/
M24308/2-32
M24308/2-558
M24308/2-44
M24308/2-559
Connec tor kit: M24308/2-33 connector with applicable tool
2/
M24308/2-33
M24308/2-559
See footnotes at end of table.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
6
TABLE I. Design standards - Continued. 1/
PIN
class G
PIN
class D
Shell
size
Shell
detail
(see figure 1)
Insert
arrangement
reference
number
6/
Contact PIN
PIN
mark ed on
connector
class G
PIN
mark ed on
connector
class D
M24308/2-281
M24308/2-560
1
A
A-1-1
Contacts not
included
M24308/2-1
M24308/2-516
M24308/2-282
M24308/2-561
2
A
A-2-1
"
M24308/2-2
M24308/2-517
M24308/2-283
M24308/2-562
3
A
A-3-1
"
M24308/2-3
M24308/2-518
M24308/2-284
M24308/2-563
4
A
A-4-1
"
M24308/2-4
M24308/2-519
M24308/2-285
M24308/2-564
5
A
A-5-1
"
M24308/2-5
M24308/2-520
M24308/2-286
M24308/2-565
1
A
A-1-2
"
M24308/2-11
M24308/2-526
M24308/2-287
M24308/2-566
2
A
A-2-2
"
M24308/2-12
M24308/2-527
M24308/2-288
M24308/2-567
3
A
A-3-2
"
M24308/2-13
M24308/2-528
M24308/2-289
M24308/2-568
4
A
A-4-2
"
M24308/2-14
M24308/2-529
M24308/2-290
M24308/2-569
5
A
A-5-2
"
M24308/2-15
M24308/2-530
M24308/2-291
M24308/2-570
6
A
A-6-1
"
M24308/2-16
M24308/2-531
4/
M24308/2-292
4/
M24308/2-571
1
B
A-1-1
“
M24308/2-23
M24308/2-538
M24308/2-293
M24308/2-572
2
B
A-2-1
"
M24308/2-24
M24308/2-539
M24308/2-294
M24308/2-573
3
B
A-3-1
"
M24308/2-25
M24308/2-540
M24308/2-295
M24308/2-574
4
B
A-4-1
"
M24308/2-26
M24308/2-541
M24308/2-296
M24308/2-575
5
B
A-5-1
"
M24308/2-27
M24308/2-542
M24308/2-297
M24308/2-576
1
B
A-1-2
"
M24308/2-28
M24308/2-543
M24308/2-298
M24308/2-577
2
B
A-2-2
"
M24308/2-29
M24308/2-544
M24308/2-299
M24308/2-578
3
B
A-3-2
"
M24308/2-30
M24308/2-545
M24308/2-300
M24308/2-579
4
B
A-4-2
"
M24308/2-31
M24308/2-546
M24308/2-301
M24308/2-580
5
B
A-5-2
"
M24308/2-32
M24308/2-547
M24308/2-302
M24308/2-581
6
B
A-6-1
"
M24308/2-33
M24308/2-548
4/
M24308/2-335
M24308/2-582
3
C
A-3-1
M39029/63-368
M24308/2-335
M24308/2-582
M24308/2-336
M24308/2-583
4
C
A-4-1
M39029/63-368
M24308/2-336
M24308/2-583
M24308/2-341
M24308/2-584
2
C
A-2-1
M39029/63-368
M24308/2-341
M24308/2-584
M24308/2-342
M24308/2-585
1
D
A-1-1
M39029/63-368
M24308/2-342
M24308/2-585
M24308/2-343
M24308/2-586
2
D
A-2-1
M39029/63-368
M24308/2-343
M24308/2-586
M24308/2-344
M24308/2-587
3
D
A-3-1
M39029/63-368
M24308/2-344
M24308/2-587
M24308/2-345
M24308/2-588
4
D
A-4-1
M39029/63-368
M24308/2-345
M24308/2-588
M24308/2-346
M24308/2-589
5
D
A-5-1
M39029/63-368
M24308/2-346
M24308/2-589
M24308/2-347
M24308/2-590
1
D
A-1-2
M39029/57-354
M24308/2-347
M24308/2-590
M24308/2-348
M24308/2-591
2
D
A-2-2
M39029/57-354
M24308/2-348
M24308/2-591
M24308/2-349
M24308/2-592
3
D
A-3-2
M39029/57-354
M24308/2-349
M24308/2-592
M24308/2-350
M24308/2-593
4
D
A-4-2
M39029/57-354
M24308/2-350
M24308/2-593
M24308/2-351
M24308/2-594
5
D
A-5-2
M39029/57-354
M24308/2-351
M24308/2-594
M24308/2-352
M24308/2-595
6
D
A-6-1
M39029/57-354
M24308/2-352
M24308/2-595
See footnotes at end of table.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
7
TABLE I. Design standards - Continued. 1/
PIN
class G
PIN
class D
Shell
size
Shell
detail
(see figure 1)
Insert
arrangement
reference
number
6/
Contact PIN
PIN
mark ed on
connector
class G
PIN
mark ed on
connector
class D
M24308/2-353
M24308/2-596
Connec tor kit: M24308/2-342 connector w ith applicable
tool 2/
M24308/2-342
M24308/2-585
M24308/2-354
M24308/2-597
Connector kit: M24308/2-343 connector w ith applicable
tool 2/
M24308/2-343
M24308/2-586
M24308/2-355
M24308/2-598
Connec tor kit: M24308/2-344 connector w ith applicable
tool 2/
M24308/2-344
M24308/2-587
M24308/2-356
M24308/2-599
Connec tor kit: M24308/2-345 connector w ith applicable
tool 2/
M24308/2-345
M24308/2-588
M24308/2-357
M24308/2-600
Connec tor kit: M24308/2-346 connector w ith applicable
tool 2/
M24308/2-346
M24308/2-589
M24308/2-358
M24308/2-601
Connector kit: M24308/2-347 connector w ith applicable
tool 2/
M24308/2-347
M24308/2-590
M24308/2-359
M24308/2-602
Connec tor kit: M24308/2-348 connector w ith applicable
tool 2/
M24308/2-348
M24308/2-591
M24308/2-360
M24308/2-603
Connec tor kit: M24308/2-349 connector w ith applicable
tool 2/
M24308/2-349
M24308/2-592
M24308/2-361
M24308/2-604
Connec tor kit: M24308/2-350 connector w ith applicable
tool 2/
M24308/2-350
M24308/2-593
M24308/2-362
M24308/2-605
Connec tor kit: M24308/2-351 connector w ith applicable
tool 2/
M24308/2-351
M24308/2-594
M24308/2-363
M24308/2-606
Connec tor kit: M24308/2-352 connector w ith applicable
tool 2/
M24308/2-352
M24308/2-595
M24308/2-482
M24308/2-607
1
D
A-1-1
Contacts not
included
M24308/2-342
M24308/2-585
M24308/2-483
M24308/2-608
2
D
A-2-1
"
M24308/2-343
M24308/2-586
M24308/2-484
M24308/2-609
3
D
A-3-1
"
M24308/2-344
M24308/2-587
M24308/2-485
M24308/2-610
4
D
A-4-1
"
M24308/2-345
M24308/2-588
M24308/2-486
M24308/2-611
5
D
A-5-1
"
M24308/2-346
M24308/2-589
M24308/2-487
M24308/2-612
1
D
A-1-2
"
M24308/2-347
M24308/2-590
M24308/2-488
M24308/2-613
2
D
A-2-2
"
M24308/2-348
M24308/2-591
M24308/2-489
M24308/2-614
3
D
A-3-2
"
M24308/2-349
M24308/2-592
M24308/2-490
M24308/2-615
4
D
A-4-2
"
M24308/2-350
M24308/2-593
M24308/2-491
M24308/2-616
5
D
A-5-2
"
M24308/2-351
M24308/2-594
M24308/2-492
M24308/2-617
6
D
A-6-1
"
M24308/2-352
M24308/2-595
5/
M24308/2-509
5/
M24308/2-621
3
D
A-3-1
M39029/63-368
M24308/2-621
M24308/2-510
M24308/2-622
4
D
A-4-1
M39029/63-368
M24308/2-622
M24308/2-515
M24308/2-627
2
D
A-2-1
M39029/63-368
M24308/2-627
1/ These connectors mate with connectors specified in MIL-DTL- 24308 /3, MIL-DTL-24308/4, MIL-DTL-
24308/9, and MIL-DTL-24308/24.
2/ Installation and removal tool: M81969/39-01 with plastic tips or M81969/1-02 with metal tips. For size
20 contacts, either tool shall be supplied with each individual connector.
3/ Installation and removal tool: M81969/14-01 with plastic tips or M81969/1-04 with metal tips. For size
22 contacts, either tool shall be supplied with each individual connector.
4/ PINs M24308/2-23 through M24308/2-44, M24308/2-538 through M24308/2-5 59 and M24 308 /2-292
through M24308/2-292 through M24 308/2-341, M24308/2-571 through M24308/2-584 are inactive for
new design. Use M24308/2-342 through M24308/2-352, and M24308/2-585 through M24308/2-595.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
8
TABLE I. Design standards - Continued. 1/
5/ PINs M24308/2-509, M24308/2-510, M24308 /2-51 5, M243 08/2-621, M24308/2-622, and M24308/2-
627are inactive for new design. Use M24308/2-344, M24308/2-345, M2430 8/2-343, M24308/2-587,
M24308/2-588, and M24308/2-586, respectively.
6/ For insert arrangements see MIL-DTL-24308, Appendix A.
Supersession data: See table II.
TABLE II. Shell supersession data.
Shell detai l
(see figure 1)
Superseded MS sheet
Deta il A
MS18270-1 through -6
Deta il B
MS18270-7 through -12
Detail C
MS18270-13 thr ou gh -18
Detail D
MS18270-19 thr ou gh -24
PIN: Consists of the letter M, the basic number of the specification sheet, and a dash number compiled
from the code.
PIN example: M24308/2 -361 F
Specification sheet number
Data sheet number from table I
Finish: For class G:
A = Pure electrodeposited aluminum
F = Cadmium
K = Zinc nickel
T = Nickel Fluorocarbon Polymer
Z = Zinc
For class D:
Class D connectors have a nickel finish, no suffix is required.
Amendment notations. The margins of this specification are marked with vertical lines to indicate
where modifications from this amendment were made. This was done as a convenience only and
the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders
and contractors are cautioned to evaluate the requirements of this document based on the entire
content irrespective of the marginal notations.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
MIL-DTL-24308/2T
w/AMENDMENT 1
9
Referenced documents. In addition to MIL-DTL-24308, this document references the following:
MIL-DTL-24308/3
MIL-DTL-24308/4
MIL-DTL-24308/9
MIL-DTL-24308/24
CONCLUDING MATERIAL
Custodians: Preparing activity:
Army - CR DLA - CC
Navy - EC
Air Force – 85 (Project: 5935-2011-125)
NASA - NA
DLA - CC
Revie w ac tivities :
Army - AT, AV, CR4, MI
Navy - AS, CG, MC, SH
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above
using the ASSIST Online database at https://assist.dla.mil.
Source: http://assist.dla.mil -- Downloaded: 2020-07-17T03:12ZCheck the source to verify that this is the current version before use.
