Loose A50 Taped MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS Typical applications: blocking, coupling, decoupling, bypassing, interference suppression in low voltage applications (i.e.:AUTOMOTIVE). PRODUCT CODE: A50 D max <7 7<16 16 Od 0.05 0.6 0.8 1 All dimensions are in mm. GENERAL TECHNICAL DAta Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under 1 2 3 4 5 6 7 8 9 10 11 12 13 14 vacuum. Winding: non-inductive type. A 5 0 Leads: tinned wire. Protection: polyester tape wrapping and thermosetting resin Digit 1 to 3 Series code. end fill. Digit 4 d.c. rated voltage: Marking: Manufacturer's logo, series (1.50), dielectric C = 50V D = 63VE= 100V I = 250V code (MKT), capacitance, tolerance, D.C. rated M =400V P = 630V Q =1000V voltage. Climatic category: 55/105/56 IEC 60068-1 Digit 5 Length (mm): Operating temperature range: -55 to +105C F=11; H=14; K=20.5; Q=28; T=33 Digits 7 - 8 - 9 indicate the first three digits of Related documents: IEC 60384-2 Digit 6 to 9 Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table1) Digit 12 Identifies the dimensions and electrical characteristics. Internal use Digit 13 Winding scheme Digit 14 Capacitance tolerance: J=5%; K=10%; M=20%. Product code system The part number, comprising 14 digits, is formed as follows: Table 1 (for more detailed information, please refer to page 14). Standard packaging style Ordering code Reel O 355 mm 26 Loose AA Rated Cap. single sided metallized polyester film (Digit 10 to 11) 50Vdc/30Vac 0.47 F Dmax 5.0 Lmax 11.0 Max dv/dt (V/s) 4.0 Max K0 0.68 F 5.0 11.0 4.0 0.40 E3 1.0 F 6.5 11.0 4.0 0.40 E3 1.5 F 7.0 14.0 4.0 0.40 E3 2.2 F 8.0 14.0 4.0 0.40 E3 3.3 F 7.5 20.5 2.0 0.20 E3 4.7 F 8.5 20.5 2.0 0.20 E3 6.8 F 10.0 20.5 2.0 0.20 E3 10.0 F 12.0 20.5 2.0 0.20 E3 (V2/s) 0.40 E3 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) Rated Cap. 0.33 F Dmax 5.0 Lmax 11.0 Max dv/dt (V/s) 4.0 A50CF 3680--0-- 0.47 F 6.0 14.0 4.0 0.50 E3 A50CF 4100--0-- 0.68 F 6.0 14.0 4.0 0.50 E3 A50CH 4150--0-- 1.0 F 7.0 14.0 4.0 0.50 E3 A50CH 4220--0-- 1.5 F 6.5 20.5 2.0 0.25 E3 A50CK 4330--0-- 2.2 F 8.0 20.5 2.0 0.25 E3 A50CK 4470--0-- 3.3 F 9.5 20.5 2.0 0.25 E3 A50CK 4680--0-- 4.7 F 9.5 28.0 1.5 0.19 E3 A50CK 5100--0-- 6.8 F 11.0 28.0 1.5 0.19 E3 10.0 F 11.5 33.0 1.0 0.13 E3 Part Number A50CF 3470--0-- 63Vdc/40Vac Max K0 Part Number (V2/s) 0.50 E3 A50DF 3330--6-A50DH 3470--6-A50DH 3680--6-A50DH 4100--6-A50DK 4150--6-A50DK 4220--6-A50DK 4330--6-A50DQ 4470--6-A50DQ 4680--6-A50DT 5100--6-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. 21 09/2008 A50 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: A50 Rated Cap. 0.10 F 0.15 F 0.22 F 0.33 F 0.47 F 0.68 F 1.0 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10.0 F Rated Cap. 100Vdc/63Vac Dmax 5.0 5.0 5.0 6.0 6.0 7.0 7.0 8.0 9.5 9.5 10.0 12.0 14.5 Lmax 11.0 11.0 11.0 14.0 14.0 14.0 20.5 20.5 20.5 28.0 33.0 33.0 33.0 250Vdc/160Vac Max dv/dt (V/s) 5.0 5.0 5.0 5.0 5.0 5.0 3.0 3.0 3.0 2.0 1.0 1.0 1.0 Max K0 Max K0 (V2/s) 5.0 E3 A50IF (V2/s) 1.0 E3 1.0 E3 1.0 E3 1.0 E3 1.0 E3 1.0 E3 0.6 E3 0.6 E3 0.6 E3 0.4 E3 0.3 E3 0.3 E3 0.3 E3 A50EF A50EF A50EF A50EH A50EH A50EH A50EK A50EK A50EK A50EQ A50ET A50ET A50ET 0.047 F Dmax 5.0 Lmax 11.0 Max dv/dt (V/s) 10.0 0.068 F 5.0 11.0 10.0 5.0 E3 A50IF 0.10 F 5.5 14.0 10.0 5.0 E3 A50IH 0.15 F 5.5 14.0 10.0 5.0 E3 A50IH 0.22 F 6.5 14.0 10.0 5.0 E3 A50IH 0.33 F 6.0 20.5 7.0 3.5 E3 A50IK 0.47 F 7.0 20.5 7.0 3.5 E3 A50IK 0.68 F 8.5 20.5 7.0 3.5 E3 A50IK 1000 pF Dmax 5.0 Lmax 11.0 Max dv/dt (Vs) 20 1500 pF 5.0 11.0 20 .25.0 E3 2200 pF 5.0 11.0 20 .25.0 E3 3300 pF 5.0 11.0 20 .25.0 E3 4700 pF 5.0 11.0 20 .25.0 E3 6800 pF 5.0 11.0 20 .25.0 E3 0.010 F 5.0 14.0 20 .25.0 E3 0.015 F 5.0 14.0 20 .25.0 E3 0.022 F 6.0 14.0 20 .25.0 E3 0.033 F 6.0 20.5 15 .19.0 E3 0.047 F 6.0 20.5 15 .19.0 E3 0.068 F 7.0 20.5 15 .19.0 E3 0.10 F 7.0 28.0 10 .13.0 E3 0.15 F 8.5 28.0 10 .13.0 E3 2470--6-- 0.22 F 10.0 28.0 10 .13.0 E3 2680--6-- 0.33 F 10.5 33.0 6 7.5 E3 3100--6-- 0.47 F 12.0 33.0 6 7.5 E3 3150--6-- 0.68 F 14.5 33.0 6 7.5 E3 3220--6-- 1.0 17.5 33.0 6 7.5 E3 A50PT 4100--6-- 3330--6-- Rated Cap. Max K0 Part Number (V2/s) 100 E3 A50QH 1100--0-- 3100--6-3150--6-3220--6-3330--6-3470--6-3680--6-4100--6-4150--6-4220--6-4330--6-4470--6-4680--6-5100--6-- Part Number Lmax 14.0 1500 pF 6.5 14.0 50 100 E3 4220--6-- 2200 pF 6.5 14.0 50 100 E3 4330--6-- 3300 pF 6.5 14.0 50 100 E3 4470--6-- 4700 pF 7.5 14.0 50 100 E3 4680--6-- 6800 pF 8.0 14.0 50 100 E3 5100--6-- 0.010 F 7.0 20.5 30 60 E3 0.015 F 7.5 20.5 30 60 E3 0.022 F 9.0 20.5 30 60 E3 0.033 F 8.0 28.0 15 30 E3 A50MF 2100--6-- 0.047 F 9.0 28.0 15 30 E3 A50MF 2150--6-- 0.068 F 10.5 28.0 15 30 E3 A50MF 2220--6-- 0.10 F 12.5 28.0 15 30 E3 A50MF 2330--6-- 0.15 F 13.5 33.0 10 20 E3 A50MH 2470--6-- 0.22 F 16.0 33.0 10 20 E3 A50MH 2680--6-- 0.33 F 19.0 33.0 10 20 E3 A50MH 3100--6-- 0.47 F 22.0 33.0 10 20 E3 A50IQ 4100--6-- 8.5 28.0 4.0 2.0 E3 F 10.0 28.0 4.0 2.0 E3 A50IQ 4150--6-- 2.2 F 11.0 33.0 2.5 1.3 E3 A50IT 3.3 F 13.0 33.0 2.5 1.3 E3 A50IT 4.7 F 15.5 33.0 2.5 1.3 E3 A50IT 6.8 F 18.5 33.0 2.5 1.3 E3 A50IT 10.0 F 22.0 33.0 2.5 1.3 E3 A50IT Max K0 (V2/s) 11.0 E3 0.010 F Dmax 5.0 Lmax 11.0 Max dv/dt (V/s) 13.5 0.015 F 5.0 11.0 13.5 11.0 E3 0.022 F 5.0 11.0 13.5 11.0 E3 0.033 F 5.0 11.0 13.5 11.0 E3 0.047 F 6.0 14.0 13.5 11.0 E3 0.068 F 6.0 14.0 13.5 11.0 E3 0.10 F 6.5 14.0 13.5 11.0 E3 0.15 F 6.0 20.5 10.0 8.0 E3 0.22 F 7.5 20.5 10.0 8.0 E3 0.33 F 8.5 20.5 10.0 8.0 E3 0.47 F 8.5 28.0 6.5 5.2 E3 0.68 F 10.0 28.0 6.5 5.2 E3 1.0 F 10.5 33.0 4.0 3.2 E3 1.5 F 12.5 33.0 4.0 3.2 E3 2.2 F 15.0 33.0 4.0 3.2 E3 3.3 F 18.5 33.0 4.0 3.2 E3 (V2s) .25.0 E3 Dmax 6.5 F Part Number A50MK 3150--6-A50MK 3220--6-A50MK 3330--6-- 1000Vdc/250Vac* Max K0 1000 pF 3680--6-- 1.5 400Vdc/200Vac F 630Vdc/220Vac* Max dv/dt (Vs) 50 3470--6-- 1.0 Rated Cap. Rated Cap. Part Number Part Number A50PF 1100--6-- A50PF 1150--6-- A50PF 1220--6-A50PF 1330--6-A50PF 1470--6-A50PF 1680--6-A50PH 2100--6-A50PH 2150--6-A50PH 2220--6-A50PK 2330--6-A50PK 2470--6-A50PK 2680--6-A50PQ 3100--6-A50PQ 3150--6-A50PQ 3220--6-A50PT 3330--6-A50PT 3470--6-A50PT 3680--6-- A50QH 1150--0-- A50QH 1220--0-A50QH 1330--0-A50QH 1470--0-A50QH 1680--0-A50QK 2100--0-A50QK 2150--0-A50QK 2220--0-A50QQ 2330--0-A50QQ 2470--0-A50QQ 2680--0-A50QQ 3100--0-A50QT 3150--0-A50QT 3220--0-A50QT 3330--0-A50QT 3470--0-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) A50MQ 3470--6-A50MQ 3680--6-A50MT 4100--6-A50MT 4150--6-A50MT 4220--6-A50MT 4330--6-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 09/2008 22 A50 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: A50 test method and performance electrical characteristics Rated voltage (VR): 50 Vdc 400 Vdc 63 Vdc 100 Vdc 630 Vdc 1000 Vdc Rated temperature (TR): +85 C 250 Vdc Temperature derated voltage: for temperatures between +85C and +105C a decreasing factor of 1.25% per degree C on the rated voltage VR (d.c. and a.c.) has to be applied. 1000pF to 10F Capacitance range: Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): 7nH max 1 nH per 1 mm lead and capacitor length. Dissipation factor (DF): tg 10-4 at +25C 5C kHz 1 10 100 C0.1F 80 150 250 0.1F<C 1F 80 150 C >1 F 100 Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: Performance Capacitance change |C/C|: DF change (tg): Insulation resistance: +40C2C 93% 2% 56 days 5% 50x10-4 at 1kHz 50% of initial limit. Endurance: Test conditions +85C 2C Temperature: Test duration: 2000 h Voltage applied: 1.25xVR Performance Capacitance change |C/C|: 5% DF change (tg): 30x10-4 at 10kHz for C 1F 20x10-4 at 1kHz for C> 1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions +260C5C Solder bath temperature: Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 2% DF change (tg): 30x10-4 at 10kHz for C 1F 20x10-4 at 1kHz for C> 1F Insulation resistance: initial limit. Insulation resistance: Test conditions Temperature: +25C5C Voltage charge time: 1 min Voltage charge: 50 Vdc for VR <100 Vdc 100 Vdc for VR 100 Vdc Performance Long term stability (after two years): For VR 100 Vdc Storage: standard environmental conditions (see page 12). 3750 M for C 0.33F (50000 M)* Performance 1000 s for C > 0.33F (5000 s)* Capacitance change |C/C|: 3% for C 0.1F For VR >100 Vdc 2% for C> 0.1F 30000 M for C 0.33F (50000 M)* Reliability: 10000 s for C > 0.33F (17000 s)* Reference MIL HDB 217 *Typical value Application conditions: Test voltage between terminations: Temperature: +40C2C 1.6xVR applied for 2 s at +25C5C. Voltage: 0.5xVR Failure rate: 5 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |C/C|: >10% >2 x initial limit. DF change (tg): Insulation resistance: <0.005 x initial limit. 23 09/2008 A50 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: A50 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 09/2008 24 A50 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: A50 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 25 09/2008