FEATURES
●Rating to 1000V PRV
●Ideal for printed circuit board
●Low forward voltage drop,high current capability
●Reliable low cost construction utilizing molded plastic
technique results in inexpensive product
●Lead tin Pb/Sn copper
●The plastic material has UL flammability
classification 94V-0
MECHANICAL DATA
●Polarit:As marked on Body
●Weight:0.02 ounces,0.38 grams
●Mounting position:Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load,derate current by 20%
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward
Rectified Current @TA=40℃
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
Maximum Forward Voltage at 1.5A DC VFV
Maximum DC Reverse Current @TJ=25℃
at Rated DC Blocking Voltage @TJ=125℃
I2t Rating for Fusing(t<8.3ms) I2t A2s
Typical Junction Capacitance Per Element(Note1) CJpF
Typical Thermal Resistance (Note2) RθJC ℃/W
Operating Temperature Range TJ ℃
Storage Temperature Range TSTG ℃
Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC
~ 229 ~
SURFACE MOUNT
GLASS PASSIVATED
BRIDEG RECTIFIERS
REVERSE VOLTAGE - 50 to 1000 Volts
. FORWARD CURRENT - 1.5 Amperes
uA
Dimensions in inches and (millimeters)
I(AV) 1.5 A
50IFSM
UNITSYMBOL
40
1.1
500
IR10
DF15005S thru DF1510S
with 0.5*0.5"(13*13mm)copper pads.
25
-55 to +150
10.4
-55 to +150
2.Thermal resistance from junction to ambient mounted on P.C.B
A
CHARACTERISTICS
DFS
.037(0.95)
.047(1.2)
.031(0.8)
.023(0.6) .256(6.5)
.244(6.2)
.307(7.8)
.335(8.5)
.315(8.0)
.323(8.2)
.391(10.0)
.406(10.3)
.055(1.4)
.063(1.6)
.197(5.0)
.205(5.2)
.102(2.6)
.089(2.2)
.140(0.35)
.008(0.2)