GBL005 thru GBL10
Vishay Semiconductors
formerly General Semiconductor
Document Number 88609 www.vishay.com
24-Aug-04 1
Glass Passivated Single-Phase
Bridge Rectifier Reverse Voltage 50 and 1000 V
Forward Current 4.0 A
0.125 (3.17)
x 45 degrees
Chamfer
0.080 (2.03)
0.060 (1.50)
0.095 (2.41)
0.080 (2.03)
0.825 (20.9)
0.815 (20.7)
0.050 (1.27)
0.040 (1.02)
Polarity shown on front side of case, positive lead beveled corner.
0.040 (1.02)
0.030 (0.76)
0.022 (0.56)
0.018 (0.46)
0.210
0.190
(5.3)
(4.8)
0.421 (10.7)
0.411 (10.4)
0.718 (18.2)
0.682 (17.3)
0.140 (3.56)
0.128 (3.25)
Lead Depth
0.098 (2.5)
0.075 (1.9)
0.098 (2.5)
0.075 (1.9)
0.026 (0.66)
0.020 (0.51)
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
GBL GBL GBL GBL GBL GBL GBL
Parameter Symbol 005 01 02 04 06 08 10 Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward TC=50°C 4.0(1)
rectified output current at TA=40°C IF(AV) 3.0(2) A
Peak forward surge current single
sine-wave superimposed on rated load IFSM 150 A
(JEDEC Method) TJ=150°C
Rating for fusing (t<8.3ms) I2t93A
2sec
Typical thermal resistance per leg RΘJA 22(2)
RΘJL 3.5(1) °C/W
Operating junction storage and temperature range TJ, TSTG -55 to +150 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Maximum instantaneous forward drop per leg
at 4.0 Amperes VF1.00 V
Maximum DC reverse current at rated TA= 25°C 5.0
DC blocking voltage per leg TA=125°C IR500 µA
Typical junction capacitance per leg at 4.0V, 1MHz CJ95 40 pF
Notes: (1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3cm) Al. plate
(2) Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5" (12 x12mm) copper pads
Dimensions in inches and (millimeters)
Features
• This series is UL listed under the Recognized
Component Index, file number E54214
• Glass passivated chip junction
• High case dielectric strength
• Typical IRless than 0.1µA
• High surge current capability
• Ideal for printed circuit boards
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
260°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3kg) tension
Mounting Position: Any
Weight: 0.071 oz., 2.0 g
Epoxy meets UL 94V-0 Flammability Rating
Packaging codes/options:
1/400 EA. per Bulk Tray Stack
Case Type GBL
GBL005 thru GBL10
Vishay Semiconductors
formerly General Semiconductor
www.vishay.com Document Number 88609
224-Aug-04
Ratings and
Characteristic Curves (TA= 25°C unless otherwise noted)
050 100 150
0
1.0
2.0
3.0
4.0
5.0
110 100
0
50
100
150
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
100
0.1 110 100
10
100
1,000
020 40 60 80 100
0.01
0.1
1
10
100
500
0.01 0.1 110 100
0.1
1
10
100
Fig. 1 -- Derating Curves Output
Rectified Current
Fig. 2 -- Maximum Non-Repetitive Peak
Forward Surge Current Per Leg
Fig. 4 -- Typical Reverse Leakage
Characteristics Per Leg
Fig. 6 -- Typical Transient Thermal
Impedance Per Leg
Fig. 3 -- Typical Forward Voltage
Characteristics Per Leg
Fig. 5 -- Typical Junction Capacitance
Per Leg
Average Forward Output Current (A)
Peak Forward Surge Current (A)
Instantaneous Reverse Current (A)
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
Junction Capacitance (pF)
Ambient Temperature (°C) Number of Cycles at 60Hz
Percent of Rated Peak Reverse Voltage (V)
t, Heating Time (sec.)
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
60 Hz Resistive or Inductive Load
P.C.B. Mounting
0.47 x 0.47" (12 x 12mm)
Copper pads with 0.375"
(9.5mm) lead length
TJ = 25°C
Pulse width = 300µs
1% Duty Cycle
TJ = TJ max.
Single Sine-Wave
(JEDEC Method)
TJ = 25°C
f = 1.0MHz
Vsig = 50mVp-p
1.0 Cycle
TA = 125°C
TA = 25°C
Heat-Sink Mounting
3.0 x 3.0 x 0.11" Thick
(7.5 x 7.5 x 0.3cm)
Aluminum Plate
50 — 400V
600 — 1000V
50 — 400V
600 — 1000V
