MOCD213M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Features Description U.L. recognized (File #E90700, Volume 2) The MOCD213M device consists of two gallium arsenide infrared emitting diodes optically coupled to two monolithic silicon phototransistor detectors, in a surface mountable, small outline plastic package. It is ideally suited for high density applications and eliminates the need for through-the-board mounting. VDE recognized (File #136616) (add option "V" for VDE approval, i.e, MOCD213VM) Dual channel coupler Convenient plastic SOIC-8 surface mountable package style Minimum current transfer ratio 100% with input current of 10mA Minimum BVCEO of 70 Volts guaranteed Standard SOIC-8 footprint, with 0.050" lead spacing Compatible with dual wave, vapor phase and IR reflow soldering High input-output isolation of 2500 VAC(rms) guaranteed Applications Feedback control circuits Interfacing and coupling systems of different potentials and impedances General purpose switching circuits Monitor and detection circuits Schematic ANODE 1 1 CATHODE 1 2 ANODE 2 3 CATHODE 2 4 (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 8 COLLECTOR 1 7 EMITTER 1 6 COLLECTOR 2 5 EMITTER 2 www.fairchildsemi.com MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers April 2009 Symbol Rating Value Unit 60 mA EMITTER IF Forward Current - Continuous Forward Current - Peak (PW = 100s, 120 pps) 1.0 A VR Reverse Voltage 6.0 V PD LED Power Dissipation @ TA = 25C Derate above 25C 90 0.8 mW mW/C VCEO Collector-Emitter Voltage 70 V VECO Emitter-Base Voltage 7.0 V IC Collector Current-Continuous 150 mA PD Detector Power Dissipation @ TA = 25C Derate above 25C 150 1.76 mW mW/C IF (pk) DETECTOR TOTAL DEVICE Input-Output Isolation Voltage (f = 60Hz, t = 1 min.) 2500 Vac(rms) PD Total Device Power Dissipation @ TA = 25C Derate above 25C 250 2.94 mW mW/C TA Ambient Operating Temperature Range -40 to +100 C Storage Temperature Range -40 to +150 C VISO Tstg (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 2 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Absolute Maximum Ratings (TA = 25C Unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Test Conditions Min. Typ.* Max. Unit EMITTER VF Input Forward Voltage IF = 30mA 1.25 1.55 V IR Reverse Leakage Current VR = 6.0V 0.001 100 A C Capacitance 18 pF DETECTOR ICEO1 Collector-Emitter Dark Current ICEO2 VCE = 10 V, TA = 25C 1.0 50 nA VCE = 10 V, TA = 100C 1.0 A BVCEO Collector-Emitter Breakdown Voltage IC = 100A 70 120 V BVECO Emitter-Collector Breakdown Voltage IE = 100A 7.0 7.8 V CCE Collector-Emitter Capacitance f = 1.0MHz, VCE = 0V 7.0 pF Current Transfer Ratio(4) IF = 10mA, VCE = 10V COUPLED CTR VCE (sat) Collector-Emitter Saturation 100 % IC = 2.0mA, IF = 10mA 0.15 0.4 V Voltage ton Turn-On Time IC = 2.0mA, VCC = 10V, RL = 100 (Fig. 6) 3.0 s toff Turn-Off Time IC = 2.0mA, VCC = 10V, RL = 100 (Fig. 6) 2.8 s tr Rise Time IC = 2.0mA, VCC = 10V, RL = 100 (Fig. 6) 1.6 s tf Fall Time IC = 2.0mA, VCC = 10V, RL = 100 (Fig. 6) 2.2 s VISO RISO CISO Isolation Surge Voltage(1)(2)(3) Isolation Resistance (2) Isolation Capacitance (2) f = 60Hz, t = 1 min. 2500 Vac(rms) VI-O = 500V 1011 VI-O = 0V, f = 1MHz 0.2 pF *Typical values at TA = 25C Notes: 1. Input-Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating. 2. For this test, Pins 1, 2, 3 and 4 are common and Pins 5, 6, 7 and 8 are common. 3. VISO rating of 2500 VAC(rms) for t = 1 min. is equivalent to a rating of 3,000 VAC(rms) for t = 1 sec. 4. Current Transfer Ratio (CTR) = IC/IF x 100%. (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 3 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Electrical Characteristics (TA = 25C unless otherwise specified) Fig. 2 Output Curent vs. Input Current Fig. 1 LED Forward Voltage vs. Forward Current 1.8 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 VF - FORWARD VOLTAGE (V) 1.7 1.6 1.5 1.4 TA = -55C 1.3 1.2 TA = 25C 1.1 TA = 100C 1.0 1 10 100 VCE = 5V NORMALIZED TO IF = 10mA 1 0.1 IF - LED FORWARD CURRENT (mA) 0.01 0.1 1 Fig. 3 Output Current vs. Ambient Temperature 10 100 IF - LED INPUT CURRENT (mA) Fig. 4 Output Current vs. Collector - Emitter Voltage 1.6 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 1 NORMALIZED TO TA = 25 o C 0.1 -80 -60 -40 -20 0 20 40 60 80 100 1.4 1.2 1.0 0.8 0.6 0.4 0.2 I F = 10mA NORMALIZED TO VCE = 5V 0.0 0 120 1 2 3 4 5 6 7 8 9 10 VCE - COLLECTOR-EMITTER VOLTAGE (V) o TA - AMBIENT TEMPERATURE ( C) Fig. 5 Dark Current vs. Ambient Temperature I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 10000 VCE = 10V 1000 100 10 1 0.1 0 20 40 60 80 100 o TA - AMBIENT TEMPERATURE ( C) (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 4 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Typical Performance Curves WAVEFORMS VCC = 10V INPUT PULSE IF IC INPUT RL 10% OUTPUT OUTPUT PULSE 90% tr Adjust IF to produce IC = 2mA ton tf toff Figure 6. Switching Time Test Circuit and Waveform (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 5 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers TEST CIRCUIT 8-pin SOIC Surface Mount 8 0.164 (4.16) 0.144 (3.66) SEATING PLANE 1 0.202 (5.13) 0.182 (4.63) 0.010 (0.25) 0.006 (0.16) 0.143 (3.63) 0.123 (3.13) 0.021 (0.53) 0.011 (0.28) 0.008 (0.20) 0.003 (0.08) 0.244 (6.19) 0.224 (5.69) 0.050 (1.27) Typ. Lead Coplanarity: 0.004 (0.10) MAX Recommended Pad Layout 0.024 (0.61) 0.060 (1.52) 0.275 (6.99) 0.155 (3.94) 0.050 (1.27) Dimensions in inches (mm). Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 6 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Package Dimensions MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Ordering Information Option Order Entry Identifier V V R2 R2 R2V R2V Description VDE 0884 Tape and reel (2500 units per reel) VDE 0884, Tape and reel (2500 units per reel) Marking Information 1 D213 V X YY S 3 4 2 6 5 Definitions (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `8' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code www.fairchildsemi.com 7 8.0 0.10 2.0 0.05 3.50 0.20 0.30 MAX O1.5 MIN 1.75 0.10 4.0 0.10 5.5 0.05 8.3 0.10 5.20 0.20 0.1 MAX 6.40 0.20 12.0 0.3 O1.5 0.1 User Direction of Feed Dimensions in mm (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 8 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Carrier Tape Specifications MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 8 minutes max. www.fairchildsemi.com 9 Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) (R) FAST FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2005 Fairchild Semiconductor Corporation MOCD213M Rev. 1.0.1 www.fairchildsemi.com 10 MOCD213M -- Dual Channel Phototransistor Small Outline Surface Mount Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.