TCA4 Series TCXO / TCVCXO November 2010 * Pletronics' TCA4 Series is a temperature compensated crystal oscillator with an optional voltage control function and a clipped sinewave output. * The package is designed for high density surface mount designs. * Tape and Reel packaging is available. * 10 to 40 MHz * 5 x 7 mm LCC Ceramic Package * Optional Voltage Control Function (TCVCXO) * Pletronics Inc. certifies this device is in accordance with the RoHS (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB's, PBDE's Weight of the Device: 0.17 grams Moisture Sensitivity Level: 1 As defined in J-STD-020D.1 Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +6.5V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition A Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product informatin is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necesarily include testing of all parameters. Copyright (c) 2010, Pletronics Inc. TCA4 Series TCXO / TCVCXO November 2010 Part Number: TCA4 027 050 G H 015 008 -12.75M -XX Internal code or blank Nominal Frequency in MHz Pullability in ppm (Vcontrol) 000 = TCXO only 008 = + _ 8 ppm minimum 012 = + _ 12 ppm minimum Stability in ppm 005 = + _ 0.5 ppm 010 = + _ 1 ppm 015 = + _ 1.5 ppm 025 = + _ 2.5 ppm Highest Specified Operating Temperature A = +40oC E = +60oC J = +80oC B = +45oC F = +65oC K = +85oC C = +50oC G = +70oC D = +55oC H = +75oC Lowest Specified Operating Temperature A = +10oC E = -10oC J = -30oC F = -15oC K = -35oC B = +5oC o o G = -20 C L = -40oC C = +0 C o o H = -25 C D = -5 C Highest Supply Voltage* 050 = 5.0 volts 036 =3.6 volts Lowest Supply Voltage * 029 = 2.9 volts 027 = 2.7 volts Series (Part Type, Logic & Package) * Supply Voltage: Select range between 2.7V and 5.0V with Highest / Lowest < 1.20 For Example: the part number for 3.3V nominal would be TCA4030036......... Part Marking: Tcywwa fff.fff M PLHXXX Where: ywwa fff.fff P LH XXX = Date code = frequency in MHz = Pletronics = Lowest Temp, Highest Temp = Stability Due to part size limitations, marking cannot identify complete specifications. A Certificate of Conformance will accompany these parts. www.pletronics.com 425-776-1880 2 TCA4 Series TCXO / TCVCXO November 2010 Electrical Specification for specified Vcc over the specified temperature range Item Min Max Unit 10 40 MHz Frequency Accuracy 1 -2.5 +2.5 ppm Vcontrol 1.50 volts if used Frequency Stability / Supply -0.2 +0.2 ppm Load: 10K ohm // 10 pF & Vcc + _ 5% Frequency Range Output Waveform Condition Clipped Sinewave Output Level 0.8 - V p-p Phase Noise - -135 dBc/Hz 2.7 5.0 Volts - 4.0 mA -1.0 +1.0 ppm Per year @ 25oC 0.5 2.50 Volts 1.50 volts nominal -12 +12 ppm Operating Temperature Range 1 -40 +85 o Storage Temperature Range -55 +95 o V Supply Range 1 Supply Current VCC ICC Aging Vcontrol Range Frequency Pullability 1 1 Load: 10K ohm + _ 10% // 10 pF + _ 10% Typical at 1 kHz C C Specified by part number ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII www.pletronics.com Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial 425-776-1880 3 TCA4 Series TCXO / TCVCXO November 2010 Mechanical: Pad dimensions are typical. Actual dimensions may vary. Inches Not to Scale 1 Contacts : Gold 11.8 inches IMPORTATNT: Pad Typical dimensions 0.3 m minimum over Nickel 50 to 350 inches mm A 0.276 + _0.006 7.00 + _0.15 B 0.197 + _0.006 5.00 + _0.15 C 0.074 + _0.006 1.88 + _0.15 D1 0.038 0.96 E1 0.200 5.08 F1 0.004 0.10 G1 0.039 1.00 1 H 0.047 1.20 I1 0.024 0.60 J1 0.004 0.10R K1 0.008 0.020R 1.27 to 8.89 m The additional package connections are not to be connected and shall remain open circuits. These are pads for programming the performance of the VCTCXO. The location of these pads will vary. Function Note 1 Vcontrol Input If this function is not specified, recommend connecting this pad to ground. 2 Ground (GND) 3 Output 4 Supply Voltage (VCC) Recommend connecting appropriate power supply bypass capacitors as close as possible. Layout and application information For Optimum Jitter Performance, Pletronics recommends: * a ground plane under the device * no large transient signals (both current and voltage) should be routed under the device * do not layout near a large magnetic field such as a high frequency switching power supply * do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 4 TCA4 Series TCXO / TCVCXO November 2010 Reflow Cycle (typical for lead free processing) 260C Maximum 10 Seconds Maximum Temperature (C) 250 215C10C 200 175C10C 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size D0 D1 Min 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _0.1 + 8mm E1 P0 1.0 24mm P2 S1 Min T Max 0.6 0.6 T1 Max 2.0 +0.05 _ 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 16 mm 12.1 14.25 7.5 _ +0.1 8.0 + _0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width C mm 13.0 +0.5 / -0.2 D mm 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.0 mm --- --- 24.4 +2.0 -0.0 24.0 mm --- --- 32.4 +2.0 -0.0 32.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 5 TCA4 Series TCXO / TCVCXO November 2010 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE's terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE's limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 Fax: 425-776-2760 19013 36th Ave. W, Suite H Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright (c) 2005, 2006, 2007, 2008, 2009, 2010 Pletronics Inc. www.pletronics.com 425-776-1880 6