INTEGRATED CIRCUITS DATA SHEET 74LVC86A Quad 2-input EXCLUSIVE-OR gate Product specification Supersedes data of 2003 Nov 11 2004 Mar 04 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A FEATURES DESCRIPTION * 5 V tolerant inputs, for interfacing with 5 V logic The 74LVC86A is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. * Supply voltage range from 1.2 to 3.6 V * CMOS low power consumption Inputs can be driven from either 3.3 or 5 V devices. This feature allows the use of these devices as translators in a mixed 3.3 and 5 V environment. * Direct interface with TTL levels * Inputs accept voltage up to 5.5 V * Complies with JEDEC standard no. 8-1A The 74LVC86A provides the 2-input EXCLUSIVE-OR function. * ESD protection: HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V. * Specified from -40 to +85 C and -40 to +125 C. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf 2.5 ns. SYMBOL PARAMETER tPHL/tPLH propagation delay nA, nB to nY CI input capacitance CPD power dissipation capacitance per gate CONDITIONS CL = 50 pF; VCC = 3.3 V VCC = 3.3 V; notes 1 and 2 TYPICAL 3.0 ns 5.0 pF 20 pF Notes 1. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; (CL x VCC2 x fo) = sum of the outputs. 2. The condition is VI = GND to VCC. FUNCTION TABLE See note 1. INPUT OUTPUT nA nB nY L L L L H H H L H H H L Note 1. H = HIGH voltage level; L = LOW voltage level. 2004 Mar 04 2 UNIT Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A ORDERING INFORMATION PACKAGE TYPE NUMBER TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE 74LVC86AD -40 to +125 C 14 SO14 plastic SOT108-1 74LVC86ADB -40 to +125 C 14 SSOP14 plastic SOT337-1 74LVC86APW -40 to +125 C 14 TSSOP14 plastic SOT402-1 74LVC86ABQ -40 to +125 C 14 DHVQFN14 plastic SOT762-1 PINNING PIN SYMBOL DESCRIPTION 1 1A data input 2 1B data input 3 1Y data output 4 2A data input 5 2B data input 6 2Y data output 7 GND ground (0 V) 8 3Y data output 9 3A data input 10 3B data input 11 4Y data output 12 4A data input 13 4B data input 14 VCC supply voltage 2004 Mar 04 3 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A handbook, halfpage 1A VCC 1 14 handbook, halfpage 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 2B 5 10 3B 2Y 6 9 GND 7 8 3Y 86 11 4Y 3A 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A MNA785 GND(1) Top view 7 8 GND 3Y MNA977 (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. Fig.1 Pin configuration SO14 and (T)SSOP14. Fig.2 Pin configuration DHVQFN14. handbook, halfpage 1 =1 3 =1 6 =1 8 =1 11 2 handbook, halfpage 1 2 1A 1B 1Y 3 4 5 2A 2B 2Y 6 5 9 10 3A 3B 3Y 8 9 12 13 4A 4B 4 10 4Y 11 12 MNA787 13 MNA786 Fig.3 Logic symbol. 2004 Mar 04 Fig.4 Logic symbol (IEEE/IEC). 4 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A handbook, halfpage A Y B MNA788 Fig.5 Logic diagram (one gate). RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage 1.2 3.6 V VI input voltage 0 5.5 V VO output voltage 0 VCC V Tamb operating ambient temperature in free air -40 +125 C tr, tf input rise and fall times VCC = 1.2 to 2.7 V 0 20 ns/V VCC = 2.7 to 3.6 V 0 10 ns/V for maximum speed performance for low-voltage applications 2.7 3.6 V LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS VCC supply voltage IIK input diode current VI < 0 MIN. MAX. UNIT -0.5 +6.5 V - -50 mA VI input voltage note 1 -0.5 +6.5 V IOK output diode current VO > VCC or VO < 0 - 50 mA VO output voltage note 1 -0.5 VCC + 0.5 V VO = 0 to VCC IO output source or sink current - 50 mA ICC, IGND VCC or GND current - 100 mA Tstg storage temperature -65 +150 C Ptot power dissipation - 500 mW Tamb = -40 to +125 C; note 2 Notes 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. For SO14 packages: above 70 C the value of Ptot derates linearly with 8 mW/K. For (T)SSOP14 packages: above 60 C the value of Ptot derates linearly with 5.5 mW/K. For DHVQFN14 packages: above 60 C the value of Ptot derates linearly with 4.5 mW/K. 2004 Mar 04 5 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A DC CHARACTERISTICS At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = -40 to +85 C; note 1 HIGH-level input voltage 1.2 VCC - - V 2.7 to 3.6 2.0 - - V VIL LOW-level input voltage 1.2 - - GND V 2.7 to 3.6 - - 0.8 V VOH HIGH-level output voltage IO = -100 A 2.7 to 3.6 VCC - 0.2 VCC - V IO = -12 mA 2.7 VCC - 0.5 - - V IO = -18 mA 3.0 VCC - 0.6 - - V IO = -24 mA 3.0 VCC - 0.8 - - V IO = 100 A 2.7 to 3.6 - GND 0.20 V IO = 12 mA 2.7 - - 0.40 V IO = 24 mA 3.0 - - 0.55 V VIH VOL LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = 5.5 V or GND 3.6 - 0.1 5 A ICC quiescent supply current VI = VCC or GND; IO = 0 3.6 - 0.1 10 A ICC additional quiescent supply current per input pin VI = VCC - 0.6 V; IO = 0 2.7 to 3.6 - 5 500 A 2004 Mar 04 6 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = -40 to +125 C VIH VIL VOH VOL HIGH-level input voltage 1.2 VCC - - V 2.7 to 3.6 2.0 - - V LOW-level input voltage 1.2 - - GND V 2.7 to 3.6 - - 0.8 V HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = -100 A 2.7 to 3.6 VCC - 0.3 - - V IO = -12 mA 2.7 VCC - 0.65 - - V IO = -18 mA 3.0 VCC - 0.75 - - V IO = -24 mA 3.0 VCC - 1.0 - - V IO = 100 A 2.7 to 3.6 - - 0.3 V IO = 12 mA 2.7 - - 0.6 V IO = 24 mA 3.0 - - 0.8 V VI = VIH or VIL ILI input leakage current VI = 5.5 V or GND 3.6 - - 20 A ICC quiescent supply current VI = VCC or GND; IO = 0 3.6 - - 40 A ICC additional quiescent supply current per input pin VI = VCC - 0.6 V; IO = 0 2.7 to 3.6 - - 5000 A Note 1. All typical values are measured at VCC = 3.3 V and Tamb = 25 C. 2004 Mar 04 7 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A AC CHARACTERISTICS GND = 0 V; tr = tf 2.5 ns. TEST CONDITIONS SYMBOL PARAMETER MIN. WAVEFORMS TYP. MAX. UNIT VCC (V) Tamb = -40 to +85 C; note 1 tPHL/tPLH tsk(0) propagation delay nA, nB to nY skew 1.2 - 11 2.7 1.0 3.4 5.8 ns 3.0 to 3.6 1.0 3.0(2) 5.0 ns note 3 3.0 to 3.6 - - 1.0 ns see Figs 6 and 7 1.2 - - - ns 2.7 1.0 - 9.0 ns 3.0 to 3.6 1.0 - 6.5 ns 3.0 to 3.6 - - 1.5 ns see Figs 6 and 7 - ns Tamb = -40 to +125 C tPHL/tPLH tsk(0) propagation delay nA, nB to nY skew note 3 Notes 1. All typical values are measured at Tamb = 25 C. 2. This typical value is measured at VCC = 3.3 V. 3. Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design. AC WAVEFORMS handbook, halfpage VI VM nA, nB input GND tPHL tPLH VOH VM nY output VOL MNA224 VM = 1.5 V at VCC 2.7 V. VM = 0.5VCC at VCC < 2.7 V. VOL and VOH are typical output voltage drop that occur with the output load. Fig.6 The inputs nA and nB to output nY propagation delay. 2004 Mar 04 8 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A VEXT handbook, full pagewidth VCC VI PULSE GENERATOR RL VO D.U.T. CL RT RL MNA616 VCC VI CL RL (1) VEXT tPLH/tPHL 1.2 V VCC 50 pF 500 open 2.7 V 2.7 V 50 pF 500 open 3.0 to 3.6 V 2.7 V 50 pF 500 open Note 1. The circuit performs better when RL = 1000 . Definitions for test circuit: RL = Load resistor. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. Fig.7 Load circuitry for switching times. 2004 Mar 04 9 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A PACKAGE OUTLINES SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index Lp 1 L 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 1.05 1.0 0.4 0.7 0.6 0.25 0.25 0.1 0.7 0.3 0.01 0.019 0.0100 0.35 0.014 0.0075 0.34 0.16 0.15 0.010 0.057 inches 0.069 0.004 0.049 0.05 0.244 0.039 0.041 0.228 0.016 0.028 0.024 0.01 0.01 0.028 0.004 0.012 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT108-1 076E06 MS-012 2004 Mar 04 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 10 o 8 o 0 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm D SOT337-1 E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index Lp L 7 1 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 7.9 7.6 1.25 1.03 0.63 0.9 0.7 0.2 0.13 0.1 1.4 0.9 8 o 0 Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT337-1 2004 Mar 04 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-150 11 o Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 E D A X c y HE v M A Z 8 14 Q (A 3) A2 A A1 pin 1 index Lp L 1 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 1 0.75 0.50 0.4 0.3 0.2 0.13 0.1 0.72 0.38 8 o 0 Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT402-1 2004 Mar 04 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-18 MO-153 12 o Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT762-1 14 terminals; body 2.5 x 3 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 6 y y1 C v M C A B w M C b L 1 7 14 8 Eh e 13 9 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A(1) max. A1 b c D (1) Dh E (1) Eh e e1 L v w y y1 mm 1 0.05 0.00 0.30 0.18 0.2 3.1 2.9 1.65 1.35 2.6 2.4 1.15 0.85 0.5 2 0.5 0.3 0.1 0.05 0.05 0.1 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT762-1 --- MO-241 --- 2004 Mar 04 13 EUROPEAN PROJECTION ISSUE DATE 02-10-17 03-01-27 Philips Semiconductors Product specification Quad 2-input EXCLUSIVE-OR gate 74LVC86A DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2004 Mar 04 14 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA76 (c) Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R20/04/pp15 Date of release: 2004 Mar 04 Document order number: 9397 750 12966