Cable Assemblies.qxd 9/17/01 9:48 PM Page 1 Cable Assemblies Cable Assemblies.qxd 9/17/01 9:48 PM Page 2 Experience Amphenol's cable assembly expertise dates back to the first industry standard connector (SMA), over 25 years ago. As new fiber optic connectors have entered the industry, Amphenol has carefully selected the most robust and reliable connectors to participate in their design and development. Our in depth understanding of connector design, and the complete control of connector materials, make Amphenol cable assemblies one of the best in the industry. Product Breadth Amphenol offers a comprehensive line of single mode and multimode cable assemblies in a variety of cable configurations with SC, FC, LX.5(R)*, LC, ST (R), SMA, MT-RJ, and MTP(R) (MPO) type connectors. Both standard and custom assemblies are available for a wide variety of applications. From simplex jumpers to multi-fiber drop cables to ribbon breakouts to optical fabric assemblies, Amphenol can design and supply all of your cable assembly needs. Consistent Quality High quality polishing processes have been developed to meet and exceed industry standards specifications for insertion loss, return loss, and endface geometry. Attention to process control ensures high-yield processes and consistent quality. Additionally, all assemblies are designed to intermateability standards for optical and physical performance criteria, as dictated by EIA/TIA, IEC, JIS, NTT, ANSI, and Telcordia (where applicable). Single Mode Cables: Page 3 Multimode Cables: Page 4 Duplex Cables: Page 5 Complete Testing Performance testing is one of Amphenol's fundamental strengths. Connector and cable materials are extensively inspected prior to assembly. Every cable receives 100% inspection for both insertion loss and visual defects (under 1200X video magnification). Interferometers are used for accurate endface geometry testing. Multi-fiber Cables: Page 6 Creative and Functional Designs You specify the functionality of the cable assembly and our talented, enthusiastic, and friendly mechanical and optical engineers develop an "end-to-end" solution. Design creativity, experience and a deep understanding of your application ensure a functional and manufacturable design. Manufacturing Expertise & Delivery Precision Amphenol delivers. Meticulous attention to capacity and material planning allow Amphenol to meet our committed ship dates on time. Every time. Amphenol knows volume manufacturing. Rapid ramp-up of challenging new products is one of our strengths. * LX.5 is a registered trademark of ADC Telecommunications, Inc. ST is a registered trademark of AT&T. MTP is registered trademark of US Conec, Ltd. Ribbon Cables: Page 7 Service Cables: Page 9 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 Cable Assemblies.qxd 9/17/01 9:48 PM Page 3 In order to produce high quality, reliable cable assemblies, there are a number of physical characteristics that must be addressed. Many of these issues have been thoroughly outlined in IEC, EIA/TIA, JIS and Telcordia standards. They include acceptable parameters for intermateability, insertion loss, return loss, radius of curvature, apex offset and fiber height. Other issues that attribute to long term reliability are ferrule/fiber fit, ferrule concentricity, and ferrule surface defects. The following diagrams illustrate some critical components of a fiber optic cable assembly. Misalignment - Fiber core alignment is critical to a cable assembly's ability to transmit light. Main causes of misalignment are typical mechanical issues associated with low quality connectors or fiber: ferrule concentricity, hole tolerances, fiber eccentricity, and variations in core diameter. Surface Defects - Visual defects are one of the most common causes of latent failures. Scratches, pits, and chips in the ferrule endface can change over time, becoming more pronounced and migrating to critical areas of the fiber core, thus affecting performance. They are also a prime source for deposits of dust, moisture, and other contaminants. Radius of Curvature Fiber Height Photo not to scale. Features exaggerated. Radius of Curvature - The endface of the connector is given a specific radius during the polishing process. This radius provides the basis for ensuring that both fibers make contact. Both the apex offset and fiber heights are dependent on the radius of curvature being within the predetermined parameters. Fiber Height - Physical contact of the fiber is necessary for proper light transfer. The end-face geometry has strict fiber protrusion limits, as well as fiber undercut limits. These limits are based exclusively on a mathematical calculation of the radius of curvature. If the fiber is too high, damage to the endface may occur. If the fiber is too low, the physical contact may never occur, causing increased attenuation and reflectance. apex offset Photo not to scale. Features exaggerated. Conversion Chart 1 meter = 3.281 feet 1 meter = 39.37 inches 1 cm = 0.0328 feet 1 cm = 0.3937 inches 1 foot = 0.3048 meter 1 inch = 25.4 mm Apex Offset - Physical contact connectors feature a radius on the endface. The peak of the radius is known as the apex. The relationship from the apex to the `perfect' center of the ferrule, is known as the apex offset. Strict control of this specification is mandatory in order to precisely control the distance of each fiber from the surface of the connector and to ensure physical contact upon mating. SINGLE MODE SC, FC, LX.5, LC & ST MT-RJ MPO MULTIMODE SC, FC, LX.5, LC, & ST 905 & 906 SMArt SMA MT-RJ & MPO Fiber Apex super (SPC) ultra (UPC) angle (APC) ultra (UPC) angle (APC) premium angle (PAPC) IL typical 0.18dB 0.14dB 0.23dB 0.20dB 0.25dB 0.15dB IL maximum 0.50dB 0.30dB 0.50dB 0.50dB 0.75dB 0.35dB super ceramic ferrule stainless steel ferrule super 0.35dB 0.56dB 0.77dB 0.35dB 0.50dB 1.00dB 1.50dB 0.75dB RL typical -52dB -61dB -70dB N/A -55dB -55dB RL maximum -45dB -55dB -65dB -35dB -55dB -55dB Note: Optical tuning is available for specific connectors, providing lower insertion loss `typicals'. 2 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:48 PM Page 4 Single Mode Assemblies Amphenol is a premier manufacturer of simplex, single mode patch cords in the telecommunications industry, consistently meeting or exceeding many of the industry standard requirements for optical transmission loss, reflectance, visual endface specifications and endface geometry. Amphenol offers standard patch cords in a variety of configurations, demonstrated in the diagrams below. Custom cable assemblies are available with ultra-tight optical specifications, precise length tolerances, or custom labeling and packaging. For custom patch cord requirements, please contact our Customer Service Department. Single Mode Cable Assembly Family Cable Length Assembly Type 0 = pigtail 1 = jumper Note: X X X X Polish Type 0 = super 5 = ultra 4 = 8angle X -- X X X X X side B Cable Type 2 = 2mm jacketed 3 = 3mm jacketed 5 = 900um jacketed 6 = 1.6m jacketed 9 = 900m buffered -- side A 942 Connector Type 2 = FC 4 = STII 5 = ST 6 = SC A = LX.5 C = LC Boot Type 1 = standard 2 = 90, side A 3 = 90, side B 4 = 90, side A & B Cable Length in Meters (i.e. 0015 = 15 meters) (see above) For pigtails, connector type side A and side B are identical (i.e. SC pigtail: connector type = 66). For hybrid jumpers, use the lowest number first (i.e. SC to FC : connector type = 26). LX.5 and LC cable assemblies not available with 3mm cable. 90 Boots are not available with 900m fiber and certain connectors. 3 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:49 PM Page 5 Multimode Assemblies Amphenol's multimode patch cords offer the convenience of high quality factory terminations using premium multimode and proven low-loss Amphenol connectors. The multimode cable assemblies feature excellent reliability, high performance, and are 100% optically and visually tested to the highest industry standards. Cable assemblies are available in a variety of standard configurations. Frequently used assemblies can be determined using the part number schematic below. Custom cable assemblies are available upon request. For SMA cable assemblies, please contact our Customer Service Department. Multimode Cable Assembly Family Cable Length Assembly Type 0 = pigtail 1 = jumper Note: X X X X Fiber Size 1 = 50/125 2 = 62.5/125 X -- X X X X X side B Cable Type 2 = 2mm jacketed 3 = 3mm jacketed 5 = 900m jacketed 6 = 1.6m jacketed 9 = 900m buffered -- side A 943 Connector Type 2 = FC 4 = STII 5 = ST 6 = SC A = LX.5 C = LC Boot Type 1 = standard 2 = 90, side A 3 = 90, side B 4 = 90, side A & B Cable Length in Meters (i.e. 0015 = 15 meters) (see above) For pigtail, connector type side A and B are identical (i.e. SC pigtail: connector type = 66). For hybrid jumpers, use the lowest number first (i.e. SC to FC: connector type = 26). LX.5 and LC jumpers not available for 3mm jacketed cable. 90 Boots are not available with 900m fiber and certain connectors. 4 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:49 PM Page 6 Duplex Assemblies Duplex cable assemblies provide significant advantages in applications where high speed data transfer is necessary. The permanent association of two fibers, typically one Tx and one Rx, simplifies cable management, fiber organization and maintenance by establishing a standard orientation between Tx and Rx, while unifying the fibers in zipcord cable. Amphenol's duplex cables are available with either simplex connectors (fanned out) or with duplex connectors (SC, LX.5 and LC applications). The duplex connectors utilize the same time-proven internal components as the simplex connectors, with the added feature of coupling them together. Duplex cable assemblies can be configured in a variety of configurations and layouts. Duplex Cable Assembly Family Overall Length -- X X Cable Type 2 = 2mm zipcord 3 = 3mm zipcord 6 = 1.6mm zipcord Assembly Type 2 = duplex jumper 5 = duplex pigtail Note: X X side A X Fiber Size/Polish Type 1 = m/m 50/125 2 = m/m 62.5/125 0 = s/m super 5 = s/m ultra 4 = s/m 8 angle -- X X X X X side B 94 X Fiber Type 2 = single mode 3 = multimode Connector Type 2 = FC 4 = STII 5 = ST 6 = SC A = LX.5 B = LX.5 duplex C = LC D = LC duplex E = SC duplex R = MT-RJ (female) J = MT-RJ (male) Boot Type 1 = standard 2 = 90, side A 3 = 90, side B 4 = 90, side A & B Cable Length in Meters (i.e. 0015 = 15 meters) For pigtail, connector type side A and B are identical (i.e. SC pigtail: connector type = 66). For hybrid jumpers, use the lowest number first (i.e. SC to FC: connector type = 26). LX.5, LC and MT-RJ jumpers not available for 3mm jacketed cable. 90 boots are not available with 900m fiber and certain connectors. 5 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:49 PM Page 7 Engineered Multi-fiber Assemblies Multi-fiber cable assemblies are enormously valuable in speeding up the installation process, by eliminating the need for unnecessary splicing or terminations in the field. Assemblies are available in various fiber counts, with distribution cable or outside plant cable (OSP). OSP cable assemblies utilize end-blocking kits for water protection and fanout tubing for fiber ruggedizing. Distribution is 900m tight buffered and typically not ruggedized, depending on the application. While these assemblies are most often pigtails, jumpers are also available and provide numerous installation advantages. The list below includes some typical multi-fiber cable assembly options. Call Amphenol Customer Service to speak with an application engineer to assist you with configuring the required cable assembly. Multi-fiber Cable Assembly CABLE TYPE ASSEMBLY TYPE Indoor Distribution Cable Outside Plant Cable Pigtail Jumper Fiber Count (Typical fiber counts are 2, 4, 6, 8, 10, 12, 24, 48, 72, 96 and 144) Overall Length Outer Jacket Strip Length FANOUT/FURCATION TYPE BREAKOUT LENGTH CONNECTOR AND POLISH SIDE A None (900m, tight buffered) 900m, mini-tube 900m, fanout box 2mm, heat shrink 2.5mm, heat shrink 3mm, heat shrink BREAKOUT LENGTH CONNECTOR TYPE FIBER/POLISH TYPE FC LX.5 LX.5 Duplex SC SC Duplex LC LC Duplex ST STII MT-RJ male or female MTP male or female M/M 50/125 M/M 62.5/125 S/M SUPER S/M ULTRA S/M ANGLE 6 CONNECTOR AND POLISH SIDE B www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:50 PM Page 8 Engineered Ribbon Cable Assemblies Amphenol offers a wide variety of engineered ribbon cable assemblies in a wide variety of configurations with custom labeling and testing to meet specific customer needs. Amphenol offers custom breakouts with a wide variety of fan-out cables with staggered leads and connector options. The diagram below will assist you in communicating your requirements for customized assemblies. Optical fabric assemblies are also available. Ribbon Cable Assembly Family Overall Length Overall Length Breakout Length 7 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:50 PM Page 9 CABLE TYPE ASSEMBLY TYPE 8 fiber, s/m bare ribbon 8 fiber, s/m jacketed ribbon 12 fiber, s/m bare ribbon 12 fiber, s/m jacketed ribbon Pigtail Jumper 8 fiber, m/m bare ribbon 8 fiber, m/m jacketed ribbon 12 fiber, m/m bare ribbon 12 fiber, m/m jacketed ribbon Overall Length FANOUT/FURCATION TYPE BREAKOUT LENGTH Equal leads Staggered Leads 900m, mini-tube 900m, fanout box 2mm, heat shrink 2.5mm, heat shrink 3mm, heat shrink BREAKOUT LENGTH CONNECTOR AND POLISH SIDE A Equal leads Staggered Leads CONNECTOR AND POLISH SIDE B CONNECTOR TYPE FIBER/POLISH TYPE FC LX.5 LX.5 Duplex SC SC Duplex LC LC Duplex ST STII MT-RJ male or female MTP male or female M/M 50/125 M/M 62.5/125 S/M SUPER S/M ULTRA S/M ANGLE 8 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:50 PM Page 10 Service Drop Cable/Node Cable Amphenol's Service Cable Assemblies are primarily used to link the fiber optic transport cable directly to the fiber optic processing equipment. This connection is critical and requires an environmental seal between the cable and the node housing. Amphenol's Service Cables utilize a unique feed-through adapter, featuring an anti-twist coupling body. The anti-twist feature, allows the coupling body to be secured to the outdoor housing, without twisting of the cable. Amphenol's Service Cables also use a fully water blocked loose tube cable, with either armored or non-armored versions available. Service Cable Assembly Family Assemblies can be equipped with a variety of breakout lengths, fan-out types or connector options. Features 5/8" -24 feed-through adapter spins independently, Breakout leads are color coded for easy identification preventing cable and furcation tubes from twisting Excellent thermal stability, less than 0.5dB variation in during installation insertion loss between -40C to +75C Standard non-armored cable meets OFNR/FT-4 and IEEE Anodized aluminum or stainless steel feed-through flammability requirements, yielding full outdoor protection adapter available and indoor compliance to the NEC riser cable requirements Multiple O-ring design provides superior weather protection 9 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:50 PM Page 11 Drawing Cable Length Breakout Length Ordering Information 962 -- X Assembly Type 1 = unarmored pigtail 2 = unarmored jumper 3 = armored pigtail 4 = armored jumper Connector/Polish Type 1 = SC/UPC 2 = SC/APC 4 = FC/UPC 5 = FC/APC 7 = STII/UPC 8 = ST/UPC A = LX.5/UPC B = LX.5/APC D = LC/UPC X X X 0 Fiber Count 1 = 2 fiber count 2 = 4 fiber count 3 = 6 fiber count 4 = 8 fiber count 5 = 10 fiber count 6 = 12 fiber count -- X X X X X Breakout Length in Centimeters (Number is right justified) Exceptions: 01 - 1 Meter Min. breakout = 5 cm Length in Meters (Number is right justified) Fanout Type 1 = 900m transparent leads 2 = 2mm color leads 3 = 3mm color leads 10 www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com Customer Service 800-944-6446 (c) 2001 Amphenol Corp. 9/01 Printed in U.S.A. Cable Assemblies.qxd 9/17/01 9:50 PM Page 12 Amphenol Corporation Website www.amphenol.com Worldwide Service & Support AMERICAS EUROPE ASIA & R.O.W. Amphenol Corporation Wallingford, CT, U.S.A. Phone: +1-203-265-8900 E-mail: aphinfo@amphenol.com Amphenol European Sales Operations Houten, The Netherlands Phone: +31-30-6358-000 E-mail: info@amphenol-nl.com Amphenol Japan. K.K. Chiyoda-ku, Tokyo, Japan Phone: +81-3-3263-5611 E-mail: info@amphenol.co.jp Amphenol Canada Corp. Scarborough, Ontario, Canada Phone: +1-416-291-4401 E-mail: mattL@amphenolcanada.com Amphenol RF/Coax Europe Houten, The Netherlands Phone: +31-30-6358-026 E-mail: info@amphenol-nl.com Amphenol Daeshin Electronics Precision Co., Ltd. Kyungki-Do, Korea Phone: +82-32-680-3800 E-mail: info@amphenol.co.kr Amphenol Interconnect Products Corporation Endicott, NY, U.S.A. Phone: +1-607-754-4444 E-mail: sales@aipc.fabrik.com Amphenol Gessellscaft GmbH Wien, Austria Phone: +43-1-895-1511 E-mail: info@amphenol-at.com Amphenol Spectra-Strip Operations Hamden, CT, U.S.A. Phone: +1-203-281-3200 Email: sales@spectra-strip.com Amphenol RF Division Danbury, CT., U.S.A. Phone: 1-203-796-2000 E-mail: 104704.2600@compuserve.com Amphenol do Brasil LTDA (AIPC) Cacapava, SP, Brazil Phone: +55-12-253-2502 E-mail: sales@aipc.fabrik.com Amphenol Corp. Argentina Buenos Aires, Argentina Phone: +54-11-4341-4565 E-mail: amphenol_argentina@compuserve.com Amphenol do Brasil LTDA. Sao Paulo - SP, Brazil Phone: +55-11-5185-2881 E-mail: amphenol@amphenol.com.br Amphenol Corp. Mexico CP 11560 Mexico D.F. Mexico Phone:+52-5-254-7283 E-mail: amphenol_mex@compuserve.com Times Fiber Communications, Inc. Wallingford, CT, U.S.A. Phone: 1-203-265-8500 E-mail: aphinfo@amphenol.com Amphenol East Asia Ltd. Kowloon, Hong Kong Phone: +852-2699-2663 E-mail: info@amphenol.com.hk Amphenol Iberica Madrid, Spain Phone: +34-91-673-2235 E-mail: info@amphenol-it.com Amphenol Taiwan Corp. Taoyuan, Taiwan Phone: +886-3-379-5677 E-mail: info@amphenol.com.tw Amphenol Italia S.p.A. Lainate (Milano), Italy Phone: +39-2-939-04192 Email: info@amphenol-it.com Amphenol South China Bao An, Shenzhen, China Phone: +86-755-719-9622 E-mail: +info@amphenol.com.cn Amphenol Scandinavia Upplands Vasby, Sweden Phone: +46-8-594-10040 E-mail: info@amphenol-se.com Shenzhen (China) Office Shenzhen, China Phone: +86-755-368-3575 E-mail: info@amphenol.com.cn Amphenol Limited Whitstable, Kent, Great Britain Phone: -44-227-773-200 E-mail: info@amphenol.co.uk Amphenol Ltd. (AIPC-UK) I Tech Division Glasgow, Renfrewshire Scotland, Great Britain Phone: +44-1-475-888-898 E-mail: 114776.1446@compuserve.com Guangzhou Amphenol Electronics Communications Guangzhou, China Phone: +86-20-3869-8808 E-mail: Thomang@gecamphenol.com Singapore Office Phone: +65-294-2128 E-mail: info@amphenol.com.sg Amphetronix Limited Bhosari Industrial Area Pune, India Phone: +91-20-7120363 E-mail: sales@amphenol-in.com Spectra-Strip Ltd. Romsey Hampshire Great Britain Phone: +44-1794-517-575 E-mail: sales@spectra-strip.com Amphenol Socoapex S.A. Dole Cedex, France Phone: +33-3-8482-9400 E-mail: webmaster@amphenol-socapex.com Amphenol Australia Ltd. Keysborough Vic, Australia Phone: +61-3-8796-8888 E-mail: info@amphenol.com.au Fiber Optic Products www.amphenol-fiberoptics.com sales@amphenol-fiberoptics.com 1-800-944-6446