SEMICONDUCTOR GENERAL CATALOG ASSPs Audio & Video Equipment ICs Communications Equipment ICs Automotive ICs Peripheral Equipment LSIs Other Consumer Product ICs 1 2010/9 SCE0004K Audio & Video Equipment ICs TV Set ICs (Audio Output ICs) Part Number TB2922HQ TB2924AFG TB2964FTG Package Use P-HZIP12-1.78B P-HSOP36-450-0.65 Operating Supply Voltage (V) Functions and Features Sound output power: 20 W x 2, MOS output stage; Class AB, mute, standby, various protection circuits Audio output ICs Sound output power: 20 W x 2, PWM analog-input Class-D amp Sound output power: 15 W x 2, I2S signal-input Class-D amp P-QFN48-0707-0.50 9 to 26 11 to 20 (18) 9 to 18 * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. TV Tuning & Channel Decoder ICs (PIF, SIF ICs) Part Number Package Use Operating Supply Voltage (V) Functions and Features TB1338FNG/FTG P-SSOP24-300-0.65A QFN36-P-0606-0.50 Multi-standard PLL PIF/SIF D/K, I, B/G, M, L, L', multi-standard PIF/SIF, FM radio receiver support, PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound, I2C bus 4.75 to 5.25 TB1350FNG/FTG P-SSOP24-300-0.65A QFN36-P-0606-0.50 D/K, I, B/G, M, PLL PIF/SIF D/K, I, B/G, M, FM radio receiver support, PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound, I2C bus 4.75 to 5.25 TB1351FTG QFN36-P-0606-0.50 Multi-standard PLL PIF/SIF D/K, I, B/G, M, L, L', multi-standard PIF/SIF, FM radio receiver support, PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound, I2C bus 4.75 to 5.25 TB1354FTG QFN36-P-0606-0.50 Multi-standard PLL PIF/SIF D/K, I, B/G, M, L, L', multi-standard PIF/SIF, FM radio receiver support, PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound, I2C bus 4.75 to 5.25 TB1356FTG QFN36-P-0606-0.50 Multi-standard PLL PIF/SIF D/K, I, B/G, M, L, L', multi-standard PIF/SIF, FM radio receiver support, PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound, I2C bus, TOP adjustment pin, analog AFT output 4.75 to 5.25 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. **: Under development (Channel Decoder ICs) Part Number TC90532XBG Package Operating Supply Voltage (V) P-FBGA177-1313-0.80C4 Digital BS broadcasting, digital CS broadcasting (ISDB-S), 8PSK, QPSK demodulation, error correction, digital terrestrial broadcasting (ISDB-T), OFDM demodulation, error correction, A/D converter, memory 3.0 to 3.6 1.1 to 1.3 8PSK demodulator OFDM demodulator (Two channels each) Digital BS broadcasting, digital CS broadcasting (ISDB-S), 8PSK, QPSK demodulation, error correction, digital terrestrial broadcasting (ISDB-T), OFDM demodulation, error correction, A/D converter, memory 3.0 to 3.6 1.1 to 1.3 OFDM demodulator Digital terrestrial broadcasting (ISDB-T), OFDM demodulation, error correction, A/D converter, memory 3.0 to 3.6 2.3 to 2.7 1.1 to 1.3 P-FBGA177-1313-0.80C4 TC90517WBG S-WFBGA76-040A01 Functions and Features 8PSK demodulator OFDM demodulator TC90522XBG TC90517FG Use P-LQFP64-1010-0.50E : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 2 2010/9 SCE0004K Audio ICs (AM/FM Receiver ICs) Part Number Package Description TB2132FNG P-SSOP30-300-0.65 Single-chip AM/FM stereo tuner with PLL TB2178FG P-LQFP48-0707-0.50 Front End IC for Digital IF sampling tuner system P-LQFP216-2424-0.40A TC94A90FG TC94B01FG ** P-LQFP64-1010-0.50 Intended Use Functions Car General Other Audio Audio Stereo Audio F/E IF Demodu- processor lation IF sampling AM/FM digital processing tuner and Audio Digital Signal Processor IF sampling AM/FM digital processing tuner Functions and Features Operating Voltage (V) TV bands, VCO for MPX, compliant with new FCC standards 1.8 to 5.5 AM/FM front-end, IF amplifier, DAC outputs for RF synchronization 8.3 IF-sampling ADC x 2 ch Multipath noise cancellation with dual tuners Multi-bit DA converter x 6 ch Output ports for IBOC decoders On-chip audio processor 3.3/1.5 IF-sampling ADC x 1 ch Multipath noise cancellation Multi-bit DA converter x 2 ch Output ports for IBOC decoders 3.3/1.5 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. **: Under development (Power Amp ICs) Part Number Package Intended Use Output Power (POUT) RecomCassette TV/Home mended RL = 4 RL = 8 Tape Car Stereos Stereos Recorders VCC Functions and Features Operating Voltage (V) TB2901HQ P-HZIP25-1.00F 13.2 V 25 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, high-side switch, Maximum power: 47 W x 4 ch, RL = 2 operation guaranteed 9 to 18 TB2902HQ P-HZIP25-1.00F 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, mute, Command-controlled standby mode, Maximum power: 41 W x 4 ch, RL = 2 operation guaranteed I2C-bus-controled self-diagnosis 9 to 18 TB2903HQ P-HZIP25-1.00F 13.2 V 25 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 47 W x 4 ch 9 to 18 TB2904HQ P-HZIP25-1.00F 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 43 W x 4 ch, speaker burnout prevention 9 to 18 TB2905HQ P-HZIP25-1.00F 13.2 V 25 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, Class-KB efficiency, Maximum power: 47 W x 4 ch, self-diagnosis 9 to 18 TB2906HQ P-HZIP25-1.00F 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 43 W x 4 ch, 34dB voltage gain, Speaker burnout prevention 9 to 18 9 to 18 TB2912HQ P-HZIP25-1.00F 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, mute, Command-controlled standby mode, Maximum power: 41 W x 4 ch, RL = 2 operation guaranteed I2C-bus-controled self-diagnosis TB2913HQ P-HZIP25-1.00F 13.2 V 25 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, clipping detector, Maximum power: 47 W x 4 ch 9 to 18 MOS amplifier for 4 BTL channels, standby switch, mute, Maximum power: 49 W x 4 ch, Class-KB efficiency, DC offset and short-circuit detection, Cross-wiring detection, RL = 2 operation guaranteed 8 to 18 TB2915HQ P-HZIP25-1.00F 13.2 V 24 W x 4 TB2921AHQ P-HZIP25-1.00F 13.2 V 25 W x 4 TB2922HQ P-HZIP12-1.78B 18 V 37 W x 2 22 W x 2 TB2923AHQ P-HZIP25-1.00F 13.2 V 25 W x 4 TB2924AFG HSOP36-P-450-0.65 15 V 19.5 W x 2 12 W x 2 TB2926HQ P-HZIP25-1.00F 13.2 V 23 W x 4 TB2929HQ P-HZIP25-1.00F 13.2 V TB2932AHQ P-HZIP25-1.00F TB2932HQ P-HZIP25-1.00F MOS amplifier for 4 BTL channels, standby switch, mute, high-side switch, Maximum power: 51 W x 4 ch, RL = 2 operation guaranteed 8 to 18 MOS amplifier for 2 BTL channels, standby switch, mute 9 to 26 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 51 W x 4 ch, RL = 2 operation guaranteed 8 to 18 Class D amplifier for 2 BTL channels, standby switch, mute, efficiency = 88% 11 to 18 (20) MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 49 W x 4 ch 8 to 18 21 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 45 W x 4 ch, AUX amp 8 to 18 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, mute, Command-controlled standby mode, Hardware-standby mode, RL = 2 operation guaranteed, I2C-bus-controled self-diagnosis, Selectable voltage gain (26/12 dB) 8 to 18 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, mute, Command-controlled standby mode, RL = 2 operation guaranteed I2C-bus-controled self-diagnosis, Selectable voltage gain (26/12 dB) 8 to 18 * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 3 2010/9 SCE0004K (Power Amp ICs) (Continued) Part Number Intended Use Output Power (POUT) Cassette RecomTV/Home mended RL = 4 RL = 8 Tape Car Stereos Stereos Recorders VCC Package Operating Voltage (V) Functions and Features 23 W x 4 MOS amplifier for 4 BTL channels, mute, Command-controlled standby mode, RL = 2 operation guaranteed I2C-bus-controled self-diagnosis, Selectable voltage gain (34/20 dB) 8 to 18 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, mute, Command-controlled standby mode, Maximum power: 41 W x 4 ch, RL = 2 operation guaranteed I2C-bus-controled self-diagnosis, 34dB voltage gain 9 to 18 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 49 W x 4 ch, 34dB voltage gain 8 to 18 P-HZIP25-1.00F 13.2 V 24 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 45 W x 4 ch, self-diagnosis 8 to 18 TB2946HQ P-HZIP25-1.00F 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, offset detection, Maximum power: 49 W x 4 ch, RL = 2 operation guaranteed 8 to 18 TB2956HQ P-HZIP25-1.00F 13.2 V 23 W x 4 MOS amplifier for 4 BTL channels, standby switch, mute, clipping detector Maximum power: 45 W x 4 ch 8 to 18 15 V 15 W x 2 MOS amplifier for 2 BTL channels, Muting control (soft mute, forced mute), Oversampling digital filter with an asynchronous sampling rate converter, De-emphasis, Digital attenuator, Protection circuits 9 to 18 P-HZIP25-1.00F TB2934HQ P-HZIP25-1.00F TB2936HQ P-HZIP25-1.00F TB2939HQ TB2933HQ 13.2 V TB2964FTG QFN48-P-0707-0.50 10 W x 2 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. (Headphone Amp ICs) Part Number TB2173FTG Package Intended Use Digital Headphone Mobile Portable Stereos Phones Stereos P-VQON44-P-0606-0.4 Output Power 9.5 mW (+B = 1.2 V, 16 ) Operating Voltage (V) Functions and Features Support for 2 sources, electric volume, bass boost with AGC, OCL/output capacitor coupling, GV = 8dB/24dB, beep, standby switch, mute, port expansion circuit +B = 0.9 to 4.5 VDD = 1.8 to 4.5 VCC = 1.8 to 4.5 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. (Digital Tuning Systems (DTS) ) Part Number Package System No. Features Remarks Operating Voltage (V) Crystal Oscillator ROM Size RAM Size Suitable for car stereos 4.5 MHz/ 75 kHz 16 bits x 16K 4 bits x 4096 LCD drive: 1/4, 1/3 & 1/2 duty, 1/2 & 1/3 bias IN: 35 lines OUT: 13 lines I/O: 40 lines 4.5 to 5.5 Display Format I/O Ports TC9324FG P-QFP100-1420-0.65Q TC9318AFAG P-LQFP64-1010-0.50E Low-voltage operation Single chip Suitable for portables 75 kHz 16 bits x 4K 4 bits x 256 LCD drive: 1/3 duty, 1/2 bias IN: 11 lines OUT: 33 lines I/O: 10 lines 1.8 to 3.6 TC9327BFG P-QFP80-1212-0.50F Low-voltage operation Single chip Suitable for portables 75 kHz 16 bits x 7K 4 bits x 256 LCD drive: 1/4 duty, 1/2 bias IN: 9 lines OUT: 33 lines I/O: 24 lines 1.8 to 3.6 TC9328AFG P-QFP80-1212-0.50F Low-voltage operation Single chip Suitable for portables 75 kHz 16 bits x 8K 4 bits x 512 LCD drive: 1/4 duty, 1/2 bias IN: 8 lines OUT: 21 lines I/O: 36 lines 0.9 to 1.8 TC9329AFAG P-LQFP64-1010-0.50A P-TFP64-1010-0.50C Low-voltage operation Single chip Suitable for portables 75 kHz 16 bits x 4K 4 bits x 256 LCD drive: 1/4 duty, 1/2 bias IN: 4 lines OUT: 16 lines I/O: 28 lines 0.9 to 1.8 TC9349AFG P-LQFP64-1010-0.50E Low-voltage operation Single chip Suitable for portables 75 kHz 16 bits x 8K 4 bits x 512 LCD drive: 1/4 duty, 1/2 & 1/3 bias IN: 4 lines OUT: 2 lines I/O: 45 lines 0.9 to 1.8 DTS-20 DTS-21 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 4 2010/9 SCE0004K (Analog Switches) Part Number Package TC9162CNG/CFG TC9163CNG/CFG TC9164CNG/CFG P-SDIP28-400-1.78 P-SOP28-450-1.27B TC9273CNG/CFG P-SDIP28-400-1.78 P-SOP28-450-1.27B TC9274CNG/CFG P-SDIP42-600-1.78 P-QFP44-1414-0.80K TC94A46CNG/CFG P-SDIP42-600-1.78 P-QFP80-1420-0.80M P-QFP80-1420-0.80M TC94A88FG * Operating Voltage (V) Features VDD VSS 6.0 to 17.0 -17.0 to -6.0 6.0 to 17.0 -17.0 to -6.0 6.0 to 17.0 -17.0 to -6.0 6.0 to 17.0 -17.0 to -6.0 6.0 to 17.0 -17.0 to -6.0 High breakdown voltage, analog function switch array 14-circuit, 3-contact analog switch x 2 6.0 to 17.0 -17.0 to -6.0 High breakdown voltage, analog function switch array 13-circuit, 4-contact analog switch x 2 6.0 to 17.0 -17.0 to -6.0 High breakdown voltage, analog function switch array High breakdown voltage, analog function switch array semi-customization available : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. *: New product (Electronic Volume Control ICs) Part Number Package TC9235APG/AFG TC9260APG/AFG P-DIP16-300-2.54A P-SOP16-300-1.27 TC9459BNG/BFG P-SDIP28-400-1.78 P-SOP28-450-1.27B TC9482BNG/BFG P-SDIP28-400-1.78 P-SOP28-450-1.27B Classification Volume control High-breakdown-voltage volume control Operating Voltage (V) Features VDD VSS Up/down-type electronic volume control 4.5 to 12.0 Serial-data-controlled electronic volume control 4.5 to 12.0 High breakdown voltage, serial-data-controlled electronic volume control + loudness control 6.0 to 17.0 -17.0 to -6.0 High breakdown voltage, 6-channel serial-data-controlled electronic volume control 6.0 to 17.0 -17.0 to -6.0 TC94A32BFG TC94A27BUG P-SOP28-450-1.27B High breakdown voltage, serial-data-controlled electronic volume control with trim volume 6.0 to 17.0 -17.0 to -6.0 P-LQFP44-1010-0.80A 4-channel serial-data-controlled electronic volume control with trim volume 6.0 to 17.0 -17.0 to -6.0 TC94A81UG P-LQFP44-1010-0.80A High breakdown voltage, 2-channel serial-data-controlled electronic volume control with trim volume, 4-input selector and zero crossing detection circuit 6.0 to 17.0 -17.0 to -6.0 TC9422ANG/AFG Volume, 2-band tone control, 4-input selector 6.0 to 12.0 TC9498ANG/AFG * 6-channel serial-data-controlled electronic volume control with trim volume settings (single power supply) 4.5 to 14.0 6-channel serial-data-controlled electronic volume control with trim volume settings (dual power supplies) 4.5 to 7.0 -7.0 to -4.5 P-SDIP28-400-1.78 P-SOP28-450-1.27B Single-chip volume control TC9499ANG/AFG : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. *: New product (PLLs, Prescalers) Part Number TC9256APG TC9256AFG TC9257APG TC9257AFG Package Classification Features P-DIP16-300-2.54A P-SOP16-300-1.27 Operating Voltage (V) 4.5 to 5.5 PLL High-speed PLL incorporating a DTS prescaler P-DIP20-300-2.54A P-SOP20-300-1.27 4.5 to 5.5 4.5 to 5.5 4.5 to 5.5 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 5 2010/9 SCE0004K (Compact Disc Player ICs) Part Number Package Classification P-LQFP100-1414-0.50C Single-chip processor TC94A15FG Operating Voltage (V) Features Sync separation, EFM demodulation, error detection/correction, error-corrected output, microcontroller interface, search control, digital equalizer, text data decoding, variable-speed playback, x8 oversampling digital filter, 1-bit DA converter, Integrated head amp x4 play back mode for CD-DA/R CD-RX system 3.3/5 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. (CD/MP3 Player IC) Part Number TC94A92FG Package P-LQFP80-1212-0.50F Classification Single-chip processor Operating Voltage (V) Features CD-DA/R/RW: x2 playback, low power consumption, 1-Mbit SRAM (128 Kwords x 8 bits), standby mode Supports various compressed audio formats: MP3, WMA, AAC RF amp, CD digital servo, 8fs digital filter Multi-bit DA converter 3.3/1.5 : Dry-packed * The products shown in italic are manufactured in offshore fabs. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. (Digital Signal Processor for Digital Amp System Applications) Part Number TC94A34FG Package P-LQFP64-1010-0.50E Classification Audio digital signal processor Features Low power consumption, 1-Mbit SRAM (128 Kwords x 8 bits) Supports various compressed audio formats: MP3, WMA, AAC Program ROM (20 K), program RAM (4 K), standby mode Operating Voltage (V) 3.3/1.5 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 6 2010/9 SCE0004K Communications Equipment ICs (Bipolar/Bi-CMOS ICs) Package (Pin Pitch) Part Number TB31345WLG WCSP96 (0.4 mm) TB31224CFG QFP48 (0.8 mm) TB31261AFG Functions Digital mobile and Wireless equipment Cordless phones QFP52 (0.65 mm) TB31262FG QFP52 (0.65 mm) TB32302FG QFP52 (0.65 mm) JTB32303-AS Chip JTB32304-AS Chip ETB32304-AS Wafer Applications Freq. bands: Band I (2-GHz band), Band V/VI(800-MHz band), Band IX (1.7-GHz band) Reduced external parts: Direct conversion transmitter and receiver Low EVM: Tx = 3% (typ.); Rx = 10% (typ.) Fast lock & low noise: Fractional-N PLL + VCO + loop filter Reduced interference: LPF for GSM and CDMA2000 Ultra-small, thin package WCSP96 (4.13 mm x 4.16 mm x 0.6 mm) CT0-compatible PLL, IF detection and compander integrated into a single chip on-chip peripherals Transceiver (FRS/GMRS/PMR) RF IC Transmitter: 66 mA (typ.) (@ +4-dBm output) Receiver: 36 mA (typ.) Power-on reset 2.8 to 3.1 2.0 to 6.0 900-MHz PLL, IF detection and compander integrated into a single chip, on-chip peripherals Low-power radio Power Supply Voltage (V) Features Current consumption Mobile Radio IC Series 2.7 to 5.5 VCO, varicap, LNA, MIX and PA integrated into a single chip 2.0 to 5.0 400-MHz low-power radio, telemeter support, PLL, VCO, LNA, MIX, IF detection and PA integrated into a single chip 2.2 to 4.0 Chip supply PLL, XOUT, LNA, MIX, IF amp, RSSI, Noise detector, Audio amp and TX-buffer into a single chip 2.5 to 4.5 Chip supply PLL, XOUT, LNA, 2nd MIX, IF amp, RSSI, Noise detector, Audio amp and TX-buffer into a single chip 2.5 to 4.5 Wafer supply PLL, XOUT, LNA, 2nd MIX, IF amp, RSSI, Noise detector, Audio amp and TX-buffer into a single chip 2.5 to 4.5 2.2 to 5.5 SSOP30 (0.65 mm) Remote control (AM/FM) 240 kHz to 450 MHz RF amp, MIX, AM/FM demodulator, 2-level comparator, VCC = 2.2 V to 5.5 V, on-chip local x8 multiplier, receiver/transmitter TC31298IXBG FBGA52 (0.5 mm) Bluetooth (RF for chipset) PLL, VCO, LNA, MIX, BPF, IF-amp, Digital detector, ADC, DAC, PA, antenna SW, PLL loopfilter integrated into a single chip TC31299IXBG FBGA52 (0.5 mm) Bluetooth EDR (RF IC chip) Bluetooth EDR-compliant single-chip RF IC with PLL, VCO, LNA, MIX, BPF, IF amp, digital detector, DAC, ADC, PA, antenna switch and PLL loop filter SSOP20 (0.65 mm) Remote control (AM) 240 kHz to 450 MHz RF amp, MIX, AM demodulator, 2-level comparator, on-chip local x8 multiplier 3.0 to 5.5 240 kHz to 450 MHz RF amp, narrow band system, MIX, AM/FM demodulator, 2-level comparator, on-chip local x8 multiplier 2.4 to 5.5 RF operating frequency: 315 MHz on-chip VCO, IF filter, detector 4.0 to 5.5 RF operating frequency: 433.92 MHz on-chip VCO, IF filter, detector 3.6 to 5.5 TA31273FNG TA31275FNG SSOP24 (0.65 mm) TB31370FNG SSOP24 (0.65 mm) TB31371FNG SSOP24 (0.65 mm) Remote control (AM/FM) TB31372FNG * SSOP24 (0.65 mm) Remote control (AM/FM) TB31373FNG * SSOP24 (0.65 mm) Current consumption TA32305FNG Transmitter: 65 mA (typ.) Receiver: 65 mA (typ.) Transmitter: 65 mA (typ.) Receiver: 60 mA (typ.) RF operating frequency: 315 MHz on-chip VCO, IF filter, detector, on-chip high-speed comparator 3.6 to 5.5 RF operating frequency: 433.92 MHz on-chip VCO, IF filter, detector, on-chip high-speed comparator : Dry-packed * The products shown in bold are also manufactured in offshore fabs. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 7 3.0 to 3.6 *: New product 2010/9 SCE0004K Automotive ICs System Power Supplies Characteristics Part Number Package TB9000FG SSOP16 TB9000AFG SSOP16 Functions CPU voltage regulator, watchdog timer CPU voltage regulator, watchdog timer Output Voltage Typ. (V) Output Current Max (mA) 5 10 (Max) (Note) 5 10 (Max) (Note) TB9000CFNG SSOP20 (0.65) CPU voltage regulator, watchdog timer 5 10 (Max) (Note) TB9001FNG SSOP20 (0.65) CPU voltage regulator, watchdog timer 5 5 (Max) (Note) TB9004FNG TB9005FG ** SSOP24 (0.65) SSOP20 CPU dual voltage regulator, watchdog timer CPU voltage regulator, watchdog timer Input Voltage Max (V) Power Dissipation Max (W) 0.6 Low current consumption: 120 A (typ.) Reset on watchdog timeout Reset detection: 4.7 V External transistor required 6 to 16 0.6 Low current consumption: 120 A (typ.) Reset on watchdog timeout Reset detection: 4.2 V External transistor required 6 to 16 45 (1 s) 0.68 Low current consumption: 120 A (typ.) Reset on watchdog timeout Reset detection: 4.7 V External transistor required 6 to 16 45 (1 s) 0.68 Low current consumption: 95 A (typ.) Internal 32 kHz clock External transistor required 6 to 16 6 to 16 6 to 18 45 (1 s) 45 (1 s) 3.4/2.5/1.5 5.0 10 (Max) (Note) 45 (1 s) 0.85 3.4/2.5/1.5 V selectable 2 reset pins Low current consumption: 0 A (VCC1/2: off) (typ.) External transistor required 5 10 (Max) (Note) 45 (1 s) 0.68 Low current consumption: 90 A (typ.) Reset on watchdog timeout Reset detection: 4.7 V or 4.2 V (selectable) External transistor required : Dry-packed Note: An external transistor is required. The gain varies with the transistor. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Actuator Drivers Supply Voltage (V) Remarks **: Under development (DC Motor Drivers) Characteristics Part Number Package TA8050AFG TA8050FG TA8083PG TA8083FG TA8083AFG TB9056FNG Functions Output Voltage Output Current Typ. (V) Max (mA) Input Voltage Max (V) Power Dissipation Max (W) Remarks Supply Voltage (V) HSOP20 H-bridge driver 1500 60 (1 s) 2.0 HSOP20 H-bridge driver 1500 60 (1 s) 2.0 DIP16 H-bridge driver 500 60 (1 s) 1.4 Diagnosis function and standby function 8 to 16 HSOP20 H-bridge driver 500 60 (1 s) 2.0 Diagnosis function and standby function 8 to 16 HSOP20 H-bridge driver 800 60 (1 s) 2.0 Diagnosis function and standby function 8 to 16 0.85 LIN Rev. 1.3 Motor driver: RDSON (H bridge: P-ch + N-ch) = 2.2 (typ.) Potentiometer support 7 to 18 SSOP24 (0.65) LIN-compatible H-bridge driver 300 40 (1 s) Standby function 8 to 16 6 to 16 * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 8 2010/9 SCE0004K (Brushless Motor Drivers) Part Number TB9061FNG TB9065FG TB9066FG TB9067FNG TB9068FG Package ** SSOP24 (0.65) QFP64 (0.65) QFP48 (0.5) SSOP24 (0.65) QFP48 (0.5) Functions Supply Voltage (V) Features 3-phase sensorless motor pre-driver 3-phase, full-wave sensorless drive PWM pulse input control/DC level input control (selectable) Comparator for induced voltage detection Thermal shutdown, overcurrent detection, overvoltage detection 5-V regulated voltage, 5.12-MHz oscillator 3 phase motor pre-driver Charge-pump brushless pre-driver LIN transceiver 5 V power supply for a microcontroller (Requires external PNP transistors.) Watchdog timer, power-on-reset timer 3 ch analog comparator for Hall-effect devices Op-amp/comparator for motor overcurrent detection 7 to 18 3-phase motor driver Motor driver RDSON: P-ch = 1 (typ.), N-ch = 1 (typ.) 120-degree commutation logic LIN 1.3-based transceiver 5-V supply for a microcontroller (external PNP transistor required) Watchdog timer, power-on reset timer Three analog comparators for Hall devices 7 to 18 3-phase motor pre-driver 120-degree commutation logic Pre-drivers for a high-side P-ch FET and a low-side N-h FET Internal PWM drive/external direct drive (selectable) Two options for setting the output duty cycle (pulse input, analog input) Overcurrent detection, thermal shutdown, supply voltage increase, supply voltage decrease Soft start 6 to 18 3-phase motor driver Motor driver RDSON: P-ch = 1 (typ.), N-ch = 1 (typ.) 120-degree commutation logic LIN 1.3-based transceiver 5-V supply for a microcontroller (external PNP transistor required) Watchdog timer, power-on reset timer Three analog comparators for Hall devices 7 to 18 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 9 5.5 to 18 **: Under development 2010/9 SCE0004K Peripheral Equipment LSIs Part Number Package Device Type Output Voltage Typ. (V) Characteristics Output Input Current Voltage Max (mA) Max (V) Power Dissipation Max (W) Remarks Power Supply Voltage (V) TB6066FNG VSOP16 Shock sensor amp (low-noise charge amp) 0.025 1 channel, Window Comparator 2.7 to 5.5 TB6073AFNG VSOP16 Shock sensor amp (low-noise charge amp) 0.0225 2 channel 2.7 to 5.5 0.0195 1 channel, small package, low-noise 2.7 to 5.5 2.3 to 5.5 TB6078AFUG SM8 TB6079AFKG * US16 TB6082FNG * VSOP10 TB6086FKG * US16 Shock sensor amp (low-noise charge amp) Shock sensor amp (Sensor signal processor) 0.022 Two I/O rail-to-rail op amps, reference amp, Window Comparator, small package Shock sensor amp (low-noise charge amp) 0.03 1 channel, Circuitry used to build a notch filter, low-noise 2.3 to 5.5 0.022 1 channel, Circuitry used to build a notch filter, Window Comparator, small package 3.0 to 5.5 Shock sensor amp (Sensor signal processor) TC9384FUG TC9350BFNG SSOP6 High-frequency modulator for optical disk drives VSOP16 USB optical mouse controller 0.026 USB optical mouse controller 4.35 to 5.25 TC93A02FUG/AFUG SSOP6 High-frequency modulator for optical disk drives (2-ch) Designed for dual-wavelength laser diodes 4.5 to 5.5 TC9399FNG VSOP16 Laser diode driver for CD-RW drives 400 Designed for optical disk drives 4.5 to 5.5 4.5 to 5.5 TC93A04FNG/FTG TC93A05FNG TC93A14AFUG TC93A16FTG TC93A24FUG 4.5 to 5.5 VSOP16 /TSSOP16 Laser diode driver for combo drives 400 Designed for dual-wavelength laser diodes VSOP16 Laser diode driver for combo drives 400 Designed for dual-wavelength laser diodes 4.5 to 5.5 SSOP6 High-frequency modulator for optical disk drives (2-ch) Spectrum diffusion type 4.5 to 5.5 Laser diode driver for Blu-ray Disc playback 100 3-terminal 4.5 to 12 High-frequency superimposition for Blu-ray Disc Designed for blue-violet lasers 4.5 to 5.0 VQON24 * Designed for laser diodes SSOP6 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 10 *: New product 2010/9 SCE0004K Other Consumer Product ICs Remote Controller ICs Part Number Package TC9243APG TC9243AFG Description/Use Remote control transmitter suitable for TVs, VCRs and audio equipment P-DIP20-300-2.54A P-SOP20-300-1.27 Operating Voltage (V) Functions and Features Used for transmission, 32 functions controllable through simultaneous multiple key presses 2.0 to 4.0 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Power-On Reset On-chip Debug Function Internal Oscillator (High-Speed) Internal Oscillator (Low-Speed) I/O Port (Pins) Offset Voltage Adjustment Circuit Clock Gear 1 Yes Yes Yes (Note1) Yes Yes Yes Yes Yes 15 2.2 to 3.6 -40 to 85 LQFP48 (7x7 mm) TMP89FH00WBG 16 1024 0.2 1 1 4 1 Yes Yes Yes (Note1) Yes Yes Yes Yes Yes 15 2.2 to 3.6 -40 to 85 WCSP39 (3.8x3.8 mm) RAM (Bytes) ROM (Kbytes) Sensor Sampling Circuit Watchdog Timer 4 8-Bit Timer/Counter (Ch) 1 10-Bit Timer/Counter (Ch) 1 16-Bit Timer/Counter (Ch) 1024 0.2 18-Bit Timer/Counter (Ch) 16 2 TMP89FH00DUG Part Number SIO (Ch) 10-Bit AD Converter (Ch) Power Supply Operating Voltage Temperature (V) (C) I C (Ch) Minimum Instruction Execution Times (s) Mixed-Signal Controllers Package Note1) Supports 1- to 4-axes resistive-bridge-type acceleration sensors. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. CLC (Common Line Communication) ICs Part Number T6B70BFG T6B70BFNG Package SOP16-P-300-1.27 SSOP16-P-225-0.65B Applications Supply Voltage (V) Features Interface IC for boilers Carrier receiver, carrier identification, carrier pseudo-sine wave generator 4.5 to 5.5 Interface IC for boilers Carrier receiver, carrier identification, carrier pseudo-sine wave generator Smaller package version of T6B70BFG 4.5 to 5.5 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 11 2010/9 SCE0004K OVERSEAS SUBSIDIARIES AND AFFILIATES Toshiba America Electronic Components, Inc. * Irvine, Headquarters Tel: (949)623-2900 Fax: (949)474-1330 * Buffalo Grove (Chicago) Tel: (847)484-2400 Fax: (847)541-7287 * Duluth/Atlanta Tel: (770)931-3363 Fax: (770)931-7602 * El Paso Tel: (915)771-8156 * Houston Tel: (713)466-6277 * Marlborough Tel: (508)481-0034 Fax: (508)481-8828 * Parsippany Tel: (973)541-4715 Fax: (973)541-4716 * San Jose Tel: (408)526-2400 Fax: (408)526-2410 * Wixom (Detroit) Tel: (248)347-2607 Fax: (248)347-2602 Toshiba Electronics do Brasil Ltda. Tel: (011)2539-6681 Fax: (011)2539-6675 (As of June 01, 2010) Toshiba Electronics Europe GmbH Toshiba Electronics Asia, Ltd. * Dusseldorf Head Office * Hong Kong Head Office Tel: (0211)5296-0 Fax: (0211)5296-400 Tel: 2375-6111 Fax: 2375-0969 * France Branch * Beijing Office Tel: (1)47282828 Fax: (1)42046491 Tel: (010)6590-8796 Fax: (010)6590-8791 * Italy Branch * Chengdu Office Tel: (039)68701 Fax: (039)6870205 Tel: (028)8675-1773 Fax: (028)8675-1065 * Spain Branch * Qingdao Office Tel: (91)660-6798 Fax: (91)660-6799 Tel: (532)8579-3328 Fax: (532)8579-3329 Toshiba Electronics Shenzhen Co., Ltd. * U.K. Branch Tel: (1252)5300 Fax: (1252)53-0250 Tel: (0755)2399-6897 Fax: (0755)2399-5573 Toshiba Electronics (Shanghai) Co., Ltd. * Sweden Branch Tel: (8)704-0900 Fax: (8)80-8459 * Shanghai Head Office Toshiba Electronics Asia (Singapore) Pte. Ltd. Tel: (6278)5252 Fax: (6271)5155 Tel: (021)6841-0666 Fax: (021)6841-5002 * Hangzhou Office Toshiba Electronics Service (Thailand) Co., Ltd. Tel: (02)501-1635 Fax: (02)501-1638 Tel: (0571)8717-5004 Fax: (0571)8717-5013 * Nanjing Office Toshiba Electronics Trading (Malaysia) Sdn. Bhd. Tel: (025)8689-0070 Fax: (025)8689-0125 Toshiba Electronics (Dalian) Co., Ltd. * Kuala Lumpur Head Office Tel: (03)5631-6311 Fax: (03)5631-6307 Tel: (0411)8368-6882 Fax: (0411)8369-0822 Tsurong Xiamen Xiangyu Trading Co., Ltd. * Penang Office Tel: (04)226-8523 Fax: (04)226-8515 Tel: (0592)226-1398 Fax: (0592)226-1399 Toshiba India Private Ltd. Toshiba Electronics Korea Corporation Tel: (011)2331-8422 Fax: (011)2371-4603 * Seoul Head Office Tel: (02)3484-4334 Fax: (02)3484-4302 * Daegu Office Tel: (053)428-7610 Fax: (053)428-7617 Toshiba Electronics Taiwan Corporation * Taipei Head Office Tel: (02)2508-9988 Fax: (02)2508-9999 Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. Product may include products using GaAs (Gallium Arsenide). GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. Product may include products subject to foreign exchange and foreign trade control laws. Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. In addition to the above, the following are applicable only to development tools. Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Use the Product in a way which minimizes risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. For using the Product, customers must also refer to and comply with the latest versions of all relevant TOSHIBA information, including without limitation, this document, the instruction manual, the specifications, the data sheets for Product. Product is provided solely for the purpose of performing the functional evaluation of a semiconductor product. Please do not use Product for any other purpose, including without limitation, evaluation in high or low temperature or humidity, and verification of reliability. Do not incorporate Product into your products or system. Products are for your own use and not for sale, lease or other transfer. 2010 Semiconductor Company Website: http://www.semicon.toshiba.co.jp/eng 12 2010/9 SCE0004K