SEMICONDUCTOR GENERAL CATALOG
ASSPs
Audio & Video Equipment ICs
Commun ications Equipment ICs
Automotive ICs
Peripheral Equipment LSIs
Other Consumer Product ICs
1 2010/9 SCE0004K
Audio & Video Equipment ICs
TV Set ICs (Audio Output ICs)
Part Number Package Use Functions and Features Operating Supply
Voltage (V)
TB2922HQ
P-HZIP12-1.78B Sound output power: 20 W x 2, MOS output stage; Class AB, mute, standby, various protection circuit s
9 to 26
TB2924AFG
P-HSOP36-450-0.65 Sound output power: 20 W x 2, PWM analog-input Class-D amp 11 to 20 (18)
TB2964FTG
P-QFN48-0707-0.50
Audio output ICs
Sound output power: 15 W x 2, I2S signal-input Class-D amp 9 to 18
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
TV Tuning & Channel Deco der ICs (PIF, SIF ICs)
Part N umb e r Package Use Functions and Features Operating Supply
Voltage (V)
TB1338FNG/FTG
P-SSOP24-300-0.65A
QFN36-P-0606-0.50 Multi-standard
PLL PIF/SIF
D/K, I, B/G, M, L, L’, multi-standard PIF/SIF, FM radio receiver support,
PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound,
I2C bus 4.75 to 5.25
TB1350FNG/FTG
P-SSOP24-300-0.65A
QFN36-P-0606-0.50 D/K, I, B /G , M,
PLL PIF/SIF D/K, I, B/G, M, FM radio receiver support, PIF VCO, audio trap, SIF filter,
general-purpose SW port, split-c arrier and intercarrier s ound, I2C bus 4.75 to 5.25
TB1351FTG
QFN36-P-0606-0.50 Multi-standard
PLL PIF/SIF
D/K, I, B/G, M, L, L’, multi-standard PIF/SIF, FM radio receiver support,
PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound,
I2C bus 4.75 to 5.25
TB1354FTG
QFN36-P-0606-0.50 Multi-standard
PLL PIF/SIF
D/K, I, B/G, M, L, L’, multi-standard PIF/SIF, FM radio receiver support,
PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound,
I2C bus 4.75 to 5.25
TB1356FTG
QFN36-P-0606-0.50 Multi-standard
PLL PIF/SIF
D/K, I, B/G, M, L, L’, multi-standard PIF/SIF, FM radio receiver support,
PIF VCO, audio trap, SIF filter, general-purpose SW port, split-carrier and intercarrier sound,
I2C bus, TOP adjustment pin, analog AFT output 4.75 to 5.25
: Dry-packed **: Under development
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(Channel Decoder ICs)
Part Number Package Use Functions and Features Operating Supply
Voltage (V)
TC90532XBG
P-FBGA177-1313-0.80C4
8PSK demodulator
OFDM demodu lator
Digital BS broadcasting, digital CS broadcasting (ISDB-S),
8PSK, QPSK demodulation, error correction,
digital terrestrial broadcasting (ISDB-T),
OFDM demodulation, error correction,
A/D converter, memory
3.0 to 3.6
1.1 to 1.3
TC90522XBG
P-FBGA177-1313-0.80C4
8PSK demodulator
OFDM demodu lator
(Two channels each)
Digital BS broadcasting, digital CS broadcasting (ISDB-S),
8PSK, QPSK demodulation, error correction,
digital terrestrial broadcasting (ISDB-T),
OFDM demodulation, error correction,
A/D converter, memory
3.0 to 3.6
1.1 to 1.3
TC90517WBG
S-WFBGA76-040A01
TC90517FG
P-LQFP64-1010-0.50E OFDM demodulator Digital terrestrial broadcasting (ISDB-T),
OFDM demodulation, error correction,
A/D converter, memory
3.0 to 3.6
2.3 to 2.7
1.1 to 1.3
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
2 2010/9 SCE0004K
Audio ICs (AM/FM Receiver ICs) Intended Use Functions
Part Number Package Description Car
Audio
General
Audio Other F/E IF Stereo
Demodu-
lation
Audio
processor Functions and Features Operating
Voltage
(V)
TB2132FNG
P-SSOP30-300-0.65 Single-
chip AM/FM stereo tuner
with PLL
TV bands, VCO for MPX,
compliant with new FCC standards 1.8 to 5.5
TB2178FG
P-LQFP48-070 7-0.50 Front End IC for Digital IF
sampling tuner system
AM/FM front-end,
IF amplifier,
DAC ou tputs for RF synchron i za ti o n 8.3
TC94A90FG
P-LQFP216-2424-0.40A
IF sampling
AM/FM digital processing tuner
and Audio Digital Signal
Processor
IF-sampling ADC x 2 ch
Multipath noise cancellation with dual tuners
Multi-bit DA converter x 6 ch
Output ports for IBOC decoders
On-chip audio processor
3.3/1.5
TC94B01FG **
P-LQFP64-101 0-0.50 IF sampling
AM/FM digital processing tuner
IF-sampling ADC x 1 ch
Multipath noise cancellation
Multi-bit DA converter x 2 ch
Output ports for IBOC decoders
3.3/1.5
: Dry-packed **: Under development
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(Pow er Am p ICs) Intended Use Output Power (POUT)
Part Number Package Car Stereos Cassette
Tape
Recorders
TV/Home
Stereos
Recom-
mended
VCC RL = 4
RL = 8
Functions and Features
Operating
Voltage
(V)
TB2901HQ
P-HZIP25-1.00F 13.2 V
25 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, high-side switch,
Maximum power: 47 W x 4 ch, RL = 2 operation guaranteed 9 to 18
TB2902HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, mute, Command-controlled standby
mode,
Maximum power: 41 W x 4 ch, RL = 2 operation guaranteed
I2C-bus-controled self-diagnosis
9 to 18
TB2903HQ
P-HZIP25-1.00F
13.2 V
25 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 47 W x 4 ch 9 to 18
TB2904HQ
P-HZIP25-1.00F
13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 43 W x 4 ch, speaker burnout prevention 9 to 18
TB2905HQ
P-HZIP25-1.00F 13.2 V
25 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute,
Class-KB efficiency, Maximum power: 47 W x 4 ch, self-diagnosis 9 to 18
TB2906HQ P-HZIP25-1.00F
13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 43 W x 4 ch, 34dB voltage gain,
Speaker burnout prevention 9 to 18
TB2912HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, mute, Command-controlled standby
mode,
Maximum power: 41 W x 4 ch, RL = 2 operation guaranteed
I2C-bus-controled self-diagnosis
9 to 18
TB2913HQ P-HZIP25-1.00F 13.2 V
25 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, clipping detector,
Maximum power: 47 W x 4 ch 9 to 18
TB2915HQ
P-HZIP25-1.00F 13.2 V
24 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute,
Maximum power: 49 W x 4 ch, Class-KB efficiency,
DC offset and short-circuit detection, Cross-wiring detection,
RL = 2 operation guaranteed
8 to 18
TB2921AHQ
P-HZIP25-1.00F 13.2 V
25 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, high-side switch,
Maximum power: 51 W x 4 ch, RL = 2 operation guaranteed 8 to 18
TB2922HQ
P-HZIP12-1.78B 18 V 37 W x 2
22 W x 2 MOS amplifier for 2 BTL channels, standby switch, mute 9 to 26
TB2923AHQ
P-HZIP25-1.00F 13.2 V
25 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 51 W x 4 ch, RL = 2 operation guaranteed 8 to 18
TB2924AFG
HSOP36-P-450-0.65 15 V 19 . 5 W x 2
12 W x 2 Class D amplifier for 2 BTL channels, standby switch, mute,
efficiency = 88% 11 to 18 (20)
TB2926HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 49 W x 4 ch 8 to 18
TB2929HQ
P-HZIP25-1.00F 13.2 V
21 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 45 W x 4 ch, AUX amp 8 to 18
TB2932AHQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, mute, Command-controlled standby
mode, Hardware-standby mode, RL = 2 operation guaranteed,
I2C-bus-controled self-diagnosis, Selectable voltage gain (26/12 dB) 8 to 18
TB2932HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplif ier for 4 BTL channels, mute,
Command-controlled standby mode, RL = 2 operation guaran teed
I2C-bus-controled self-diagnosis, Selectable voltage gain (26/12 dB) 8 to 18
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
3 2010/9 SCE0004K
(Power Amp ICs) (Continued) Intended Use Output Power (POUT)
Part Number Package Car Stereos Cassette
Tape
Recorders
TV/Home
Stereos
Recom-
mended
VCC RL = 4
RL = 8
Functions and Features
Operating
Voltage
(V)
TB2933HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplif ier for 4 BTL channels, mute,
Command-controlled standby mode, RL = 2 operation guaran teed
I2C-bus-controled self-diagnosis, Selectable voltage gain (34/20 dB) 8 to 18
TB2934HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, mute, Command-controlled standby
mode,
Maximum power: 41 W x 4 ch, RL = 2 operation guaranteed
I2C-bus-controled self-diagnosis, 34dB voltage gain
9 to 18
TB2936HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 49 W x 4 ch, 34dB voltage gain 8 to 18
TB2939HQ
P-HZIP25-1.00F 13.2 V
24 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 45 W x 4 ch, self-diagnosis 8 to 18
TB2946HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, offset detection,
Maximum power: 49 W x 4 ch, RL = 2 operation guaranteed 8 to 18
TB2956HQ
P-HZIP25-1.00F 13.2 V
23 W x 4
MOS amplifier for 4 BTL channels, standby switch, mute, clipping detector
Maximum power: 45 W x 4 ch 8 to 18
TB2964FTG
QFN48-P-0707-0.50
15 V 15 W x 2
10 W x 2 MOS amplifier for 2 BTL channels, Muting control (soft mute, forced mute),
Oversampling digital filter with an asynchronous sampling rate converter,
De-emphasis, Digital att enuator, Protection circuits 9 to 18
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(Headphone Amp ICs) Intended Use
Part Number Package
Headphone
Stereos
Digital
Portable
Stereos
Mobile
Phones
Output Power Functions and Features Operating Voltage
(V)
TB2173FTG
P-VQON44-P-0606-0.4
9.5 mW (+B = 1.2 V, 16 )
Support for 2 sources, electric v olume, bass boost with AGC,
OCL/output capacitor coupling, GV = 8dB/24dB, beep, standby switch,
mute, port ex pansion ci rcuit
+B = 0.9 t o 4. 5
VDD = 1.8 to 4.5
VCC = 1.8 to 4.5
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(Digita l Tuni ng System s (DTS) ) Features
Part Number Package System
No. Remarks Crystal
Oscillator
ROM Size RAM Size Display Format I/O Ports Operating
Voltage (V)
TC9324FG
P-QFP100-1420-0.65Q
DTS-20 Su it able f or car ster eos 4.5 MHz/
75 kHz 16 bits x 16K 4 bits x 4096 LCD drive: 1/4, 1/3 & 1/2
duty,
1/2 & 1/3 bias
IN: 35 lines
OUT: 13 lines
I/O: 40 lines 4.5 to 5.5
TC9318AFAG
P-LQFP64-1010-0.50E
Low-voltage operation
Single chip
Suitable for portables
75 kHz 16 bits x 4K 4 bits x 256 LCD drive: 1/3 duty,
1/2 bias
IN: 11 lines
OUT: 33 lines
I/O: 10 lines 1.8 to 3.6
TC9327BFG
P-QFP80-1212-0.50F Low-voltage operation
Single chip
Suitable for portables
75 kHz 16 bits x 7K 4 bits x 256 LCD drive: 1/4 duty,
1/2 bias
IN: 9 li n es
OUT: 33 lines
I/O: 24 lines 1.8 to 3.6
TC9328AFG
P-QFP80-1212-0.50F Low-voltage operation
Single chip
Suitable for portables
75 kHz 16 bits x 8K 4 bits x 512 LCD drive: 1/4 duty,
1/2 bias
IN: 8 li n es
OUT: 21 lines
I/O: 36 lines 0.9 to 1.8
TC9329AFAG
P-LQFP64-1010-0.50A
P-TFP64-1010-0.50C
Low-voltage operation
Single chip
Suitable for portables
75 kHz 16 bits x 4K 4 bits x 256 LCD drive: 1/4 duty,
1/2 bias
IN: 4 li n es
OUT: 16 lines
I/O: 28 lines 0.9 to 1.8
TC9349AFG
P-LQFP64-1010-0.50E
DTS-21
Low-voltage operation
Single chip
Suitable for portables
75 kHz 16 bits x 8K 4 bits x 512 LCD drive: 1/4 duty,
1/2 & 1/3 bias
IN: 4 li n es
OUT: 2 lines
I/O: 45 lines 0.9 to 1.8
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
4 2010/9 SCE0004K
(Analog Switches) Operating Voltage (V)
Part Number Package Features VDD VSS
TC9162CNG/CFG
6.0 to 17.0 17.0 to 6.0
TC9163CNG/CFG
6.0 to 17.0 17.0 to 6.0
TC9164CNG/CFG
P-SDIP28-400-1.78
P-SOP28-450-1.27B
High breakdown voltage, analog function switch array
6.0 to 17.0 17.0 to 6.0
TC9273CNG/CFG
P-SDIP28-400-1.78
P-SOP28-450-1.27B
6.0 to 17.0 17.0 to 6.0
TC9274CNG/CFG P-SDIP42-600-1.78
P-QFP44-1414-0.80K
High breakdown voltage, analog function switch array
semi-customization available 6.0 to 17.0 17.0 to 6.0
TC94A46CNG/CFG
P-SDIP42-600-1.78
P-QFP80-1420-0.80M
High breakdown voltage, analog function switch array
14-circuit, 3-contact analog switch x 2 6.0 to 17.0 17.0 to 6.0
TC94A88FG * P-QFP80-1420-0.80M
High breakdown voltage, analog function switch array
13-circuit, 4-contact analog switch x 2 6.0 to 17.0 17.0 to 6.0
: Dry-packed *: New product
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(Ele ctronic V ol ume Con trol ICs) Operating Voltage (V)
Part Number Package Classification Features VDD VSS
TC9235APG/AFG
Up/down-type electronic volume control 4.5 to 12.0
TC9260APG/AFG
P-DIP16-300-2.54A
P-SOP16-300-1.27
Volume control Serial-data-controlled electronic volume control 4.5 to 12.0
TC9459BNG/BFG
P-SDIP28-400-1.78
P-SOP28-450-1.27B
High breakdown voltage, serial-data-controlled electronic volume control + loudness control 6.0 to 17.0
17.0 to 6.0
TC9482BNG/BFG
P-SDIP28-400-1.78
P-SOP28-450-1.27B
High breakdown voltage, 6-channel serial-data-controlled electronic volume control 6.0 to 17.0
17.0 to 6.0
TC94A32BFG P-SOP28-450-1.27B
High breakdown voltage, serial-data-controlled electronic volume control with trim volume 6.0 to 17.0
17.0 to 6.0
TC94A27BUG P-LQFP44-1010-0.80A
4-channel serial-data-controlled electronic volume control with trim volume 6.0 to 17.0
17.0 to 6.0
TC94A81UG P-LQFP44-1010-0.80A
High-breakdown-voltage
volume control
High breakdown voltage, 2-channel serial-data-controlled electronic volume control with trim
volume, 4-input selector and zero crossing detection circuit 6.0 to 17.0
17.0 to 6.0
TC9422ANG/AFG
Volume, 2-band tone control, 4-input selector 6.0 to 12.0
TC9498ANG/AFG * 6-channel serial-data-controlled electronic volume control with trim volume settings
(single power supply) 4.5 to 14.0
TC9499ANG/AFG
P-SDIP28-400-1.78
P-SOP28-450-1.27B
Single-chip
volume control 6-channel serial-data-controlled electronic volume control with trim volume settings
(dual power supplies) 4.5 to 7.0 7.0 to 4.5
: Dry-packed *: New product
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(PLLs, Prescalers)
Part Number Package Classification Features Operating Voltage (V)
TC9256APG 4.5 to 5.5
TC9256AFG P-DIP16-300-2.54A
P-SOP16 -300-1.27
4.5 to 5.5
TC9257APG 4.5 to 5.5
TC9257AFG P-DIP20-300-2.54A
P-SOP20 -300-1.27
PLL High-speed PLL incorporating a DTS prescaler
4.5 to 5.5
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
5 2010/9 SCE0004K
(Compact Disc Player ICs )
Part Number Package Classification Features Operating
Voltage (V)
TC94A15FG
P-LQFP100-1414-0.50C
Single-chip process or
Sync separation, EFM demodulation,
error detection/correction, error-corrected output,
microcontroller interface, search control, digital equalizer,
text data decoding, variable-speed playback,
x8 oversampling digital filter, 1-bit DA converter,
Integrated head amp
x4 play back mode
for CD- DA /R CD-RX syste m 3.3/5
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(CD/MP 3 Playe r IC)
Part Number Package Classification Features Operating
Voltage (V)
TC94A92FG
P-LQFP80-1212-0.50F
Single-chip process or
CD-DA/R/RW: x2 playback, low power consumption, 1-Mbit SRAM (128 Kwords x 8 bits), standby mode
Supports various compressed audio formats: MP3, WMA, AAC
RF amp, CD digital servo, 8fs digital filter
Multi-bit DA converter
3.3/1.5
: Dry-packed
The products shown in italic are manufactured in offshore fabs.
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
(Digital Signal Processor for Digital Amp System Applications)
Part Number Package Classification Features Operating
Voltage (V)
TC94A34FG
P-LQFP64-1010-0.50E
Audio digital signal
processor
Low power consumption, 1-Mbit SRAM (128 Kwords x 8 bits)
Supports various compressed audio formats: MP3, WMA, AAC
Program ROM (20 K), program RAM (4 K), st andby mode 3.3/1.5
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
6 2010/9 SCE0004K
Communi cations Equipm ent ICs
Mobile Radio IC Series (Bipolar/Bi-CM OS ICs)
Part Number Package
(Pin Pitch) Functions Applications Features Power
Supply
Voltage (V)
TB31345WLG WCSP96 (0.4 mm) Digital mobile and
Wireless equipment
Freq. bands: Band I (2-GHz band), Band V/VI(800-MHz band),
Band IX (1.7-GHz band)
Reduced external parts: Direct c onversion transmitt er and receiver
Low EVM: Tx = 3% (typ.); Rx = 10% (typ.)
Fast lock & low noise: Fractional-N PLL + VCO + loop filter
Reduced interference: LPF for GSM and CDMA2000
Ultra-small, thin package WCSP96 (4.13 mm x 4.16 mm x 0.6 mm)
Current consumption
Transmitter: 66 mA (typ.)
(@ +4-dBm output)
Receiver: 36 mA (typ.) 2.8 to 3.1
TB31224CFG QFP48 (0.8 mm) CT0-compatible PLL, IF detection and
compander integrated into a single chip
on-chip peripherals
Power-on reset 2.0 to 6.0
TB31261AFG
QFP52 (0.65 mm) 900-MHz PLL, IF detection and compander integrated into a single chip, 2.7 to 5.5
TB31262FG
QFP52 (0.65 mm)
Cordless phones
on-chip peripherals VCO, varicap, LNA, MIX and PA integrated into a
single chip 2.0 to 5.0
TB32302FG
QFP52 (0.65 mm) Low-power radio 400-MHz low-power radio, telemeter support, PLL, VCO, LNA, MIX, IF detection and PA integrated
into a single chip 2.2 to 4.0
JTB32303-AS Chip Chip supply
PLL, XOUT, LNA, MIX, IF amp, RSSI, Noise detector, Audio amp and TX-buffer into a single chip 2.5 to 4.5
JTB32304-AS Chip Chip supply
PLL, XOUT, LNA, 2nd MIX, IF amp, RSSI, Noise detector, Audio amp and TX-buffer into a single chip 2.5 to 4.5
ETB32304-AS Wafer
Transceiver
(FRS/GMRS/PMR) Wafer supply
PLL, XOUT, LNA, 2nd MIX, IF amp, RSSI, Noise detector, Audio amp and TX-buffer into a single chip 2.5 to 4.5
TA32305FNG
SSOP30 (0.65 mm) Remote control (AM/F M) 240 kHz to 450 MHz RF amp, MIX, AM/FM demodulator, 2-level comparator,
VCC = 2.2 V to 5.5 V, on-chip local x8 multiplier, receiver/ tr ansmitter 2.2 to 5.5
TC31298IXBG
FBGA52 (0.5 mm) Bluetooth
(RF for chipset) PLL, VCO, LNA, MIX, BPF, IF-amp, Digital detector, ADC, DAC, PA,
antenna SW, PLL loopfilter integrated into a single chip Transm i tter: 65 mA (typ.)
Receiver: 65 mA (typ.)
TC31299IXBG
FBGA52 (0.5 mm) Bluetooth EDR
(RF IC chip)
Bluetooth EDR-compliant single-chip RF IC with PLL, VCO, LNA,
MIX, BPF, IF amp, digital detector, DAC, ADC, PA, antenna switch
and PLL loop filter
Current
consumption
Transm i tter: 65 mA (typ.)
Receiver: 60 mA (typ.)
3.0 to 3.6
TA31273FNG SSOP20 (0.65 mm) Remot e con trol (A M ) 240 kHz to 450 MHz RF amp, MIX, AM demodulator, 2-level comparator,
on-chip local x8 multiplier 3.0 to 5.5
TA31275FNG
SSOP24 (0.65 mm) 240 kHz to 450 MHz RF amp, narrow band system, MIX, AM/FM demodulator, 2-level comparator,
on-chip local x8 multiplier 2.4 to 5.5
TB31370FNG
SSOP24 (0.65 mm) RF operating frequency: 315 MHz
on-chip VCO, IF filter, detector 4.0 to 5.5
TB31371FNG
SSOP24 (0.65 mm)
Remote control (AM/FM)
RF operating frequency: 433.92 MHz
on-chip VCO, IF filter, detector 3.6 to 5.5
TB31372FNG *
SSOP24 (0.65 mm) RF operating frequency: 315 MHz
on-chip VCO, IF filter, detector, on-chip high-speed comparator
TB31373FNG *
SSOP24 (0.65 mm)
RF IC
Remote control (AM/FM) RF operating frequency: 433.92 MHz
on-chip VCO, IF filter, detector, on-chip high-speed comparator
3.6 to 5.5
: Dry-packed *: New product
The products shown in bold are also manufactured in offshore fabs.
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
7 2010/9 SCE0004K
Automoti ve ICs
System Power Supplies Characteristics
Part Number Package Functions Output
Voltage
Typ. (V)
Output
Current
Max (mA)
Input
Voltage
Max (V)
Power
Dissipation
Max (W)
Remarks Supply
Voltage
(V)
TB9000FG SSOP16 CPU voltage regulator, watchdog timer 5 10
(Max) (Note)
45 (1 s) 0.6
Low current consumption: 120 µA (typ.)
Reset on watchdog timeout
Reset detection: 4.7 V
External transistor required
6 to 16
TB9000AFG SSOP16 CPU voltage regulator, watchdog timer 5 10
(Max) (Note)
45 (1 s) 0.6
Low current consumption: 120 µA (typ.)
Reset on watchdog timeout
Reset detection: 4.2 V
External transistor required
6 to 16
TB9000CFNG
SSOP20 (0.65)
CPU voltage regulator, watchdog timer 5 10
(Max) (Note)
45 (1 s) 0.68
Low current consumption: 120 µA (typ.)
Reset on watchdog timeout
Reset detection: 4.7 V
External transistor required
6 to 16
TB9001FNG SSOP20 (0.65)
CPU voltage regulator, watchdog timer 5 5
(Max) (Note)
45 (1 s) 0.68 Low current consumption: 95 µA (typ.)
Internal 32 kHz clock
External transistor required 6 to 16
TB9004FNG
SSOP24 (0.65)
CPU dual voltage regulator, watchdog timer
3.4/2.5/1.5
5.0 10
(Max) (Note)
45 (1 s) 0.85
3. 4/2 .5/1.5 V s electab le
2 reset pins
Low current consumption:
0 µA (VCC1/2: off) (ty p.)
External transistor required
6 to 16
TB9005FG **
SSOP20 CPU voltage regulator, watchdog timer 5 10
(Max) (Note)
45 (1 s) 0.68
Low current consumption: 90 µA (typ.)
Reset on watchdog timeout
Reset detection: 4.7 V or 4.2 V (selectable)
External transistor required
6 to 18
: Dry-packed **: Under development
Note: An external transistor is required. The gain varies with the transistor.
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
Act uator Drivers (DC Motor Dri vers) Characteristics
Part Number Package Functions Output Voltage
Typ. (V) Output Current
Max (mA) Input Voltage
Max (V) Power Dissipation
Max (W) Remarks Supply Voltage
(V)
TA8050AFG HSOP20 H-bridge driver 1500 60 (1 s) 2.0 Standby function 8 to 16
TA8050FG HSOP20 H-bridge driver 1500 60 (1 s) 2.0 6 to 16
TA8083PG DIP16 H-bridge driver 500 60 (1 s) 1.4 Diagnosis function and standby function
8 to 16
TA8083FG HSOP20 H-bridge driver 500 60 (1 s) 2.0 Diagnosis function and standby function
8 to 16
TA8083AFG HSOP20 H-bridge driver 800 60 (1 s) 2.0 Diagnosis function and standby function
8 to 16
TB9056FNG
SSOP24 (0.65)
LIN-compatible H-bridge
driver 300 40 (1 s) 0.85
LIN Re v. 1. 3
Motor driver: RDSON (H bridge: P-ch +
N-ch) = 2.2 (ty p . )
Potentiometer support
7 to 18
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
8 2010/9 SCE0004K
(Brushless Motor Drivers )
Part Number Package Functions Features Supply Voltage
(V)
TB9061FNG
SSOP24 (0.65) 3-phase sensorless motor pre-driver
3-phase, full-wave sensorless drive
PWM pulse input contr ol/DC leve l in put c ont rol ( selectable)
Comparator for induced voltage detection
Thermal shutdown, overcurrent detection, overvoltage detection
5-V regulated voltage, 5.12-MHz oscillator
5.5 to 18
TB9065FG
QFP 64 (0. 65) 3 phas e motor pre-dri ver
Charge-pump brushless pre-driver
LIN transceiver
5 V power supply for a microcontroller (Requires external PNP transistors.)
Watchdog timer, power-on-reset timer
3 ch analog comparator for Hall-effect devices
Op-amp/comparator for motor overcurrent detection
7 to 18
TB9066FG
QFP48 (0.5) 3-phase motor driver
Motor driver RDSON: P-ch = 1 (typ.), N-ch = 1 (t y p.)
120-degree commut ation logic
LIN 1. 3-based t ransc eiver
5-V supply for a microcontroller (external PNP transistor required)
Watchdog timer, power-on reset timer
Three analog comparators for Hall devices
7 to 18
TB9067FNG
SSOP24 (0.65) 3-phase motor pre-driver
120-degree commut ation logic
Pre-drivers for a high-side P-ch FET and a low-side N-h FET
Internal PWM drive/external direct drive (selectable)
Two options for setting the output duty cycle (pulse input, analog input)
Overcurrent detection, thermal shutdown, supply voltage increase, supply voltage decrease
Soft sta r t
6 to 18
TB9068FG **
QFP48 (0.5) 3-phase motor driver
Motor driver RDSON: P-ch = 1 (typ.), N-ch = 1 (t y p.)
120-degree commut ation logic
LIN 1. 3-based t ransc eiver
5-V supply for a microcontroller (external PNP transistor required)
Watchdog timer, power-on reset timer
Three analog comparators for Hall devices
7 to 18
: Dry-packed **: Under development
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
9 2010/9 SCE0004K
Periph era l Equipment LSI s
Characteristics
Part Number Package Device Type Output
Voltage
Typ. (V)
Output
Current
Max (mA)
Input
Voltage
Max (V)
Power
Dissipation
Max (W)
Remarks Power
Supply
Voltage (V)
TB6066FNG VSOP16 Shock sensor amp (low-noise charge amp) 0.025
1 channel,
Window Comparator 2.7 to 5.5
TB6073AFNG VSOP16 Shock sensor amp (low-noise charge amp) 0.0225 2 channel 2.7 to 5.5
TB6078AFUG SM8 Shock sensor amp (low-noise charge amp) 0.0195
1 channel,
small pa ckage, low -noise 2.7 to 5.5
TB6079AFKG * US16 Shock sensor amp
(Sensor signal processor) 0.022
Two I/O rail-to-rail op amps,
reference amp,
Window Comparator,
small pa ckage
2.3 to 5.5
TB6082FNG * VSOP10 Shock sensor amp (low-noise charge amp) 0.03
1 channel,
Circuitry used to build a notch
filter, low-noise 2.3 to 5.5
TB6086FKG *
US16 Shock sensor amp
(Sensor signal processor) 0.022
1 channel,
Circuitry used to build a notch
filter, Window Comparator,
small pa ckage
3.0 to 5.5
TC9384FUG SSOP6 High-frequency modulator for optical disk drives Designed for laser diodes 4.5 to 5.5
TC9350BFNG VSOP16 USB optical mouse controller 0.026 USB optical mouse controller 4.35 to 5.25
TC93A02FUG/AFUG
SSOP6 High-frequency modulator for optical disk drives (2-ch)
Designed for dual-wavelength
laser diodes 4.5 to 5.5
TC9399FNG VSOP16 Laser diode driver for CD-RW drives 400 Designed for optical disk drives 4.5 to 5.5
TC93A04FNG/FTG
VSOP16
/TSSOP16 Laser diode driver for combo drives 400 Designed for dual-wavelength
laser diodes 4.5 to 5.5
TC93A05FNG VSOP16 Laser diode driver for combo drives 400 Designed for dual-wavelength
laser diodes 4.5 to 5.5
TC93A14AFUG SSOP6 High-frequency modulator for optical disk drives (2-ch)
Spectrum diffusion type 4.5 to 5.5
TC93A16FTG VQON24
Laser diode driver for Blu-ray Disc playback 100 3-terminal 4.5 to 12
TC93A24FUG * SSOP6 High-frequency superimposition for Blu-ray Disc Designed for blue-violet lasers 4.5 to 5.0
: Dry-packed *: New product
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
10 2010/9 SCE0004K
Other Consumer Product ICs
Remote Controller ICs
Part N umb e r Package Description/Use Functions and Features Operating
Voltage (V)
TC9243APG
TC9243AFG P-DIP20-300-2.54A
P-SOP20-300-1.27
Remote control transmitter suitable
for TVs, VCRs and audio equipment Us ed for transmission, 32 functions controllable through simultaneous multiple key
presses 2.0 to 4.0
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
Mixed -Signal Controllers
Part N umb e r
ROM (Kbytes)
RAM (Bytes)
Minimum Instruction Execution Times (µs)
SIO (Ch)
I2C (Ch)
10-Bit AD Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
Watchdog Timer
Clock Gear
Power-On Reset
Sensor Sampling Circuit
Offset Voltage Adjustment Circuit
On-chip Debug Function
Internal Oscillator (High-Speed)
Internal Oscillator (Low-Speed)
I/O Port (Pins)
Power Supply
Voltage
(V)
Operating
Temperature
(°C) Package
TMP89FH00DUG 16
1024
0.2
1 1 4 1 Yes
Yes
Yes
(Note1)
Yes
Yes
Yes
Yes
Yes
15
2.2 to 3.6 40 to 85 LQFP48
(7×7 mm)
TMP89FH00WBG 16
1024
0.2
1 1 4 1 Yes
Yes
Yes
(Note1)
Yes
Yes
Yes
Yes
Yes
15
2.2 to 3.6 40 to 85 WCSP39
(3.8× 3 .8 mm)
Note1) Supports 1- to 4-axes resisti v e-bridge-type acceleration sensors.
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
CLC (Common Line Communic ation) ICs
Part N umb e r Package Applications Features Supply Voltage
(V)
T6B70BFG
SOP16-P-300-1.27 Interface IC for boilers Carrier receiv er, carrier identific at ion, carrier ps eudo-sine wave generator 4.5 to 5.5
T6B70BFNG SSOP16-P-225-0.65B
Interface IC for boilers Carrier receiver, carrier identific ation, carrier pseudo-sine wave generator
Smaller package version of T6B70BFG 4.5 to 5.5
: Dry-packed
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
11 2010/9 SCE0004K
Website: http://www.semicon.toshiba.co.jp/eng
Semiconductor Company
OVERSEAS SUBSIDIARIES AND AFFILIATES
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware,
software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is
permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and
for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could
cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or
incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without
limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor
Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the
applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c)
validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics
appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily
high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact
(“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment
used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and
escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual
property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by
estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM
EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR
INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA,
AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Product may include products using GaAs (Gallium Arsenide). GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do
not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use,
stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology
may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related
software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Product may include products subject to foreign exchange and foreign trade control laws.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all
applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for
damages or losses occurring as a result of noncompliance with applicable laws and regulations.
In addition to the above, the following are applicable only to development tools.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Use the Product in a way which minimizes risk and avoid situations
in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. For using the Product, customers
must also refer to and comply with the latest versions of all relevant TOSHIBA information, including without limitation, this document, the instruction manual, the specifications, the
data sheets for Product.
Product is provided solely for the purpose of performing the functional evaluation of a semiconductor product. Please do not use Product for any other purpose, including without
limitation, evaluation in high or low temperature or humidity, and verification of reliability.
Do not incorporate Product into your products or system. Products are for your own use and not for sale, lease or other transfer.
Toshiba America
Electronic Components, Inc.
• Irvine, Headquarters
Tel: (949)623-2900 Fax: (949)474-1330
• Buffalo Grove (Chicago)
Tel: (847)484-2400 Fax: (847)541-7287
• Duluth/Atlanta
Tel: (770)931-3363 Fax: (770)931-7602
• El Paso
Tel: (915)771-8156
Houston
Tel: (713)466-6277
Marlborough
Tel: (508)481-0034 Fax: (508)481-8828
Parsippany
Tel: (973)541-4715 Fax: (973)541-4716
San Jose
Tel: (408)526-2400 Fax: (408)526-2410
• Wixom (Detroit)
Tel: (248)347-2607 Fax: (248)347-2602
Toshiba Electronics do Brasil Ltda.
Tel: (011)2539-6681 Fax: (011)2539-6675
Toshiba India Private Ltd.
Tel: (011)2331-8422 Fax: (011)2371-4603
Toshiba Electronics Europe GmbH
Düsseldorf Head Office
Tel: (0211)5296-0 Fax: (0211)5296-400
• France Branch
Tel: (1)47282828 Fax: (1)42046491
• Italy Branch
Tel: (039)68701 Fax: (039)6870205
• Spain Branch
Tel: (91)660-6798 Fax: (91)660-6799
• U.K. Branch
Tel: (1252)5300 Fax: (1252)53-0250
• Sweden Branch
Tel: (8)704-0900 Fax: (8)80-8459
Toshiba Electronics Asia (Singapore) Pte. Ltd.
Tel: (6278)5252 Fax: (6271)5155
Toshiba Electronics Service (Thailand) Co., Ltd.
Tel: (02)501-1635 Fax: (02)501-1638
Toshiba Electronics Trading (Malaysia) Sdn. Bhd.
Kuala Lumpur Head Office
Tel: (03)5631-6311 Fax: (03)5631-6307
• Penang Office
Tel: (04)226-8523 Fax: (04)226-8515
Toshiba Electronics Asia, Ltd.
Hong Kong Head Office
Tel: 2375-6111 Fax: 2375-0969
• Beijing Office
Tel: (010)6590-8796 Fax: (010)6590-8791
• Chengdu Office
Tel: (028)8675-1773 Fax: (028)8675-1065
• Qingdao Office
Tel: (532)8579-3328 Fax: (532)8579-3329
Toshiba Electronics Shenzhen Co., Ltd.
Tel: (0755)2399-6897 Fax: (0755)2399-5573
Toshiba Electronics (Shanghai) Co., Ltd.
Shanghai Head Office
Tel: (021)6841-0666 Fax: (021)6841-5002
• Hangzhou Office
Tel: (0571)8717-5004 Fax: (0571)8717-5013
• Nanjing Office
Tel: (025)8689-0070 Fax: (025)8689-0125
Toshiba Electronics (Dalian) Co., Ltd.
Tel: (0411)8368-6882 Fax: (0411)8369-0822
Tsurong Xiamen Xiangyu Trading Co., Ltd.
Tel: (0592)226-1398 Fax: (0592)226-1399
Toshiba Electronics Korea Corporation
Seoul Head Office
Tel: (02)3484-4334 Fax: (02)3484-4302
• Daegu Office
Tel: (053)428-7610 Fax: (053)428-7617
Toshiba Electronics Taiwan Corporation
Taipei Head Office
Tel: (02)2508-9988 Fax: (02)2508-9999
(As of June 01, 2010)
2010
12 2010/9 SCE0004K