TVS Diodes Surface Mount - 600W > TPSMB series TPSMB Series RoHS Pb e3 Description Uni-directional Bi-directional The TPSMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Peak Pulse Power Dissipation by 10/1000s waveform (Fig.1)(Note 1), (Note 2) Symbol Value Unit PPPM 600 W PM(AV) 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional only (Note 4) VF 3.5 V Operating Junction Temperature Range (VBR 91V) TJ -65 to 175 Operating Junction Temperature Range (VBR > 91V) TJ -65 to 150 Storage Temperature Range TSTG -65 to 175 Typical Thermal Resistance Junction to Lead RJL 20 C/W Typical Thermal Resistance Junction to Ambient RJA 100 C/W Power Dissipation on infinite heat sink at TL=50OC C * High reliability application and automotive grade AEC Q101 qualified * Surface mount component to optimize board space * Low profile package * Typical failure mode is short from over-specified voltage or current * Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c * ESD protection of data lines in accordance with IEC 61000-4-2 30kV(Air), 30kV (Contact) * EFT protection of data lines in accordance with IEC 61000-4-4 * Glass passivated chip junction * 600W PPPM (peak pulse power) capability at 10/1000s waveform, repetition rate (duty cycles):0.01% * Fast response time: typically less than 1.0ns from 0V to VBR min * Excellent clamping capability * Low incremental surge resistance * Typical IR 1A for VR>10.2V * UL Recognized compound meeting flammability rating V-0 * Meet MSL level1, per J-STD-020, High temperature soldering guaranteed: 260C/10 seconds at terminals * Matte tin lead-free plated * Halogen free and RoHS compliant * Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Notes: 1. Non-repetitive current pulse, per Fig.4 and derated above TA=25C per Fig. 3. 2. Mounted on copper pad area of 0.2x0.2" (5.0 x 5.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only,duty cycle=4 per minute maximum. 4. VF < 3.5V for part number below 300A, VF < 5.0V for part number with 300A or above. Applications TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Automotive applications. Functional Diagram Bi-directional Cathode Anode Uni-directional (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18 TVS Diodes Surface Mount - 600W > TPSMB series Electrical Characteristics (T =25C unless otherwise noted) A Part Number (Uni) TPSMB7.5A TPSMB8.2A TPSMB9.1A TPSMB10A TPSMB11A TPSMB12A TPSMB13A TPSMB15A TPSMB16A TPSMB18A TPSMB20A TPSMB22A TPSMB24A TPSMB27A TPSMB30A TPSMB33A TPSMB36A TPSMB39A TPSMB43A TPSMB47A TPSMB51A TPSMB56A TPSMB58A TPSMB62A TPSMB68A TPSMB75A TPSMB82A TPSMB91A TPSMB100A TPSMB110A TPSMB120A TPSMB130A TPSMB150A TPSMB160A TPSMB170A TPSMB180A TPSMB200A TPSMB210A TPSMB220A TPSMB250A TPSMB300A-A TPSMB350A-A TPSMB400A-A TPSMB440A-A TPSMB480A-A TPSMB510A-A TPSMB520A-A TPSMB530A-A TPSMB540A-A TPSMB550A-A - Part Number (Bi) TPSMB10CA TPSMB11CA TPSMB12CA TPSMB13CA TPSMB15CA TPSMB16CA TPSMB18CA TPSMB20CA TPSMB22CA TPSMB24CA TPSMB27CA TPSMB30CA TPSMB33CA TPSMB36CA TPSMB39CA TPSMB43CA TPSMB47CA TPSMB51CA TPSMB56CA TPSMB58CA TPSMB62CA TPSMB68CA TPSMB75CA TPSMB82CA TPSMB91CA TPSMB100CA TPSMB110CA TPSMB120CA TPSMB130CA TPSMB150CA TPSMB160CA TPSMB170CA TPSMB180CA TPSMB200CA TPSMB210CA TPSMB220CA TPSMB250CA TPSMB300CA-A TPSMB350CA-A TPSMB400CA-A TPSMB440CA-A TPSMB480CA-A TPSMB510CA-A TPSMB520CA-A TPSMB530CA-A TPSMB540CA-A TPSMB550CA-A TPSMB600CA-A TPSMB650CA-A Marking UNI BI 7V5AA 8V2AA 9V1AA 10AA 11AA 12AA 13AA 15AA 16AA 18AA 20AA 22AA 24AA 27AA 30AA 33AA 36AA 39AA 43AA 47AA 51AA 56AA 58AA 62AA 68AA 75AA 82AA 91AA 100A 110A 120A 130A 150A 160A 170A 180A 200A 210A 220A 250A 300A 350A 400A 440A 480A 510A 520A 530A 540A 550A - 10CA 11CA 12CA 13CA 15CA 16CA 18CA 20CA 22CA 24CA 27CA 30CA 33CA 36CA 39CA 43CA 47CA 51CA 56CA 58CA 62CA 68CA 75CA 82CA 91CA 100C 110C 120C 130C 150C 160C 170C 180C 200C 210C 220C 250C 300C 350C 400C 440C 480C 510C 520C 530C 540C 550C 600C 650C Reverse Typical Stand off IR @ Voltage 150C VR (A) (Volts) 500 200 50 20 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 52.78 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 179.60 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 443.00 451.00 460.00 468.00 511.00 553.00 Breakdown Voltage VBR (Volts) @ IT Test Current IT MIN MAX (mA) 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 55.10 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 199.50 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 494.50 503.50 513.00 522.50 570.00 617.50 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 60.90 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 220.50 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 545.50 556.50 567.00 577.50 630.00 682.50 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Maximum Maximum Maximum Agency Clamping Peak Reverse Temperature Approval Voltage VC Pulse Leakage IR coefficient of @ Ipp @ VR Current Ipp VBR (%/C) (A) (V) (A) 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 79.8 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 288.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 718.0 725.0 740.0 760.0 828.0 897.0 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.7 7.2 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 2.1 1.9 1.8 1.5 1.3 1.1 1.0 0.9 0.9 0.9 0.8 0.8 0.8 0.8 0.8 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.052 0.058 0.063 0.066 0.069 0.071 0.074 0.076 0.080 0.083 0.085 0.088 0.091 0.092 0.093 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X - Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. 2. VBR @TJ= VBR@25C x (1+T x (TJ - 25)) (T:Temperature Coefficient). 3: The CTI (Comparative Tracking Index) of TPSMB600CA-A and TPSMB650CA-A is 600 and other parts is 550 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18 TVS Diodes Surface Mount - 600W > TPSMB series I-V Curve Characteristics I Uni-directional I Bi-directional Ipp Vc VBR VR Vc VBR VR V IR VF IT IT IR IR IT V Ipp Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25C unless otherwise noted) Time PPPM VR VBR VC IR VF VR VBR Vc Voltage Transients A Voltage or Current Voltage Across TVS Current Through TVS Current Through TVS PPPM-Peak Pulse Power (KW) Voltage or Current Figure 2 - Across PeakTVS Pulse Power Rating Curve Voltage Voltage Transients Voltage Across TVS Current Through TVS 100 10 1 Time 0.31x0.31" (8.0x8.0mm) 0.1 Copper Pad Area 0.001 Voltage or Current Voltage Transients Figure 1 - TVS Transients Clamping Waveform Time 0.01 0.1 1 td-Pulse Width (ms) 10 (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18 TVS Diodes Surface Mount - 600W > TPSMB series Ratings and Characteristic Curves (T =25C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 VBR91V 60 40 VBR>91V 20 0 0 25 50 75 100 125 150 175 tr=10sec Half Value IPPM IPPM ( ) 2 50 TJ-Initial Junction Temperature (C) IFSM - Peak Forward Surge Current (A) Uni-directional V=0V Cj (pF) Uni-directional @VR 100 1 1 Bi-directional @VR 10 1.0 2.0 3.0 4.0 120 1000 Tj=25C f=1.0MHz Vsig=50mVp-p td 0 Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Bi-directional V=0V 10 10/1000sec. Waveform as defined by R.E.A t-Time (ms) Figure 5 - Typical Junction Capacitance 10000 Peak Value IPPM 100 0 200 TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 100 VBR - Reverse Breakdown Voltage (V) 1000 100 80 60 40 20 0 1 10 100 Number of half-cycles at 60 Hz (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18 TVS Diodes Surface Mount - 600W > TPSMB series Soldering Parameters Pre Heat Lead-free assembly - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 120 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds tL 260 Time within 5C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6C/second max Time 25C to peak Temperature (TP) 8 minutes max. Do not exceed 260C Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25C Peak Temperature (TP) +0/-5 tp TP Temperature (T) Reflow Condition t 25C to Peak Time (t) C Physical Specifications Environmental Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Temperature Cycling JESD22-A104 0.003 ounce, 0.093 grams Weight Case JEDEC DO214AA. Molded plastic body over glass passivated junction MSL JEDEC-J-STD-020, Level 1 Polarity Color band denotes cathode for unidirectional components. H3TRB JESD22-A101 Terminal Matte Tin-plated leads, Solderable per JESD22-B102 RSH JESD22-A111 Dimensions DO-214AA (SMB J-Bend) Cathode Band for unidirectional components C A B H D F E G Dimension in inches and (millimeters) J K L Dimensions Inches Millimeters Min Max Min Max A 0.077 B 0.160 0.086 1.950 2.200 0.180 4.060 4.570 C 0.130 0.155 3.300 3.940 D 0.084 0.096 2.130 2.440 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.205 0.220 5.210 5.590 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - I Solder Pads (all dimensions in mm) (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18 TVS Diodes Surface Mount - 600W > TPSMB series Part Numbering System Part Marking System F TPSMB XXX C A [-A] DESIGN CODE 5% VBR VOLTAGE TOLERANCE XXXX BI-DIRECTIONAL VBR VOLTAGE YMXXX SERIES Cathode Band for unidirectional components Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Component Package Part number TPSMBxxxXX DO-214AA Packaging Option Quantity 3000 Tape & Reel - 12mm tape/13" reel Packaging Specification EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) Cathode mark for unidirectional components 0.47 (12.0) 0.315 (8.0) 0.059 DIA (1.5) Cover tape 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.49 (12.5) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18