Order this document by BFS17LT1/D SEMICONDUCTOR TECHNICAL DATA The RF Line Designed primarily for use in high-gain, low-noise amplifier, oscillator and mixer applications. Packaged for thick or thin film circuits using surface mount components. * T1 suffix indicates tape and reel packaging of 3,000 units per reel. RF TRANSISTOR NPN SILICON MAXIMUM RATINGS Symbol Value Unit Collector-Emitter Voltage Rating VCEO 15 Vdc Collector-Base Voltage VCBO 25 Vdc Maximum Junction Temperature TJmax 150 C Symbol Max Unit Total Device Dissipation, TA = 25C Derate above 25C (1) PD 350 2.8 mW mW/C Storage Temperature Tstg - 55 to +150 C Thermal Resistance Junction to Ambient (1) RJA 357 C/W THERMAL CHARACTERISTICS Characteristic CASE 318-08, STYLE 6 SOT-23 LOW PROFILE (TO-236AA/AB) DEVICE MARKING BFS17LT1 = E1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted.) Symbol Min Typ Max Unit Collector-Emitter Breakdown Voltage (IC = 10 mA) V(BR)CEO 15 -- -- Vdc Collector-Base Breakdown Voltage (IC = 100 A) V(BR)CBO 25 -- -- Vdc Collector Cutoff Current (VCE = 10 V) ICEO -- -- 25 nA Collector Cutoff Current (VCB = 10 V) ICBO -- -- 25 nA Emitter Cutoff Current (VEB = 4 V) IEBO -- -- 100 A 20 20 -- -- 150 -- Characteristic OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (IC = 2 mA, VCE = 1 V) (IC = 25 mA, VCE = 1 V) hFE -- Collector-Emitter Saturation Voltage (IC = 10 mA, IB = 1 mA) VCE(sat) -- -- 0.4 V Base-Emitter Saturation Voltage (IC = 10 mA, IB = 1 mA) VBE(sat) -- -- 1 V -- -- 1 1.3 -- -- CCB -- 1 -- pF NF -- 5 -- dB SMALL-SIGNAL CHARACTERISTICS Current-Gain -- Bandwidth Product (IC = 2 mA, VCE = 5 V, f = 500 MHz) (IC = 25 mA, VCE = 5 V, f = 500 MHz) Output Capacitance (VCB = 10 V, f = 1 MHz) Noise Figure (IC = 2 mA, VCE = 5 V, RS = 50 , f = 30 MHz) fT GHz NOTE: 1. Package mounted on 99.5% alumina 10 x 8 x 0.6 mm. REV 7 RF DEVICE DATA MOTOROLA Motorola, Inc. 1995 BFS17LT1 1 PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. A L 3 B S 1 V 2 G C H D K J DIM A B C D G H J K L S V INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR CASE 318-08 ISSUE AE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 BFS17LT1 2 *BFS17LT1/D* BFS17LT1/D MOTOROLA RF DEVICE DATA