DF15005S thru DF1510S Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers Voltage Range 50 to 1000 Volts Forward Current 1.5 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junctions High surge overload rating of 50 Amperes peak Ideal for printed circuit boards Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 260oC/10 seconds at 5 lbs. (2.3kg) tension Polarity: Polarity symbols marked on body Mounting Position: Any Weight: 0.014oz., 0.38g Maximum Ratings and Electrical Characteristics (TA=25oC unless otherwise noted) Parameter Symbols DF 15005S DF 1501S DF 1502S DF 1504S DF 1506S DF 1508S DF 1510S Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage V DC Maximum average forward output rectified current at TA=40oC (2) IF(AV) 1.5 Amps Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150oC IFSM 50.0 Amps I2t 10 A 2 se c VF 1.1 Volts IR 5.0 500 uA pF Rating for fusing (t < 8.3ms) Max. instantaneous forward voltage drop per leg at 1.5A TA=25oC TA=125oC Maximum DC reverse current at rated DC blocking voltage per leg Typical junction capacitance per leg Typical thermal resistance per leg (1) (2) Operating junction and storage temperature range Notes: CJ 25 RJA RJL 40 15 TJ, TSTG -55 to +150 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 2. Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13mm) copper pads 606 o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 607