www.ti.com
FEATURES DESCRIPTION
BLOCK DIAGRAM
11
A/B
Vcc 7 12
5 9
GROUND
4 7
RT/CT
2 3
VFB
1 1COMP
3 5
CURRENT
SENSE
34 V
2.50 V
OSC
UVLO
S/R 5 V
REF
VREF
Good
Logic
Internal
BIAS
Error
Amp 2R
R1 V CURRENT
SENSE
COMPARATOR
PWM
LATCH
S
R
T
8 14
VREF
5 V
50 mA
7
VC
106
OUTPUT
85
POWER
GROUND
Note 1:
Note 2: A = DIL−8 Pin Number. B = SO−14 and CFP−14 Pin Number.
Toggle flip flop used only in 1844 and 1845.
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
CURRENT MODE PWM CONTROLLER
Optimized For Off-line and DC-to-DC
The UC1842/3/4/5 family of control devices providesConverters
the necessary features to implement off-line ordc-to-dc fixed frequency current mode controlLow Start-Up Current (<1 mA)
schemes with a minimal external parts count.Automatic Feed Forward Compensation
Internally implemented circuits include under-voltagePulse-by-Pulse Current Limiting
lockout featuring start up current less than 1 mA, aprecision reference trimmed for accuracy at the errorEnhanced Load Response Characteristics
amp input, logic to insure latched operation, a PWMUnder-Voltage Lockout With Hysteresis
comparator which also provides current limit control,Double Pulse Suppression
and a totem pole output stage designed to source orsink high peak current. The output stage, suitable forHigh Current Totem Pole Output
driving N-Channel MOSFETs, is low in the off state.Internally Trimmed Bandgap Reference
Differences between members of this family are the500-kHz Operation
under-voltage lockout thresholds and maximum dutyLow R
O
Error Amp
cycle ranges. The UC1842 and UC1844 have UVLOthresholds of 16 V
ON
and 10 V
OFF
, ideally suited tooff-line applications. The corresponding thresholdsfor the UC1843 and UC1845 are 8.4 V and 7.6 V.The UC1842 and UC1843 can operate to duty cyclesapproaching 100%. A range of zero to 50% isobtained by the UC1844 and UC1845 by the additionof an internal toggle flip flop which blanks the outputoff every other clock cycle.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1997–2007, Texas Instruments IncorporatedProducts conform to specifications per the terms of the TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.
www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
CONNECTION DIAGRAMS
1
2
3
4
8
7
6
5
COMP
VFB
ISENSE
RT/CT
VREF
VCC
OUTPUT
GROUND
DIL-8, SOIC-8
N or J PACKAGE, D8 PACKAGE
(TOP VIEW)
NC − No internal connection
1
2
3
4
5
6
7
14
13
12
11
10
9
8
COMP
NC
VFB
NC
ISENSE
NC
RT/CT
SOIC-14, CFP-14
D or W PACKAGE
(TOP VIEW)
VREF
NC
VCC
VC
OUTPUT
GROUND
PWR GND
3 2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
VCC
VC
NC
OUTPUT
NC
NC
VFB
NC
ISENSE
NC
PLCC-20
Q PACKAGE
(TOP VIEW)
NC
COMP
NC
PWR GND
GROUND NC
NC
NC
RT/CT
VREF
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
UNIT
Low impedance source 30 VSupply voltage
I
CC
< 30 mA Self LimitingOutput current ±1 AOutput energy (capacitive load) 5 µJAnalog inputs (Pins 2, 3) –0.3 V to 6.3 VError amp output sink current 10 mAT
A
25 °C (DIL-8) 1 WPower dissipation T
A
25 °C (SOIC-14) 725 mWT
A
25 °C (SOIC-8) 650 mWStorage temperature range –65 °C to 150 °CJunction temperature range –55 °C to 150 °CLead temperature (soldering, 10 seconds) 300 °C
(1) All voltages are with respect to Pin 5. All currents are positive into the specified terminal. Consult Packaging Section of Databook forthermal limitations and considerations of packages.
2
Submit Documentation Feedback
www.ti.com
Temp Stability +VREF(max)*VREF (min)
TJ(max)*TJ (min)
V
REF(max)
and V
REF(min)
are the maximum and minimum reference voltages measured over
THERMAL CHARACTERISTICS
DISSIPATION RATINGS
ELECTRICAL CHARACTERISTICS
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
over operating free-air temperature range (unless otherwise noted)
PACKAGE θ
JC
θ
JA
DIL-8 J 28
(1)
125-160N 25 110
(2)
SOIC-8 D8 42 84-160
(2)
SOIC-14 D14 35 50-120
(2)
CFP-14 W 5.49 °C/W 175.4C/WPLCC-20 Q 34 43-75
(2)
(1) θ
JC
data values stated were derived from MIL-STD-1835B.(2) Specified θ
JA
(junction to ambient) is for devices mounted to 5 in
2
FR4 PC board with one ounce copper where noted. When resistancerange is given, lower values are for 5 in
2
. Test PWB was 0.062 in thick and typically used 0.635-mm trace widths for power packagesand 1.3-mm trace widths for non-power packages with 100 x 100-mil probe land area at the end of each trace.
T
A
25 °C DERATING FACTOR T
A
70 °C T
A
85 °CPO T
A
125 °CPACKAGE
POWER RATING ABOVE T
A
25 °C POWER RATING WER RATING POWER RATING
W 700 mW 5.5 mW/ °C 452 mW 370 mW 150 mW
Unless otherwise stated, these specifications apply for –55 °CT
A
125 °C for the UC184X; –40 °CT
A
85 °C for theUC284X; 0 °CT
A
70 °C for the 384X; V
CC
= 15 V
(1)
; R
T
= 10 k ; C
T
= 3.3 nF, T
A
= T
J
.
UC1842/3/4/5
UC3842/3/4/5UC2842/3/4/5PARAMETER TEST CONDITIONS UNITMIN TYP MAX MIN TYP MAX
REFERENCE SECTION
Output Voltage T
J
= 25 °C, I
O
= 1 mA 4.95 5.00 5.05 4.90 5.00 5.10 VLine Regulation 12 V
IN
25 V 6 20 6 20
mVLoad Regulation 1 I
0
20 mA 6 25 6 25Temp. Stability See
(2) (3)
0.2 0.4 0.2 0.4 mV/ °CTotal Output Variation Line, load, tempature
(2)
4.9 5.1 4.82 5.18 VOutput Noise Voltage 10 Hz f10 kHz, T
J
= 25 °C
(2)
50 50 µVLong Term Stability T
A
= 125 °C, 1000 Hrs
(2)
5 25 5 25 mVOutput Short Circuit –30 –100 –180 –30 –100 –180 mA
OSCILLATOR SECTION
Initial Accuracy T
J
= 25 °C
(4)
47 52 57 47 52 57 kHzVoltage Stability 12 V
CC
25 V 0.2% 1% 0.2% 1%Temp. Stability T
MIN
T
A
T
MAX
(2)
5% 5%Amplitude V
PIN
4 peak-to-peak
(2)
1.7 1.7 V
(1) Adjust V
CC
above the start threshold before setting at 15 V.(2) These parameters, although specified, are not 100% tested in production.(3) Temperature stability, sometimes referred to as average temperature coefficient, is described by the equation:
the appropriate temperature range. Note that the extremes in voltage do not necessarily occur at the extremes in temperature.(4) Output frequency equals oscillator frequency for the UC1842 and UC1843.Output frequency is one half oscillator frequency for the UC1844 and UC1845.
3Submit Documentation Feedback
www.ti.com
(7) Gain defined as:
A+DVPIN 1
DVPIN 3, 0 vVPIN 3 v0.8 V
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
ELECTRICAL CHARACTERISTICS (continued)Unless otherwise stated, these specifications apply for –55 °CT
A
125 °C for the UC184X; –40 °CT
A
85 °C for theUC284X; 0 °CT
A
70 °C for the 384X; V
CC
= 15 V ; R
T
= 10 k ; C
T
= 3.3 nF, T
A
= T
J
.
UC1842/3/4/5
UC3842/3/4/5UC2842/3/4/5PARAMETER TEST CONDITIONS UNITMIN TYP MAX MIN TYP MAX
ERROR AMP SECTION
Input Voltage V
PIN 1
= 2.5 V 2.45 2.50 2.55 2.42 2.50 2.58 VInput Bias Current –0.3 –1 –0.3 –2 µAA
VOL
2V
O
4 V 65 90 65 90 dBUnity Gain Bandwidth T
J
= 25 °C
(5)
0.7 1 0.7 1 MHzPSRR 12 V
CC
25 V 60 70 60 70 dBOutput Sink Current V
PIN 2
= 2.7 V, V
PIN 1
= 1.1 V 2 6 2 6
mAOutput Source Current V
PIN 2
= 2.3 V, V
PIN 1
= 5 V –0.5 –0.8 –0.5 –0.8V
OUT
High V
PIN 2
= 2.3 V, R
L
= 15 k to ground 5 6 5 6
VV
OUT
Low V
PIN 2
= 2.7 V, R
L
= 15 k to Pin 8 0.7 1.1 0.7 1.1
CURRENT SENSE SECTION
Gain See
(6) (7)
2.85 3 3.15 2.85 3 3.15 V/VMaximum Input Signal V
PIN 1
= 5 V
(6)
0.9 1 1.1 0.9 1 1.1 VPSRR 12 V
CC
25 V
(5) (6)
70 70 dBInput Bias Current –2 –10 –2 –10 µADelay to Output V
PIN 3
= 0 V to 2 V
(5)
150 300 150 300 ns
OUTPUT SECTION
I
SINK
= 20 mA 0.1 0.4 0.1 0.4Output Low Level
I
SINK
= 200 mA 1.5 2.2 1.5 2.2
VI
SOURCE
= 20 mA 13 13.5 13 13.5Output High Level
I
SOURCE
= 200 mA 12 13.5 12 13.5Rise Time T
J
= 25°C, C
L
= 1 nF
(5)
50 150 50 150
nsFall Time T
J
= 25 °C, C
L
= 1nF
(5)
50 150 50 150
UNDER-VOLTAGE LOCKOUT SECTION
X842/4 15 16 17 14.5 16 17.5Start Threshold
X843/5 7.8 8.4 9.0 7.8 8.4 9.0
VX842/4 9 10 11 8.5 10 11.5Min. Operating Voltage AfterTurn On
X843/5 7.0 7.6 8.2 7.0 7.6 8.2
PWM SECTION
X842/3 95% 97% 100% 95% 97% 100%Maximum Duty Cycle
X844/5 46% 48% 50% 47% 48% 50%Minimum Duty Cycle 0% 0%
TOTAL STANDBY CURRENT
Start-Up Current 0.5 1 0.5 1
mAOperating Supply Current V
PIN 2
= V
PIN 3
= 0 V 11 17 11 17V
CC
Zener Voltager I
CC
= 25 mA 30 34 30 34 V
(5) These parameters, although specified, are not 100% tested in production.(6) Parameter measured at trip point of latch with V
PIN 2
= 0.
4
Submit Documentation Feedback
www.ti.com
ERROR AMP CONFIGURATION
_
+
2.5 V
2
1
VFB
COMP
ZF
ZI
0.5 mA
UNDER-VOLTAGE LOCKOUT
VCC
<17 mA
<1 mA
VOFF VON
VCC
7
VCC ON/OFF Command
to REST of IC
UC1842
UC1844 UC1843
UC1845
VON
VOFF
16 V
10 V
8.4 V
7.6 V
CURRENT SENSE CIRCUIT
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
Error amp can source or sink up to 0.5 mA.
During under-voltage lock-out, the output drive is biased to sink minor amounts of current. Pin 6 should beshunted to ground with a bleeder resistor to prevent activating the power switch with extraneous leakagecurrents.
A small RC filter may be required to suppress switch transients.
5Submit Documentation Feedback
www.ti.com
OSCILLATOR SECTION
8
4
5
VREF
RT/CT
GROUND
RT
CT
For RT> 5 K f ~1.72
RTCT
30
10
3
1
0.3
td ms
1 2.2 4.7 10 22 47 100
CT − nF
Deadtime vs CT (RT >5 kW)
RT− (k )W
100
30
10
3100 1 k 10 k 100 k 1 M
f − Frequency − Hz
Timing Resistance vs Frequency
OUTPUT SATURATION CHARACTERISTICS
4
3
2
1
0.01 .02 .03 .04 .05 .07 .1 .2 .3 .4 .5 .7 1
SINK SAT (VOL)
SOURCE SAT
(VCC VOH)
VCC = 15 V
TA = 25°C
TA = −55°C
Output Current, Source or Sink − A
Saturation Voltage − V
ERROR AMPLIFIER OPEN-LOOP FREQUENCY RESPONSE
80
60
40
20
0
0
−45
−90
−135
−180
Voltage Gain − dB
Phase Margin − °
Av
θ
10 100 1 k 10 k 100 k 1 M 10 M
f − Frequency − Hz
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
6
Submit Documentation Feedback
www.ti.com
OPEN-LOOP LABORATORY FIXTURE
4.7 kW
1 kW
ERROR AMP
ADJUST
4.7 kW
5 kW
ISENSE
ADJUST
2N2222
100 kW
R1
1
2
3
4
8
7
6
5
COMP
UC1842
VFB
ISENSE
RT / CT
CT
0.1 mF
0.1 mF
A
1 kW1 W
VREF
VCC
OUTPUT
GROUND
VREF
VCC
OUTPUT
GROUND
SHUTDOWN TECHNIQUES
8
3
1 kW
330 W
SHUTDOWN
500 W
To Current
SENSE RESISTOR
VREF
ISENSE
1
SHUTDOWN
COMP
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
High peak currents associated with capacitive loads necessitate careful grounding techniques. Timing and bypascapacitors should be conected close to pin 5 in a single point ground. The transistor and 5k potentiometer areused to sample the oscillator waveform and apply an adjustable ramp to pin 3.
Shutdown of the UC1842 can be accomplished by two methods; either raise pin 3 above 1 V or pull pin 1 belowa voltage two diode drops above ground. Either method causses the output of the PWM comparator to be high(refer to block diagram). The PWM latch is reset dominant so that the output will remain low until the next clockcycle after the shutdown condition at pin 1 and/or 3 is removed. In one example, an externally latched shutdownmay be accomplished by adding an SCR which will be reset by cycling V
CC
below the lower UVLO threshold. Atthis pint the reference turns off, allowing the SCR to reset.
7Submit Documentation Feedback
www.ti.com
OFFLINE FLYBACK REGULATOR
R1
5 1 W
117 VAC VARO
VM 68 C1
250 µF
250 V R2
56 k
2 W
R12
4.7 k
2 W
C9
3300 pF
600 V NP
D4
1N3613
D2
1N3612 D3
1N3612
NC
R3
20 k
R4
4.7 k
C4
47 µF
25 V
R9
68
3 W
C3
22 µF
C2
100 µF
25 V
7
2
1
8
453
6
UC3844
R5 150 k
C14
100 pF
R6
10 k
C5
0.01 µFC6
0.0022 µF
USD1120
R7
22
R8
1 k
C7
470 pF R13
20 kR10
0.55
1 W
Q1
UFN833
T1 D6
U9D946 L1
N5 C10
4700 µF
10 V
C11
4700 µF
10 V
+6 V
COM
+12 V
±12 V COM
−12 V
D7
UF81002
N12
N12
C12
2200 µF
16 V
C13
2200 µF
16 V
D8
UES1002
C8
680 pF
600 V
D8
1N3613 R11
2.7 k
2 W
Power Supply Specifications
SLOPE COMPENSATION
8
4
3
VREF
RT / CT
ISENSE
UC1842/3
0.1 mFRT
CT
R1 R2
C
ISENSE
RSENSE
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
SLUS223C APRIL 1997 REVISED JUNE 2007
1. Input Voltagesa. 5VAC to 130VA (50 Hz/60 Hz)2. Line Isolation: 3750 V3. Switchng Frequency: 40 kHz4. Efficiency at Full Load 70%5. Output Voltage:a. +5 V, ±5%; 1A to 4A loadRipple voltage: 50 mV P-P Maxb. +12 V, ±3%; 0.1A to 0.3A loadRipple voltage: 100 mV P-P Maxc. –12 V, ±3%; 0.1A to 0.3A loadRipple voltage: 100 mV P-P Max
A fraction of the oscillator ramp can be resistively summed with the current sense signal to provide slopecompensation for converters requiring duty cycles over 50%.
8
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-8670401PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-8670401XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-8670402PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-8670402XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-8670403PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-8670403XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-8670404DA ACTIVE CFP W 14 1 TBD Call TI Call TI
5962-8670404PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-8670404XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI
UC1842J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1842J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1842L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
UC1842W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
UC1843J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1843J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1843L ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
UC1843L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
UC1843W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
UC1844J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1844J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1844L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
UC1845J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1845J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
UC1845L ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
UC1845L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
UC1845W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
UC1845W883B ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
UC2842D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC2842D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2842J OBSOLETE CDIP JG 8 TBD Call TI Call TI
UC2842N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2842NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2843D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2843J OBSOLETE CDIP JG 8 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC2843N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2843NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2844D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2844N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2844NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2845D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 4
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC2845DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC2845J OBSOLETE CDIP JG 8 TBD Call TI Call TI
UC2845N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC2845NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3842D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3842N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3842NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3843D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 5
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC3843D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3843N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3843NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3843QTR OBSOLETE PLCC FN 20 TBD Call TI Call TI
UC3844D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3844N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3844NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3845AJ ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 6
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC3845D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845D8 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845D8G4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845D8TR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845DTR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
UC3845N ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
UC3845NG4 ACTIVE PDIP P 8 50 Green (RoHS
& no Sb/Br) CU NIPDAU N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 7
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF UC1842, UC1843, UC1844, UC1845, UC3842, UC3843, UC3844, UC3845, UC3845AM :
Catalog: UC3842, UC3843, UC3844, UC3845, UC3842M, UC3845A
Military: UC1842, UC1843, UC1844, UC1845
Space: UC1842-SP, UC1843-SP, UC1844-SP, UC1845-SP
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Military - QML certified for Military and Defense Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0 (mm) B0 (mm) K0 (mm) P1
(mm) W
(mm) Pin1
Quadrant
UC2842D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC2842DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC2843D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC2843DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC2844D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC2844DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC2845D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC2845DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC3842D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC3842DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC3843D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC3843DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC3844D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC3844DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
UC3845D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
UC3845DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 19-Mar-2008
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
UC2842D8TR SOIC D 8 2500 340.5 338.1 20.6
UC2842DTR SOIC D 14 2500 333.2 345.9 28.6
UC2843D8TR SOIC D 8 2500 340.5 338.1 20.6
UC2843DTR SOIC D 14 2500 333.2 345.9 28.6
UC2844D8TR SOIC D 8 2500 340.5 338.1 20.6
UC2844DTR SOIC D 14 2500 333.2 345.9 28.6
UC2845D8TR SOIC D 8 2500 340.5 338.1 20.6
UC2845DTR SOIC D 14 2500 333.2 345.9 28.6
UC3842D8TR SOIC D 8 2500 340.5 338.1 20.6
UC3842DTR SOIC D 14 2500 333.2 345.9 28.6
UC3843D8TR SOIC D 8 2500 340.5 338.1 20.6
UC3843DTR SOIC D 14 2500 333.2 345.9 28.6
UC3844D8TR SOIC D 8 2500 340.5 338.1 20.6
UC3844DTR SOIC D 14 2500 333.2 345.9 28.6
UC3845D8TR SOIC D 8 2500 340.5 338.1 20.6
UC3845DTR SOIC D 14 2500 333.2 345.9 28.6
PACKAGE MATERIALS INFORMATION
www.ti.com 19-Mar-2008
Pack Materials-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUAR Y 1997
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,16)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
MECHANICAL DATA
MPLC004A – OCTOBER 1994
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
FN (S-PQCC-J**) PLASTIC J-LEADED CHIP CARRIER
4040005/B 03/95
20 PIN SHOWN
0.026 (0,66)
0.032 (0,81)
D2/E2
0.020 (0,51) MIN
0.180 (4,57) MAX
0.120 (3,05)
0.090 (2,29)
D2/E2
0.013 (0,33)
0.021 (0,53)
Seating Plane
MAX
D2/E2
0.219 (5,56)
0.169 (4,29)
0.319 (8,10)
0.469 (11,91)
0.569 (14,45)
0.369 (9,37)
MAX
0.356 (9,04)
0.456 (11,58)
0.656 (16,66)
0.008 (0,20) NOM
1.158 (29,41)
0.958 (24,33)
0.756 (19,20)
0.191 (4,85)
0.141 (3,58)
MIN
0.441 (11,20)
0.541 (13,74)
0.291 (7,39)
0.341 (8,66)
18
19
14
13
D
D1
13
9
E1E
4
8
MINMAXMIN
PINS
**
20
28
44
0.385 (9,78)
0.485 (12,32)
0.685 (17,40)
52
68
84 1.185 (30,10)
0.985 (25,02)
0.785 (19,94)
D/E
0.395 (10,03)
0.495 (12,57)
1.195 (30,35)
0.995 (25,27)
0.695 (17,65)
0.795 (20,19)
NO. OF D1/E1
0.350 (8,89)
0.450 (11,43)
1.150 (29,21)
0.950 (24,13)
0.650 (16,51)
0.750 (19,05)
0.004 (0,10)
M
0.007 (0,18)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-018
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated