Product Folder Sample & Buy Support & Community Tools & Software Technical Documents LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 LM4041-N-xx Precision Micropower Shunt Voltage Reference 1 Features 3 Description * * Ideal for space-critical applications, the LM4041-N precision voltage reference is available in the subminiature SC70 and SOT-23 surface-mount packages. The advanced design of the LM4041-N eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, thus making the LM4041-N easy to use. Further reducing design effort is the availability of a fixed (1.225 V) and adjustable reverse breakdown voltage. The minimum operating current is 60 A for the LM4041-N 1.2 and the LM4041-N ADJ. Both versions have a maximum operating current of 12 mA. 1 * * * * * * * * * * * Qualified for Automotive Applications SEC-Q100 Qualified With the Following Results: - Device Temperature Grade 1: -40C to +125C Ambient Temperature Range - Device Temperature Grade 3: -40C to +85C Ambient Temperature Range (For SOT-23 Only) Available in Standard, AEC Q-100 Grade 1 (Extended Temperature Range), and Grade 3 (Industrial Temperature Range) Qualified Versions (SOT-23 Only) Small Packages: SOT-23, TO-92, and SC70 No Output Capacitor Required Tolerates Capacitive Loads Reverse Breakdown Voltage Options of 1.225 V and Adjustable Output Voltage Tolerance (A grade, 25C) = 0.1%(Maximum) Low Output Noise (10 Hz to 10kHz) = 20 Vrms Wide Operating Current Range of 60 A to 12 mA Industrial Temperature Range (LM4041A/B-N, LM4041-N-Q1A/Q1B) of -40C to +85C Extended Temperature Range (LM4041C/D/E-N, LM4041-N-Q1C/Q1D/Q1E) of -40C to +125C Low Temperature Coefficient of 100 ppm/C (Maximum) 2 Applications * * * * * * * The LM4041-N uses fuse and Zener-zap reverse breakdown or reference voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than 0.1% (A grade) at 25C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents. Device Information(1) PART NUMBER LM4041-N LM4041-N-Q1 PACKAGE BODY SIZE (NOM) SC70 (5) 1.25 mm x 2.00 mm SOT-23 (3) 1.30 mm x 2.92 mm TO-92 (3) 4.30 mm x 4.30 mm SOT-23 (3) 1.30 mm x 2.92 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Block Diagram Portable, Battery-Powered Equipment Data Acquisition Systems Instrumentation Process Control Energy Management Automotive Precision Audio Components 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com Table of Contents 1 2 3 4 5 6 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 6.1 6.2 6.3 6.4 6.5 1 1 1 2 3 4 Absolute Maximum Ratings ...................................... 4 ESD Ratings.............................................................. 5 Recommended Operating Conditions....................... 5 Thermal Information .................................................. 5 LM4041-N-xx 1.2 Electrical Characteristics (Industrial Temperature Range).................................................. 6 6.6 LM4041-N-xx 1.2 Electrical Characteristics (Industrial Temperature Range).................................................. 7 6.7 LM4041-N-xx 1.2 Electrical Characteristics (Extended Temperature Range).................................................. 9 6.8 LM4041-N-xx ADJ (Adjustable) Electrical Characteristics (Industrial Temperature Range) ...... 11 6.9 LM4041-N-xx ADJ (Adjustable) Electrical Characteristics (Extended Temperature Range) ..... 13 6.10 Typical Characteristics .......................................... 14 7 8 Parameter Measurement Information ................ 17 Detailed Description ............................................ 17 8.1 8.2 8.3 8.4 9 Overview ................................................................. Functional Block Diagram ....................................... Feature Description................................................. Device Functional Modes........................................ 17 17 17 18 Application and Implementation ........................ 19 9.1 Application Information............................................ 19 9.2 Typical Applications ................................................ 20 10 Power Supply Recommendations ..................... 27 11 Layout................................................................... 27 11.1 Layout Guidelines ................................................. 27 11.2 Layout Example .................................................... 27 12 Device and Documentation Support ................. 28 12.1 12.2 12.3 12.4 12.5 Related Links ........................................................ Community Resources.......................................... Trademarks ........................................................... Electrostatic Discharge Caution ............................ Glossary ................................................................ 28 28 28 28 28 13 Mechanical, Packaging, and Orderable Information ........................................................... 28 4 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision F (July 2013) to Revision G * Page Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ................................................................................................. 1 Changes from Revision D (April 2013) to Revision E * 2 Page Changed layout of National Data Sheet to TI format ........................................................................................................... 24 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 5 Pin Configuration and Functions DBZ Package 3-Pin SOT-23 Top View DCK Package 5-Pin SC70 Top View 1 1 + 3* 5 t N/C 2 2 N/C* - 3 + 4 N/C 1.2 V LP Package 3-Pin TO-92 Top View Pin Functions PIN I/O DESCRIPTION NAME SOT-23 SC70 TO-92 Anode 2 1 1 O Anode pin, normally grounded Cathode 1 3 2 I/O Shunt current and output voltage FB -- -- -- I NC** 3 2 -- -- **Must float or connect to anode NC -- 4, 5 3 -- No connect Feedback pin for adjustable output voltage Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 3 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com DBZ Package 3-Pin SOT-23 Top View DCK Package 5-Pin SC70 Top View 1 5 1 FB 3 FB N/C - 2 2 + t ADJ 4 3 N/C + ADJ LP Pakage 3-Pin TO-92 Bottom View Pin Functions: ADJ Pinouts PIN I/O DESCRIPTION NAME SOT-23 SC70 TO-92 Anode 3 2 1 O Anode pin, normally grounded Cathode 2 3 2 I/O Shunt current and output voltage FB 1 5 3 I NC** -- -- -- -- Feedback pin for adjustable output voltage **Must float or connect to anode NC -- 1, 4 -- -- No connect 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) (2) MAX UNIT Reverse current MIN 20 mA Forward current 10 mA Maximum output voltage (LM4041-N ADJ, LM4041-N-Q1 ADJ) 15 V DBZ package 306 mW LP package 550 mW DCK package 241 mW Vapor phase (60 seconds) 215 C Infrared (15 seconds) 220 C Soldering (10 seconds) 260 C 150 C Power dissipation (TA = 25C) (3) Lead temperature DBZ packages LP package Storage temperature, Tstg (1) (2) (3) 4 -65 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications. The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), JA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/RJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4041-N, TJmax = 125C, and the typical thermal resistance (RJA), when board mounted, is 326C/W for the SOT-23 package, 415C/W for the SC70 package and 180C/W with 0.4-in lead length and 170C/W with 0.125-in lead length for the TO-92 package. Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 6.2 ESD Ratings VALUE V(ESD) (1) (2) (3) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1) (2) 2000 Charged-device model (CDM), per JEDEC specification JESD22-C101 (3) 200 Machine model (MM) 200 UNIT V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. The human-body model is a 100-pF capacitor discharged through a 1.5-k resistor into each pin. The machine model is a 200-pF capacitor discharged directly into each pin. All pins are rated at 2 kV for human-body model, but the feedback pin which is rated at 1 kV. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 250-V CDM is possible with the necessary precautions. 6.3 Recommended Operating Conditions (1) See MIN NOM MAX UNIT Temperature Tmin TA Tmax C Industrial temperature -40 TA 85 C -40 TA Extended temperature Reverse current Output voltage (1) 125 C LM4041-N 1.2, LM4041-N-Q1 1.2 60 1200 A LM4041-N ADJ, LM4041-N-Q1 ADJ 60 1200 A LM4041-N ADJ, LM4041-N-Q1 ADJ 1.24 10 V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. 6.4 Thermal Information LM4041-N, LM4041-N-Q1 LM4041-N THERMAL METRIC (1) SC70 TO-92 SOT-23 5 PINS 3 PINS 3 PINS UNIT RJA Junction-to-ambient thermal resistance 265.3 161.5 291.9 C/W RJC(top) Junction-to-case (top) thermal resistance 93.1 84.5 114.3 C/W RJB Junction-to-board thermal resistance 46.7 -- 62.3 C/W JT Junction-to-top characterization parameter 2.2 28.4 7.4 C/W JB Junction-to-board characterization parameter 45.9 140.6 61 C/W RJC(bot) Junction-to-case (bottom) thermal resistance -- -- -- C/W (1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 5 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com 6.5 LM4041-N-xx 1.2 Electrical Characteristics (Industrial Temperature Range) All limits TA = TJ = 25C for the LM4041xAIM3, LM4041xBIM3, LM4041AIZ, LM4041BIZ and LM4041BIM7 devices, unless otherwise specified. The grades A and B designate initial reverse breakdown voltage tolerances of 0.1% and 0.2%, respectively. PARAMETER Reverse breakdown voltage IR = 100 A IR = 100 A VR Reverse breakdown voltage tolerance (3) TA = TJ = TMIN to TMAX IRMIN Minimum operating current VR/T Average reverse breakdown voltage temperature Coefficient (3) MIN (1) TEST CONDITIONS TYP (2) 1.225 1.2 LM4041BIM3, LM4041QBIM3 LM4041BIZ, LM4041BIM7 2.4 LM4041AIM3, LM4041QAIM3 LM4041AIM3, LM4041AIZ 9.2 LM4041BIM3, LM4041QBIM3 LM4041BIZ, LM4041BIM7 10.4 mV 45 TA = TJ = TMIN to TMAX 60 65 IR= 10 mA UNIT V LM4041AIM3, LM4041QAIM3 LM4041AIM3, LM4041AIZ TA = TJ = 25C IR = 1 mA MAX (1) A 20 TA = TJ = 25C 15 TA = TJ = TMIN to TMAX IR = 100 A 100 ppm/C 15 TA = TJ = 25C 0.7 1.5 Reverse breakdown voltage change with operating current change (4) IRMIN IR 1 mA ZR Reverse dynamic impedance IR = 1 mA, f = 120 Hz, IAC= 0.1 IR 0.5 eN Wideband noise IR = 100 A 10 Hz f 10 kHz 20 Vrms VR Reverse breakdown voltage long-term stability t = 1000 hrs T = 25C 0.1C IR = 100 A 120 ppm VHYST Thermal hysteresis (5) T = -40C to +125C VR/IR (1) (2) (3) (4) (5) 6 1 mA IR 12 mA TA = TJ = TMIN to TMAX TA = TJ = 25C 2 4 TA = TJ = TMIN to TMAX 6 mV 8 1.5 0.08% Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VRT)(max T)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25 C to T MAX or TMIN, and VR is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total over-temperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: B-grade: 1.2% = 0.2% 100 ppm/C x 100C C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 4.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade LM4041-N 1.2 has an over-temperature Reverse Breakdown Voltage tolerance of 1.2 V x 0.75% = 9.2 mV. Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the +25C measurement after cycling to temperature +125C. Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 6.6 LM4041-N-xx 1.2 Electrical Characteristics (Industrial Temperature Range) All limits TA = TJ = 25C. unless otherwise specified. The grades C, D, and E designate initial reverse breakdown voltage tolerances of 0.5%, 1.0%, and 2.0%, respectively. PARAMETER Reverse Breakdown Voltage IR = 100 A Reverse breakdown voltage tolerance (3) IR = 100 A TA = TJ = 25C Minimum operating current TA = TJ = TMIN to TMAX 6 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 12 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 25 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 14 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 24 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 36 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 65 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 70 20 15 TA = TJ = TMIN to TMAX 100 ppm/C LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 IR= 100 A (2) (3) A LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 IR = 1 mA 60 65 TA = TJ = 25C (1) 45 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 IR = 10 mA VR Temperature coefficient (3) UNIT V LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 VR/T MAX (1) mV TA = TJ = TMIN to TMAX IRMIN TYP (2) 1.225 TA = TJ = 25C VR MIN (1) TEST CONDITIONS 150 15 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for reverse breakdown voltage tolerance is defined as the room temperature reverse breakdown voltage tolerance [(VRT)(max T)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25 C to T MAX or TMIN, and VR is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total over-temperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: B-grade: 1.2% = 0.2% 100 ppm/C x 100C C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 4.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade LM4041-N 1.2 has an over-temperature reverse breakdown voltage tolerance of 1.2 V x 0.75% = 9.2 mV. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 7 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com LM4041-N-xx 1.2 Electrical Characteristics (Industrial Temperature Range) (continued) All limits TA = TJ = 25C. unless otherwise specified. The grades C, D, and E designate initial reverse breakdown voltage tolerances of 0.5%, 1.0%, and 2.0%, respectively. PARAMETER MIN (1) TEST CONDITIONS LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 TA = TJ = 25C IRMIN IR 1 mA Reverse breakdown voltage change with operating current change (4) 1 mA IR 12 mA 2 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 2 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7) 2.5 eN Wideband noise IR = 100 A 10 Hz f 10 kHz VR Reverse breakdown voltage long-term stability t = 1000 hrs T = 25C 0.1C IR = 100 A VHYST Thermal hysteresis (5) T = -40C to +125C (4) (5) 8 2.5 UNIT 6 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 8 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 8 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 10 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 ZR 1.5 mV TA = TJ = TMIN to TMAX IR = 1 mA, f = 120 Hz IAC = 0.1 IR 0.7 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 (LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 TA = TJ = 25C Reverse dynamic impedance MAX (1) mV TA = TJ = TMIN to TMAX VR/IR TYP (2) 0.5 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041EIM3, LM4041QEIM3, LM4041EIZ, LM4041EIM7 1.5 2 20 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Ouput changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the +25C measurement after cycling to temperature +125C. Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 6.7 LM4041-N-xx 1.2 Electrical Characteristics (Extended Temperature Range) All limits TA = TJ = 25C, unless otherwise specified. The grades C, D, and E designate initial reverse breakdown voltage tolerance of 0.5%, 1.0%, and 2.0% respectively. PARAMETER Reverse breakdown voltage IR = 100 A Reverse breakdown voltage error (3) IR = 100 A TA = TJ = TMIN to TMAX TA = TJ = 25C Minimum operating current LM4041EEM3, LM4041QEEM3 LM4041DEM3, LM4041QDEM3 12 LM4041EEM3, LM4041QEEM3 25 LM4041CEM3, LM4041QCEM3 18.4 LM4041DEM3, LM4041QDEM3 31 LM4041EEM3, LM4041QEEM3 43 (2) (3) 45 60 65 LM4041CEM3, LM4041QCEM3 68 LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 73 A 20 15 LM4041CEM3, LM4041QCEM3 IR = 1 mA TA = TJ = TMIN to TMAX 100 ppm/C LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 LM4041EEM3, LM4041QEEM3 (1) mV LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 TA = TJ = 25C VR temperature coefficient (3) UNIT V 6 LM4041EEM3, LM4041QEEM3 VR/T MAX (1) LM4041CEM3, LM4041QCEM3 LM4041CEM3, LM4041QCEM3 IRMIN TYP (2) 1.225 TA = TJ = 25C VR MIN (1) TEST CONDITIONS 150 15 Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. The overtemperature limit for reverse breakdown voltage tolerance is defined as the room temperature reverse breakdown voltage tolerance [(VRT)(max T)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25 C to T MAX or TMIN, and VR is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total over-temperature tolerance for the different grades in the extended temperature range where max T = 100 C is shown below: B-grade: 1.2% = 0.2% 100 ppm/C x 100C C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 4.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade LM4041-N 1.2 has an over-temperature reverse breakdown voltage tolerance of 1.2 V x 0.75% = 9.2 mV. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 9 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com LM4041-N-xx 1.2 Electrical Characteristics (Extended Temperature Range) (continued) All limits TA = TJ = 25C, unless otherwise specified. The grades C, D, and E designate initial reverse breakdown voltage tolerance of 0.5%, 1.0%, and 2.0% respectively. PARAMETER MIN (1) TEST CONDITIONS LM4041CEM3, LM4041QCEM3 TA = TJ = 25C IRMIN IR 1.0 mA LM4041EEM3, LM4041QEEM3 VR/IR Reverse breakdown change with current (4) 1 mA IR 12 mA LM4041EEM3, LM4041QEEM3 Reverse dynamic impedance IR = 1 mA, f = 120 Hz, IAC= 0.1 IR eN Noise voltage IR = 100 A 10 Hz f 10 kHz VR Long-term stability (noncumulative) t = 1000 hrs T = 25C 0.1C IR = 100 A VHYST Thermal hysteresis (5) T = -40C to +125C (4) (5) 10 0.7 1.5 2 LM4041CEM3, LM4041QCEM3 2 LM4041DEM3, LM4041QDEM3 M4041EEM3, LM4041QEEM3 2.5 2.5 6 LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 8 LM4041CEM3, LM4041QCEM3 8 LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 10 mV 0.5 LM4041CEM3, LM4041QCEM3 TA = TJ = TMIN to TMAX UNIT mV TA = TJ = 25C ZR MAX (1) LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 LM4041CEM3, LM4041QCEM3 LM4041EEM3, LM4041QEEM3 TYP (2) 1.5 LM4041DEM3, LM4041QDEM3 LM4041EEM3, LM4041QEEM3 2 20 Vrms 120 ppm 0.08% Load regulation is measured on pulse basis from no load to the specified load current. Ouput changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the +25C measurement after cycling to temperature +125C. Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 6.8 LM4041-N-xx ADJ (Adjustable) Electrical Characteristics (Industrial Temperature Range) All limits TJ = 25C, unless otherwise specified (SOT-23, see (1)), IRMIN IR 12 mA, VREF VOUT 10 V. The grades C and D designate initial Reference Voltage Tolerances of 0.5% and 1%, respectively for VOUT = 5 V. PARAMETER Reference voltage IR = 100 A, VOUT = 5 V Reference voltage tolerance (4) IR = 100 A, VOUT = 5 V TA = TJ = TMIN to TMAX Minimum operating current TA = TJ = TMIN to TMAX TJ = 25C IRMIN IR 1 mA SOT-23: VOUT 1.6 V (1) VREF/IR TA = TJ = TMIN to TMAX Reference voltage change with operating current change (5) TJ = 25C 1 mA IR 12 mA SOT-23: VOUT 1.6 V (1) TA = TJ = TMIN to TMAX VREF/VO IFB Reference voltage change with output voltage change Feedback current TJ = 25C IR = 1 mA TA = TJ = TMIN to TMAX LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 12 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 14 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 24 (2) (3) (4) (5) 45 60 65 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 65 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 70 A 0.7 1.5 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 2 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 2 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 2.5 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 mV 2 4 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 6 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 6 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 8 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 mV -1.55 -2 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 -2.5 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 -2.5 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 -3 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 TA = TJ = TMIN to TMAX (1) mV LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 UNIT V 6.2 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 TJ = 25C MAX (2) LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 TJ = 25C IRMIN TYP (3) 1.233 TJ = 25C VREF MIN (2) TEST CONDITIONS mV/V 60 100 150 nA 120 When VOUT 1.6 V, the LM4041-N ADJ in the SOT-23 package must operate at reduced IR. This is caused by the series resistance of the die attach between the die (-) output and the package (-) output pin. See the Output Saturation (SOT-23 only) curve in the Typical Characteristics section. Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. Reference voltage and temperature coefficient will change with output voltage. See Typical Characteristics curves. Load regulation is measured on pulse basis from no load to the specified load current. Ouput changes due to die temperature change must be taken into account separately. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 11 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com LM4041-N-xx ADJ (Adjustable) Electrical Characteristics (Industrial Temperature Range) (continued) All limits TJ = 25C, unless otherwise specified (SOT-23, see(1)), IRMIN IR 12 mA, VREF VOUT 10 V. The grades C and D designate initial Reference Voltage Tolerances of 0.5% and 1%, respectively for VOUT = 5 V. PARAMETER MIN (2) TEST CONDITIONS IR = 10 mA VREF/T VOUT = 5 V IR = 1 mA ZOUT eN Wideband noise VOUT = VREF IR = 100 A 10 Hz f 10 kHz VREF Reference voltage long-term stability t = 1000 hrs, IR = 100 A, T = 25C 0.1C VHYST Thermal hysteresis (6) T = -40C to +125C (6) 12 UNIT TA = TJ = TMIN to TMAX 15 LM4041CIM3, LM4041QCIM3, LM4041CIZ, LM4041CIM7 100 LM4041DIM3, LM4041QDIM3, LM4041DIZ, LM4041DIM7 150 IR = 100 A Dynamic output impedance MAX (2) 20 TJ = 25C Average reference voltage temperature coefficient (4) TYP (3) ppm/C 15 IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 VOUT = VREF VOUT = 10 V 2 20 Vrms 120 ppm 0.08% Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the +25C measurement after cycling to temperature +125C. Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 6.9 LM4041-N-xx ADJ (Adjustable) Electrical Characteristics (Extended Temperature Range) All limits TJ = 25C, unless otherwise specified (SOT-23, see (1)), IRMIN IR 12 mA, VREF VOUT 10 V. The grades C and D designate initial Reference Voltage Tolerances of 0.5% and 1%, respectively for VOUT = 5 V. PARAMETER Reference voltage Reference voltage tolerance (4) IR = 100 A, VOUT = 5V TJ = 25C Minimum operating current TA = TJ = TMIN to TMAX 6.2 LM4041DEM3, LM4041QDEM3 12 LM4041CEM3, LM4041QCEM3 18 LM4041DEM3, LM4041QDEM3 30 45 65 LM4041CEM3, LM4041QCEM3 68 LM4041DEM3, LM4041QDEM3 VREF/IR TJ = 25C Reference voltage change with output voltage change 2 LM4041CEM3, LM4041QCEM3 2 mV TA = TJ = TMIN to TMAX LM4041DEM3, LM4041QDEM3 2.5 TJ = 25C 2 8 LM4041DEM3, LM4041QDEM3 10 LM4041CEM3, LM4041QCEM3 6 mV TA = TJ = TMIN to TMAX LM4041DEM3, LM4041QDEM3 8 TJ = 25C IR = 1 mA -1.55 -2 LM4041DEM3, LM4041QDEM3 -2.5 LM4041CEM3, LM4041QCEM3 -3 mV/V TA = TJ = TMIN to TMAX LM4041DEM3, LM4041QDEM3 -4 LM4041CEM3, LM4041QCEM3 TJ = 25C IFB 1.5 LM4041DEM3, LM4041QDEM3 LM4041CEM3, LM4041QCEM3 VREF/VO 60 100 LM4041DEM3, LM4041QDEM3 150 LM4041CEM3, LM4041QCEM3 120 Feedback current nA TA = TJ = TMIN to TMAX LM4041DEM3, LM4041QDEM3 200 IR = 10 mA VREF/T Average reference voltage temperature coefficient (4) A 73 0.7 LM4041CEM3, LM4041QCEM3 1 mA IR 12 mA SOT-23: VOUT 1.6 V (1) 60 LM4041DEM3, LM4041QDEM3 LM4041CEM3, LM4041QCEM3 Reference voltage change with operating current change (5) UNIT V LM4041CEM3, LM4041QCEM3 LM4041CEM3, LM4041QCEM3 IRMIN IR 1 mA SOT-23: VOUT 1.6 V (1) MAX (2) mV TA = TJ = TMIN to TMAX IRMIN TYP (3) 1.233 TJ = 25C VREF MIN (2) TEST CONDITIONS IR = 100 A, VOUT = 5 V 20 TJ = 25C VOUT = 5 V, IR = 1 mA TA = TJ = TMIN to TMAX 15 LM4041CEM3, LM4041QCEM3 100 LM4041DEM3, LM4041QDEM3 150 IR = 100 A ppm/C 15 IR = 1 mA, f = 120 Hz, Dynamic output impedance ZOUT IAC = 0.1 IR 0.3 VOUT = 10 V IR = 100 A, VOUT = VREF eN Wideband noise VREF Reference voltage long-term stability t = 1000 hrs, IR = 100 A, T = 25C 0.1C VHYST Thermal hysteresis (6) T = -40C to +125C (1) (2) (3) (4) (5) (6) VOUT = VREF 10 Hz f 10 kHz 2 20 Vrms 120 ppm 0.08% When VOUT 1.6 V, the LM4041-N ADJ in the SOT-23 package must operate at reduced IR. This is caused by the series resistance of the die attach between the die (-) output and the package (-) output pin. See the Output Saturation (SOT-23 only) curve in the Typical Characteristics section. Limits are 100% production tested at 25C. Limits over temperature are ensured through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate AOQL. Typicals are at TJ = 25C and represent most likely parametric norm. Reference voltage and temperature coefficient will change with output voltage. See Typical Characteristics curves. Load regulation is measured on pulse basis from no load to the specified load current. Ouput changes due to die temperature change must be taken into account separately. Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the +25C measurement after cycling to temperature +125C. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 13 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com 6.10 Typical Characteristics 14 Figure 1. Temperature Drift for Different Average Temperature Coefficient Figure 2. Output Impedance vs Frequency Figure 3. Noise Voltage Figure 4. Reverse Characteristics and Minimum Operating Current Figure 5. Start-Up Characteristics Figure 6. Reference Voltage vs Output Voltage and Temperature Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 Typical Characteristics (continued) Figure 7. Reference Voltage vs Temperature and Output Voltage Figure 8. Feedback Current vs Output Voltage and Temperature Figure 9. Output Saturation (SOT-23 Only) Figure 10. Output Impedance vs Frequency Figure 11. Output Impedance vs Frequency Figure 12. Reverse Characteristics Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 15 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com Typical Characteristics (continued) Figure 13. Large Signal Response 16 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 7 Parameter Measurement Information Figure 14. Adjustable Output Test Circuit Figure 15. Line Transient Test Circuit Figure 16. Start-Up and Shutdown Test Circuit 8 Detailed Description 8.1 Overview The LM4041 is a precision micro-power shunt voltage reference available in both a fixed and output voltage and adjustable output voltage options. The part has three different packages available to meet small footprint requirements. It is also available in five different tolerance grades. 8.2 Functional Block Diagram *LM4041-N ADJ only **LM4041-N 1.2 only 8.3 Feature Description The LM4041 is effectively a precision Zener diode. The part requires a small quiescent current for regulation, and regulates the output voltage by shunting more or less current to ground, depending on input voltage and load. The only external component requirement is a resistor between the cathode and the input voltage to set the input current. An external capacitor can be used on the input or output, but is not required. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 17 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com 8.4 Device Functional Modes The LM4041 has fixed output voltage options as well as adjustable output voltage options. The fixed output parts can only be used in closed-loop operation, as the feedback is internal. The adjustable option parts are most commonly operated in closed-loop mode, where the feedback node is tied to the output voltage through a resistor divider. The output voltage will remain as long as lR is between lRMIN and lRMAX; see LM4041-N-xx 1.2 Electrical Characteristics (Industrial Temperature Range). This part can also be used in open-loop mode to act as a comparator, driving the feedback node from another voltage source. 18 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 9 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI's customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality. 9.1 Application Information The LM4041-N is a precision micro-power curvature-corrected bandgap shunt voltage reference. For spacecritical applications, the LM4041-N is available in the sub-miniature SOT-23 and SC70 surface-mount package. The LM4041-N has been designed for stable operation without the need of an external capacitor connected between the + pin and the - pin. If, however, a bypass capacitor is used, the LM4041-N remains stable. Design effort is further reduced with the choice of either a fixed 1.2 V or an adjustable reverse breakdown voltage. The minimum operating current is 60 A for the LM4041-N 1.2 V and the LM4041-N ADJ. Both versions have a maximum operating current of 12 mA. LM4041-Ns using the SOT-23 package have pin 3 connected as the (-) output through the die attach interface of the package. Therefore, pin 3 of the LM4041-N 1.2 must be left floating or connected to pin 2 and pin 3 of the LM4041-N ADJ pinout. The LM4041-N devices using the SC70 package have pin 2 connected as the (-) output through the die attach interface of the package. Therefore, the LM4041-N pin 2 of the LM4041-N 1.2 must be left floating or connected to pin 1, and the pin 2 of the LM4041-N ADJ is the (-) output. The typical thermal hysteresis specification is defined as the change in 25C voltage measured after thermal cycling. The device is thermal cycled to temperature -40C and then measured at +25C. Next the device is thermal cycled to temperature 125C and again measured at 25C. The resulting VOUT delta shift between the 25C measurements is thermal hysteresis. Thermal hysteresis is common in precision references and is induced by thermal-mechanical package stress. Changes in environmental storage temperature, operating temperature and board mounting temperature are all factors that can contribute to thermal hysteresis. In a conventional shunt regulator application (Figure 17), an external series resistor (RS) is connected between the supply voltage and the LM4041-N. RS determines the current that flows through the load (IL) and the LM4041-N (IQ). Because load current and supply voltage may vary, RS must be small enough to supply at least the minimum acceptable IQ to the LM4041-N even when the supply voltage is at its minimum and the load current is at its maximum value. When the supply voltage is at its maximum and IL is at its minimum, RS must be large enough so that the current flowing through the LM4041-N is less than 12 mA. RS must be selected based on the supply voltage, (VS), the desired load and operating current, (IL and IQ), and the reverse breakdown voltage of the LM4041-N, VR. (1) The output voltage of the LM4041-N SDJ can be adjusted to any value in the range of 1.24 V through 10 V. It is a function of the internal reference voltage (VREF) and the ratio of the external feedback resistors as shown in Figure 19 . The output voltage is found using Equation 2. VO = VREF[(R2/R1) + 1] where * VO is the output voltage. (2) The actual value of the internal VREF is a function of VO. The corrected VREF is determined by Equation 3. VREF = VO (VREF/VO) + VY where * * VY = 1.240 V and VO = (VO - VY) (3) Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 19 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com Application Information (continued) VREF/VO is found in the electrical characteristics tables in the Specifications and is typically -1.55 mV/V. You can get a more accurate indication of the output voltage by replacing the value of VREF in Equation 2 with the value found using Equation 3. NOTE The actual output voltage can deviate from that predicted using the typical value of VREF / VO in Equation 3. For C-grade parts, the worst-case VREF / VO is -2.5 mV/V. For D-grade parts, the worst-case VREF / VO is -3.0 mV/V. 9.2 Typical Applications 9.2.1 Shunt Regulator Figure 17. Shunt Regulator 9.2.1.1 Design Requirements VIN > VOUT Select RS with Equation 4. lRMIN < lR < lRMAX = 15 mA (4) See the electrical characteristics tables in the Specifications for minimum operating current for each voltage option and grade. 9.2.1.2 Detailed Design Procedure The resistor RS must be selected such that current lR remains in the operational region of the part for the entire VIN range and load current range. At its maximum, the RS must be small enough for lR to remain above lRMN. The other extreme is when VIN at its maximum and the load at its minimum; the RS must be large enough to maintain lR < lRMAX. If unsure, try using 0.1 mA lR 1 mA as starting point. Just remember the value of lR varies with input and voltage load. Use equations Equation 5 and Equation 6 to set RS between RS_MIN and RS_MAX. VIN _ MAX - VOUT RS _ MIN = ILOAD _ MIN + IR _ MAX RS _ MAX = 20 (5) VIN _ MIN - VOUT ILOAD _ MAX + IR _ MIN Submit Documentation Feedback (6) Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 Typical Applications (continued) 9.2.1.3 Application Curve Figure 18. Reverse Characteristics and Minimum Operating Current 9.2.2 Adjustable Shunt Regulator VO = VREF[(R2/R1) + 1] Figure 19. Adjustable Shunt Regulator 9.2.2.1 Design Requirements VIN > VOUT VOUT = 2.5 V Select RS with Equation 7. lRMIN < LR < lRMAX where * lRMAX = 15 mA (7) See the electrical characteristics tables in the Specifications for minimum operating current for each voltage option and grade. 9.2.2.2 Detail Design Procedure Select a value of RS based on the same method shown in Detailed Design Procedure. Set feedback resistors R1 and R2 for a resistor divider on the equation shown in Application Information that is reproduced here as Equation 8. VOUT + VREF x ((R2/R1)+1) (8) So, for a 2.5-V reference, of VREF is 1.24 V, then R2/R1 = 1.01. Select R2= 1.01 k and R1= 1.0 k. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 21 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com Typical Applications (continued) 9.2.3 Bounded Amplifier Bounded amplifier reduces saturation-induced delays and can prevent succeeding stage damage. Nominal clamping voltage is VO (the reverse breakdown voltage of the LM4041-N) +2 diode VF. Figure 20. Bounded Amplifier 9.2.3.1 Design Requirements Design an amplifier with output clamped at 11.5 V. 9.2.3.2 Detail Design Procedure With amplifier rails of 15 V, the output can be bound to 11.5 V with the LM4041 adjustable set for 10 V and two nominal diode voltage drops of 0.7 V. VOUTBOUND = 2 x VFWD + VZ VOUTBOUND = 1.4 V + 10 V (9) (10) Select RS = 15 k to keep LR low. Calculate LR to confirm RS selection. Use Equation 11, but in this case, take the negative supply into account. lR = (VIN - VOUT) /R lR = (VIN+ - VIN - VOUT) / R = (30 V - 10 V) / (RS1 + RS2) = 20 V / 30 k = 0.667 mA (11) (12) This is an acceptable value for lR that does not draw excessive current, but prevents the part from being starved for current. 22 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 Typical Applications (continued) 9.2.3.3 Application Curve Figure 21. Reverse Characteristics 9.2.4 Voltage Level Detector Figure 22. Voltage Level Detector Figure 23. Voltage Level Detector 9.2.4.1 Design Procedure Turn on an LED when voltage is above or below -12 V. 9.2.4.2 Detail Design Procedure Use the LM4041 in an open-loop configuration, where the feedback node is tied to a voltage divider driven by the input signal. The voltage divider is set such that when the input signal is at -12 V, the feedback node is -1.24 V. The high gain of the LM4041 will enable it to act like a comparator. 9.2.5 Precision Current Sink and Source Figure 24. Precision 1-A to 1-mA Current Sink Figure 25. Precision 1-A to 1-mA Current Sources Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 23 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com 9.2.5.1 Design Requirements Create precision 1-mA current sink and 1-mA current source. 9.2.5.2 Detailed Design Procedure Set R1 such that the current through the shunt reference, lR, is greater than lRMIN. lOUT = VOUT / R2 where * VOUT is the voltage drop across the shunt reference (13) In this case, lOUT = 1.2 / R2. 9.2.6 100-mA Current Source *D1 can be any LED, VF = 1.5 V to 2.2 V at 3 mA. D1 may act as an indicator. D1 will be on if ITHRESHOLD falls below the threshold current, except with I = 0. Figure 26. Current Source 9.2.6.1 Design Requirements Create 100-mA current source. 9.2.6.2 Detailed Design Procedure lOUT = VOUT / R1 where * VOUT is the voltage drop across the shunt reference. (14) In this case, lOUT = 1.24 / R1. 24 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 9.2.7 LM4041 in Clamp Circuits Figure 27. Fast Positive Clamp 2.4 V + VD1 Figure 28. Bidirectional Clamp 2.4 V Figure 29. Bidirectional Adjustable Clamp 18 V to 2.4 V Figure 30. Bidirectional Adjustable Clamp 2.4 V to 6 V 9.2.7.1 Design Requirements Create adjustable clamping circuits using the LM4041. 9.2.7.2 Detailed Design Procedure Use the LM4041 in open-loop, as a 1.24-V diode that can be on or off based on the voltage at the feedback. See Figure 27 through Figure 30 for examples. Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 25 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com 9.2.8 Floating Current Detector Figure 31. Simple Floating Current Detector Figure 32. Precision Floating Current Detector 9.2.8.1 Design Requirement Create a floating current detector using the LM4041. 9.2.8.2 Detailed Design Procedure Use the LM4041 as a voltage dependent diode, which turns on and off based on the voltage drop across R1. See Figure 31 and Figure 32 for examples. 26 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 LM4041-N, LM4041-N-Q1 www.ti.com SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 10 Power Supply Recommendations While a bypass capacitor is not required on the input voltage line, TI recommends reducing noise on the input which could affect the output. A 0.1-F ceramic capacitor or larger is recommended. 11 Layout 11.1 Layout Guidelines Place external components as close to the device as possible. Place RS close the cathode, as well as the input bypass capacitor, if used. Keep feedback resistor close the device whenever possible. 11.2 Layout Example Figure 33. Recommended Layout Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 Submit Documentation Feedback 27 LM4041-N, LM4041-N-Q1 SNOS641G - OCTOBER 1999 - REVISED JANUARY 2016 www.ti.com 12 Device and Documentation Support 12.1 Related Links The table below lists quick access links. Categories include technical documents, support and community resources, tools and software, and quick access to sample or buy. Table 1. Related Links PARTS PRODUCT FOLDER SAMPLE & BUY TECHNICAL DOCUMENTS TOOLS & SOFTWARE SUPPORT & COMMUNITY LM4041-N Click here Click here Click here Click here Click here LM4041-N-Q1 Click here Click here Click here Click here Click here 12.2 Community Resources The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. TI E2ETM Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help solve problems with fellow engineers. Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and contact information for technical support. 12.3 Trademarks E2E is a trademark of Texas Instruments. All other trademarks are the property of their respective owners. 12.4 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 12.5 Glossary SLYZ022 -- TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 13 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 28 Submit Documentation Feedback Copyright (c) 1999-2016, Texas Instruments Incorporated Product Folder Links: LM4041-N LM4041-N-Q1 PACKAGE OPTION ADDENDUM www.ti.com 9-Mar-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4041AIM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 R1A LM4041AIM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1A LM4041AIM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1A LM4041AIZ-1.2/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 4041A IZ1.2 LM4041BIM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 R1B LM4041BIM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1B LM4041BIM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1B LM4041BIM7-1.2 NRND SC70 DCK 5 1000 TBD Call TI Call TI -40 to 85 R1B LM4041BIM7-1.2/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1B LM4041BIM7X-1.2/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1B LM4041BIZ-1.2/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 4041B IZ1.2 LM4041CEM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 R1C LM4041CEM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R1C LM4041CEM3-ADJ NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 RAC LM4041CEM3-ADJ/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RAC LM4041CEM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R1C LM4041CEM3X-ADJ NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 125 RAC LM4041CEM3X-ADJ/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RAC LM4041CIM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 R1C LM4041CIM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1C Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 9-Mar-2018 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4041CIM3-ADJ NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 RAC LM4041CIM3-ADJ/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAC LM4041CIM3X-1.2 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 85 R1C LM4041CIM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1C LM4041CIM3X-ADJ/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAC LM4041CIM7-1.2/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1C LM4041CIM7-ADJ NRND SC70 DCK 5 1000 TBD Call TI Call TI -40 to 85 RAC LM4041CIM7-ADJ/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAC LM4041CIM7X-1.2/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1C LM4041CIM7X-ADJ/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAC LM4041CIZ-1.2/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 4041C IZ1.2 LM4041CIZ-ADJ/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 4041C IZADJ LM4041DEM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R1D LM4041DEM3-ADJ NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 RAD LM4041DEM3-ADJ/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RAD LM4041DEM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R1D LM4041DEM3X-ADJ/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RAD LM4041DIM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 R1D LM4041DIM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1D LM4041DIM3-ADJ NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 RAD Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 9-Mar-2018 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4041DIM3-ADJ/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAD LM4041DIM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1D LM4041DIM3X-ADJ NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 85 RAD LM4041DIM3X-ADJ/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAD LM4041DIM7-1.2/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1D LM4041DIM7-ADJ/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAD LM4041DIM7X-1.2/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1D LM4041DIM7X-ADJ/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RAD LM4041DIZ-1.2/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 4041D IZ1.2 LM4041DIZ-ADJ/LFT1 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type LM4041DIZ-ADJ/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 4041D IZADJ LM4041EEM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 R1E LM4041EEM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R1E 4041D IZADJ LM4041EEM3X-1.2 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 125 R1E LM4041EEM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 R1E LM4041EIM3-1.2 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 85 R1E LM4041EIM3-1.2/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1E LM4041EIM3X-1.2/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1E LM4041EIM7-1.2/NOPB ACTIVE SC70 DCK 5 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1E LM4041EIM7X-1.2/NOPB ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 R1E Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 9-Mar-2018 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM4041QAIM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RQA LM4041QBIM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 RQB LM4041QCEM3-1.2NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQC LM4041QCEM3-ADJ/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RZC LM4041QCEM3X-1.2NO ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQC LM4041QCIM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQC LM4041QCIM3-ADJ/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RZC LM4041QDEM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQD LM4041QDEM3-ADJ/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RZD LM4041QDIM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQD LM4041QDIM3-ADJ/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RZD LM4041QEEM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQE LM4041QEEM3X-1.2NO ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQE LM4041QEIM3-1.2/NO ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 RQE (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 4 Samples PACKAGE OPTION ADDENDUM www.ti.com 9-Mar-2018 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LM4041-N, LM4041-N-Q1 : * Catalog: LM4041-N * Automotive: LM4041-N-Q1 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2017 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) LM4041AIM3-1.2 SOT-23 DBZ 3 1000 178.0 8.4 LM4041AIM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 LM4041AIM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 8.4 3.3 2.9 1.22 4.0 8.0 Q3 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041BIM3-1.2 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041BIM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041BIM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041BIM7-1.2 SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041BIM7-1.2/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041BIM7X-1.2/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041CEM3-1.2 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CEM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CEM3-ADJ/NOPB SOT-23 LM4041CEM3-ADJ DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CEM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CEM3X-ADJ LM4041CEM3X-ADJ/NOP B LM4041CIM3-1.2 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2017 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) LM4041CIM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 LM4041CIM3-ADJ SOT-23 DBZ 3 1000 178.0 8.4 LM4041CIM3-ADJ/NOPB SOT-23 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 3.3 2.9 1.22 4.0 8.0 Q3 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CIM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CIM3X-ADJ/NOP B SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041CIM7-1.2/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041CIM3X-1.2 LM4041CIM7-ADJ SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041CIM7-ADJ/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041CIM7X-1.2/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041CIM7X-ADJ/NOP B SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041DEM3-1.2/NOPB SOT-23 LM4041DEM3-ADJ DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DEM3-ADJ/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DEM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DEM3X-ADJ/NOP B SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DIM3-1.2 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DIM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DIM3-ADJ SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DIM3-ADJ/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DIM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041DIM7-1.2/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041DIM3X-ADJ LM4041DIM3X-ADJ/NOP B LM4041DIM7-ADJ/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041DIM7X-1.2/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041DIM7X-ADJ/NOP B SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041EEM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041EEM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041EEM3-1.2 LM4041EEM3X-1.2 LM4041EIM3-1.2 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041EIM3-1.2/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041EIM3X-1.2/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041EIM7-1.2/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041EIM7X-1.2/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM4041QAIM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QBIM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QCEM3-1.2NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2017 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM4041QCEM3-ADJ/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QCEM3X-1.2NO SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QCIM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QCIM3-ADJ/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QDEM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QDEM3-ADJ/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QDIM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QDIM3-ADJ/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QEEM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QEEM3X-1.2NO SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM4041QEIM3-1.2/NO SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4041AIM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041AIM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041AIM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041BIM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041BIM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041BIM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 Pack Materials-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2017 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4041BIM7-1.2 SC70 DCK 5 1000 210.0 185.0 35.0 LM4041BIM7-1.2/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4041BIM7X-1.2/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4041CEM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CEM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CEM3-ADJ SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CEM3-ADJ/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CEM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041CEM3X-ADJ SOT-23 DBZ 3 3000 210.0 185.0 35.0 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041CEM3X-ADJ/NOP B LM4041CIM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CIM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CIM3-ADJ SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CIM3-ADJ/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041CIM3X-1.2 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041CIM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041CIM3X-ADJ/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041CIM7-1.2/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4041CIM7-ADJ SC70 DCK 5 1000 210.0 185.0 35.0 LM4041CIM7-ADJ/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4041CIM7X-1.2/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4041CIM7X-ADJ/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4041DEM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DEM3-ADJ SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DEM3-ADJ/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DEM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041DEM3X-ADJ/NOP B SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041DIM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DIM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DIM3-ADJ SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DIM3-ADJ/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041DIM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041DIM3X-ADJ SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041DIM3X-ADJ/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041DIM7-1.2/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4041DIM7-ADJ/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4041DIM7X-1.2/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4041DIM7X-ADJ/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4041EEM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041EEM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041EEM3X-1.2 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041EEM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 Pack Materials-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2017 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM4041EIM3-1.2 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041EIM3-1.2/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041EIM3X-1.2/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041EIM7-1.2/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM4041EIM7X-1.2/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM4041QAIM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QBIM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QCEM3-1.2NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QCEM3-ADJ/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QCEM3X-1.2NO SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041QCIM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QCIM3-ADJ/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QDEM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QDEM3-ADJ/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QDIM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QDIM3-ADJ/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QEEM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM4041QEEM3X-1.2NO SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM4041QEIM3-1.2/NO SOT-23 DBZ 3 1000 210.0 185.0 35.0 Pack Materials-Page 5 PACKAGE OUTLINE LP0003A TO-92 - 5.34 mm max height SCALE 1.200 SCALE 1.200 TO-92 5.21 4.44 EJECTOR PIN OPTIONAL 5.34 4.32 (1.5) TYP SEATING PLANE (2.54) NOTE 3 2X 4 MAX (0.51) TYP 6X 0.076 MAX SEATING PLANE 2X 2.6 0.2 3X 12.7 MIN 3X 3X 0.55 0.38 0.43 0.35 2X 1.27 0.13 FORMED LEAD OPTION STRAIGHT LEAD OPTION OTHER DIMENSIONS IDENTICAL TO STRAIGHT LEAD OPTION 3X 2.67 2.03 4.19 3.17 3 2 1 3.43 MIN 4215214/B 04/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Lead dimensions are not controlled within this area. 4. Reference JEDEC TO-226, variation AA. 5. Shipping method: a. Straight lead option available in bulk pack only. b. Formed lead option available in tape and reel or ammo pack. c. Specific products can be offered in limited combinations of shipping medium and lead options. d. Consult product folder for more information on available options. www.ti.com EXAMPLE BOARD LAYOUT LP0003A TO-92 - 5.34 mm max height TO-92 0.05 MAX ALL AROUND TYP FULL R TYP METAL TYP (1.07) 3X ( 0.85) HOLE 2X METAL (1.5) 2X (1.5) 2 1 (R0.05) TYP 3 2X (1.07) (1.27) SOLDER MASK OPENING 2X SOLDER MASK OPENING (2.54) LAND PATTERN EXAMPLE STRAIGHT LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 0.05 MAX ALL AROUND TYP ( 1.4) 2X ( 1.4) METAL 3X ( 0.9) HOLE METAL (R0.05) TYP 2 1 (2.6) SOLDER MASK OPENING 3 2X SOLDER MASK OPENING (5.2) LAND PATTERN EXAMPLE FORMED LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 4215214/B 04/2017 www.ti.com TAPE SPECIFICATIONS LP0003A TO-92 - 5.34 mm max height TO-92 13.7 11.7 32 23 (2.5) TYP 0.5 MIN 16.5 15.5 11.0 8.5 9.75 8.50 19.0 17.5 6.75 5.95 2.9 TYP 2.4 3.7-4.3 TYP 13.0 12.4 FOR FORMED LEAD OPTION PACKAGE 4215214/B 04/2017 www.ti.com 4203227/C PACKAGE OUTLINE DBZ0003A SOT-23 - 1.12 mm max height SCALE 4.000 SMALL OUTLINE TRANSISTOR C 2.64 2.10 1.4 1.2 PIN 1 INDEX AREA 1.12 MAX B A 0.1 C 1 0.95 3.04 2.80 1.9 3X 3 0.5 0.3 0.2 2 (0.95) C A B 0.25 GAGE PLANE 0 -8 TYP 0.10 TYP 0.01 0.20 TYP 0.08 0.6 TYP 0.2 SEATING PLANE 4214838/C 04/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Reference JEDEC registration TO-236, except minimum foot length. www.ti.com EXAMPLE BOARD LAYOUT DBZ0003A SOT-23 - 1.12 mm max height SMALL OUTLINE TRANSISTOR PKG 3X (1.3) 1 3X (0.6) SYMM 3 2X (0.95) 2 (R0.05) TYP (2.1) LAND PATTERN EXAMPLE SCALE:15X SOLDER MASK OPENING METAL SOLDER MASK OPENING METAL UNDER SOLDER MASK 0.07 MIN ALL AROUND 0.07 MAX ALL AROUND NON SOLDER MASK DEFINED (PREFERRED) SOLDER MASK DEFINED SOLDER MASK DETAILS 4214838/C 04/2017 NOTES: (continued) 4. Publication IPC-7351 may have alternate designs. 5. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com EXAMPLE STENCIL DESIGN DBZ0003A SOT-23 - 1.12 mm max height SMALL OUTLINE TRANSISTOR PKG 3X (1.3) 1 3X (0.6) SYMM 3 2X(0.95) 2 (R0.05) TYP (2.1) SOLDER PASTE EXAMPLE BASED ON 0.125 THICK STENCIL SCALE:15X 4214838/C 04/2017 NOTES: (continued) 6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 7. Board assembly site may have different recommendations for stencil design. www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2018, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: LM4041AIM3-1.2 LM4041AIM3-1.2/NOPB LM4041AIM3X-1.2/NOPB LM4041BIM3-1.2 LM4041BIM3-1.2/NOPB LM4041BIM3X-1.2/NOPB LM4041BIM7-1.2 LM4041BIM7-1.2/NOPB LM4041BIM7X-1.2 LM4041BIM7X-1.2/NOPB LM4041CEM3-1.2 LM4041CEM3-1.2/NOPB LM4041CEM3-ADJ LM4041CEM3-ADJ/NOPB LM4041CEM3X1.2/NOPB LM4041CEM3X-ADJ LM4041CEM3X-ADJ/NOPB LM4041CIM3-1.2 LM4041CIM3-1.2/NOPB LM4041CIM3-ADJ LM4041CIM3-ADJ/NOPB LM4041CIM3X-1.2 LM4041CIM3X-1.2/NOPB LM4041CIM3X-ADJ LM4041CIM3X-ADJ/NOPB LM4041CIM7-1.2/NOPB LM4041CIM7-ADJ LM4041CIM7-ADJ/NOPB LM4041CIM7X1.2/NOPB LM4041CIM7X-ADJ LM4041CIM7X-ADJ/NOPB LM4041CIZ-1.2/NOPB LM4041DEM3-1.2/NOPB LM4041DEM3-ADJ LM4041DEM3-ADJ/NOPB LM4041DEM3X-1.2/NOPB LM4041DEM3X-ADJ/NOPB LM4041DIM31.2 LM4041DIM3-1.2/NOPB LM4041DIM3-ADJ LM4041DIM3-ADJ/NOPB LM4041DIM3X-1.2 LM4041DIM3X1.2/NOPB LM4041DIM3X-ADJ LM4041DIM3X-ADJ/NOPB LM4041DIM7-1.2/NOPB LM4041DIM7-ADJ/NOPB LM4041DIM7X-1.2/NOPB LM4041DIM7X-ADJ/NOPB LM4041DIZ-ADJ/LFT1 LM4041DIZ-ADJ/NOPB LM4041EEM31.2 LM4041EEM3-1.2/NOPB LM4041EEM3X-1.2 LM4041EEM3X-1.2/NOPB LM4041EIM3-1.2 LM4041EIM31.2/NOPB LM4041EIM3X-1.2 LM4041EIM3X-1.2/NOPB LM4041EIM7-1.2 LM4041EIM7-1.2/NOPB LM4041EIM7X1.2/NOPB LM4041BIZ-1.2/NOPB LM4041CIZ-ADJ/NOPB LM4041AIZ-1.2/NOPB LM4041DIZ-1.2/NOPB