(R) Preferred Heat Shrink Products SIMPLE, COMPREHENSIVE TUBING SOLUTIONS Product Type Page Number (s) FIT(R) Shrinkable Tubing Preferred Heat Shrink (R) Products FIT(R) Preferred Heat Shrink Products are made from premium compounds under the tightest manufacturing controls. This means FIT(R) will consistently have excellent physical characteristics such as low longitudinal shrinkage and wide temperature ranges while providing an elegant appearance when used alone or on OEM equipment. The FIT(R) Preferred Heat Shrink Product line consists of many different tubing types each designed with unique attributes which offer tubing solutions for the broadest possible range of applications and environments. The FIT(R) brand name is widely recognized wherever heat shrink products are used. Users prefer FIT(R) Heat Shrink Products more than any other source and ask for them by name. The entire FIT(R) heat shrink offering has been designed to make product selection and identification as simple as possible. There's nothing easier! FIT(R) part numbers are easy to remember and clearly identify shrink ratios and sizes. ***Teflon(R) is a registered trademark of E.I. DuPont Co. ***Kynar(R) is a trademark of ELF Atochem, North America, Inc. ***Viton(R) is a registered trademark of Dupont Dow Elastomers 2 To 1 Shrink Ratio, Irradiated Polyolefin - FIT-221 . . . . . . . . . 114, 115 2 To 1 Shrink Ratio, Polyolefin Bulk Pack - FIT-221B . . . . . . . . . . . 116 2 To 1 Shrink Ratio, . Highly Flame Retardant Polyolefin - FIT-221V. . . . . . . . . . . . 117 2 To 1 Shrink Ratio, Flexible Irradiated PVC - FIT-105 . . . . . . . . . . . 118 2 To 1 Shrink Ratio, Irradiated Polyolefin Ground Markers - FIT-260 . . . 119 3 To 1 Shrink Ratio, Non-Adhesive -FIT-321V . . . . . . 120 3 to 1 Shrink Ratio, Medium Wall Polyolefin - FIT-321 . . . . . . . . . . 121 4 to 1 Shrink Ratio, Irradiated Polyolefin -FIT-421. . . . 122 6 to 1 Shrink Ratio, Irradiated Polyolefin - FIT-621 . . . 123 Semi-Rigid Irradiated Polyolefin - FIT-295 . . . . . . . . 124 Surface Irradiated Polyolefin -FIT-300 . . . . . . . . . . 125 Mastic Coated Crosslinked Polyolefin - FIT-700 . . . . . 126 Adhesive-Wall Polyolefin -FIT-750. . . . . . . . . . . . . 127 Highly Flame Retardant Kynar** -FIT-350 . . . . . . . . 128 Heat/Chemical Resistance FEP Teflon* - FIT-400 . . . . 129 Heat/Chemical Resistance TFE Teflon* -FIT-500. . . . . 130 High Flexibility Irradiated Elastomer - FIT-600 . . . . . . 131 High/Low Temperature Viton*** - FIT-650 . . . . . . . 132 Abrasion Resistant Woven Fabric - FIT FABRIC. . . . . . 133 Highly Flexible Irradiated Silicone Rubber - FIT FLEX . . . . . . . . . . . . . . . 134 111 FIT(R) Devices - FIT KITS FIT(R) Minigun Cable Repair Kit - FIT MGKIT1. . . . . . . . . . . . . . . Shrinkable Tubing Assortments - FIT KITS . . . . . . . Heat Guns - FIT GUN-1 & 3. . . . . . . . . . . . . . . Flameless Butane Torch - FIT FBT-1 . . . . . . . . . . . 135 136 137 138 Molded Polyolefin End Caps. . . . . . . . . . . . . . . . . . . 139 Molded Polyolefin Boots - FIT-BOOTS . . . . . . . . . 140 FIT Shrinkable Tubing Identification System - FIT-PRINT. . . . . . . . . . 141 Shrinkable Polyolefin Repair - FIT WRAP . . . . . . . . . 142 Shrinkable Soldering Sleeve - FIT-SLV. . . . . . . . . . 143 Shrinkable Nylon Crimp Splices - FIT CRIMP . . . . . . 144 FIT(R) Shrinkable Tubing Cross Reference . . . . . . . . . 145 MARKING: Underwriters Laboratories (UL) and the Canadian Standards Association (CSA) have eliminated the surface printing requirement for both heat shrink and non-heat shrink tubing. All mandatory information, for both UL Recognized and CSA Certified tubing, will appear exclusively on the product packaging. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com (R) Preferred Heat Shrink Products SIMPLE, COMPREHENSIVE TUBING SOLUTIONS SELECTION GUIDE PROTECT ~ substrates from moisture, UV light, corrosion, oxidation, dust, chemicals, abrasion, environmental conditions, solder joints and encapsulate. BUNDLE & HOLD ~ wire harness, cable, tubing and hose dressing on OEM equipment, breakouts, bundle in small spaces, conform to odd shapes. INSULATE ~ wire terminations and connections, entire PC boards, from temperature and ambient conditions. SEAL ~ moisture protect, fill spaces/interstices, permanent or temporary, "pinching". REPAIR ~ cable splices, reinsulate, cable jackets, connections, permanent or emergency quick fix. FLEXIBILITY ~ with robotics cable, strain relief, prevent bending. 112 IDENTIFY & BEAUTIFY ~ circuit/ground indicator, color coding, organize, personalize/label, conceal mechanical attachments, improve physical appearance. IRRADIATED POLYOLEFIN FIT -221/ FIT -221B Pg. 114-116 (R) (R) General Purpose, Irradiated Polyolefin FEATURES & BENEFITS: * General purpose protection & repair * Identification & beautifying substrates * Insulation from environment * Reduced longitudinal shrinkage * Resistance to water, fungus, UV light* * Large, economical, bulk packages (FIT-221B) HIGH SHRINK RATIO MIL-DTL-23053/5C, Class 1, 2 APPLICATIONS: * General purpose insulation & repair * Wire & cable harnessing & bundling * Cable & connector protection * Wire & tubing splicing & connecting * XTRA*GUARD(R) 1 applications * Automated cutting machines (spools) CHARACTERISTICS: Shrink Ratio: 2:1 @ 121C ~ Temperature: -55C to 135C ~ Longitudinal Shrinkage: -5% ~ Size: 3/64" - 4 in ~ Packages: 4ft lengths, spools & cut pieces ~ Colors: Black, White, Clear**, *black color only **Not UL Recognized, CSA Certified Red, Yellow, Blue, Green FIT -221V Pg. 117 (R) MIL-DTL-23053/5C, Class 1, 3 ~ CSA OFT Flame Test Low Shrink Temp, Flame Retardant, Irradiated Polyolefin FEATURES & BENEFITS: * Lowest shrink temperature (90C) * Fastest recovery time * UL VW-1 & CSA OFT flame retardancy * Resistance to water, fungus, UV light* * Large, economical, bulk packages * New colors available! FIT -321 Pg. 121 MIL-DTL-23053/4D, Class 3 (R) Medium Wall, Adhesive Lined, Irradiated Polyolefin (R) (R) APPLICATIONS: * Where substrates are heat sensitive * Where reduced shrink time saves costs * Flame retardancy requirements * Industrial applications * Cable & connector protection * Automated cutting machines (spools) CHARACTERISTICS: Shrink Ratio: 2:1 @ 90C ~ Temperature: -40C to 125C ~ Longitudinal Shrinkage: -5% ~ Size: 3/64" - 2 in ~ Packages: 4ft lengths, spools & cut pieces ~ Colors: Black, White, Red, *black color only Yellow, Green, Blue FEATURES & BENEFITS: * Expanded to a 3 to 1 shrink ratio * Increased wall thickness for durability * Water resistant adhesive inner lining * Permanent bonding adhesive APPLICATIONS: * Connectorized cable repair * Water resistance & encapsulation * Environmental & outdoor protection * XTRA*GUARD(R) 1, 2 & 3 applications CHARACTERISTICS: Shrink Ratio: 3:1 @ 125C ~ Temperature: -55C to 110C ~ Longitudinal Shrinkage: -15% ~ Size: 1/8" - 1-1/2 in ~ Packages: 4ft lengths & cut pieces ~ Color: Black FIT -321V Pg. 120 CSA OFT Flame Test (R) Low Shrink Temp, Flame Retardant, Irradiated Polyolefin FEATURES & BENEFITS: * Expanded to a 3 to 1 shrink ratio * Lowest shrink temperature (90C) * Fastest recovery time * Reduced wall thickness * UL VW-1 & CSA OFT flame retardancy APPLICATIONS: * Connectorized cable repair * Where substrates are heat sensitive * Delicate & intricate electronics protection * Industrial applications * Flame retardancy requirements * Automated cutting machines CHARACTERISTICS: Shrink Ratio: 3:1 @ 90C ~ Temperature: -55C to 125C ~ Longitudinal Shrinkage: -5% ~ Size: 3/32" - 1 in ~ Packages: Spools ~ Colors: Black, White FIT -421 Pg. 122 MIL-DTL-23053/5C, Class 1 Overexpanded (R) FIT -260 Pg. 119 NEC Article 250-57B, Exception 3 (R) Irradiated Polyolefin Ground Identification FEATURES & BENEFITS: * Color coding leads as a ground circuit * Same physical characteristics as FIT-221 (R) APPLICATIONS: * Approved for use by NFPA for 600 volt ground lead identification * E-OEM component identification * Wire harness identification * Automated cutting machines (spools) CHARACTERISTICS: Shrink Ratio: 2:1 @ 121C ~ Temperature: -55C to 135C ~ Longitudinal Shrinkage: -5% ~ Size: 1/8" - 1 in ~ Packages: Spools ~ Colors: Green with Yellow stripe. Each color covers a minimum of 30% surface area. (R) Over Expanded, Irradiated Polyolefin FEATURES & BENEFITS: * Over expanded to a 4 to 1 shrink ratio * Large supplied diameter sizes * Resistance to water, fungus, UV light * Shrinks to 25% of its original size * Conforms to odd shapes APPLICATIONS: * D-Sub connector strain relief * RS-232 25 pin connector to cable coverage * Covers the most irregular shapes & connectors * PC board coverage/protection CHARACTERISTICS: Shrink Ratio: 4:1 @ 121C ~ Temperature: -55C to 135C ~ Longitudinal Shrinkage: -10% ~ Size: 1 in - 4 in ~ Packages: 4ft lengths ~ Color: Black FIT -621 Pg. 123 (R) FIT -295 Pg. 124 (R) Semi-Rigid Irradiated Polyolefin FEATURES & BENEFITS: * 30% stronger than standard polyolefin * 25% stiffer than standard polyolefin * Low water absorption * Resistance to water, fungus, UV light MIL-DTL-23053/6D, Class 1, 2 (R) (except for clear) (black only) APPLICATIONS: * Strength & stiffness make it excellent for strain relief applications * Heavy duty cable/connector protection * Electrical cable splices * Crimp terminals * Solder joints CHARACTERISTICS: Shrink Ratio: 2:1 @ 135C ~ Temperature: -55C to 135C ~ Longitudinal Shrinkage: -5% ~ Size: 3/64" - 1/2" ~ Packages: 4ft lengths & cut pieces ~ Colors: Multiple Heavy Wall, Adhesive Lined, Irradiated Polyolefin FEATURES & BENEFITS: * Over expanded to a 6 to 1 shrink ratio * Shrinks to 1/6 its original size * Heavy duty adhesive inner lining * Low water absorption * Excellent durability & toughness * Resistant to oils & chemicals * Convenient pre-cut 6 inch lengths APPLICATIONS: * Protection in severe environments * Large to small connector-to-cable protection * Underground utility splice protection * Corrosion protection of metal parts * Protects substrates in direct burial applications * Heavy duty abrasion resistance CHARACTERISTICS: Shrink Ratio: 6:1 @ 120C ~ Temperature: -40C to 125C ~ Longitudinal Shrinkage: -10% ~ Size: 5/8" - 4 in ~ Packages: 6 inch lengths ~ Color: Black CourtesyFofFStevenFEngineering,FInc.-230FRyanFWay,FSouthFSanFFrancisco,FCAF94080-6370-MainFOffice:F(650)F588-9200-OutsideFLocalFArea:F(800)F258-9200-www.stevenengineeri Preferred Heat Shrink Products (R) SIMPLE, COMPREHENSIVE TUBING SOLUTIONS SELECTION GUIDE DUAL WALL / ADHESIVE LINED FIT -300 Pg. 125 SPECIALTY MATERIALS (CONTINUED) MIL-DTL-23053/4D, Class 1 (R) Surface Irradiated/Dual Extruded Polyolefin FEATURES & BENEFITS: * Meltable inner wall * Encapulates without adhesive * Temporary sealing without sticky residue * Increased wall thickness for added protection * High shrink ratios * Excellent dielectric properties (R) APPLICATIONS: * Substrates requiring filled interstices * Digital electronics where adhesive is unacceptable * Temporary applications requiring encapsulation (black only) FIT -400 Pg. 129 MIL-DTL-23053/11C, Class 1 (R) Temperature/Chemical Resistant FEP Teflon* FEATURES & BENEFITS: * Excellent chemical resistance * Extreme temperature range of -67C to 200C * Unmatched dielectric properties * Thinnest wall thickness available * Lower recovery temp than TFE Teflon* CHARACTERISTICS: Shrink Ratio: 3:1 - 6:1 (depending on size) @ 135C ~ Temperature: -55C to 110C ~ Longitudinal Shrinkage: -10% ~ Size: 1/8" - 3/4" ~ Packages: 4ft lengths, cut pieces ~ Colors: Multiple APPLICATIONS: * Fiber optic applications * High temperature cable * Limited space applications * XTRA*GUARD(R) 4 & 5 applications * Digital electronics (signal sensitive equip.) * Extremely caustic environments * Fast recovery time * Data & FEP Teflon* cable applications CHARACTERISTICS: Shrink Ratio: 1.2:1 @ 176C ~ Temperature: -67C to 200C ~ Longitudinal Shrinkage: -15% ~ Size: 0.03" - 0.44" (24AWG-0AWG) ~ Packages: 4ft lengths & 2ft lengths ~ Color: Natural FIT -700 Pg. 126 (R) Bonding, Mastic Lined, Irradiated Polyolefin FEATURES & BENEFITS: * Bonding adhesion to most materials * Environmental & water-tight seal * Prevents wicking & fills interstices * Tubing sizes match 14AWG-2000MCM sizes * Superior strength * High voltage * Pre-cut 12 inch pieces APPLICATIONS: * High voltage splices (up to 2 kV) * Water resistant connections * Underground utility applications * Direct burial * Outdoor insulation & protection * XTRA*GUARD(R) 3 applications FIT -500 Pg. 130 MIL-DTL-23053/12C, Class 3 (R) Temperature/Chemical Resistant TFE Teflon* CHARACTERISTICS: Shrink Ratio: 3:1 @ 121C ~ Temperature: -55C to 90C ~ Longitudinal Shrinkage: -5% ~ Size: 3/4" - 4-1/2 in (14AWG-2000MCM) ~ Packages: 12 inch cut pieces ~ Color: Black FEATURES & BENEFITS: * Supreme chemical resistance * Most extreme temperature range of -67C to 250C * High tensile strength * Unmatched dielectric properties * Extremely thin wall thickness * Low friction coefficient FIT -750 Pg. 127 CHARACTERISTICS: Shrink Ratio: 1.5:1 @ 327C ~ Temperature: -67C to 250C ~ Longitudinal Shrinkage: -20% ~ Size: 0.034" - 0.047" (30AWG-0AWG) ~ Packages: 2ft lengths ~ Color: Natural MIL-DTL-23053/4D, Class 2 (R) Bonding, Adhesive Lined, Irradiated Polyolefin FEATURES & BENEFITS: * Bonding to substrates * Similar to FIT-221 with adhesive liner * Total encapsulation * Reduced diameters * Permanent water & corrosion protection * Internal isolation of individual substrates - "pinching" (R) APPLICATIONS: * Moisture protection of substrates * Permanent sealing of substrates * Wire isolation within a harness * Permanent joint splice repair * General purpose usage with adhesive * XTRA*GUARD(R) 2 applications CHARACTERISTICS: Shrink Ratio: 2:1 @ 121C ~ Temperature: -55C to 110C ~ Longitudinal Shrinkage: -5% ~ Size: 1/4" - 1-1/2 in ~ Packages: 4ft lengths ~ Color: Black SPECIALTY MATERIALS MIL-I-23053/2C, Class 1 ~ CSA OFT Flame Test FIT -105 Pg. 118 (R) Irradiated PVC (R) APPLICATIONS: * Use with PVC cable * With heat sensitive substrates * Fast recovery time * Wire harnesses & cable assemblies * Flame retardant requirements * XTRA*GUARD(R) 1 applications * Automated cutting machines (spools) Highly Flexible, Irradiated Elastomer FEATURES & BENEFITS: * Improved flexibility * More than twice the tensile strength of silicone rubber * Large tubing diameters * Oil resistance & flame retardancy * Abrasion resistance (R) APPLICATIONS: * Military & commercial harnesses * Cold temperature flexing * Machine tool & automation equipment * XTRA*GUARD(R) 4 applications * XTRA*GUARD(R) Flexible Cable applications CHARACTERISTICS: Shrink Ratio: 1.75:1 @ 135C ~ Temperature: -70C to 121C ~ Longitudinal Shrinkage: -10% ~ Size: 1/4" - 3in ~ Packages: Spools ~ Color: Black FIT-600 does not contain any polychloroprene/neoprene but meets the physical properties of MIL-DTL-23053/1C, Class 2 and MIL-R-46846 Type 1, Class 1 specifications. FIT -650 Pg. 132 MIL-DTL-23053/13B Chemical and Temperature Resistant Irradiated Viton*** FEATURES & BENEFITS: * Extreme temperatures -40C to 200C * Excellent chemical resistance (water, oil, acid & fuels) * Flexibility APPLICATIONS: * Chemical production applications * Military electronics/aircraft * In hostile environments requiring some flexibility * XTRA*GUARD(R) 5 applications * XTRA*GUARD(R) Flexible Cable applications CHARACTERISTICS: Shrink Ratio: 2:1 @ 100C ~ Temperature: -35C to 105C ~ Longitudinal Shrinkage: -15% ~ Size: 3/64" - 2 in ~ Packages: 4ft lengths, spools & cut pieces ~ Color: Black CHARACTERISTICS: Shrink Ratio: 2:1 @ 175C ~ Temperature: -40C to 200C ~ Longitudinal Shrinkage: -20% ~ Size: 1/8" - 1 in ~ Packages: Spools ~ Color: Black Inactive for new design, no longer used by the DOD except for replacement purposes FIT FABRIC Pg. 133 MVSS 302 Horizontal Burn Test (R) FIT -350 Pg. 128 MIL-DTL-23053/8C ~ CSA OFT Flame Test (R) Flame Retardant Irradiated Kynar** FEATURES & BENEFITS: * Chemical resistance * 3 times the tensile strength of standard polyolefin * Excellent flame retardancy * Excellent heat resistance * Excellent chemical resistance (R) APPLICATIONS: * High temperature environments * Faster recovery time than Teflon* * Exposure to chemicals * Use with high temperature wire * Caustic environments * XTRA*GUARD(R) 4 applications CHARACTERISTICS: Shrink Ratio: 2:1 @ 175C ~ Temperature: -55C to 175C ~ Longitudinal Shrinkage: -10% ~ Size: 3/64" - 1 in ~ Packages: 4ft lengths & cut pieces ~ Color: Transparent 113 MIL-DTL-23053/1C, Class 2 ~ MIL-R-46846 Type 1, Class 1 CSA OFT Flame Test (R) (R) FEATURES & BENEFITS: * Low shrink temperature (100C) * 30% stronger than standard polyolefin * UL VW-1 & CSA OFT flame retardancy * Low water absorption & UV resistant * Multiple package availability FIT -600 Pg. 131 APPLICATIONS: * Fiber optic applications * TFE Teflon* cable applications * Limited space applications * Digital electronics (signal sensitive equip.) * Extremely caustic environments Highly Flexible, Heat Shrinkable Woven Fabric Tubing FEATURES & BENEFITS: * Superior abrasion resistance over a wide temperature range * Outstanding flexibility and durability * Tight grip without additional fixing * Ease of installation, cuts with scissors * Resistance to harsh environments * Soft, safe handling (R) APPLICATIONS: * Mechanical abrasion protection * Severe environment protection * Noise and rattle protection * Halogen free environment * Flexing applications CHARACTERISTICS: Shrink Ratio: Approx. 2:1 or 3:1 @ 135C Depending on Size ~ Temperature: -40C to 125C ~ Longitudinal Shrinkage: Up to 20% @ 2:1 Shrink Ratio, Up to25% @ 3:1 Shrink Ratio ~ Size: 0.47" - 2.36" ~ Packages: Spools ~ Color: Black *Teflon(R) is a registered trademark of E.I. DuPont Co. **Kynar(R) is a trademark of ELF Atochem, North America, Inc. ***Viton(R) is a registered trademark of Dupont Dow Elastomers CourtesyFofFStevenFEngineering,FInc.-230FRyanFWay,FSouthFSanFFrancisco,FCAF94080-6370-MainFOffice:F(650)F588-9200-OutsideFLocalFArea:F(800)F258-9200-www.stevenengineeri MIL-DTL-23053/5C, CLASS 1, 2 UL STANDARD 224 CSA STANDARD 198 Preferred Heat Shrink Products GENERAL PURPOSE, IRRADIATED POLYOLEFIN (R) FIT -221 (R) CHOOSE FIT -221 FOR: (R) General Purpose Protection and Repair Identification and Beautifying Substrates Insulation from Environment Reduced Longitudinal Shrinkage Resistance to Water, Fungus, UV Light (black only) Use with XTRA*GUARD(R) 1 2 TO 1SHRINK RATIO FIT -221 APPLICATIONS: (R) 114 General Purpose Insulation and Repair Wire and Cable Harnessing and Bundling Cable and Connector Protection Wire and Tubing Splicing and Connecting XTRA*GUARD(R) 1 Applications Automated Cutting Machines (spools) CHARACTERISTICS OPERATING TEMPERATURE: -55C to 135C SHRINKAGE RATIO: Approximately 2 to 1 at 121C COLOR DESCRIPTION: 4-Foot Lengths: 3/64 to 2 Inch - Black, White, Clear, Red, Yellow, Blue, Green 3 and 4 Inch - Black, Clear 6-Inch Lengths: 3/64 to 1 Inch - Black, White, Clear, Red, Yellow, Blue, Green 1-1/2 to 3 Inch - Black, Clear 1/2 or 1 Inch Cut Pieces: Black Spools: See Color Availability Chart Next Page PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -5% Specific Gravity: 1.35 Secant Modulus: 2.5 x 104 max. Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Passes Copper Stability Test Fungus Resistance: No Growth ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm Packaged Assortments Assorted Sizes of 6" Lengths Each Length - Size Identified Assorted Colors Alpha Part No. Tubing Size Range Lengths Per Box FI T -221-MS-1 3/64" - 3/16" (5 Sizes) 6 per Size (30 Lengths) FI T -221-MS-2 1/4" - 3/4" (4 Sizes) 4 per Size (16 Lengths) Recommended For Use With XTRA*GUARD(R) 1 Extra-Premium Grade PVC Jacketed General Purpose Cables SPECIFICATIONS MIL-DTL-23053/5C, Class 1, 2 UL Standard 224 (except for Clear) CSA Standard 198 (except for Clear) (R) Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-DTL-23053/5C, CLASS 1, 2 UL STANDARD 224 CSA STANDARD 198 Preferred Heat Shrink Products GENERAL PURPOSE, IRRADIATED POLYOLEFIN (R) FIT -221 (R) Alpha Part No. And Size Minimum Supplied I.D. Inches mm Maximum Recovered I.D. Inches mm FI T -221-3/64 FI T -221-1/16 FI T -221-3/32 FI T -221-1/8 FI T -221-3/16 FI T -221-1/4 FI T -221-3/8 FI T -221-1/2 FI T -221-3/4 FI T -221-1 FI T -221-1-1/2 FI T -221-2 FI T -221-3 FI T -221-4 0.046 0.063 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000 1.500 2.000 3.000 4.000 0.023 0.031 0.046 0.062 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000 1.500 2.000 1,17 1,60 2,36 3,18 4,75 6,35 9,53 12,70 19,10 25,40 38,10 50,80 76,20 101,60 0,58 0,78 1,17 1,58 2,36 3,18 4,75 6,35 9,53 12,70 19,10 25,40 38,10 50,80 Nom. Recovered Wall Thickness Inches mm 0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035 0.040 0.045 0.050 0.055 0,41 0,43 0,50 0,50 0,50 0,63 0,63 0,63 0,76 0,88 1,02 1,16 1,27 1,40 4 Ft. Lengths Total Ftg. 100 100 100 100 100 100 100 20 20 20 20 20 8 8 Standard Packages Spools No. Cut Tot. Tot. Tot. Pieces Ftg. Ftg. Ftg. 6 Inch 1000 1000 500 500 500 250 200 150 250 250 125 125 100 50 100 100 100 100 100 50 50 50 50 ----- 70 65 60 50 40 35 32 24 16 ----- 40 36 32 28 24 20 16 14 12 8 5 3 2 1 No. Cut Pieces 1/2" or 1" 1000 1000 1000 1000 1000 1000 1000 -------- 115 SPOOL COLOR AVAILABILITY CHART FI T -221 Tubing Size Put-Up Colors FI T -221 Tubing Size 3/64" 1000' Black, Clear 1/16" 1000' 100' All Colors* Black, Clear 70' 500' 100' 65' All Colors All Colors Black, Clear All Colors 500' 100' 60' All Colors Black, Clear All Colors 500' 100' 50' All Colors Black, Clear All Colors 3/32" 1/8" 3/16" 1/4" 250' 100' 40' All Colors Black, Clear All Colors Put-Up Colors 3/8" 200' 50' 35' All Colors Black, Clear All Colors 1/2" 150' 50' 32' 250' 50' 24" All Colors Black, Clear All Colors All Colors Black, Clear All Colors 250" 50" 16" All Colors Black, Clear All Colors 3/4" 1" 1-1/2" 125' Black, Clear 2" 125' Black, Clear 3" 100' Black, Clear 4" 50' Black, Clear *All colors include black, white, clear, red, yellow, blue, green SEE PAGE 116 FOR ECONOMICAL BULK PACKAGES! Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products ECONOMICAL FIT -221 BULK PKGS., IRRADIATED POLYOLEFIN (R) (R) FIT -221B (R) MIL-DTL-23053/5C, CLASS 1, 2 UL STANDARD 224 CSA STANDARD 198 CHOOSE FIT -221B FOR: (R) General Purpose Protection and Repair Identification and Beautifying Substrates Insulation from Environment Reduced Longitudinal Shrinkage Resistance to Water, Fungus, UV Light (black only) Use with XTRA*GUARD(R) 1 116 FIT -221B APPLICATIONS: (R) General Purpose Insulation and Repair Wire and Cable Harnessing and Bundling Cable and Connector Protection Wire and Tubing Splicing and Connecting XTRA*GUARD(R) 1 Applications Alpha Part No. Automated Cutting Machines (spools) CHARACTERISTICS and Size FI T -221B-3/64 FI T -221B-1/16 OPERATING TEMPERATURE: FI T -221B-3/32 -55C to 135C FI T -221B-1/8 SHRINKAGE RATIO: FI T -221B-3/16 Approximately 2 to 1 at 121C FI T -221B-1/4 FI T -221B-3/8 COLOR DESCRIPTION: FI T -221B-1/2 All Bulk Packages: Black, Clear FI T -221B-3/4 FI T -221B-1 PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -5% Specific Gravity: 1.35 Secant Modulus: 2.5 x 10 4 max. Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Passes Copper Stability Test Fungus Resistance: No Growth ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm Minimum Supplied I.D. Inches mm NEW BULK PACKAGES SPOOLS 4 FT. LENGTHS Maximum Nom. Rec. Qty. in Rec. I.D. Wall Thickness Box Total No. of Total Inches mm Inches mm Spool Size Ftg. Pcs. Ftg. 0.046 1,17 0.063 1,60 0.093 2,36 0.125 3,18 0.187 4,75 0.250 6,35 0.375 9,53 0.500 12,70 0.750 19,10 1.000 25,40 0.023 0,58 0.031 0,78 0.046 1,17 0.062 1,58 0.093 2,36 0.125 3,18 0.187 4,75 0.250 6,35 0.375 9,53 0.500 12,70 0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035 0,41 0,43 0,50 0,50 0,50 0,63 0,63 0,63 0,76 0,88 3x1000 3x1000 3x500 3x500 2x500 2x250 2x200 2x150 1x250 1x250 3000 3000 1500 1500 1000 500 400 300 250 250 250x4 250x4 250x4 250x4 250x4 250x4 250x4 200x4 125x4 75x4 1000 1000 1000 1000 1000 1000 1000 800 500 300 2 TO 1SHRINK RATIO Recommended For Use With XTRA*GUARD(R) 1 Extra-Premium Grade PVC Jacketed General Purpose Cables SPECIFICATIONS MIL-DTL-23053/5C, Class 1, 2 UL Standard 224 (except for Clear) CSA Standard 198 (except for Clear) (R) Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-DTL-23053/5C, CLASSES 1 & 3 UL STANDARD 224 CSA STANDARD 198 Preferred Heat Shrink Products LOW SHRINK TEMP., FLAME RETARDANT IRRADIATED POLYOLEFIN (R) FIT -221V (R) CHOOSE FIT -221V FOR: 2 TO 1SHRINK RATIO (R) Lowest Shrink Temperature (90C) Fastest Recovery Time UL VW-1 & CSA OFT Flame Retardancy Resistance to Water, Fungus, UV Light (black only) Large, Economical, Bulk Packages Colors Available! FIT -221V APPLICATIONS: NOW IN COLORS AND ECONOMICAL BULK PACKAGES! Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Standard Packages Nom. Rec. 4 Ft. Wall Lengths Spools No. Cut Thickness Total Total Pieces Inches mm Ftg. Ftg. 6 Inch FI T -221V-3/64 FI T -221V-1/16 FI T -221V-3/32 FI T -221V-1/8 FI T -221V-3/16 FI T -221V-1/4 FI T -221V-3/8 FI T -221V-1/2 FI T -221V-3/4 FI T -221V-1 FI T -221V-1-1/2 FI T -221V-2 0.046 0.063 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000 1.500 2.000 0.023 0,58 0.031 0,78 0.046 1,17 0.062 1,58 0.093 2,36 0.125 3,18 0.187 4,75 0.250 6,35 0.375 9,53 0.500 12,70 0.750 19,10 1.000 25,40 0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035 0.040 0.045 (R) Where Substrates are Heat Sensitive Where Reduced Shrink Time Saves Costs Flame Retardancy Requirements Industrial Applications Cable and Connector Protection Automated Cutting Machines (spools) CHARACTERISTICS OPERATING TEMPERATURE: -55C to 135C SHRINKAGE RATIO: Approximately 2 to 1 at 90C COLOR DESCRIPTION: Standard 4 Ft. Lengths and Spools: Black, White, Red, Yellow, Green, Blue Bulk 4 Ft. Lengths and Spools: Black Only 6 In. Pieces: Black Only PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -5% Specific Gravity: 1.35 Flammability: Self-Extinguishing (UL VW-1, CSA OFT) CHEMICAL PROPERTIES: Corrosive Effect: Passes Copper Stability Test Fungus Resistance: No Growth ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm 1,17 1,60 2,36 3,18 4,75 6,35 9,53 12,70 19,10 25,40 38,10 50,80 Alpha Part No. and Size FI T -221V-3/64 FI T -221V-1/16 FI T -221V-3/32 FI T -221V-1/8 FI T -221V-3/16 FI T -221V-1/4 FI T -221V-3/8 FI T -221V-1/2 FI T -221V-3/4 FI T -221V-1 0,41 0,43 0,50 0,50 0,50 0,63 0,63 0,63 0,76 0,88 1,02 1,14 100 100 100 100 100 100 100 20 20 20 20 20 1000 1000 500 500 500 250 200 150 250 250 125 125 117 40 36 32 28 24 20 16 14 12 8 5 3 BULK PACKAGES SPOOLS 4 FT. LENGTHS Qty. in Box Total No. of Total Spool Size Ftg. Pcs. Ftg. 3x1000 3x1000 3x500 3x500 2x500 2x250 2x200 2x150 1x250 1x250 3000 3000 1500 1500 1000 500 400 300 250 250 250x4 250x4 250x4 250x4 250x4 250x4 250x4 200x4 125x4 75x4 1000 1000 1000 1000 1000 1000 1000 800 500 300 SPECIFICATIONS MIL-DTL-23053/5C, Classes 1 & 3 UL Standard 224 CSA Standard 198 Passes UL VW-1 Flame Test Passes CSA OFT Flame Test (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-I-23053/2C, CLASS 1* UL STANDARD 224 CSA STANDARD 198 Preferred Heat Shrink Products FLEXIBLE IRRADIATED PVC (R) FIT -105 (R) CHOOSE FIT -105 FOR: (R) Low Shrink Temperature (100C) 30% Stronger than Standard Polyolefin UL VW-1 and CSA OFT Flame Retardancy Low Water Absorption and UV Resistant Multiple Package Availability 2 TO 1SHRINK RATIO FIT -105 APPLICATIONS: (R) 118 Use with PVC Cable With Heat Sensitive Substrates Fast Recovery Time Wire Harnesses and Cable Assemblies Flame Retardant Requirements XTRA*GUARD(R) 1 Applications Automated Cutting Machines (spools) Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm Tot. Ftg. Spools Tot. Tot. Tot. Ftg. Ftg. Ftg. FI T -105-3/64 FI T -105-1/16 FI T -105-3/32 FI T -105-1/8 FI T -105-3/16 FI T -105-1/4 FI T -105-3/8 FI T -105-1/2 FI T -105-3/4 FI T -105-1 FI T -105-1-1/2 FI T -105-2 0.046 0.062 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000 1.500 2.000 0.023 0.031 0.046 0.062 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.030 0.035 0.040 0.045 0.050 1000 1000 1000 1000 1000 1000 500 250 250 250 100 100 500 500 100 100 100 100 100 100 100 100 25 50 CHARACTERISTICS OPERATING TEMPERATURE: -20C to 105C SHRINKAGE RATIO: Approximately 2 to 1 at 100C COLOR DESCRIPTION: All Standard Packages: Black (White Available in Certain Sizes) PHYSICAL PROPERTIES: Tensile Strength: 2000 psi, (141 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -15% Specific Gravity: 1.40 Flammability: Self-Extinguishing (UL VW-1, CSA OFT) CHEMICAL PROPERTIES: Corrosive Effect: Meets Requirements of MIL-I-631 Fungus Resistance: No Growth (MIL-I-7444) Water Absorption: 0 to 1% Max. 24 Hrs. at 25C ELECTRICAL PROPERTIES: Dielectric Strength: 400V/mil (158 kV/cm) Volume Resistivity: 1011 ohm-cm 1,17 1,58 2,36 3,18 4,75 6,35 9,53 12,70 19,10 25,40 38,10 50,80 0,58 0,78 1,17 1,58 2,36 3,18 4,75 6,35 9,53 12,70 19,10 25,40 0,50 0,50 0,50 0,63 0,63 0,63 0,76 0,76 0,88 1,02 1,14 1,27 100 25 100 25 25 25 25 25 25 25 25 25 25 Packaged Assortments Assorted Sizes of 6" Lengths Each Length - Size Identified Alpha Part No. Tubing Size Range Lengths Per Box FI T -105-MS-1 3/64" - 1/4" (6 Sizes) 10 Lengths Per Size (60 Lengths) FI T -105-MS-2 3/8" - 1" (4 Sizes) 10 Lengths Per Size (40 Lengths) SPECIFICATIONS MIL-I-23053/2C, Class 1* UL Standard 224 CSA Standard 198 Passes UL VW-1 Flame Test Passes CSA OFT Flame Test (R) *Military Specification Sheet MIL-I-23053/2C, is inactive for new design and is no longer used by the Department of Defense except for replacement purposes. Does not meet MIL-I-23053/2C requirements. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products POLYOLEFIN GROUND IDENTIFICATION (R) UL STANDARD 224 CSA STANDARD 198 IRRADIATED NEC ARTICLE 250-57B, EX.3 FIT -260 (R) CHOOSE FIT -260 FOR: (R) Color Coding Leads as a Ground Circuit Same Physical Characteristics as FIT(R) -221 FIT -260 APPLICATIONS: (R) Approved for Use by NFPA for 600 Volt Ground Lead Identification E-OEM Component Identification Wire Harness Identification Automated Cutting Machines (spools) CHARACTERISTICS Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Recovered I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -260-1/8 FI T -260-1/4 FI T -260-3/8 FI T -260-1/2 FI T -260-3/4 FI T -260-1 0.118 0.236 0.315 0.472 0.748 1.024 0.059 0.118 0.158 0.236 0.355 0.512 0.020 0.025 0.025 0.025 0.030 0.035 3,00 6,00 8,00 11,98 18,99 26,00 1,50 2,99 4,01 6,00 9,02 14,00 0,51 0,64 0,64 0,64 0,76 0,89 Std. Pkg. Spools Total Ft. OPERATING TEMPERATURE: -55C to 135C NFPA-National Fire Protection Association When installed in accordance with NEC Article 250-57B, Exception 3. SHRINKAGE RATIO: Grounding for equipment fastened in place or connected by permanent wiring methods (fixed) Approximately 2 to 1 at 120C COLOR DESCRIPTION: All Standard Packages: Green with Yellow Stripe Each Color will Cover at Least 2 TO 1SHRINK RATIO 30% of the Surface Area PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -5% Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Fungus Resistance: No Growth Water Absorption: 0.1% Max. Chemical Resistance: JP-4, Skydrol 500, Aviation Gas and Hydraulic Fuel ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm 119 500 250 250 250 250 100 SPECIFICATIONS UL Standard 224 CSA Standard 198 NEC Article 250-57B, Exception 3 (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products LOW SHRINK TEMP., FLAME RETARDANT IRRADIATED POLYOLEFIN (R) FIT(R) -321V UL STANDARD 224 CSA STANDARD 198 CHOOSE FIT -321V FOR: (R) Expanded to a 3 to 1 Shrink Ratio Lowest Shrink Temperature (90C) Fastest Recovery Time Reduced Wall Thickness UL VW-1 and CSA OFT Flame Retardancy FIT -321V APPLICATIONS: (R) 120 Connectorized Cable Repair Where Substrates are Heat Sensitive Delicate and Intricate Electronics Protection Industrial Applications Flame Retardancy Requirements Automated Cutting Machines CHARACTERISTICS Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Expanded Inches mm Nom. Rec. Wall Thickness Inches mm FI T -321V-3/32 FI T -321V-1/8 FI T -321V-1/4 FI T -321V-3/8 FI T -321V-1/2 FI T -321V-3/4 FI T -321V-1 IN 0.093 0.125 0.250 0.375 0.500 0.750 1.000 0.031 0.042 0.083 0.125 0.166 0.250 0.333 0.023 0.023 0.023 0.023 0.024 0.024 0.024 OPERATING TEMPERATURE: -55C to 125C SHRINKAGE RATIO: Approximately 3 to 1 at 90C COLOR DESCRIPTION: All Standard Packages: Black & White PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -5% Secant Modulus: 2.5 x 104 max. Flammability: Self-Extinguishing (UL VW-1, CSA OFT) CHEMICAL PROPERTIES: Corrosive Effect: Passes Copper Stability Test Fungus Resistance: No Growth ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm 2,36 3,18 6,35 9,50 12,70 19,10 25,40 0,8 1,1 2,2 3,2 4,3 6,4 8,5 0,58 0,58 0,58 0,58 0,61 0,61 0,61 Spools Total Ftg. 500 500 250 200 150 250 250 3 TO 1SHRINK RATIO SPECIFICATIONS UL Standard 224 CSA Standard 198 Passes UL VW-1 Flame Test Passes CSA OFT Flame Test (R) Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products MEDIUM WALL, ADHESIVE LINED, IRRADIATED POLYOLEFIN (R) FIT -321 MIL-DTL-23053/4D, CLASS 3 (R) CHOOSE FIT -321 FOR: (R) Expanded to a 3 to 1 Shrink Ratio Increaesd Wall Thickness for Durability Water Resistant Adhesive Inner Lining Permanent Bonding Adhesive Use with XTRA*GUARD(R) 1 3 TO 1SHRINK RATIO FIT -321 APPLICATIONS: (R) Connectorized Cable Repair Water Resistance and Encapsulation Environmental and Outdoor Protection XTRA*GUARD(R) 1, 2 & 3 Applications Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Recovered Std. Pkg. Wall Thickness 4 Ft. No. Total Meltable Lgths. Cut Wall Wall Total Pieces Inches mm Inches mm Ftg. 6 Inch FI T -321-1/8 FI T -321-1/4 FI T -321-1/2 FI T -321-1 FI T -321-1-1/2 0.120 3,05 0.240 6,10 0.470 11,90 0.940 23,90 1.570 39,90 0.040 1,02 0.080 2,03 0.160 4,06 0.320 8,13 0.510 13,00 0.040 0.040 0.070 0.100 0.100 CHARACTERISTICS OPERATING TEMPERATURE: -55C to 110C SHRINKAGE RATIO: Approximately 3 to 1 at 125C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1300 psi, (92 kg/cm2 ) Ultimate Elongation: 300% Longitudinal Shrinkage: -15% Heat Resistance: (168 Hrs. at 150C) No Dripping, Cracking or Flowing Low Temperature Flexibility: (4 Hrs. at -55C) No Cracking Flammability: Self-Extinguishing (Outer Jacket Only) CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.5% Max. ELECTRICAL PROPERTIES: Dielectric Strength: 300V/mil (118 kV/cm) Volume Resistivity: 1012 ohm-cm 1,02 1,02 1,75 2,54 2,54 0.020 0.020 0.030 0.040 0.040 0,50 0,50 0,76 1,02 1,02 100 100 20 20 20 121 28 20 14 8 5 Packaged Assortment Assorted Sizes of 6" Lengths Each Length - Size Identified Alpha Part No. FI T -321-MS-1 Tubing Size Range Lengths Per Box 1/8" - 1" (4 Sizes) 5 Per Size (20 Lengths) Recommended For Use With XTRA*GUARD(R) 1 Extra-Premium Grade PVC Jacketed General Purpose Cables SPECIFICATIONS MIL-DTL-23053/4D, Class 3 Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products OVER EXPANDED, IRRADIATED POLYOLEFIN (R) FIT -421 (R) MIL-DTL-23053/5C, CLASS 1 OVER EXPANDED CHOOSE FIT -421 FOR: (R) Over Expanded to a 4 to 1 Shrink Ratio Large Supplied Diameter Sizes Resistance to Water, Fungus, UV Light Shrinks to 25% of its Original Size Conforms to Odd Shapes FIT -421 APPLICATIONS: 4 TO 1SHRINK RATIO (R) 122 D-Sub Connector Strain Relief RS-232 25 Pin Connector to Cable Coverage Covers the Most Irregular Shapes and Connectors PC Board Coverage/Protection CHARACTERISTICS Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -421-1 FI T -421-1-1/2 FI T -421-2 FI T -421-3 FI T -421-4 1.000 1.500 2.000 3.000 4.000 0.275 0.375 0.550 0.810 1.050 0.045 0.045 0.045 0.045 0.045 25,40 38,10 50,80 76,20 101,60 6,99 9,53 13,97 20,57 26,67 1,14 1,14 1,14 1,14 1,14 Std. Pkg. 4 Ft. Lengths Total Ftg. 20 20 20 8 8 OPERATING TEMPERATURE: -55C to 135C SHRINKAGE RATIO: Approximately 4 to 1 at 121C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -10% Specific Gravity: 1.35 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm SPECIFICATIONS MIL-DTL-23053/5C, Class 1 Over Expanded Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products HEAVY WALL, ADHESIVE LINED, IRRADIATED POLYOLEFIN (R) FIT -621 (R) CHOOSE FIT -621 FOR: (R) Over Expanded to a 6 to 1 n Shrink Ratio Shrinks to 1/6 its Original Size Heavy Duty Adhesive Inner Lining Low Water Absorption Excellent Durability and Toughness Resistant to Oils and Chemicals Convenient Pre-cut 6 Inch Lengths FIT -621 APPLICATIONS: (R) Protection in Severe Environments Large to Small Connector-to-Cable Protection Underground Utility Splice Protection Corrosion Protection of Metal Parts Protects Substrates in Direct Burial Applications Heavy Duty Abrasion Resistance CHARACTERISTICS Alpha Part No. and Size Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm Standard Package FI T -1-5/8 0.60 15,24 0.150 3,81 0.060 1,52 10 x 6 In. Lengths (5 Feet) 3 x 6 In. Lengths (1.5 Feet) FI T -621-1-1/4 1.25 31,75 0.220 5,59 0.059 1,49 10 x 6 In. Lengths (5 Feet) 3 x 6 In. Lengths (1.5 Feet) FI T -621-2 2.00 50,80 0.375 9,50 0.105 2,70 10 x 6 In. Lengths (5 Feet) 3 x 6 In. Lengths (1.5 Feet) 24 x 6 In. Lengths (12 Feet) FI T -621-2-1/2 2.50 63,50 0.500 12,70 0.120 3,05 10 x 6 In. Lengths (1.5 Feet) 3 x 6 In. Lengths (1.5 Feet) FI T -621-3 3.00 76,20 0.750 19,05 0.120 3,05 10 x 6 In. Lengths (5 Feet) 3 x 6 In. Lengths (1.5 Feet) FI T -621-4 4.00 101,60 0.900 22,86 0.140 3,55 10 x 6 In. Lengths (5 Feet) 3 x 6 In. Lengths (1.5 Feet) OPERATING TEMPERATURE: -55C to 90C SHRINKAGE RATIO: Approximately 6 to 1 at 121C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1200 psi, (84 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -10% Specific Gravity: 1.4 Low Temperature Flexibility: To -55C (No Cracking) CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.5% Chemical Resistance: JP-8 Hydraulic Fluids, Deicing Fluid, Lubricating Oil ELECTRICAL PROPERTIES: Dielectric Strength: 200V/mil (79 kV/cm) Volume Resistivity: 1013 ohm cm Web Site: www.alphawire.com Email: info@alphawire.com Minimum Supplied I.D. Inches mm 123 6 TO 1SHRINK RATIO Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-DTL-23053/6D, CLASS 1, 2 UL STANDARD 224 CSA STANDARD 198 Preferred Heat Shrink Products SEMI-RIGID IRRADIATED POLYOLEFIN (R) FIT -295 (R) CHOOSE FIT -295 FOR: (R) 30% Stronger Than Standard Polyolefin 25% Stiffer Than Standard Polyolefin Low Water Absorption Resistance to Water, Fungus, UV Light FIT -295 APPLICATIONS: (R) 124 Strength and Stiffness Make it Excellent for Strain Relief Applications Heavy Duty Cable/Connector Protection Electrical Cable Splices Crimp Terminals Solder Joints CHARACTERISTICS Alpha Part No. and Size OPERATING TEMPERATURE: -55C to 135C FI T -295-3/64 FI T -295-1/16 SHRINKAGE RATIO: Approximately 2 to 1 at 135C FI T -295-3/32 FI T -295-1/8 COLOR DESCRIPTION: FI T -295-3/16 3/64 Inch: Yellow, Black, Clear FI T -295-1/4 1/16 Inch: White, Black, Clear FI T -295-3/8 3/32 Inch: Blue, Black, Clear FI T -295-1/2 1/8 Inch: Red, Black, Clear 3/16 Inch: Green, Black, Clear 1/4 Inch: Slate, Black, Clear 3/8 Inch: Brown, Black, Clear 1/2 Inch: White, Black, Clear PHYSICAL PROPERTIES: Tensile Strength: 2000 psi, (141 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -5% Specific Gravity: 1.35 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.5% ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1014 ohm-cm Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm Std. Pkg. 4 Ft. No. Cut Total Pieces Ftg. 6 Inch 0.046 0.063 0.093 0.125 0.187 0.250 0.375 0.500 0.023 0.032 0.045 0.063 0.093 0.125 0.187 0.250 0.020 0.020 0.020 0.020 0.025 0.025 0.030 0.030 100 100 100 100 100 100 100 20 1,17 1,60 2,36 3,18 4,75 6,35 9,53 12,70 0,58 0,81 1,14 1,60 2,36 3,18 4,75 6,35 0,50 0,50 0,50 0,50 0,63 0,63 0,76 0,76 40 36 32 28 24 20 16 14 2 TO 1SHRINK RATIO SPECIFICATIONS MIL-DTL-23053/6D, Class 1, 2 UL Standard 224 (except for clear) CSA Standard 198 (black only) (R) Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-DTL-23053/4D, CLASS 1 UL STANDARD 224 Preferred Heat Shrink Products SURFACE IRRADIATED/DUAL EXTRUDED POLYOLEFIN (R) FIT -300 (R) CHOOSE FIT -300 FOR: (R) Meltable Inner Wall Encapulates Without Adhesive Temporary Sealing Without Sticky Residue Increased Wall Thickness for Added Protection High Shrink Ratios Excellent Dielectric Properties FIT -300 APPLICATIONS: (R) Substrates Requiring Filled Interstices Digital Electronics Where Adhesive is Unacceptable Temporary Applications Requiring Encapsulation CHARACTERISTICS Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -300-1/8 FI T -300-3/16 FI T -300-1/4 FI T -300-3/8 FI T -300-1/2 FI T -300-3/4 FI T -300-3/10 0.125 3,18 0.187 4,75 0.250 6,35 0.375 9,53 0.500 12,70 0.750 19,10 0.300 7,62 0.023 0.060 0.080 0.135 0.195 0.313 0.050 0.038 0.043 0.047 0.050 0.055 0.065 0.100 OPERATING TEMPERATURE: -55C to 110C SHRINKAGE RATIO: Approximately 6 to 1 or 3 to 1 at 135C Depending on Size COLOR DESCRIPTION: 1/8 Inch: Brown, Black 3/16 Inch: Slate, Black 1/4 Inch: White, Black 3/8 Inch: Red, Black 1/2 Inch: Blue, Black 3/4 Inch: Yellow, Black 3/10 Inch: Blue, Black PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -10% Specific Gravity: 0.99 CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.1% ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 1015 ohm-cm 6 TO 1SHRINK RATIO 0,58 1,52 2,03 3,43 4,95 7,95 1,27 0,96 1,09 1,19 1,27 1,40 1,65 2,54 Total Std. Pkg. Nom. Rec. 4 Ft. No. Meltable Wall Lgths. Cut Thickness Total Pieces Inches mm Ftg. 6 Inch 0.020 0.025 0.027 0.030 0.035 0.040 0.065 0,50 0,63 0,68 0,76 0,88 1,02 1,65 100 100 100 100 20 20 100 125 14 12 10 8 6 4 4 3 TO 1SHRINK RATIO SPECIFICATIONS MIL-DTL-23053/4D, Class 1 UL Standard 224 (black only) (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products BONDING, MASTIC LINED, IRRADIATED POLYOLEFIN (R) FIT -700 (R) CHOOSE FIT -700 FOR: (R) Bonding Adhesion to Most Materials Environmental and Water-Tight Seal Prevents Wicking and Fills Interstices Tubing Sizes Match 14AWG-2000MCM Sizes Superior Strength High Voltage Pre-cut 12 Inch Pieces Use with XTRA*GUARD(R) 3 126 FIT -700 APPLICATIONS: (R) High Voltage Splices (up to 2 kV) Water Resistant Connections Underground Utility Applications Direct Burial Outdoor Insulation and Protection XTRA*GUARD(R) 3 Applications Alpha Part No. Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -700-21 FI T -700-22 FI T -700-23 FI T -700-24 FI T -700-25 FI T -700-26 0.750 1.100 1.500 2.000 3.000 4.500 0.220 0.375 0.500 0.750 1.250 1.750 0.095 0.105 0.140 0.155 0.155 0.155 CHARACTERISTICS OPERATING TEMPERATURE: -55C to 90C SHRINKAGE RATIO: Approximately 3 to 1 at 121C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 2250 psi, (159 kg/cm2 ) Ultimate Elongation: 350% Longitudinal Shrinkage: -5% Specific Gravity: 1.09 CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.1% ELECTRICAL PROPERTIES: Dielectric Strength: 350V/mil 10,20 33,02 38,10 50,80 72,20 114,30 5,59 9,57 12,79 19,10 30,80 43,50 1,52 2,66 3,05 3,05 3,95 3,95 Std. No Pieces 12 Inch 6 6 6 6 6 6 3 TO 1SHRINK RATIO Recommended For Use With XTRA*GUARD(R) 3 Extra-Durable Outdoor Direct-Burial Cables Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-DTL-23053/4D, CLASS 2 UL STANDARD 224 Preferred Heat Shrink Products BONDING, ADHESIVE-LINED, IRRADIATED POLYOLEFIN (R) FIT -750 (R) CHOOSE FIT -750 FOR: (R) Bonding to Substrates Similar to FIT(R) -221 with Adhesive Liner Total Encapsulation Reduced Diameters Permanent Water and Corrosion Protection Internal Isolation of Individual Substrates - "Pinching" Use with XTRA*GUARD(R) 2 FIT -750 APPLICATIONS: (R) Moisture Protection of Substrates Permanent Sealing of Substrates Wire Isolation Within a Harness Permanent Joint Splice Repair General Purpose Usage with Adhesive XTRA*GUARD(R) 2 Applications Alpha Part No. and Size Minimum Supplied I.D. Inches mm Std. Nom. Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -750-1/4 FI T -750-3/8 FI T -750-1/2 FI T -750-3/4 FI T -750-1 FI T -750-1-1/2 0.250 0.375 0.500 0.750 1.000 1.500 0.125 0.187 0.250 0.375 0.500 0.750 0.030 0.031 0.032 0.037 0.039 0.046 6,35 9,53 12,70 19,00 25,40 38,10 3,18 4,75 6,35 9,53 12,70 19,00 Std. Pkg. 4 Ft. Lengths Total Ftg. 0,76 0,78 0,81 0,94 0,99 1,17 127 100 100 20 20 20 20 2 TO 1SHRINK RATIO CHARACTERISTICS OPERATING TEMPERATURE: -55C to 110C SHRINKAGE RATIO: Approximately 2 to 1 at 121C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -10% Flammability: Self-Extinguishing (Outer Jacket Only) Nominal Recovered Adhesive Thickness: 0.005" to 0.011" (0,13mm to 0,28mm) CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: Does Not Support Growth Water Absorption: 0.5% ELECTRICAL PROPERTIES: Dielectric Strength: 400V/mil (158 kV/cm) Volume Resistivity: 1012 ohm-cm Recommended For Use With XTRA*GUARD(R) 2 Extra-Rugged Polyurethane Jacketed Cables SPECIFICATIONS MIL-DTL-23053/4D, Class 2 UL Standard 224 (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products HIGHLY FLAME-RETARDANT IRRADIATED KYNAR* (R) MIL-DTL-23053/8C UL STANDARD 224 CSA STANDARD 198 FIT -350 (R) CHOOSE FIT -350 FOR: (R) Chemical Resistance 3 Times the Tensile Strength of Standard Polyolefin Excellent Flame Retardancy Excellent Heat Resistance Excellent Chemical Resistance 128 FIT -350 APPLICATIONS: (R) High Temperature Environments Faster Recovery Time than Teflon** Exposure to Chemicals Use with High Temperature Wire Caustic Environments XTRA*GUARD(R) 4 Applications CHARACTERISTICS Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -350-3/64 FI T -350-1/16 FI T -350-3/32 FI T -350-1/8 FI T -350-3/16 FI T -350-1/4 FI T -350-3/8 FI T -350-1/2 FI T -350-3/4 FI T -350-1 0.046 0.063 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000 0.023 0.031 0.046 0.062 0.093 0.125 0.187 0.250 0.375 0.500 0.010 0.010 0.010 0.010 0.010 0.013 0.013 0.013 0.017 0.019 OPERATING TEMPERATURE: -55C to 175C SHRINKAGE RATIO: Approximately 2 to 1 at 175C COLOR DESCRIPTION: All Standard Packages: Transparent PHYSICAL PROPERTIES: Tensile Strength: 5000 psi, (352 kg/cm2 ) Ultimate Elongation: 150% Longitudinal Shrinkage: -10% Specific Gravity: 1.80 Flammability: Self-Extinguishing (UL VW-1, CSA OFT) CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.5% Chemical Resistance: Solvents, JP4, Oxidants, Strong Acids and Bases ELECTRICAL PROPERTIES: Dielectric Strength: 3/64" to 1/2" 800V/mil (315 kV/cm) 3/4" to 1" 600V/mil (236 kV/cm) Volume Resistivity: 2 x 1013 ohm-cm 1,17 1,60 2,36 3,18 4,75 6,35 9,53 12,70 19,10 25,40 0,58 0,78 1,17 1,58 2,36 3,18 4,75 6,35 9,53 12,70 0,25 0,25 0,25 0,25 0,25 0,33 0,33 0,33 0,43 0,48 Std. Pkg. 4 Ft. No. Lengths Cut Total Pieces Ftg. 6 Inch 100 100 100 100 100 100 100 20 20 20 32 28 24 20 16 12 8 4 2 1 2 TO 1SHRINK RATIO SPECIFICATIONS (R) MIL-DTL-23053/8C UL Standard 224 CSA Standard 198 Passes UL VW-1 Flame Test Passes CSA OFT Flame Test **Kynar(R) is a registered trademark of ELF Atochem North America, Inc. **Teflon(R) is a registered trademark of E.I. DuPont Co. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products TEMPERATURE/CHEMICAL RESISTANT FEP TEFLON* (R) MIL-DTL-23053/11C, CLASS 1 FIT -400 (R) CHOOSE FIT -400 FOR: (R) Excellent Chemical Resistance Extreme Temperature Range of -67C to 200C Unmatched Dielectric Properties Thinnest Wall Thickness Available Lower Recovery Temp than TFE Teflon* Use with XTRA*GUARD(R) 4 and XTRA*GUARD(R) 5 129 FIT -400 APPLICATIONS: (R) Fiber Optic Applications High Temperature Cable Limited Space Applications XTRA*GUARD(R) 4 & 5 Applications Digital Electronics (Signal Sensitive Equipment) Extremely Caustic Environments Fast Recovery Time Data and FEP Teflon* Cable Applications CHARACTERISTICS Alpha Part No. and Size (AWG) Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -400-24 FI T -400-22 FI T -400-20 FI T -400-18 FI T -400-16 FI T -400-14 FI T -400-12 FI T -400-10 FI T -400-9 FI T -400-8 FI T -400-7 FI T -400-6 FI T -400-5 FI T -400-4 FI T -400-3 FI T -400-2 FI T -400-1 FI T -400-0 0.031 0.036 0.045 0.060 0.075 0.092 0.115 0.141 0.158 0.180 0.197 0.225 0.248 0.290 0.310 0.365 0.400 0.440 0.027 0.032 0.039 0.049 0.061 0.072 0.089 0.114 0.124 0.143 0.158 0.180 0.198 0.226 0.249 0.280 0.311 0.349 0.008 0.008 0.008 0.008 0.009 0.009 0.009 0.010 0.010 0.010 0.011 0.011 0.011 0.011 0.011 0.012 0.012 0.012 OPERATING TEMPERATURE: -67C to 200C SHRINKAGE RATIO: Approximately 1.2 to 1 at 176C COLOR DESCRIPTION: All Standard Packages: Natural PHYSICAL PROPERTIES: Tensile Strength: 2000 psi, (141 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -15% Specific Gravity: 2.17 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.01% Chemical Resistance: All Chemicals at Room Temperature ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil (197 kV/cm) Volume Resistivity: 2 x 1017 ohm-cm SPECIFICATIONS MIL-DTL-23053/11C, Class 1 Web Site: www.alphawire.com Email: info@alphawire.com 1.2 TO1SHRINK RATIO 0,79 0,91 1,14 1,52 1,90 2,33 2,92 3,58 4,01 4,57 5,00 5,72 6,29 7,36 7,87 9,27 10,20 11,22 0,68 0,81 0,99 1,25 1,55 1,83 2,26 2,90 3,15 3,63 4,01 4,57 5,03 5,74 6,33 7,11 7,90 8,87 0,20 0,20 0,20 0,20 0,22 0,22 0,22 0,25 0,25 0,25 0,27 0,27 0,27 0,27 0,27 0,30 0,30 0,30 Std. Pkg. 4 Ft. 2 Ft. Lengths Lengths Total Total Ftg. Ftg. 100 100 100 100 100 100 100 100 100 100 100 100 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 100 100 100 100 100 Recommended For Use With XTRA*GUARD(R) 4 Extra-Protection, High/Low Temperature TPE Jacketed Cables and XTRA*GUARD(R) 5 Extra High-Temperature/ Chemical-Resistant FEP Teflon(R) Jacketed Cables *Teflon(R) is a registered trademark of E.I. DuPont Co. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products TEMPERATURE/CHEMICAL RESISTANT TFE TEFLON* (R) FIT -500 (R) MIL-DTL-23053/12C, CLASS 3 CHOOSE FIT -500 FOR: (R) 130 Supreme Chemical Resistance Most Extreme Temperature Range of -67C to 250C Highest Tensile Strength Unmatched Dielectric Properties Extremely Thin Wall Thickness Low Friction Coefficient FIT -500 APPLICATIONS: (R) Fiber Optic Applications TFE Teflon* Cable Applications Limited Space Applications Digital Electronics (Signal Sensitive Equipment) Extremely Caustic Environments CHARACTERISTICS Alpha Part No. and Size (AWG) Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -500-30 FI T -500-28 FI T -500-26 FI T -500-24 FI T -500-22 FI T -500-20 FI T -500-18 FI T -500-16 FI T -500-14 FI T -500-12 FI T -500-10 FI T -500-8 FI T -500-6 FI T -500-4 FI T -500-2 FI T -500-0 0.034 0.038 0.046 0.050 0.055 0.060 0.076 0.093 0.120 0.150 0.191 0.240 0.302 0.370 0.430 0.470 0.015 0.018 0.022 0.027 0.032 0.039 0.049 0.061 0.072 0.089 0.112 0.141 0.178 0.224 0.278 0.347 0.009 0.009 0.009 0.010 0.010 0.012 0.012 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 OPERATING TEMPERATURE: -67C to 250C SHRINKAGE RATIO: Approximately 1.5 to 1 at 327C COLOR DESCRIPTION: All Standard Packages: Natural PHYSICAL PROPERTIES: Tensile Strength: 2500 psi, (176 kg/cm2 ) Ultimate Elongation: 200% Longitudinal Shrinkage: -20% Specific Gravity: 2.20 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.01% Chemical Resistance: All Chemicals at Room Temperature ELECTRICAL PROPERTIES: Dielectric Strength: 800V/mil (315 kV/cm) Volume Resistivity: 1018 ohm-cm 0,86 0,97 1,17 1,27 1,40 1,52 1,93 2,36 3,05 3,81 4,85 6,10 7,67 9,40 8,64 11,90 0,38 0,46 0,56 0,69 0,81 0,99 1,24 1,55 1,83 2,26 2,84 3,58 4,52 5,69 7,06 8,81 0,23 0,23 0,23 0,25 0,25 0,30 0,30 0,30 0,30 0,30 0,30 0,38 0,38 0,38 0,38 0,38 2 Ft. Lengths Standard Pkg. Total Ftg. 100 100 100 100 100 100 100 100 100 50 50 50 20 20 20 20 1.5 TO1SHRINK RATIO SPECIFICATIONS MIL-DTL-23053/12C, Class 3 *Teflon(R) is a registered trademark of E.I. DuPont Co. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-DTL-23053/1C, Preferred Heat Shrink Products (R) CLASS 2 , HIGHLY-FLEXIBLE IRRADIATED ELASTOMER MIL-R-46846, TYPE 1, CLASS 1 , FIT(R) -600 UL STANDARD 224, CSA STANDARD 198 CHOOSE FIT -600 FOR: (R) Improved Flexibility More than Twice the Tensile Strength of Silicone Rubber Large Tubing Diameters Oil Resistance and Flame Retardancy Abrasion Resistance Use with XTRA*GUARD(R) 4 FIT -600 APPLICATIONS: Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm Std. Put-Up Spools Feet FI T -600-1/4 FI T -600-3/8 FI T -600-1/2 FI T -600-5/8 FI T -600-3/4 FI T -600-7/8 FI T -600-1 FI T -600-1-1/4 FI T -600-1-1/2 FI T -600-1-3/4 FI T -600-2 FI T -600-3 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 1.750 2.000 3.000 0.143 0.214 0.286 0.357 0.428 0.500 0.570 0.714 0.857 1.000 1.140 1.710 0.035 0.040 0.048 0.052 0.057 0.065 0.070 0.087 0.095 0.107 0.110 0.125 25, 150 25, 150 25, 150 25, 150 25, 100 25, 100 25, 100 25, 100 25, 100 25, 75 25, 75 25, 50 (R) Military and Commercial Harnesses Cold Temperature Flexing Machine Tool and Automation Equipment XTRA*GUARD(R) 4 Applications XTRA*GUARD(R) Flexible Cable Applications CHARACTERISTICS OPERATING TEMPERATURE: -70C to 121C SHRINKAGE RATIO: Approximately 1.75 to 1 at 135C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 225% Longitudinal Shrinkage: -10% Specific Gravity: 1.5 Flammability: Self-Extinguishing (UL VW-1, CSA OFT) CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: Inert Water Absorption: 1.0% Chemical Resistance: JP4, Aviation Gas, Hydraulic Fluids ELECTRICAL PROPERTIES: Dielectric Strength: 1/4" to 1" 300V/mil (118 kV/cm) 1-1/4" to 3" 200V/mil (79 kV/cm) Volume Resistivity: 1011 ohm-cm 6,35 9,53 12,70 15,90 19,10 22,22 25,40 31,75 38,10 44,45 50,80 76,20 3,63 5,44 7,26 9,07 10,91 12,70 14,58 18,13 21,87 25,40 28,95 43,43 0,88 1,02 1,22 1,32 1,45 1,65 1,78 2,21 2,41 2,72 2,79 3,18 131 1.75 TO1SHRINK RATIO Recommended For Use With XTRA*GUARD(R) 4 Extra-Protection, High/Low Temperature TPE Jacketed Cables and Oil-Resistant XTRA*GUARD(R) Flexible Cables Permanent Solutions For Critical Flexing Applications! SPECIFICATIONS MIL-DTL-23053/1C, Class 2 MIL-R-46846, Type 1, Class 1 UL Standard 224 CSA Standard 198 Passes UL VW-1 Flame Test Passes CSA OFT Flame Test (R) Web Site: www.alphawire.com Email: info@alphawire.com FIT-600 does not contain polychloroprene/neoprene but meets the physical properties of MIL-DTL-23053/1C, Class 2 and MIL-R-46846 Type 1, Class 1 specifications. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products CHEMICAL AND TEMPERATURE RESISTANT IRRADIATED VITON* (R) FIT -650 MIL-DTL-23053/13B (R) CHOOSE FIT -650 FOR: (R) Extreme Temperatures -40C to 200C Excellent Chemical Resistance (Water, Oil, Acid and Fuels) Flexibility Use with XTRA*GUARD(R) 5 and XTRA*GUARD(R) Flexible Cables 132 FIT -650 APPLICATIONS: (R) Chemical Production Applications Military Electronics/Aircraft In Hostile Environments Requiring Some Flexibility XTRA*GUARD(R) 5 Applications XTRA*GUARD(R) Flexible Cable Applications Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -650-1/8 FI T -650-3/16 FI T -650-1/4 FI T -650-3/8 FI T -650-1/2 FI T -650-3/4 FI T -650-1 0.125 0.187 0.250 0.375 0.500 0.750 1.000 0.062 0.093 0.125 0.187 0.250 0.375 0.500 0.030 0.033 0.033 0.033 0.033 0.042 0.049 CHARACTERISTICS OPERATING TEMPERATURE: -40C to 200C SHRINKAGE RATIO: Approximately 2 to 1 at 175C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1200 psi, (85 kg/cm2) Ultimate Elongation: 250% Longitudinal Shrinkage: -20% Specific Gravity: 2.0 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Shelf Life: 2 Years ELECTRICAL PROPERTIES: Dielectric Strength: 200V/mil (79 kV/cm) Volume Resistivity: 109 ohm-cm 3,2 4,7 6,4 9,5 12,7 19,1 25,4 1,6 2,4 3,2 4,7 6,4 9,5 12,7 0,76 0,84 0,84 0,84 0,84 1,10 1,20 Std. Pkg. Spools Total Ftg. 100 100 100 100 100 100 100 2 TO 1SHRINK RATIO Recommended For Use With XTRA*GUARD(R) 5 Extra High-Temperature/ Chemical-Resistant FEP Teflon(R) Jacketed Cables and Oil-Resistant XTRA*GUARD(R) Flexible Cables Permanent Solutions For Critical Flexing Applications! SPECIFICATIONS MIL-DTL-23053/13B *Viton(R) is a registered trademark of Dupont Dow Elastomers Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products HIGHLY FLEXIBLE, HEAT SHRINKABLE WOVEN FABRIC TUBING (R) FIT FABRIC (R) CHOOSE FIT FABRIC FOR: (R) Superior Abrasion Resistance over a Wide Temperature Range Outstanding Flexibility and Durability Tight Grip without Additional Fixing Ease of Installation Resistance to Harsh Environments Soft, Safe Handling Cuts with Scissors 133 FIT FABRIC APPLICATIONS: (R) Mechanical Abrasion Protection Severe Environment Protection Noise and Rattle Protection Halogen Free Environment Flexing Applications 2 TO 1SHRINK RATIO 3 TO 1SHRINK RATIO New! CHARACTERISTICS OPERATING TEMPERATURE: -40C to 125C Alpha Part No. SHRINKAGE RATIO: FIT FAB-1 Approximately 2 to 1 or 3 to 1 FIT FAB-2 at 135C Depending on Size FIT FAB-3 FIT FAB-4 COLOR DESCRIPTION: FIT FAB-5 All Standard Packages: Black FIT FAB-6 PHYSICAL PROPERTIES: FIT FAB-7 Longitudinal Shrinkage: FIT FAB-8 FIT FAB-9 Up to 20% @ 2:1 Shrink Ratio FIT FAB-10 Up to 25% @ 3:1 Shrink Ratio Flammability: Meets MVSS 302 Horizontal Burn Test CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Chemical Resistance: Antifreeze (50% Ethylene Glycol), Engine Oil, Mineral Hydraulic Fluid, Detergent (1% Teepol), Brake Fluid (DOT 4), Unleaded Gasoline, Diesel Fuel, Battery Acid Approx. Shrink Ratio 2 to 1 2 to 1 2 to 1 2 to 1 2 to 1 2 to 1 2 to 1 3 to 1 3 to 1 3 to 1 Minimum Supplied I.D. Inches mm 0.47 0.79 1.18 1.57 1.97 2.36 2.76 0.71 1.18 2.36 12,0 20,0 30,0 40,0 50,0 60,0 70,0 18,0 30,0 60,0 Maximum Rec. I.D. Inches mm 0.24 0.39 0.59 0.79 0.98 1.18 1.38 0.24 0.39 0.79 6,0 10,0 15,0 20,0 25,0 30,0 35,0 6,0 10,0 20,0 Non-Rec. Wall Thickness Inches mm 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 Std. Spools Total Total Ftg. Ftg. 0,99 0,99 0,99 0,99 0,99 0,99 0,99 0,99 0,99 0,99 50 50 50 50 25 25 25 50 50 25 200 200 200 200 100 100 100 200 200 100 SPECIFICATIONS MVSS 302 Horizontal Burn Test (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products HIGHLY-FLEXIBLE IRRADIATED SILICONE RUBBER (R) FIT FLEX UL STANDARD 224 (R) CHOOSE FIT FLEX FOR: (R) Highest Flexibility Available Flexibility in Widest Temperature Range, -75C to 200C Scrape Abrasion Resistance Pliability when Substrate Requires "Give" Flame Retardancy Use with XTRA*GUARD(R) Flexible Cables 134 FIT FLEX APPLICATIONS: (R) Robotics Cables Automation Equipment Dressing Environments With Varied Temperatures XTRA*GUARD(R) Flexible Cable Applications Fiber Optic Cable Bundles Assemblies and Harnesses Requiring Flexibility Alpha Part No. and Size Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm Nom. Rec. Wall Thickness Inches mm FI T -FLEX-2 FI T -FLEX-3 FI T -FLEX-5 FI T -FLEX-6 FI T -FLEX-9 FI T -FLEX-12 FI T -FLEX-20 0.112 0.190 0.305 0.391 0.588 0.825 1.217 0.070 0.116 0.184 0.240 0.357 0.475 0.790 0.040 0.040 0.040 0.060 0.060 0.080 0.080 CHARACTERISTICS OPERATING TEMPERATURE: -75C to 200C SHRINKAGE RATIO: Approximately 1.70 to 1 at 135C COLOR DESCRIPTION: All Standard Packages: Gray PHYSICAL PROPERTIES: Tensile Strength: 600 psi, (42 kg/cm2 ) Ultimate Elongation: 250% Longitudinal Shrinkage: -15% Specific Gravity: 1.25 Flammability: Self-Extinguishing (UL VW-1) CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Water Absorption: 1.0% Shelf Life: 1 Year ELECTRICAL PROPERTIES: Dielectric Strength: 200V/mil (79 kV/cm) Volume Resistivity: 1012 ohm-cm 2,84 4,82 7,74 9,93 14,93 20,95 30,91 1,77 2,94 4,67 6,09 9,06 12,06 20,06 1,02 1,02 1,02 1,52 1,52 2,03 2,03 Std. Pkg,. Spools Feet 25, 100 25, 100 25, 100 25, 100 25, 100 25, 100 25, 100 1.7 TO1SHRINK RATIO Recommended For Use With Oil-Resistant XTRA*GUARD(R) Flexible Cables Permanent Solutions For Critical Flexing Applications! SPECIFICATIONS UL Standard 224 (R) Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com (R) FIT MINIGUN: (R) Preferred Heat Shrink Products GENERAL PURPOSE HEAT SHRINK KIT FIT MGKIT 1 UL STANDARD 499 (R) CHOOSE FIT MGKIT 1 FOR: (R) A Convenient Kit Including Alpha's Smallest Heat Gun, FIT(R) MINIGUN Along with an Economical, Functional Variety Pack of Alpha Wire's Industry-Leading FIT(R) -221 General Purpose Irradiated Polyolefin Heat Shrinkable Tubing in 6-Inch Cut Pieces and in Various Colors and Sizes Convenience in the Shop or in the Field Cost Effective Solution for Electrical and Electronics Technicians 135 FIT MGKIT 1 APPLICATIONS: (R) A Completely Portable and Extremely Compact System that Includes all Necessary Materials to Satisfy Strain Relief, Splicing, Connecting, Identification, Environmental Protection and Cable Repair Applications CHARACTERISTICS OPERATING TEMPERATURE: FIT(R) MINIGUN Temperature Setting: Nozzle Temperature to 1000F (538C) COLOR DESCRIPTION: FIT(R) MINIGUN: Green FIT(R) -221-R: See Chart For Tubing Colors PHYSICAL PROPERTIES: FIT(R) MINIGUN: Cord Length: 6.0 Ft. (1.83m) Net Weight: 9.2 Ounces (0.575 lbs.) Workbench Storage Loop Included FIT(R) -221-R: See Chart For Tubing Sizes For More Detailed Information on FIT(R) -221 General Purpose Irradiated Polyolefin Heat Shrinkable Tubing, See Page 114 in the Alpha Wire Master Catalog or Visit www.alphawire.com ELECTRICAL PROPERTIES: FIT(R) MINIGU N Voltage: 120 Volt Power: 360 Watts Current: 3 Amps 2 TO 1SHRINK RATIO New! FIT(R) MGKIT 1 CONTENTS Alpha Part No. Content Description Quantity FI T MINIGUN Compact, Lightweight, Portable Heat Gun FI T -221-R FI T -221 VARIETY PACK (See Below For Tubing Sizes and Colors) FIT(R) VARIETY PACK (FIT(R) -221-R) CONTENTS FIT(R) -221-R Number of Cut Pieces Tubing Size Black White Red Blue Yellow 1/8" 3/16" 1/4" 3/8" 1/2" 4 4 4 3 3 3 3 3 2 2 2 2 2 1 1 2 2 2 1 1 1 60 6 Inch Cut Pieces 2 2 2 1 1 Green 1 1 1 1 1 SPECIFICATIONS UL Standard 499: ( FIT(R) MINIGU N ) (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products SHRINKABLE TUBING ASSORTMENTS (R) FIT KITS-1, 2, 7 (R) ALPHA FIT KITS: (R) For Use in Research and Development Labs, Engineering Development and Maintenance Departments 136 FIT(R) KIT-1 CONTENTS - GENERAL PURPOSE INDOOR APPLICATIONS Alpha Part No. Sizes (assorted colors) Material FI T -105 Vinyl FI T -221 Polyolefin FI T -295 Semi-Rigid Polyolefin FI T -300 Surface Irradiated Polyolefin FI T -350 Kynar** FI T CRIMPS 1, 2, 3 CAP 22, 23, 24 No. 6 In. Lengths 9 sizes 3/64" - 3/4" 9 sizes 3/64" - 3/4" 8 sizes 3/64" - 1/2" 5 sizes 1/8" - 1/2" 7 sizes 3/64" - 3/8" 22 AWG - 10 AWG 18 19 12 10 14 3 pcs 6 pcs FIT(R) KIT-2 CONTENTS - GENERAL PURPOSE INDOOR OR OUTDOOR APPLICATIONS Alpha Part No. See Page 137 For Multi-Functional Heat Guns See Page 138 For FIT(R) FBT-1 Flameless Butane Torch Material FI T -105 Vinyl FI T -221 Polyolefin FI T -295 Semi-Rigid Polyolefin FI T -300 Surface Irradiated Polyolefin FI T -350 Kynar** FI T CRIMPS 1, 2, 3 CAP 22, 23, 24 FI T -321 Adhesive-Lined Polyolefin FI T -400 FEP Teflon* FI T -500 TFE Teflon* FI T -600 Elastomer FI T -700 Mastic Lined Cable Sleeves FI T -750 Adhesive Lined Cable Sleeves Sizes (assorted colors) No. Lengths 6 In. 1 In. 9 sizes 3/64" - 3/4" 9 sizes 3/64" - 3/4" 8 sizes 3/64" - 1/2" 5 sizes 1/8" - 1/2" 7 sizes 3/64" - 3/8" 22 AWG - 10 AWG 18 19 12 10 14 3 pcs 6 pcs 2 sizes 1/4" - 1/2" 16 6 sizes 12 - 24 AWG 22 5 sizes 18 - 26 AWG 17 5 sizes 1/4" - 1" 8 2 sizes 21, 22 2 1 size 3/8" -- -- -- -- -- -- -- -- 24 -- -- -- -- 10 FIT(R) KIT-7 CONTENTS - GENERAL PURPOSE INDOOR OR OUTDOOR APPLICATIONS **Teflon(R) is a registered trademark of E.I. DuPont **Kynar(R) is a registered trademark of ELF Atochem North America, Inc. Alpha Part No. Material Sizes (assorted colors) FI T -105 FI T -400 FI T -221 FI T -750 FI T -260 FI T -300 FI T -321 FI T -350 FI T CRIMPS Vinyl FEP Teflon* 2:1 Polyolefin Adhesive Lined Polyolefin Ground Lead Polyolefin Surface Irradiated Polyolefin 3:1 Polyolefin Kynar** Shrink Nylon Crimps 7 sizes 1/6" - 1/2" 7 sizes 24 - 12 7 sizes 1/16" - 1/2" 5 sizes 1/4" - 1" 3 sizes 1/8" - 1/2" 4 sizes 1/2" - 3/8" 3 sizes 1/8" - 1/2" 7 sizes 3/64" - 1/2" 3 sizes 1-3 Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 No. 6 In. Lengths 14 14 28 10 6 8 6 14 12 pcs Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com (R) UL STANDARD 499 CSA C22.2 NO. 88 Preferred Heat Shrink Products MULTI-FUNCTIONAL HEAT GUNS FIT GUN-1 AND FIT GUN-3 (R) (R) CHOOSE FIT GUNS FOR: (R) All Alpha FIT(R) Shrinkable Products Two Temperature Settings CHARACTERISTICS TEMPERATURE SETTINGS: FIT(R) GUN-1: Low: 300C (570F) High: 566C (1050F) FIT(R) GUN-3: Low: 400C (750F) High: 585C (1090F) COLOR DESCRIPTION: FIT(R) GUN-1: Blue/Black FIT(R) GUN-3: Blue PHYSICAL PROPERTIES: FIT(R) GUN-1: Cord Length: 6.5 Ft. (1,98 mm) Net Weight: 1.6 Lbs. (0,73 kg) FIT(R) GUN-3: Cord Length: 6.0 Ft. (1,82 mm) Net Weight: 1.5 Lbs. (0,68 kg) ELECTRICAL REQUIREMENTS: Voltage: 120 Volt Power: FIT(R) GUN-1: 1400 watts FIT(R) GUN-3: 1200 watts Current: FIT(R) GUN-1: 11.6 amps FIT(R) GUN-3: 10.0 amps 137 FIT GUN-1 (R) DURABLE, EFFICIENT AND MULTI-FUNCTIONAL. FIT(R) GUN-1 is a two-temperature heat gun that is well balanced and lightweight to minimize operator fatigue. Depending on the application, the FIT(R) GUN-1 has a dual temperature setting by means of a 3-position rocker switch. The low setting is at 300C (570F) while the high temperature is rated at 566C (1050F). The body frame is manufactured of a high impact resistant plastic housing. The ceramic encapsulated heating element, brushless D.C. motor and impeller designed fan blades make this gun ideal for industrial use. Equipped with a built-in slip-resistant stand and hook reflector nozzle attachment. FIT GUN-3 (R) ECONOMICAL AND MULTI-FUNCTIONAL. FIT(R) GUN-3 is a two-temperature heat gun that is lightweight in design. Depending on the application, the FIT(R) GUN-3 has a dual temperature setting by means of a 3-position slider switch. The low setting is at 400C (750F) while the high temperature is rated at 585C (1090F). The body frame is manufactured of a durable plastic housing. Equipped with a built-in ring stand and hanger, concentrator nozzle and hook reflector nozzle attachments. SPECIFICATIONS UL Standard 499 CSA C22.2 No. 88 (R) Web Site: www.alphawire.com Email: info@alphawire.com Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products POWERFUL FLAMELESS BUTANE TORCH (R) FIT FBT-1 (R) CHOOSE FIT FBT-1 FOR: (R) Where High Volume Flameless Heat is Required Portable Flameless Heat Repair Adjustable Temperature Control FIT(R) Preferred Heat Shrink Tubing Applications FIT FBT-1 APPLICATIONS: (R) Maintenance/Repair Marine Automotive Aircraft 138 CHARACTERISTICS OPERATING TEMPERATURE: Up to 750C (1400F) COLOR DESCRIPTION: Blue PHYSICAL PROPERTIES: Length: 190mm (7.5 in) Weight: (when gas-filled) 135 g Nozzle Size: I.D.: 14mm (0.55 in) O.D.: 20mm (0.79 in) Operating Time (one gas filling): Approximately 120 minutes at Mid Setting CHEMICAL PROPERTIES: Butane Container Capacity: 20ml Refill: Standard Butane Fuel AVAILABILITY One Piece Per Package New! NOZZLE BARREL THIS TOOL HAS BEEN ESPECIALLY DESIGNED FOR USE WITH 100% BUTANE GAS. GAS CONTROL LEVER - + ANY OTHER BUTANEPROPANE MIX OR OTHER FUEL GASES SHOULD NOT BE USED. ON/OFF IGNITION SWITCH TO INSURE SAFE OPERATION WHEN USING THE FIT(R) FBT-1, PLEASE READ ALL INSTRUCTIONS CAREFULLY PRIOR TO USE. GAS TANK BUTANE IS NOT INCLUDED. FILLING Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products MOLDED IRRADIATED POLYOLEFIN END CAPS (R) CHOOSE END CAPS FOR: Moisture Resistance Abrasion Resistance END CAP APPLICATIONS: Wire Terminations Splice Terminations 139 CHARACTERISTICS OPERATING TEMPERATURE: -55C to 135C SHRINKAGE RATIO: Approximately 2 to 1 at 135C Alpha Part No. COLOR DESCRIPTION: All Standard Packages: Black CAP-21 CAP-22 PHYSICAL PROPERTIES: CAP-23 Tensile Strength: 2500 psi, CAP-24 (176 kg/cm2 ) CAP-25 Ultimate Elongation: 300% CAP-26 Specific Gravity: 1.25 CAP-27 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.1% ELECTRICAL PROPERTIES: Dielectric Strength: 700V/mil (276 kV/cm) Volume Resistivity: 1015 ohm-cm Web Site: www.alphawire.com Email: info@alphawire.com Minimum Supplied I.D. Inches mm 0.20 0.29 0.40 0.60 0.81 1.00 1.55 5,08 7,37 10,16 15,24 20,57 25,40 39,37 Maximum Rec. I.D. Inches mm 0.08 0.12 0.18 0.25 0.37 0.45 0.71 2,03 3,05 4,57 6,35 9,40 11,43 18,03 Nom. Rec. Wall Thickness Inches mm 0.04 0.05 0.06 0.07 0.08 0.09 0.10 1,02 1,27 1,52 1,78 2,03 2,29 2,54 Nominal Length Inches mm 0.90 1.00 1.20 1.60 2.40 2.70 3.60 22,86 25,40 30,48 40,64 60,96 68,58 91,44 Standard Package 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products MOLDED IRRADIATED POLYOLEFIN BOOTS (R) FIT -BOOTS (R) CHOOSE FIT -BOOTS FOR: (R) Connector Protection Environmental Seal FIT -BOOT APPLICATIONS: (R) 140 D-Subminiature Connector Protection Cable/Connector Strain Relief Minimum Supplied I.D. Inches mm CHARACTERISTICS OPERATING TEMPERATURE: -55C to 135C SHRINKAGE TEMPERATURE: 121C COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 1500 psi, (106 kg/cm2 ) Ultimate Elongation: 200% Specific Gravity: 1.35 Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Fungus Resistance: No Growth Water Absorption: 0.5% ELECTRICAL PROPERTIES: Dielectric Strength: 200V/mil (70 kV/cm) Volume Resistivity: 1014 ohm-cm Alpha Part No. FI T -D BOOT-9 FI T -D BOOT-15 FI T -D BOOT-25 FI T -D BOOT-37 0.42 0.42 0.42 0.42 Maximum Rec. I.D. Inches mm 10,7 10,7 10,7 10,7 0.15 0.15 0.20 0.22 3,8 3,8 5,1 5,6 Nominal Length Inches Standard Package Pieces 1.20 1.53 2.11 2.72 10, 100 10, 100 10, 100 10, 100 Alpha's heat shrinkable D-subminiature FIT(R) -B OOTS are designed to provide a solution to the strain relief of a D sub connector. Strain relief is achieved by a heat shrinkable adhesive coated collar which protects cables when tensioned, and provides added sealing protection. The boot is supplied as a single piece which snaps on to the back of the connector. There are no small parts and no tools required. Jack screws are provided to ensure easy access into each connector. FIT(R) -"D" BOOTS are flame retardant to UL94V2, and are available in four sizes, with 9 to 37 pin connectors. SIDE ENTRY CONNECTORS END ENTRY CONNECTORS Alpha Part No. Fits Conn. Expanded Type Std. ("A") Cannon Pkg. Inches mm Cinch Pcs. Alpha Part No. FI T -BOOT-6 FI T -BOOT-7 FI T -BOOT-8 FI T -BOOT-9 FI T -BOOT-10 0.31 0.40 0.55 0.68 0.75 FI T -BOOT-11 FI T -BOOT-12 FI T -BOOT-13 FI T -BOOT-14 FI T -BOOT-15 7,87 10,16 13,97 17,27 19,05 DE-9 DA-15 DB-25 DC-37 DD-50 1 1 1 1 1 Fits Conn. Expanded Type Std. ("A") Cannon Pkg. Inches mm Cinch Pcs. 0.31 0.40 0.55 0.68 0.75 7,87 10,16 13,97 17,27 19,05 DE-9 DA-15 DB-25 DC-37 DD-50 1 1 1 1 1 Designed specifically for subminiature rectangular connectors manufactured by ITT-Cannon and Cinch. FIT(R) -BOOTS replace metal molds and potting forms used on molded harnesses. FIT(R) -BOOTS provide a strain relief and seal out contaminents. The boots are molded of a heat shrinkable, irradiated modified polyolefin compound with excellent physical and electrical properties. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products HEAT SHRINKABLE IDENTIFICATION SYSTEM (R) FIT -PRINT UL STANDARD 224 (R) CHOOSE FIT -PRINT FOR: (R) Identification for Cable or Harness Assemblies Permanent/Smear-Resistant Marking Bright Yellow for High Visibility or White FIT -PRINT APPLICATIONS: (R) 141 Marine Electronics Industrial Computers Electrical Equipment CHARACTERISTICS OPERATING TEMPERATURE: -30C to 105C SHRINKAGE RATIO: Approximately 3 to 1 at 125C COLOR DESCRIPTION: Yellow or White PHYSICAL PROPERTIES: Tensile Strength: 1200 psi Ultimate Elongation: 150% Longitudinal Shrinkage: -20% Flammability: Self-Extinguishing CHEMICAL PROPERTIES: Corrosive Effect: Non-Corrosive Water Absorption: 0.5% ELECTRICAL PROPERTIES: Dielectric Strength: 500V/mil SPECIFICATIONS UL Standard 224 (R) AVAILABILITY 250 tubing pieces per package Web Site: www.alphawire.com Email: info@alphawire.com Alpha Part No. FI T -PRINT-1/8 FI T -PRINT-1/4 FI T -PRINT-1/2 FI T -PRINT-1 Approx. Wire Minimum Maximum Gauge (AWG) Supplied I.D. Rec. I.D. Min. Max. Inches mm Inches mm 22 16 8 2 16 8 2 400 0.125 3,2 0.250 6,4 0.500 12,7 1.000 25,4 0.042 0.083 0.166 0.333 1,0 2,1 4,2 8,4 Rec. Wall Thickness Inches Recom. Use Range Non Sleeve Progression 0.0230.003 0.0230.003 0.0240.003 0.0250.003 0.044 to 0.105 0.091 to 0.215 0.183 to 0.425 0.366 to 0.850 0.500 0.666 1.166 2.000 PERMANENT WIRE IDENTIFICATION Alpha's FIT(R) -PRINT Markers are designed to economically meet the wire identification needs of the electronic interconnect, industrial, computer office automation, marine and electrical markets. Made of irradiated modified polyolefin tubing with a 3:1 shrink ratio, these sleeves are designed for smear-resistant, permanent identification. The sleeves feed directly into standard typewriters or dot matrix printers. For best results, use a ribbon with a high carbon content and for write-on convenience, a standard ball point pen may also be used. Alpha's FIT(R) -PRINT Identification System can personalize and customize all cable assemblies without large inventory costs or special equipment. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products FIT(R) WRAP SHRINKABLE POLYOLEFIN REPAIR (R) FIT -RP MIL-I-23053/15A (R) CHOOSE FIT WRAP FOR: (R) 142 Environmental Seal Moisture Barrier Corrosion, Fungus Resistance 600 Volt Cable Seal FIT WRAP APPLICATIONS: (R) Cable Jacket Repair When Cable Disconnect is Impossible CHARACTERISTICS OPERATING TEMPERATURE: -55C to 110C SHRINKAGE RATIO: Approximately 3 to 1 at 120C Depending Upon Size COLOR DESCRIPTION: All Standard Packages: Black PHYSICAL PROPERTIES: Tensile Strength: 3340 psi, (236 kg/cm2 ) Ultimate Elongation: 620% Specific Gravity: 0.94 Water Absorption: 0.1% CHEMICAL PROPERTIES: Fungus Resistance: No Growth Chemical Resistance: Hydraulic Fluid (MIL-H-5606C), Lubricating Oil (MIL-L-7808G) and Diesel Fuel Corrosive Effect: Non Corrosive ELECTRICAL PROPERTIES: Dielectric Strength: 790V/mil (311 kV/cm) Volume Resistivity: 1015 ohm-cm Alpha Part No. Minimum Rec. Diameter Range Inches mm Maximum Rec. Diameter Range Inches mm Flat Length Inches Standard Package Pieces FI T -RP806R FI T -RP808R 0.25 0.25 6,35 6,35 1.20 1.20 30,48 30,48 6 8 1 1 FI T -RP1106R FI T -RP1108R 0.60 0.60 15,24 15,24 1.80 1.80 45,72 45,72 6 8 1 1 FI T -RP1806R FI T -RP1808R 0.95 0.95 24,13 24,13 2.70 2.70 68,58 68,58 6 8 1 1 SPECIFICATIONS ASTM - D638 ASTM - G21 ASTM - D570 Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com MIL-F-14256, TYPE RMA FLUX (105 C SERIES) QQ-S-571, SOLDER (125 C SERIES) CHOOSE FIT -SLV FOR: (R) Water Resistant Protection Heavy-Duty Splice Connection FIT -SLV APPLICATIONS: (R) Shield to Ground Terminations CHARACTERISTICS OPERATING TEMPERATURE: 105C Series - 105C 125C Series - 125C COLOR DESCRIPTION: All Standard Packages: Transparent PHYSICAL PROPERTIES: Tensile Strength: Ground Lead Breakage 25 Lb. (20 AWG) Solder Melt Temperature: 105C Series: 145C 125C Series: 180C ELECTRICAL PROPERTIES: Dielectric Strength: 2000 Volt Insulation Resistance: 5 x 109 ohms Voltage Drop: 2.5 Millivolts SPECIFICATIONS MIL-F-14256, Type RMA Flux (105C Series) QQ-S-571, Solder (125C Series) Preferred Heat Shrink Products SHRINKABLE SOLDERING SLEEVES (R) FIT -SLV (R) BRAID SHIELD GROUNDING SYSTEM Alpha's FIT(R) Soldering Sleeve is a one piece, shield ground termination system featuring a strong, lowcost soldered connection which is completely insulated and encapsulated. It consists of a heat-shrinkable thermoplastic sleeve containing a precisely engineered preform of fluxed solder and thermoplastic inserts at each end. When placed over a cable shield and heated, the solder melts and flows, connecting the ground lead and shield. The outer sleeve shrinks and the thermoplastic inserts melt, encapsulating the termination. The result is a perfectly soldered, strain-relieved and environmentally protected termination. Solder preform assures exact quantity of solder and flux, producing optimum solder connections for maximum strength, lowest voltage drop. Transparent heat-shrinkable insulating sleeve allows inspection of termination, provides long-life strain relief. Meltable inserts insure complete environmental protection. 105C Series: Kynar* insulating sleeve containing solder alloy preform of 51.2% Tin, 30.6% Lead, 18.2% Cadmium 125C Series: Kynar* insulating sleeve containing preform of SN-63 composed of 63% Tin, 37% Lead 105C SERIES Alpha Part No. E Max Inches mm Cable Dimensions F Min Inches mm FI T -SLV-12 FI T -SLV-14 FI T -SLV-16 0.125 0.200 0.300 0.055 0.100 0.160 3,2 5,1 7,6 2. Find appropriate Alpha Part No. and sleeve size in the cable and sleeve dimensions chart. Web Site: www.alphawire.com Email: info@alphawire.com 1,4 2,5 4,0 L Nom. Inches mm Cable Dimensions A Min Inches mm Std. B Min Package Inches mm Pieces 0.620 0.620 0.750 0.125 0.200 0.300 0.110 0.180 0.280 15,8 15,8 19,1 3,2 5,1 7,6 2,8 4,6 7,1 25, 100 25, 100 25, 100 125C SERIES Alpha Part No. E Max Inches mm Cable Dimensions F Min Inches mm FI T -SLV-22 FI T -SLV-24 FI T -SLV-26 0.125 0.200 0.300 0.055 0.100 0.160 3,2 5,1 7,6 1,4 2,5 4,0 L Nom. Inches mm Cable Dimensions A Min Inches mm Std. B Min Package Inches mm Pieces 0.620 0.620 0.750 0.125 0.200 0.300 0.110 0.180 0.280 15,8 15,8 19,1 3,2 5,1 7,6 2,8 4,6 7,1 25, 100 25, 100 25, 100 *Kynar(R) is a registered trademark of ELF Atochem North America, Inc. SELECTION GUIDE 1. Measure maximum diameter (E) and minimum diameter (F) of combined cable and ground lead. 143 E F Window Strip Solder Preform Sealing Rings Sealing Rings B A E F End Strip L Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products SHRINKABLE NYLON CRIMP SPLICES (R) FIT CRIMP (R) CHOOSE FIT CRIMP FOR: (R) Water and Corrosion Resistant Protection Strain Relief FIT CRIMP APPLICATIONS: (R) 144 Marine Electronics/Electrical Connections Appliance Manufacturing Mass Transit Wiring Systems Petroleum/Chemical Industries CHARACTERISTICS OPERATING TEMPERATURE: -55C to 125C SHRINKAGE RATIO: Approximately 2 to 1 at 180C COLOR DESCRIPTION: FIT(R) CRIMP 1: Red FIT(R) CRIMP 2: Blue FIT(R) CRIMP 3: Yellow PHYSICAL PROPERTIES: Cut-Through Resistance: 70 Lbs. (31 kg) Wire Pullout:** FIT(R) CRIMP 1: 25 Lbs. (11 kg) FIT(R) CRIMP 2: 50 Lbs. (23 kg) FIT(R) CRIMP 3: 60 Lbs. (27 kg) Heat Aging: 168 Hours at 160C, No Cracking Not Flame Retardant CHEMICAL PROPERTIES: Solvent Resistance: Isopropyl Alcohol, Trichloroethylene, Gasoline, Battery Acid, Diesel Fuel, Motor Oil, Anti-Freeze, Brake Fluid, 5% Salt Water ELECTRICAL PROPERTIES: Dielectric Strength: 2500 Volts Insulation Resistance: 103 megohms Alpha Part No. FI T CRIMP 1 FI T CRIMP 2 FI T CRIMP 3 AWG Range of Barrel Min. Max. 22 16 12 18 14 10 Minimum Supplied I.D. Inches mm Maximum Rec. I.D. Inches mm 0.145 0.180 0.250 0.060 0.080 0.118 3,86 4,57 6,35 1,52 2,03 2,99 Standard Package Pieces 25, 100, 500 25, 100, 500 25, 100, 500 ENVIRONMENTALLY SEALED, BUTT CONNECTIONS 1. Select splice of appropriate size. Strip wires 0.3". Insert into crimp barrel. 2. Crimp using Alpha AT-255* crimp tool for preinsulated crimps. 3. Heat splice with heat gun until tubing recovers and adhesive flows. Alpha's heat-shrinkable pre-insulated crimp splices completely seal electrical connections from corrosion caused by water, salts and other contaminants. Unlike conventional splices, these adhesive-lined butt connectors provide a strong reinforced connection. They are lightweight and easy to install, too. Simply insert the wires. The sleeve's transparent nylon insulation lets you inspect wire location and position your crimping tool fast. Crimp the splice and then shrink and seal it with a common heat gun or other heat source. Reliable sealing plus quick and easy installation add up to protection you can count on whenever wire splices are required, including automobile and truck wiring, outdoor electrical equipment, marine equipment, telecommunications equipment, recreational equipment and household appliances. *For details on the Alpha AT-255 Crimp Tool, see page 286 (R) **After crimping and recovery. Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Web Site: www.alphawire.com Email: info@alphawire.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Preferred Heat Shrink Products FIT HEAT SHRINK TUBING CROSS REFERENCE (R) (R) ALPHA WIRE PAGE NO. SUMITOMO RAYCHEM 3M CANUSA PANDUIT INSULTAB MANHATTAN/COLEFLEX FIT-221 114 B2, A2 RNF-100 FP-301 CPX-100 HSTT, HSTTM HS-101 ST221/ST219 FIT-221B 116 B2, A2 RNF-100 FP-301 CPX-100 HSTT HS-101 ST221/ST219 FIT-221V 117 B2 VERSAFIT 2:1 FP301VW CPX-876 HSTTV HS-101 STF221 FIT-105 118 V HSTTP HS-105 ST100 FIT-260 119 FIT-321V 120 W3B2(3X) VERSAFIT 3:1 FIT-321 121 W3B2 ATUM 3:1 EPS-300 HSTTA HS-101MV3:1 ST303 FIT-421 122 W3B2(4X) RP-4800 FIT-621 123 FIT-295 124 B8 CRN SR-350 HSTTR HS-101SR ST295 FIT-300 125 W5DL SCL MW HSTTRA HS-101MV ST300 FIT-700 126 SST ITCS, MDT FIT-750 127 O2B2 TAT-125 EPS-200 HSTTVA HS-101MV2:1 ST302 FIT-350 128 K KYNAR KYNAR HSTTK HSK-600 ST350 FIT-400 129 FIT-500 130 FIT-600 131 R10 NT, NTFR NST FIT-650 132 FE3 VITON VTN200 FIT FLEX 134 SRFR CAP 139 101A0XX FIT-SLV 143 S01-XX-R/S02-XX-R FIT-BOOTS 140 214A0XX,234A0XX FIT FABRIC 133 HFT5000,HFT3000 FIT WRAP 142 FIT CRIMP 144 D406 FIT-PRINT 141 TMS-SCE (21-25) DCPT Web Site: www.alphawire.com Email: info@alphawire.com GYS CPX-300 145 HRNF CFW SPC HSTTF ST400 ST500 HSTTN HSN-100 ST700 HS-VTN ST650 ST675 CRLS MH-18,14,106 D406-XXXX Toll Free: 1-800-52 ALPHA * Telephone: 908-925-8000 * Fax: 908-925-6923 Europe/UK Telephone: +44 (0) 1932 772422 * Europe/UK Fax: +44 (0) 1932 772433 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 146 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com