Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1 EE-SX47/67 Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity for built-in application. Series includes models that enable switching between dark-ON and light-ON operation. Response frequency as high as 1 kHz. Easy operation monitoring with bright light indicator. Wide operating voltage range: 5 to 24 VDC Models in which the light indicator turns ON for dark-ON operation are also available. A wide range of variations in eight different shapes. Flexible robot cable is provided as a standard feature. *2 Be sure to read Safety Precautions on page 8. *1. Only the EE-SX67 Series has pre-wired models. *2. Only for Pre-wired Models. Ordering Information Connector models Appearance Infrared light Sensing Connectmethod ing method Sensing distance Standard L-shaped Closemounting T-shaped, slot center: 10 mm Model NPN output PNP output Dark-ON/Light-ON Incident light (selectable) *3 No incident light EE-SX670 EE-SX670P EE-SX670A EE-SX670R Light-ON Incident light EE-SX470 EE-SX470P Dark-ON/Light-ON Incident light (selectable) *3 No incident light EE-SX671 EE-SX671P EE-SX671A EE-SX671R Light-ON EE-SX471 EE-SX471P EE-SX672 EE-SX672P EE-SX672A EE-SX672R Light-ON EE-SX472 EE-SX472P Dark-ON/Light-ON Incident light (selectable) *3 No incident light EE-SX673 EE-SX673P EE-SX673A EE-SX673R Light-ON Incident light EE-SX473 EE-SX473P (slot width) Dark-ON/Light-ON Incident light Closemounting Connector (4 poles) Indicator mode Dark-ON/Light-ON Incident light (selectable) *3 No incident light T-shaped Throughbeam type (with slot) Output configuration 5 mm Incident light Incident light EE-SX674 EE-SX674P (selectable) *3 No incident light EE-SX674A EE-SX674R Light-ON Incident light EE-SX474 EE-SX474P Dark-ON/Light-ON Incident light (selectable) *3 EE-SX675 EE-SX675P Dark-ON/Light-ON Incident light (selectable) *3 EE-SX676 EE-SX676P Dark-ON/Light-ON Incident light (selectable) *3 EE-SX677 EE-SX677P F-shaped R-shaped *3. These models can be used as Light-ON when the L terminal and positive (+) terminal are connected to each other. To use them as Dark-ON, do not connect these terminals to each other. When used at light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are short-circuited in advance. 4 EE-SX47/67 Pre-wired Models and Models Appearance Sensing method Infrared light Sensing distance Output configuration Indicator mode Connecting method Model NPN output PNP output Standard EE-SX670-WR EE-SX670P-WR EE-SX671-WR EE-SX671P-WR EE-SX672-WR EE-SX672P-WR EE-SX673-WR EE-SX673P-WR EE-SX674-WR EE-SX674P-WR EE-SX675-WR EE-SX675P-WR EE-SX676-WR EE-SX676P-WR EE-SX677-WR EE-SX677P-WR L-shaped T-shaped, slot center: 7 mm Closemounting Throughbeam type (with slot) Closemounting Dark-ON/ Incident 5 mm Light-ON (slot width) (selectable) * light Pre-wired models (1 m) T-shaped, slot center: 10 mm F-shaped R-shaped * These models can be used as Light-ON when the L line and positive (+) line are connected to each other. To use them as Dark-ON, do not connect these lines to each other. Accessories for Models with Connectors (Order Separately) Type Cable length Connector 1m Connector with Cable 2m Connector with Robot Cable Connector Hold-down Clip 1m 2m Model EE-1001 EE-1001-1 EE-1009 EE-1006 EE-1010 EE-1006 EE-1010 EE-1010-R EE-1010-R EE-1006A Remarks L terminal and positive (+) terminal are already short-circuited. For EE-1006 only. 5 EE-SX47/67 Ratings and Specifications T-shaped, slot T-shaped, slot Close-mounting F-shaped center: 7 mm center: 10 mm EE-SX670 EE-SX671 EE-SX672 EE-SX673 EE-SX674 EE-SX676 EE-SX670A EE-SX671A EE-SX672A EE-SX673A EE-SX674A EE-SX675 NPN Connector EE-SX470 EE-SX471 EE-SX472 EE-SX473 EE-SX474 models Pre-wired EE-SX670- EE-SX671- EE-SX672- EE-SX673- EE-SX674- EE-SX675- EE-SX676models WR WR WR WR WR WR WR EE-SX670P EE-SX671P EE-SX672P EE-SX673P EE-SX674P EE-SX670R EE-SX671R EE-SX672R EE-SX673R EE-SX674R EE-SX675P EE-SX676P PNP Connector EE-SX470P EE-SX471P EE-SX472P EE-SX473P EE-SX474P models Pre-wired EE-SX670P- EE-SX671P- EE-SX672P- EE-SX673P- EE-SX674P- EE-SX675P- EE-SX676PItem models WR WR WR WR WR WR WR Sensing distance 5 mm (slot width) Sensing object Opaque: 2 x 0.8 mm min. Differential distance 0.025 mm Light source GaAs infrared LED with a peak wavelength of 940 nm Indicator *1 Light indicator (red) (turns ON when light is interrupted for models with A or R suffix) Supply voltage 5 to 24 VDC 10%, ripple (p-p): 10% max. Current consumption 35 mA max. (NPN models), 30 mA max. (PNP models) NPN open collector: 5 to 24 VDC, 100 mA max. 100 mA load current with a residual voltage of 0.8 V max. Control output 40 mA load current with a residual voltage of 0.4 V max. PNP open collector: 5 to 24 VDC, 50 mA max. 50 mA load current with a residual voltage of 1.3 V max. Response frequency *2 1 kHz min. (3 kHz average) Ambient illumination 1,000 lx max. with fluorescent light on the surface of the receiver. Ambient temperature range Operating: -25 to +55C, Storage: -30 to +80C Ambient humidity range Operating: 5% to 85%, Storage: 5% to 95% Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2) Vibration resistance 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions Enclosure rating IEC60529 IP50 Connecting method Special connectors (direct soldering possible), Pre-wired models (Standard cable length: 1 m) Connector Approx. 3.1 g Approx. 3 g Approx. 2.4 g Approx. 2.3 g Approx. 3 g Approx. 2.7 g Approx. 2.2 g Weight (packPre-wired Approx. 18.9 g Approx. 17.3 g Approx. 17.8 g Approx. 16.8 g Approx. 17.1 g Approx. 18.3 g Approx. 16.9 g aged) models Polybutylene phthalate (PBT) Ma- Case terial Cover emitter/receiver Polycarbonate Type Standard L-shaped *1. The indicator is a GaP red LED (peak wavelength: 690 nm). *2. The response frequency was measured by detecting the rotating disk shown at the right. Disk 1 mm 2.1 mm 1 mm t = 0.2 mm 6 R-shaped EE-SX677 EE-SX677WR EE-SX677P EE-SX677PWR Approx. 2.2 g Approx. 16.9 g EE-SX47/67 Engineering Data (Typical) Dark-ON Tr ON Repeated Sensing Position Characteristics Sensing Position Characteristics Dark-ON Tr ON d Output level transistor Sensing Position Characteristics OFF d2 d3 d1 d4 d d5 d ON Tr OFF 0 1.0 2.0 3.0 4.0 5.0 Tr OFF 0 6.0 1.0 2.0 3.0 4.0 Distance d (mm) 5.0 0 6.0 Distance d (mm) Ta = -25C Ta = 55C Ta = 25C 3.00 3.02 3.04 3.06 3.08 Distance d (mm) Vcc =12 V, No. of repetitions: 20, d1 = 0.002 mm, d2 = 0.004 mm, d3 = 0.005 mm, d4 = 0.02 mm, d5 = 0.04 mm I/O Circuit Diagrams NPN Output Model Output configuration Timing chart Terminal connection Light-ON Incident Interrupted ON Light indicator (red) OFF ON Output transistor OFF Operates Load (e.g., relay) Releases Short-circuited between L terminal and positive terminal Dark-ON Incident Interrupted ON Light indicator (red) OFF ON Output transistor OFF Operates Load (e.g., relay) Releases Open between L terminal and positive terminal EE-SX67@ EE-SX67@-WR Light-ON Incident Interrupted ON Light indicator (red) OFF Output transistor ON OFF Operates Load (e.g., relay) Releases EE-SX670A EE-SX671A EE-SX672A EE-SX673A EE-SX674A Output circuit Light indicator (red) 1 L 2 Main circuit Short-circuited between L terminal and positive terminal 4 OUT IC Load 5 to 24 VDC (Control output) 100 mA max. 3 Incident Dark-ON Interrupted ON Light indicator (red) OFF ON Output transistor OFF Open between L terminal and positive terminal Operates Load (e.g., relay) Releases EE-SX470 EE-SX471 EE-SX472 EE-SX473 EE-SX474 Light-ON Incident Interrupted ON Light indicator (red) OFF Output transistor ON Light indicator (red) Load --- Main circuit OUT IC 5 to 24 VDC OFF Operates Load (e.g., relay) Releases 7 EE-SX47/67 PNP Output Output configuration Model Timing chart Incident Interrupted Light-ON Light indicator (red) ON OFF ON OFF Operates Output transistor Terminal connection Output circuit Short-circuited between L terminal and positive terminal Load (e.g., relay) Releases EE-SX67@P EE-SX67@P-WR Incident Interrupted Dark-ON Light indicator (red) ON OFF ON OFF Operates Output transistor Open between L terminal and positive terminal Light indicator (red) 1 L Load (e.g., relay) Releases Incident Interrupted Light-ON Output transistor ON OFF ON OFF Operates Load (e.g., relay) Releases EE-SX670R EE-SX671R EE-SX672R EE-SX673R EE-SX674R EE-SX470P EE-SX471P EE-SX472P EE-SX473P EE-SX474P Light indicator (red) Dark-ON Incident Interrupted ON Light indicator (red) OFF ON Output transistor OFF Operates Load (e.g., relay) Releases Light-ON Incident Interrupted ON Light indicator (red) OFF ON Output transistor OFF Operates Load (e.g., relay) Releases 2 Main circuit 4 Short-circuited between L terminal and positive terminal OUT IC 5 to 24 VDC Load 3 Open between L terminal and positive terminal Light indicator (red) --- 5 to 24 VDC OUT IC Main circuit Load Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Make sure that this product is used within the rated ambient environment conditions. Installation * When direct soldering to the terminals, use the following guidelines. Precautions for Safe Use Operating Environment These Photomicrosensors have an IP50 (conforms to IEC60529) enclosure and do not have a water-proof or dust-proof structure. Therefore, do not use them in applications in which the sensor will be subjected to splashes from water, oil, or any other liquid. Liquid entering the Sensor may result in malfunction. Soldering Conditions Item Soldering iron Temperature 350C max. Permissible time Remarks 3s max. The portion between the base of the terminals and the position 1.5 mm from the terminal base must not be soldered. * The terminal base uses a polycarbonate resin, which could be deformed by excessive soldering heat, resulting in damage to the product's functionality. Lot Numbers and Models In the right illustration, 376d indicates the lot number and factory where the product was manufactured. Do not include this code with the model number when ordering. EE-SX@70@ Model number EE-SX670 376d Lot number and factory code 8 EE-SX47/67 Dimensions (Unit: mm) Sensors EE-SX670/670P EE-SX670A/670R EE-SX470/470P EE-SX671/671P EE-SX671A/671R EE-SX471/471P Terminal Arrangement (1) Terminal Arrangement Vcc (1) L L* (2) L L* (3) OUT OUTPUT (3) OUT OUTPUT (4) GND (0 V) (4) * L Terminal needs no connection for all EE-SX47@ series sensors. GND (0 V) * L Terminal needs no connection for all EE-SX47@ series sensors. 26.2 19 25.4 19 Vcc (2) Four, R2 3.2 Two, 3.2 dia. holes 14.5 3 6.95 Four, R1 3 Four, R1 19 13.4 5 6.2 6.4 0.8 3.8 Indicator window 1 2 3 4 2.54 13 9 2 Optical axis 5 3 8.4 13.8 2.5 9 13.2 3.8 1 2 3 4 EE-SX672/672P EE-SX672A/672R EE-SX472/472P 13 13.4 19 0.7 (1) 0.6 EE-SX673/673P EE-SX673A/673R EE-SX473/473P Vcc 15.5 7.2 6.2 0.7 3.6 Terminal Arrangement 2 2.1 0.3 7.2 0.3 2.54 Optical axis Two, 3.2 dia. holes 8.3 9 Two, 3.8 dia. holes Indicator window 5.5 6.2 6.35 0.8 13.4 6.95 Terminal Arrangement (1) Vcc (2) L L* (2) L L* (3) OUT OUTPUT (3) OUT OUTPUT (4) GND (0 V) (4) * L Terminal needs no connection for all EE-SX47@ series sensors. GND (0 V) * L Terminal needs no connection for all EE-SX47@ series sensors. 13.7 3 26 12.6 6.4 6.3 12.8 (6.65) 3.5 Two, R1 7 13.4 0.8 4.3 Indicator window 3 Four, R1.6 22.2 0.8 Optical axis 9 13 13.4 5 5 2 Two, 3.2 dia. holes 7 8.4 2 Optical axis 9 14.4 22.2 6.2 6.3 6.2 4.9 3.8 2.5 6.2 1 0.3 3.8 Indicator window 2 3 4 0.7 19 2.8 6.3 2.5 Four, R1 2.54 13 1 2 3 4 2.54 0.3 0.7 9 EE-SX47/67 EE-SX674/674P EE-SX674A/674R EE-SX474/474P EE-SX675/675P Terminal Arrangement (1) Terminal Arrangement Vcc (1) Vcc (2) L L* (2) L L (3) OUT OUTPUT (3) OUT OUTPUT GND (0 V) (4) (4) GND (0 V) * L Terminal needs no connection for all EE-SX47@ series sensors. 16.7 Two, R1 4 Optical axis Two, 3.5 dia. holes 7 Indicator window 6.35 26 7 10 21.5 6.95 3 3 0.8 13.4 5 3.8 6.2 2 1 3 Detection window 4 2.54 Optical axis 9 Indicator window 2 13 5 13 0.8 3.7 (R) (R) 22.2 Optical axis (9.3) 2.1 2 6.3 3.2 2.6 0.7 3.8 6.2 0.7 6.2 0.3 1 2 3 4 2.54 19.5 0.6 13.6 2.5 15.5 0.3 3 8.4 6 (2.9) 13 16.7 EE-SX676/676P EE-SX677/677P Terminal Arrangement (1) Terminal Arrangement Vcc (1) Vcc (2) L L (2) L L (3) OUT OUTPUT (3) OUT OUTPUT GND (0 V) (4) (4) GND (0 V) 13.7 13.7 Optical axis Optical axis 2.5 2.5 13.2 7 13.2 6.35 6.35 13.4 7 7 0.8 5 7 Detection window 13.4 5 0.8 Optical axis Optical axis 9 Indicator window 22.2 8.4 2 9 9 2 22.2 3 13.6 8.4 Detection window 7 2.5 3.3 3.8 3.3 2.54 Two, 3.5 dia. holes 0.7 6.2 0.3 0.3 1 2 3 4 10 3 7 13.6 2.5 6.2 Indicator window 9 0.7 Two, 3.5 dia. holes 3.8 1 2 3 4 2.54 EE-SX47/67 EE-SX670-WR/670P-WR EE-SX671-WR/671P-WR Terminal Arrangement Terminal Arrangement Brown Vcc Brown Pink L Pink L Blue GND (0 V) Blue GND (0 V) Black OUTPUT Black OUTPUT R1 Vcc 26.2 Optical axis R3.5 Optical axis 19 6.95 3.2 6.95 19 3.2 dia. holes 3 R1 18.7 3 25.4 Indicator window 13.4 6.35 Optical axis 5 2 0.8 2 9 Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m 13.4 11.2 Detection window 13.8 3 8.4 26.2 6.35 13.4 5 11 Optical axis Detection window 0.8 5.5 2.5 2 9 3.8 dia. holes 4.6 dia. holes 2 Indicator window 15.5 Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m EE-SX672-WR/672P-WR 4.6 dia. holes 9 6.2 2.8 7.2 3.6 19 3.2 dia. holes EE-SX673-WR/673P-WR Terminal Arrangement Terminal Arrangement Brown Vcc Brown Pink L Pink Vcc L Blue GND (0 V) Blue GND (0 V) Black OUTPUT Black OUTPUT 13.7 7 Optical axis 12.6 6.3 12.8 Optical axis R1 3 (6.65) 3.5 7 5 6.35 2 2.5 13 9 Optical axis 14.4 9 4.3 R1.6 Indicator window 26.2 8.4 8.9 10.3 2.5 R1 2 Detection window 2 dia. holes 26.2 6.2 0.8 Optical axis 13.4 5 0.8 Detection window 3.2 dia. holes 13.4 2.8 Indicator window 3 2 2 4.6 dia. holes 19 26 Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m 4.6 dia. holes Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m 11 EE-SX47/67 EE-SX674-WR/674P-WR 3.5 dia. holes EE-SX675-WR/675P-WR Terminal Arrangement Terminal Arrangement Brown Vcc Brown Pink L Pink L Blue GND (0 V) Blue GND (0 V) Black OUTPUT Black OUTPUT 10 Optical axis R1 7 Vcc 6.35 26 7 4 7 6.95 25.7 Optical 3 axis 13.4 5 19.5 3 0.8 Detection window Optical axis 2 Indicator window (R) 13 Optical axis 3.2 3.7 0.8 Detection window (2.9) 9 2.5 10.3 (R) 2 4.6 dia. holes 2 4.6 dia. holes 15.5 Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m 2.6 6.2 2.8 EE-SX676-WR/676P-WR 3 26.2 8.4 6 13.6 5 Indicator window 9 2 Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m EE-SX677-WR/677P-WR Terminal Arrangement 13.4 16.7 Terminal Arrangement Brown Vcc Brown Pink L Pink Vcc L Blue GND (0 V) Blue GND (0 V) Black OUTPUT Black OUTPUT Optical axis Optical axis 2.5 2.5 7 7 13.7 13.7 13.2 6.4 13.2 Optical axis 6.4 13.4 5 Detection window 7 Detection window 13.4 5 7 Indicator window 9 9 8.4 3 2 0.8 9 0.8 9 26.2 8.4 7 26.2 13 2.5 13 7 3.3 2.5 4 3.3 Indicator window 4 3.5 dia. holes 2 4.6 dia. holes 12 3.5 dia. holes Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m Optical axis 2 4.6 dia. holes 2 Robot cable with 2.8 dia., 4 conductors, (conductor cross-section: 0.15 mm2, insulator diameter: 0.8 mm); Standard length: 1 m 3 EE-SX47/67 EE-SX47/67 Connector Hold-down Clips Connector EE-1001 Connector (short-circuited between positive (+) and L terminals) 13 EE-1001-1 13 2.54 0.15 4 4 0.6 0.6 5 1.4 10.8 10.8 6 6 2.5 3 0.3 Connector with Cable EE-1006 2.54 0.8 2.8 0.1 1.5 3.9 0.4 2.9 1 Connector Hold-down Clip EE-1006A 11.8 2.54 R3 25.2 19 12 3.6 3.2 5.3 5.5 0.4 7.62 Four, R1.6 3.4 0.6 5.5 3 3 2.1 4 3 2 1 10.2 16.2 21.9 19.4 15 1.2 20 (R1) 2000 Cable: Vinyl-insulated round cable of 4 dia., 4 cores, (0.2 mm2 with 1.1-dia. insulator) Terminal Arrangement (1) Connector with Cable EE-1010 Connector with Robot Cable EE-1010-R 25 Brown (2) L Pink (3) OUT Black (4) 2 Materials: Stainless steel 13 7.62 2.54 4 0.6 Blue 4 3 2 1 1.4 5 Two, C1 2.5 13.5 15 Connector EE-1009 EE-1010 cable EE-1010-R cable: Vinyl-insulated round cable of 4 dia., 4 cores, (0.2 mm2 with 1.1-dia. insulator) 20 5 2000 Two, C1 13 4 0.6 5 1.4 2.5 25 5 9 Terminal Arrangement 4.5 (1) 1.2 0.8 1.5 2.5 2.54 7.62 Brown (2) L Pink (3) OUT Black (4) Blue 15 5 In the interest of product improvement, specifications are subject to change without notice. 13 This document provides information mainly for selecting suitable models. Please read the Instruction sheet carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON ELECTRONICS LLC * THE AMERICAS HEADQUARTERS * Schaumburg, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 www.omron247.com OMRON ARGENTINA * SALES OFFICE Cono Sur * 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br OMRON CHILE * SALES OFFICE Santiago * 56.9.9917.3920 OMRON ELECTRONICS MEXICO SA DE CV * HEAD OFFICE Apodaca, N.L. * 52.811.156.99.10 * 001.800.556.6766 * mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 Omron Europe B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.industrial.omron.eu Cat. No. E382-E1-EESX4767 08/10 Note: Specifications are subject to change. (c) 2010 Omron Electronics LLC Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: EE-1001-1