TLP621,TLP621-2,TLP621-4 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP621,TLP621-2,TLP621-4 Programmable Controller AC / DC-Input Module Solid State Relay Unit in mm The TOSHIBA TLP621, -2 and -4 consists of a photo-transistor optically coupled to a gallium arsenide infrared emitting diode. The TLP621-2 offers two isolated channels in an eight lead plastic DIP, which the TLP621-4 provides four isolated channels in a sixteen plastic DIP. * Collector-emitter voltage: 55 V (min.) * Current transfer ratio: 50% (min.) TOSHIBA 11-5B2 Weight: 0.26 g (typ.) Rank GB: 100% (min.) Pin Configurations (top view) TLP621-2 TLP621 TLP621-4 1 4 1 8 1 16 2 3 2 7 2 15 3 6 3 14 4 5 4 13 5 12 6 11 7 10 8 9 1: Anode 2: Cathode 3: Emitter 4: Collector 1, 3: Anode 2, 4: Cathode 5, 7: Emitter 6, 8: Collector TOSHIBA 11-10C4 Weight: 0.54 g (typ.) 1, 3, 5, 7: Anode 2, 4, 6, 8: Cathode 9, 11, 13, 15: Emitter 10, 12, 14, 16: Collector TOSHIBA 11-20A3 Weight: 1.1 g (typ.) 1 2007-10-01 TLP621,TLP621-2,TLP621-4 Current Transfer Ratio Type TLP621 TLP621-2 TLP621-4 Classi- fication *1 Current Transfer Ratio (%) (IC / IF) IF = 5mA, VCE = 5V, Ta = 25C Marking Of Classification Min. Max. (None) 50 600 Blank, Y, Y , G, G , B, B , GB Rank Y 50 150 Y, Y Rank GR 100 300 G, G Rank BL 200 600 B, B Rank GB 100 600 G, G , B, B , GB (None) 50 600 Blank, GR, BL, GB Rank GB 100 600 GR, BL, GB *1: Ex. rank GB: TLP621 (GB) (Note) Application type name for certification test, please use standard product type name, i.e. TLP621 (GB): TLP621 TLP621-2 (GB): TLP621-2 Made In Japan Made In Thailand UL recognized E67349 *2 E152349 *2 BSI approved 6508, 7445 *3 6505, 7445 *3 SEMKO approved 9735090 / 01 *4 *2 *3 *4 UL1577 BS EN60065: 2002, BS EN60950-1: 2002 EN60950 (approved is TLP621 only) 2 2007-10-01 TLP621,TLP621-2,TLP621-4 * Option (D4) type VDE approved: DIN EN 60747-5-2, certificate no. 40009302 Maximum operating insulation voltage: 890 VPK Highest permissible over voltage: 8000 VPK (Note) * When a EN 60747-5-2 approved type is needed, please designate the "Option (D4)" Creepage distance Clearance Insulation thickness 7.62 mm pich standard type : 6.4 mm (min.) : 6.4 mm (min.) : 0.4 mm (min.) 10.16 mm pich (LF2) type 8.0 mm (min) 8.0 mm (min) 0.4 mm (min) 3 2007-10-01 TLP621,TLP621-2,TLP621-4 Absolute Maximum Ratings (Ta = 25C) Rating Characteristic Symbol Forward current LED Forward current derating TLP621-2 TLP621-4 Unit IF 60 50 mA IF /C -0.7 (Ta > 39C) -0.5 (Ta = 25C) mA /C Pulse forward current IFP 1 (100s pulse, 100pps) Power dissipation PD 100 70 mW PD /C -1.0 -0.7 mW /C Power dissipation derating Detector TLP621 A Reverse voltage VR 5 V Junction temperature Tj 125 C Collector-emitter voltage VCEO 55 V Emitter-collector voltage VECO 7 V Collector current IC 50 mA Collector power dissipation (1 circuit) PC 150 100 mW PC /C -1.5 -1.0 mW /C Collector power dissipation derating (1 circuit, Ta 25C) Junction temperature Tj 125 C Storage temperature range Tstg -55~125 C Operating temperature range Topr -55~100 C Lead soldering temperature Tsol 260 (10 s) C Total package power dissipation PT 250 150 mW PT /C -2.5 -1.5 mW /C Total package power dissipation derating (Ta 25C) Isolation voltage (Note 1) BVS 5000 (AC, 1min., R.H. 60%) Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Device considered a two terminal: LED side pins shorted together, and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VCC 5 24 V Forward current IF 16 20 mA Collector current IC 1 10 mA Topr -25 85 C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 4 2007-10-01 TLP621,TLP621-2,TLP621-4 Individual Electrical Characteristics (Ta = 25C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V -- -- 10 A Capacitance CT V = 0, f = 1 MHz -- 30 -- pF Collector-emitter breakdown voltage V(BR) CEO IC = 0.5 mA 55 -- -- V Emitter-collector breakdown voltage V(BR) ECO IE = 0.1 mA 7 -- -- V VCE = 24 V -- 10 100 nA VCE = 24 V, Ta = 85C -- 2 50 A V = 0, f = 1 MHz -- 10 -- pF MIn. Typ. Max. Unit 50 -- 600 100 -- 600 -- 60 -- 30 -- -- -- -- 0.4 -- 0.2 -- -- -- 0.4 Min. Typ. Max. Unit -- 0.8 -- pF -- Collector dark current ICEO Capacitance (collector to emitter) CCE Coupled Electrical Characteristics (Ta = 25C) Characteristic Current transfer ratio Saturated CTR Symbol IC / IF IC / IF (sat) Test Condition IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 0.4 V Rank GB Rank GB IC = 2.4 mA, IF = 8 mA Collector-emitter saturation voltage VCE (sat) IC = 0.2 mA, IF = 1 mA Rank GB % % V Isolation Characteristics (Ta = 25C) Characteristic Capacitance (input to output) Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V AC, 1 minute Isolation voltage BVS 12 1x10 10 14 5000 -- -- AC, 1 second, in oil -- 10000 -- DC, 1 minute, in oil -- 10000 -- 5 Vrms Vdc 2007-10-01 TLP621,TLP621-2,TLP621-4 Switching Characteristics (Ta = 25C) Characteristic Symbol Rise time tr Fall time tf Turn-on time ton Test Condition Min. Typ. Max. -- 2 -- -- 3 -- -- 3 -- VCC = 10 V, IC = 2 mA RL = 100 Turn-off time toff -- 3 -- Turn-on time tON -- 2 -- -- 15 -- -- 25 -- Storage time tS Turn-off time tOFF RL = 1.9 k (Fig.1) VCC = 5 V, IF = 16 mA Unit s s Fig. 1 Switching time test circuit IF RL IF VCC tS VCE VCC 4.5V VCE 0.5V tON 6 tOFF 2007-10-01 TLP621,TLP621-2,TLP621-4 100 80 80 Allowable forward current IF (mA) Allowable forward current IF (mA) 100 60 40 20 0 -20 0 20 40 60 Ambient temperature TLP621 80 Ta 100 40 20 (C) 0 20 40 TLP621-2 TLP621-4 PC - Ta 120 200 100 160 120 80 40 0 20 40 TLP621 120 (C) PC - Ta 60 40 60 80 Ta 100 0 -20 120 0 20 40 TLP621-2 TLP621-4 IFP (mA) 1000 500 Pulse forward current 300 100 50 30 3 10-2 3 Duty cycle ratio 10-1 3 (C) Ta = 25C 500 300 100 50 30 10-3 3 10-2 3 Duty cycle ratio 7 120 1000 3 DR Ta 100 Pulse width 100s 10 100 80 IFP - DR 3000 Pulse width 100s 10-3 60 Ambient temperature (C) Ta = 25C IFP (mA) Ta 100 80 IFP - DR 3000 Pulse forward current 80 20 Ambient temperature 10 3 60 Ambient temperature 240 0 -20 IF - Ta 60 0 -20 120 Allowable collector power dissipation PC (mW) Allowable collector power dissipation PC (mW) TLP621-2 TLP621-4 IF - Ta TLP621 10-1 3 100 DR 2007-10-01 TLP621,TLP621-2,TLP621-4 IF - V F 100 VF / Ta - IF Ta = 25C Forward voltage temperature coefficient VF / Ta (mV /C) Forward current IF (mA) 50 30 10 5 3 1 0.5 0.3 0.1 0.4 0.6 1.0 0.8 1.2 Forward voltage VF 1.4 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1.6 1 0.3 (V) Forward current IFP - VFP ID (A) 100 50 Dark current IFP (mA) Pulse forward current Ta = 25C 30 10 5 3 1.2 0.8 1.6 Pulse forward voltage 2.0 VFP 100 10-1 10-2 10-3 10-4 0 2.4 10V 5V VCE = 24V (V) Ambient temperature IC (mA) 30mA 20mA Collector current IC (mA) Collector current 50mA 15mA PC (MAX.) 20 IF = 5mA 2 4 8 6 Collector-emitter voltage VCE 50mA 25 60 10mA Ta 160 (C) IC - VCE Ta = 25C 40 120 80 40 IC - VCE 80 0 0 (mA) 101 Pulse width 10s 500 Repetitive 300 Frequency = 100Hz 0.4 IF 30 ID - Ta 1000 1 0 10 3 30mA 20mA 20 15 10mA 10 5mA 5 IF = 2mA 0 0 10 0.2 0.4 0.6 0.8 Collector-emitter voltage (V) 8 Ta = 25C 40mA 1.0 VCE 1.2 1.4 (V) 2007-10-01 TLP621,TLP621-2,TLP621-4 IC - IF IC / IF - IF 500 VCE = 5V 30 VCE = 0.4V IC / IF (%) Ta = 25C 50 10 Sample A Current transfer ratio Collector current IC (mA) 100 5 3 Sample B 1 0.5 0.3 300 Sample A 100 Sample B 50 30 Ta = 25C VCE = 5V VCE = 0.4V 10 5 0.3 1 3 Forward current 0.1 30 10 100 IF (mA) 0.05 0.03 0.3 1 3 10 Forward current 30 VCE (sat) - Ta 100 0.20 IF (mA) IF = 5mA Collector-emitter saturation Voltage VCE (sat) (V) IC = 1mA IC - Ta 100 VCE = 5V 30 10mA 0.12 0.08 0.04 5mA 10 0 0 -20 5 20 40 80 60 Ambient temperature Ta 100 (C) 3 Switchingtime - RL 1mA 1000 1 0.5 500 IF = 0.5mA 0.1 (s) 0.3 -20 0 20 40 Ambient temperature 60 Ta 80 (C) 100 Switching time Collector current IC (mA) 25mA 50 0.16 Ta = 25C IF = 16mA VCC = 5V 300 tOFF 100 50 ts 30 10 5 tON 3 1 1 3 10 Load resistance 9 30 RL 100 300 (k) 2007-10-01 TLP621,TLP621-2,TLP621-4 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 10 2007-10-01