Document 109-1 7 mm Tunable RF Coils - 146, 150 Coilcraft tunable coils provide the compactness of a 7 mm coil and the low drift reliability of an insert molded coil. Standard inductance values range from less than 50 nH to over 500 nH. 150 Series coils with a tap are also available to meet specific requirements. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Optional plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability. These parts can be ordered without cores for use as fixed inductors. Coilcraft Designer's Kit M302 contains samples of all standard 7 mm and 10 mm tunable inductors. To order, contact Coilcraft or visit http://order.coilcraft.com. Unshielded Styles 0.268 0.005 square 6,81 mm 0,13 0.177 0.005 4,5 0,13 0.138 0.040 3,5 1,02 0.450 0.020 11,43 0,51 Start 0.177 0.005 4,5 0,13 Finish 0.020 0.002 0,51 0.05 dia With Shield Can 0.300 max 7,6 0.475 12,1 max Recommended Board Layout 0.280 Tab centers 7,1 0.039 0.010 1,0 0,25 0.0885 2,25 0.060 (for shield 1,52 can tabs) Start CL 0.0885 2,25 0.216 5,5 dia hole 0.138 0.010 3,51 0,25 Tab length 0.040 (2) 1,016 Finish CL 0.140 3,55 Dimensions are in Terminations: Series 146 leads: Tin-silver over copper Series 150 leads: Matte tin over copper Shield can tabs: Tin-silver over nickel over brass Resistance to soldering heat: Wave solder only. Recommended maximum board surface temperature of 168C (334F) for no more than three seconds. Pre-heating is recommended to minimize time over the solder nozzle. Unshielded Weight: 146 series 0.44 - 0.70 g 150 series 0.45 - 0.61 g Packaging: 80 per tube US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg inches mm With shield can 0.91 - 1.12 g 0.88 - 1.08 g 75 per tube Document 109-1 Revised 09/30/08 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 109-2 7mm Tunable RF Coils - 146, 150 Series IN 1 TRITUNER 3 TOOLS SEE INDEX TUNING WRENCH Unshielded Part number1 Color Turns 150-01J08L 150-02J08L 150-03J08L 150-04J08L 150-05J08L 150-06J08L 150-07J08L 146-01J08L 146-02J08L 146-03J08L 146-04J08L 146-05J08L 146-06J08L 146-07J08L 146-08J08L 146-09J08L 146-10J08L Brown Red Orange Yellow Green Blue Violet Brown Red Orange Yellow Green Blue Violet Gray White Black 11/2 21/2 31/2 41/2 51/2 61/2 71/2 11/2 21/2 31/2 41/2 51/2 61/2 71/2 81/2 91/2 101/2 No core L2 nom (nH) L min3 (nH) L nom (nH) 44.5 58.5 77.5 94.5 116 138 156 45.0 65.0 86.0 111 140 167 198 228 264 292 46.0 62.0 82.0 108 137 176 222 47.0 68.0 90.0 117 148 188 231 272 330 390 49.0 70.0 98.0 130 165 205 245 50.0 78.0 108 146 190 240 292 342 405 465 No core L2 nom (nH) L min3 (nH) L nom (nH) 42.5 54.0 68.0 82.5 95.5 109 123 44.0 59.0 75.0 95.0 115 136 155 176 202 224 43.5 56.0 71.0 86.0 107 125 150 45.0 62.0 80.0 100 120 142 172 200 234 260 44.5 60.0 76.0 95.0 115 134 156 46.0 65.0 85.0 110 135 163 194 224 260 288 L max (nH) Q min @ L nom 52.0 88 @ 50 MHz 78.0 100 @ 50 MHz 114 108 @ 50 MHz 154 114 @ 50 MHz 193 114 @ 50 MHz 234 112 @ 50 MHz 268 108 @ 50 MHz 53.0 90 @ 50 MHz 88.0 100 @ 50 MHz 126 100 @ 50 MHz 175 94 @ 50 MHz 232 88 @ 50 MHz 292 78 @ 50 MHz 350 72 @ 50 MHz 412 68 @ 50 MHz 480 66 @ 40 MHz 540 60 @ 40 MHz No core SRF DCR max min (MHz) (mOhm) 2000 1300 1000 780 650 550 510 1300 780 560 475 430 390 350 330 320 290 8.0 9.0 10.5 11.6 13.2 14.7 16.0 8.0 9.0 10.5 11.6 13.0 14.5 15.6 18.0 19.4 21.0 Irms4 (A) 11.0 10.5 9.8 9.3 8.7 8.2 7.9 11.0 10.5 9.8 9.3 8.8 8.3 8.0 7.5 7.2 6.8 Shielded Part number1 Color Turns 150-01J08SL 150-02J08SL 150-03J08SL 150-04J08SL 150-05J08SL 150-06J08SL 150-07J08SL 146-01J08SL 146-02J08SL 146-03J08SL 146-04J08SL 146-05J08SL 146-06J08SL 146-07J08SL 146-08J08SL 146-09J08SL 146-10J08SL Brown Red Orange Yellow Green Blue Violet Brown Red Orange Yellow Green Blue Violet Gray White Black 11/2 21/2 31/2 41/2 51/2 61/2 71/2 11/2 21/2 31/2 41/2 51/2 61/2 71/2 81/2 91/2 101/2 1. To order fixed inductance parts without cores, eliminate the "J08", e.g. 150-01L or 150-01SL 2. Inductance and Q readings taken on Boonton 260-A Q meter with 16 AWG tinned copper 1/2 long soldered along leads and bent at 90 1/4 down from standoffs. All inductance values greater than 0.1 H read at recommended Q meter frequency. All inductance values below 0.1 H calculated from readings taken at 50 MHz. L max (nH) Q min @ L nom 44.5 72 @ 50 MHz 64.0 80 @ 50 MHz 81.0 84 @ 50 MHz 104 85 @ 50 MHz 123 84 @ 50 MHz 143 82 @ 50 MHz 162 80 @ 50 MHz 47.0 76 @ 50 MHz 68.0 78 @ 50 MHz 90.0 78 @ 50 MHz 120 78 @ 50 MHz 150 76 @ 50 MHz 184 72 @ 50 MHz 216 68 @ 50 MHz 248 66 @ 50 MHz 284 60 @ 50 MHz 315 56 @ 50 MHz 3. 4. 5. 6. 7. 8. No core SRF DCR max min (MHz) (mOhm) 1900 1450 1100 900 750 620 560 1550 850 660 570 510 470 430 400 360 330 8.0 9.0 10.5 11.6 13.2 14.7 16.0 8.0 9.0 10.5 11.6 13.0 14.5 15.6 18.0 19.4 21.0 Irms4 (A) 11.0 10.5 9.8 9.3 8.7 8.2 7.9 11.0 10.5 9.8 9.3 8.8 8.3 8.0 7.5 7.2 6.8 L min measured with core halfway out top of form. Average current for a 40C rise above 25C ambient. Core material: Carbonyl J; Core length: 1/4 Taps available in 150 series parts at 1/8, 3/8, 5/8 and 7/8 turns. Operating temperature range -40C to +85C. Electrical specifications at 25C. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 109-2 Revised 09/30/08 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 150-04J08SL 146-08J08L 146-06J08L 150-01J08L 150-01J08SL 146-02J08L 146-04J08SL 146-01J08L 14610J08L 146-03J08SL 146-07J08SL 150-05J08SL 146-09J08L 150-04J08L 150-02J08SL 146-03J08L 14608J08SL 146-05J08SL 150-02J08L 146-01J08SL 150-07J08SL 150-06J08SL 146-10J08SL 150-06J08L 15003J08SL 146-05J08L 146-04J08L 146-07J08L 150-03J08L 146-09J08SL 150-05J08L 150-07J08L 146-02J08SL 146-06J08SL